- 16 Feb, 2018 1 commit
-
-
Michael Kelley authored
for_each_cpu_wrap() was originally added in the #else half of a large "#if NR_CPUS == 1" statement, but was omitted in the #if half. This patch adds the missing #if half to prevent compile errors when NR_CPUS is 1. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Michael Kelley <mhkelley@outlook.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kys@microsoft.com Cc: martin.petersen@oracle.com Cc: mikelley@microsoft.com Fixes: c743f0a5 ("sched/fair, cpumask: Export for_each_cpu_wrap()") Link: http://lkml.kernel.org/r/SN6PR1901MB2045F087F59450507D4FCC17CBF50@SN6PR1901MB2045.namprd19.prod.outlook.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 15 Feb, 2018 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes all across the map: - /proc/kcore vsyscall related fixes - LTO fix - build warning fix - CPU hotplug fix - Kconfig NR_CPUS cleanups - cpu_has() cleanups/robustification - .gitignore fix - memory-failure unmapping fix - UV platform fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm, mm/hwpoison: Don't unconditionally unmap kernel 1:1 pages x86/error_inject: Make just_return_func() globally visible x86/platform/UV: Fix GAM Range Table entries less than 1GB x86/build: Add arch/x86/tools/insn_decoder_test to .gitignore x86/smpboot: Fix uncore_pci_remove() indexing bug when hot-removing a physical CPU x86/mm/kcore: Add vsyscall page to /proc/kcore conditionally vfs/proc/kcore, x86/mm/kcore: Fix SMAP fault when dumping vsyscall user page x86/Kconfig: Further simplify the NR_CPUS config x86/Kconfig: Simplify NR_CPUS config x86/MCE: Fix build warning introduced by "x86: do not use print_symbol()" x86/cpufeature: Update _static_cpu_has() to use all named variables x86/cpufeature: Reindent _static_cpu_has()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 PTI and Spectre related fixes and updates from Ingo Molnar: "Here's the latest set of Spectre and PTI related fixes and updates: Spectre: - Add entry code register clearing to reduce the Spectre attack surface - Update the Spectre microcode blacklist - Inline the KVM Spectre helpers to get close to v4.14 performance again. - Fix indirect_branch_prediction_barrier() - Fix/improve Spectre related kernel messages - Fix array_index_nospec_mask() asm constraint - KVM: fix two MSR handling bugs PTI: - Fix a paranoid entry PTI CR3 handling bug - Fix comments objtool: - Fix paranoid_entry() frame pointer warning - Annotate WARN()-related UD2 as reachable - Various fixes - Add Add Peter Zijlstra as objtool co-maintainer Misc: - Various x86 entry code self-test fixes - Improve/simplify entry code stack frame generation and handling after recent heavy-handed PTI and Spectre changes. (There's two more WIP improvements expected here.) - Type fix for cache entries There's also some low risk non-fix changes I've included in this branch to reduce backporting conflicts: - rename a confusing x86_cpu field name - de-obfuscate the naming of single-TLB flushing primitives" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) x86/entry/64: Fix CR3 restore in paranoid_exit() x86/cpu: Change type of x86_cache_size variable to unsigned int x86/spectre: Fix an error message x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping selftests/x86/mpx: Fix incorrect bounds with old _sigfault x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]() x86/speculation: Add <asm/msr-index.h> dependency nospec: Move array_index_nospec() parameter checking into separate macro x86/speculation: Fix up array_index_nospec_mask() asm constraint x86/debug: Use UD2 for WARN() x86/debug, objtool: Annotate WARN()-related UD2 as reachable objtool: Fix segfault in ignore_unreachable_insn() selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c selftests/x86: Fix build bug caused by the 5lvl test which has been moved to the VM directory selftests/x86/pkeys: Remove unused functions selftests/x86: Clean up and document sscanf() usage selftests/x86: Fix vDSO selftest segfault for vsyscall=none x86/entry/64: Remove the unused 'icebp' macro ... -
