This reverts commit 505c8321.

This is not an official topology from the SOF project. Topologies are
named based on the card configuration and are NOT board specific.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20231205220131.2585913-1-cujomalainey@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from srinivas.kandagatla@linaro.org:

Limit the speaker digital gains to 0dB so that the users will not damage them.
Currently there is a limit in UCM, but this does not stop the user form
changing the digital gains from command line. So limit this in driver
which makes the speakers more safer without active speaker protection in
place.

Apart from this there is also a range check fix in snd_soc_limit_volume
to allow setting this limit correctly.

Tested on Lenovo X13s.

Limit the speaker digital gains to 0dB so that the users will not damage them.
Currently there is a limit in UCM, but this does not stop the user form
changing the digital gains from command line. So limit this in driver
which makes the speakers more safer without active speaker protection in
place.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231204124736.132185-3-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Volume can have ranges that start with negative values, ex: -84dB to
+40dB. Apply correct range check in snd_soc_limit_volume before setting
the platform_max. Without this patch, for example setting a 0dB limit on
a volume range of -84dB to +40dB would fail.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231204124736.132185-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When wm_adsp_buffer_read() fails, we should free buf->regions.
Otherwise, the callers of wm_adsp_buffer_populate() will
directly free buf on failure, which makes buf->regions a leaked
memory.

Fixes: a792af69 ("ASoC: wm_adsp: Refactor compress stream initialisation")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231204074158.12026-1-dinghao.liu@zju.edu.cnSigned-off-by: Mark Brown <broonie@kernel.org>

Change the default MIC detection impedance threshold to 200ohm
to support low mic DC impedance headset.
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20231201042933.26392-1-David.Rau.opensource@dm.renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

This commit adds support for Huawei MateBook D16 2021
with Ryzen 4600H in driver acp3x-es83xx.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20231202223001.8025-1-posteuca@mutex.oneSigned-off-by: Mark Brown <broonie@kernel.org>

Move the base_cfg to struct sof_ipc4_gain_data. This struct
describes the message payload passed to the firmware via the mailbox.

It is not wise to be 'clever' and try to use the first part of a struct
as IPC message without marking the message section as packed and aligned.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231129131411.27516-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Separate the IPC message part as struct sof_ipc4_src_data. This struct
describes the message payload passed to the firmware via the mailbox.

It is not wise to be 'clever' and try to use the first part of a struct
as IPC message without marking the message section as packed and aligned.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231129131411.27516-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The current driver is registering the same dais for each hdev found in the
system which results duplicated widgets to be registered and the kernel
log contains similar prints:
snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten

To avoid such issue, split the dai array into HDMI and non HDMI array and
register them conditionally:
for HDMI hdev only register the dais needed for HDMI
for non HDMI hdev do not  register the HDMI dais.

Depends-on: 3d1dc8b1 ("ASoC: Intel: skl_hda_dsp_generic: Drop HDMI routes when HDMI is not available")
Link: https://github.com/thesofproject/linux/issues/4509Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231128123914.3986-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The -1 value for active_decimator[dai_id] is considered as "not set",
but at probe the table is initialized a 0, this prevents enabling the
DEC0 Mixer since it will be considered as already set.

Initialize the table entries as -1 to fix tx_macro_tx_mixer_put().

Fixes: 1c6a7f52 ("ASoC: codecs: tx-macro: fix active_decimator array")
Fixes: c1057a08 ("ASoC: codecs: tx-macro: fix kcontrol put")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231116-topic-sm8x50-upstream-tx-macro-fix-active-decimator-set-v1-1-6edf402f4b6f@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds ASUSTeK COMPUTER INC  "E1504FA" to the quirks file acp6x-mach.c
to enable microphone array on ASUS Vivobook GO 15.
I have this laptop and can confirm that the patch succeeds in enabling the
microphone array.
Signed-off-by: Malcolm Hart <malcolm@5harts.com>
Cc: stable@vger.kernel.org
Rule: add
Link: https://lore.kernel.org/stable/875y1nt1bx.fsf%405harts.com
Link: https://lore.kernel.org/r/871qcbszh0.fsf@5harts.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add pang13 quirk to enable the internal microphone.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Link: https://lore.kernel.org/r/20231127184237.32077-2-tcrawford@system76.comSigned-off-by: Mark Brown <broonie@kernel.org>

SND_SOC_IMX_RPMSG should depend on OF and I2C. It fixes the following
error reported by kernel test robot:

ld: sound/soc/fsl/imx-rpmsg.o: in function `imx_rpmsg_late_probe':
imx-rpmsg.c:(.text+0x4f): undefined reference to `i2c_find_device_by_fwnode'

Fixes: 5d9f746c ("ASoC: imx-rpmsg: Force codec power on in low power audio mode")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311230506.DPF9vvYY-lkp@intel.com/Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://lore.kernel.org/r/20231125065300.6385-1-chancel.liu@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.

In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

With IPC4, a pipeline may contain multiple modules in the data
processing domain and they can be scheduled to run on different cores.
Add a new field in struct snd_sof_pipeline to keep track of all the
cores that are associated with the modules in the pipeline. Set the
pipeline core mask for IPC3 when initializing the pipeline widget IPC
structure. For IPC4, set the core mark when initializing the pipeline
widget and initializing processing modules in the data processing domain.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The topology files for