Ingo Molnar authored
Josh Poimboeuf noticed the following bug: "The paranoid exit code only restores the saved CR3 when it switches back to the user GS. However, even in the kernel GS case, it's possible that it needs to restore a user CR3, if for example, the paranoid exception occurred in the syscall exit path between SWITCH_TO_USER_CR3_STACK and SWAPGS." Josh also confirmed via targeted testing that it's possible to hit this bug. Fix the bug by also restoring CR3 in the paranoid_exit_no_swapgs branch. The reason we haven't seen this bug reported by users yet is probably because "paranoid" entry points are limited to the following cases: idtentry double_fault do_double_fault has_error_code=1 paranoid=2 idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK idtentry machine_check do_mce has_error_code=0 paranoid=1 Amongst those entry points only machine_check is one that will interrupt an IRQS-off critical section asynchronously - and machine check events are rare. The other main asynchronous entries are NMI entries, which can be very high-freq with perf profiling, but they are special: they don't use the 'idtentry' macro but are open coded and restore user CR3 unconditionally so don't have this bug. Reported-and-tested-by:
Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by:
Andy Lutomirski <luto@kernel.org> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180214073910.boevmg65upbk3vqb@gmail.comSigned-off-by:
-
Gustavo A. R. Silva authored
Currently, x86_cache_size is of type int, which makes no sense as we will never have a valid cache size equal or less than 0. So instead of initializing this variable to -1, it can perfectly be initialized to 0 and use it as an unsigned variable instead. Suggested-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Addresses-Coverity-ID: 1464429 Link: http://lkml.kernel.org/r/20180213192208.GA26414@embeddedor.comSigned-off-by:
-
Dan Carpenter authored
If i == ARRAY_SIZE(mitigation_options) then we accidentally print garbage from one space beyond the end of the mitigation_options[] array. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-janitors@vger.kernel.org Fixes: 9005c683 ("x86/spectre: Simplify spectre_v2 command line parsing") Link: http://lkml.kernel.org/r/20180214071416.GA26677@mwandaSigned-off-by:
-
Jia Zhang authored
x86_mask is a confusing name which is hard to associate with the processor's stepping. Additionally, correct an indent issue in lib/cpu.c. Signed-off-by:
Jia Zhang <qianyue.zj@alibaba-inc.com> [ Updated it to more recent kernels. ] Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.comSigned-off-by:
-
Rui Wang authored
For distributions with old userspace header files, the _sigfault structure is different. mpx-mini-test fails with the following error: [root@Purley]# mpx-mini-test_64 tabletest XSAVE is supported by HW & OS XSAVE processor supported state mask: 0x2ff XSAVE OS supported state mask: 0x2ff BNDREGS: size: 64 user: 1 supervisor: 0 aligned: 0 BNDCSR: size: 64 user: 1 supervisor: 0 aligned: 0 starting mpx bounds table test ERROR: siginfo bounds do not match shadow bounds for register 0 Fix it by using the correct offset of _lower/_upper in _sigfault. RHEL needs this patch to work. Signed-off-by:Rui Wang <rui.y.wang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@linux.intel.com Fixes: e754aedc ("x86/mpx, selftests: Add MPX self test") Link: http://lkml.kernel.org/r/1513586050-1641-1-git-send-email-rui.y.wang@intel.comSigned-off-by:
-
Andy Lutomirski authored
flush_tlb_single() and flush_tlb_one() sound almost identical, but they really mean "flush one user translation" and "flush one kernel translation". Rename them to flush_tlb_one_user() and flush_tlb_one_kernel() to make the semantics more obvious. [ I was looking at some PTI-related code, and the flush-one-address code is unnecessarily hard to understand because the names of the helpers are uninformative. This came up during PTI review, but no one got around to doing it. ] Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Hugh Dickins <hughd@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linux-MM <linux-mm@kvack.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/3303b02e3c3d049dc5235d5651e0ae6d29a34354.1517414378.git.luto@kernel.orgSigned-off-by:
-
Peter Zijlstra authored
Joe Konno reported a compile failure resulting from using an MSR without inclusion of <asm/msr-index.h>, and while the current code builds fine (by accident) this needs fixing for future patches. Reported-by:
Joe Konno <joe.konno@linux.intel.com> Signed-off-by:
-
Will Deacon authored
For architectures providing their own implementation of array_index_mask_nospec() in asm/barrier.h, attempting to use WARN_ONCE() to complain about out-of-range parameters using WARN_ON() results in a mess of mutually-dependent include files. Rather than unpick the dependencies, simply have the core code in nospec.h perform the checking for us. Signed-off-by:
Will Deacon <will.deacon@arm.com> Acked-by:
-
Dan Williams authored
Allow the compiler to handle @size as an immediate value or memory directly rather than allocating a register. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/151797010204.1289.1510000292250184993.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
Peter Zijlstra authored
Since the Intel SDM added an ModR/M byte to UD0 and binutils followed that specification, we now cannot disassemble our kernel anymore. This now means Intel and AMD disagree on the encoding of UD0. And instead of playing games with additional bytes that are valid ModR/M and single byte instructions (0xd6 for instance), simply use UD2 for both WARN() and BUG(). Requested-by:
-
Josh Poimboeuf authored
By default, objtool assumes that a UD2 is a dead end. This is mainly because GCC 7+ sometimes inserts a UD2 when it detects a divide-by-zero condition. Now that WARN() is moving back to UD2, annotate the code after it as reachable so objtool can follow the code flow. Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Josh Poimboeuf authored
Peter Zijlstra's patch for converting WARN() to use UD2 triggered a bunch of false "unreachable instruction" warnings, which then triggered a seg fault in ignore_unreachable_insn(). The seg fault happened when it tried to dereference a NULL 'insn->func' pointer. Thanks to static_cpu_has(), some functions can jump to a non-function area in the .altinstr_aux section. That breaks ignore_unreachable_insn()'s assumption that it's always inside the original function. Make sure ignore_unreachable_insn() only follows jumps within the current function. Reported-by:
-
Dominik Brodowski authored
The ldt_gdt and ptrace_syscall selftests, even in their 64-bit variant, use hard-coded 32-bit syscall numbers and call "int $0x80". This will fail on 64-bit systems with CONFIG_IA32_EMULATION=y disabled. Therefore, do not build these tests if we cannot build 32-bit binaries (which should be a good approximation for CONFIG_IA32_EMULATION=y being enabled). Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kselftest@vger.kernel.org Cc: shuah@kernel.org Link: http://lkml.kernel.org/r/20180211111013.16888-6-linux@dominikbrodowski.netSigned-off-by:
-
Dominik Brodowski authored
On 64-bit builds, we should not rely on "int $0x80" working (it only does if CONFIG_IA32_EMULATION=y is enabled). To keep the "Set TF and check int80" test running on 64-bit installs with CONFIG_IA32_EMULATION=y enabled, build this test only if we can also build 32-bit binaries (which should be a good approximation for that). Signed-off-by:
-
- 14 Feb, 2018 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 fix from Bob Peterson: "Fix regressions in the gfs2 iomap for block_map implementation we recently discovered in commit 3974320c" * tag 'gfs2-4.16.rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fixes to "Implement iomap for block_map"
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "A larger batch of fixes than we'd like. Roughly 1/3 fixes for new code, 1/3 fixes for stable and 1/3 minor things. There's four commits fixing bugs when using 16GB huge pages on hash, caused by some of the preparatory changes for pkeys. Two fixes for bugs in the enhanced IRQ soft masking for local_t, one of which broke KVM in some circumstances. Four fixes for Power9. The most bizarre being a bug where futexes stopped working because a NULL pointer dereference didn't trap during early boot (it aliased the kernel mapping). A fix for memory hotplug when using the Radix MMU, and a fix for live migration of guests using the Radix MMU. Two fixes for hotplug on pseries machines. One where we weren't correctly updating NUMA info when CPUs are added and removed. And the other fixes crashes/hangs seen when doing memory hot remove during boot, which is apparently a thing people do. Finally a handful of build fixes for obscure configs and other minor fixes. Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Balbir Singh, Colin Ian King, Daniel Henrique Barboza, Florian Weimer, Guenter Roeck, Harish, Laurent Vivier, Madhavan Srinivasan, Mauricio Faria de Oliveira, Nathan Fontenot, Nicholas Piggin, Sam Bobroff" * tag 'powerpc-4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix to use ucontext_t instead of struct ucontext powerpc/kdump: Fix powernv build break when KEXEC_CORE=n powerpc/pseries: Fix build break for SPLPAR=n and CPU hotplug powerpc/mm/hash64: Zero PGD pages on allocation powerpc/mm/hash64: Store the slot information at the right offset for hugetlb powerpc/mm/hash64: Allocate larger PMD table if hugetlb config is enabled powerpc/mm: Fix crashes with 16G huge pages powerpc/mm: Flush radix process translations when setting MMU type powerpc/vas: Don't set uses_vas for kernel windows powerpc/pseries: Enable RAS hotplug events later powerpc/mm/radix: Split linear mapping on hot-unplug powerpc/64s/radix: Boot-time NULL pointer protection using a guard-PID ocxl: fix signed comparison with less than zero powerpc/64s: Fix may_hard_irq_enable() for PMI soft masking powerpc/64s: Fix MASKABLE_RELON_EXCEPTION_HV_OOL macro powerpc/numa: Invalidate numa_cpu_lookup_table on cpu remove
-
- 13 Feb, 2018 21 commits
-
-
Andreas Gruenbacher authored
It turns out that commit 3974320c "Implement iomap for block_map" introduced a few bugs that trigger occasional failures with xfstest generic/476: In gfs2_iomap_begin, we jump to do_alloc when we determine that we are beyond the end of the allocated metadata (height > ip->i_height). There, we can end up calling hole_size with a metapath that doesn't match the current metadata tree, which doesn't make sense. After untangling the code at do_alloc, fix this by checking if the block we are looking for is within the range of allocated metadata. In addition, add a BUG() in case gfs2_iomap_begin is accidentally called for reading stuffed files: this is handled separately. Make sure we don't truncate iomap->length for reads beyond the end of the file; in that case, the entire range counts as a hole. Finally, revert to taking a bitmap write lock when doing allocations. It's unclear why that change didn't lead to any failures during testing. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mipsLinus Torvalds authored
Pull MIPS fix from James Hogan: "A single change (and associated DT binding update) to allow the address of the MIPS Cluster Power Controller (CPC) to be chosen by DT, which allows SMP to work on generic MIPS kernels where the bootloader hasn't configured the CPC address (i.e. the new Ranchu platform)" * tag 'mips_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: CPC: Map registers using DT in mips_cpc_default_phys_base() dt-bindings: Document mti,mips-cpc binding
-
Tony Luck authored
In the following commit: ce0fa3e5 ("x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages") ... we added code to memory_failure() to unmap the page from the kernel 1:1 virtual address space to avoid speculative access to the page logging additional errors. But memory_failure() may not always succeed in taking the page offline, especially if the page belongs to the kernel. This can happen if there are too many corrected errors on a page and either mcelog(8) or drivers/ras/cec.c asks to take a page offline. Since we remove the 1:1 mapping early in memory_failure(), we can end up with the page unmapped, but still in use. On the next access the kernel crashes :-( There are also various debug paths that call memory_failure() to simulate occurrence of an error. Since there is no actual error in memory, we don't need to map out the page for those cases. Revert most of the previous attempt and keep the solution local to arch/x86/kernel/cpu/mcheck/mce.c. Unmap the page only when: 1) there is a real error 2) memory_failure() succeeds. All of this only applies to 64-bit systems. 32-bit kernel doesn't map all of memory into kernel space. It isn't worth adding the code to unmap the piece that is mapped because nobody would run a 32-bit kernel on a machine that has recoverable machine checks. Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave <dave.hansen@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert (Persistent Memory) <elliott@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org #v4.14 Fixes: ce0fa3e5 ("x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages") Signed-off-by:
-
Arnd Bergmann authored
With link time optimizations enabled, I get a link failure: ./ccLbOEHX.ltrans19.ltrans.o: In function `override_function_with_return': <artificial>:(.text+0x7f3): undefined reference to `just_return_func' Marking the symbol .globl makes it work as expected. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
-
mike.travis@hpe.com authored
The latest UV platforms include the new ApachePass NVDIMMs into the UV address space. This has introduced address ranges in the Global Address Map Table that are less than the previous lowest range, which was 2GB. Fix the address calculation so it accommodates address ranges from bytes to exabytes. Signed-off-by:
Mike Travis <mike.travis@hpe.com> Reviewed-by:
Andrew Banman <andrew.banman@hpe.com> Reviewed-by:
Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <russ.anderson@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180205221503.190219903@stormcage.americas.sgi.comSigned-off-by:
-
Progyan Bhattacharya authored
The file was generated by make command and should not be in the source tree. Signed-off-by:
Progyan Bhattacharya <progyanb@acm.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Masayoshi Mizuma authored
When a physical CPU is hot-removed, the following warning messages are shown while the uncore device is removed in uncore_pci_remove(): WARNING: CPU: 120 PID: 5 at arch/x86/events/intel/uncore.c:988 uncore_pci_remove+0xf1/0x110 ... CPU: 120 PID: 5 Comm: kworker/u1024:0 Not tainted 4.15.0-rc8 #1 Workqueue: kacpi_hotplug acpi_hotplug_work_fn ... Call Trace: pci_device_remove+0x36/0xb0 device_release_driver_internal+0x145/0x210 pci_stop_bus_device+0x76/0xa0 pci_stop_root_bus+0x44/0x60 acpi_pci_root_remove+0x1f/0x80 acpi_bus_trim+0x54/0x90 acpi_bus_trim+0x2e/0x90 acpi_device_hotplug+0x2bc/0x4b0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x141/0x340 worker_thread+0x47/0x3e0 kthread+0xf5/0x130 When uncore_pci_remove() runs, it tries to get the package ID to clear the value of uncore_extra_pci_dev[].dev[] by using topology_phys_to_logical_pkg(). The warning messesages are shown because topology_phys_to_logical_pkg() returns -1. arch/x86/events/intel/uncore.c: static void uncore_pci_remove(struct pci_dev *pdev) { ... phys_id = uncore_pcibus_to_physid(pdev->bus); ... pkg = topology_phys_to_logical_pkg(phys_id); // returns -1 for (i = 0; i < UNCORE_EXTRA_PCI_DEV_MAX; i++) { if (uncore_extra_pci_dev[pkg].dev[i] == pdev) { uncore_extra_pci_dev[pkg].dev[i] = NULL; break; } } WARN_ON_ONCE(i >= UNCORE_EXTRA_PCI_DEV_MAX); // <=========== HERE!! topology_phys_to_logical_pkg() tries to find cpuinfo_x86->phys_proc_id that matches the phys_pkg argument. arch/x86/kernel/smpboot.c: int topology_phys_to_logical_pkg(unsigned int phys_pkg) { int cpu; for_each_possible_cpu(cpu) { struct cpuinfo_x86 *c = &cpu_data(cpu); if (c->initialized && c->phys_proc_id == phys_pkg) return c->logical_proc_id; } return -1; } However, the phys_proc_id was already set to 0 by remove_siblinginfo() when the CPU was offlined. So, topology_phys_to_logical_pkg() cannot find the correct logical_proc_id and always returns -1. As the result, uncore_pci_remove() calls WARN_ON_ONCE() and the warning messages are shown. What is worse is that the bogus 'pkg' index results in two bugs: - We dereference uncore_extra_pci_dev[] with a negative index - We fail to clean up a stale pointer in uncore_extra_pci_dev[][] To fix these bugs, remove the clearing of ->phys_proc_id from remove_siblinginfo(). This should not cause any problems, because ->phys_proc_id is not used after it is hot-removed and it is re-set while hot-adding. Signed-off-by:Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Acked-by:
-
Harish authored
With glibc 2.26 'struct ucontext' is removed to improve POSIX compliance, which breaks powerpc/alignment_handler selftest. Fix the test by using ucontext_t. Tested on ppc, works with older glibc versions as well. Fixes the following: alignment_handler.c: In function ‘sighandler’: alignment_handler.c:68:5: error: dereferencing pointer to incomplete type ‘struct ucontext’ ucp->uc_mcontext.gp_regs[PT_NIP] += 4; Signed-off-by:Harish <harish@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Guenter Roeck authored
If KEXEC_CORE is not enabled, powernv builds fail as follows. arch/powerpc/platforms/powernv/smp.c: In function 'pnv_smp_cpu_kill_self': arch/powerpc/platforms/powernv/smp.c:236:4: error: implicit declaration of function 'crash_ipi_callback' Add dummy function calls, similar to kdump_in_progress(), to solve the problem. Fixes: 4145f358 ("powernv/kdump: Fix cases where the kdump kernel can get HMI's") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Guenter Roeck authored
Commit e67e02a5 ("powerpc/pseries: Fix cpu hotplug crash with memoryless nodes") adds an unconditional call to find_and_online_cpu_nid(), which is only declared if CONFIG_PPC_SPLPAR is enabled. This results in the following build error if this is not the case. arch/powerpc/platforms/pseries/hotplug-cpu.o: In function `dlpar_online_cpu': arch/powerpc/platforms/pseries/hotplug-cpu.c:369: undefined reference to `.find_and_online_cpu_nid' Follow the guideline provided by similar functions and provide a dummy function if CONFIG_PPC_SPLPAR is not enabled. This also moves the external function declaration into an include file where it should be. Fixes: e67e02a5 ("powerpc/pseries: Fix cpu hotplug crash with memoryless nodes") Signed-off-by:
-
Aneesh Kumar K.V authored
On powerpc we allocate page table pages from slab caches of different sizes. Currently we have a constructor that zeroes out the objects when we allocate them for the first time. We expect the objects to be zeroed out when we free the the object back to slab cache. This happens in the unmap path. For hugetlb pages we call huge_pte_get_and_clear() to do that. With the current configuration of page table size, both PUD and PGD level tables are allocated from the same slab cache. At the PUD level, we use the second half of the table to store the slot information. But we never clear that when unmapping. When such a freed object is then allocated for a PGD page, the second half of the page table page will not be zeroed as expected. This results in a kernel crash. Fix it by always clearing PGD pages when they're allocated. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Change log wording and formatting, add whitespace] Signed-off-by:
-
Aneesh Kumar K.V authored
The hugetlb pte entries are at the PMD and PUD level, so we can't use PTRS_PER_PTE to find the second half of the page table. Use the right offset for PUD/PMD to get to the second half of the table. Fixes: bf9a95f9 ("powerpc: Free up four 64K PTE bits in 64K backed HPTE pages") Signed-off-by:
Ram Pai <linuxram@us.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
We use the second half of the page table to store slot information, so we must allocate it always if hugetlb is possible. Fixes: bf9a95f9 ("powerpc: Free up four 64K PTE bits in 64K backed HPTE pages") Signed-off-by:
-
Aneesh Kumar K.V authored
To support memory keys, we moved the hash pte slot information to the second half of the page table. This was ok with PTE entries at level 4 (PTE page) and level 3 (PMD). We already allocate larger page table pages at those levels to accomodate extra details. For level 4 we already have the extra space which was used to track 4k hash page table entry details and at level 3 the extra space was allocated to track the THP details. With hugetlbfs PTE, we used this extra space at the PMD level to store the slot details. But we also support hugetlbfs PTE at PUD level for 16GB pages and PUD level page didn't allocate extra space. This resulted in memory corruption. Fix this by allocating extra space at PUD level when HUGETLB is enabled. Fixes: bf9a95f9 ("powerpc: Free up four 64K PTE bits in 64K backed HPTE pages") Signed-off-by:
-
Alexey Kardashevskiy authored
Radix guests do normally invalidate process-scoped translations when a new pid is allocated but migrated guests do not invalidate these so migrated guests crash sometime, especially easy to reproduce with migration happening within first 10 seconds after the guest boot start on the same machine. This adds the "Invalidate process-scoped translations" flush to fix radix guests migration. Fixes: 2ee13be3 ("KVM: PPC: Book3S HV: Update kvmppc_set_arch_compat() for ISA v3.00") Cc: stable@vger.kernel.org # v4.10+ Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by:
Laurent Vivier <lvivier@redhat.com> Tested-by:
Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
cp_abort is only required for user windows, because kernel context must not be preempted between a copy/paste pair. Without this patch, the init task gets used_vas set when it runs the nx842_powernv_init initcall, which opens windows for kernel usage. used_vas is then never cleared anywhere, so it gets propagated into all other tasks. It's a property of the address space, so it should really be cleared when a new mm is created (or in dup_mmap if the mmaps are marked as VM_DONTCOPY). For now we seem to have no such driver, so leave that for another patch. Fixes: 6c8e6bb2 ("powerpc/vas: Add support for user receive window") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
-
Sam Bobroff authored
Currently if the kernel receives a memory hot-unplug event early enough, it may get stuck in an infinite loop in dissolve_free_huge_pages(). This appears as a stall just after: pseries-hotplug-mem: Attempting to hot-remove XX LMB(s) at YYYYYYYY It appears to be caused by "minimum_order" being uninitialized, due to init_ras_IRQ() executing before hugetlb_init(). To correct this, extract the part of init_ras_IRQ() that enables hotplug event processing and place it in the machine_late_initcall phase, which is guaranteed to be after hugetlb_init() is called. Signed-off-by:
Sam Bobroff <sam.bobroff@au1.ibm.com> Acked-by:
-
Jia Zhang authored
The vsyscall page should be visible only if vsyscall=emulate/native when dumping /proc/kcore. Signed-off-by:
Jia Zhang <zhang.jia@linux.alibaba.com> Reviewed-by:
Jiri Olsa <jolsa@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jolsa@redhat.com Link: http://lkml.kernel.org/r/1518446694-21124-3-git-send-email-zhang.jia@linux.alibaba.comSigned-off-by:
-
Jia Zhang authored
Commit: df04abfd ("fs/proc/kcore.c: Add bounce buffer for ktext data") ... introduced a bounce buffer to work around CONFIG_HARDENED_USERCOPY=y. However, accessing the vsyscall user page will cause an SMAP fault. Replace memcpy() with copy_from_user() to fix this bug works, but adding a common way to handle this sort of user page may be useful for future. Currently, only vsyscall page requires KCORE_USER. Signed-off-by:
-
Dominik Brodowski authored
On 64-bit builds, we should not rely on "int $0x80" working (it only does if CONFIG_IA32_EMULATION=y is enabled). Without this patch, the move test may succeed, but the "int $0x80" causes a segfault, resulting in a false negative output of this self-test. Signed-off-by:
-
Dominik Brodowski authored
Signed-off-by:
-
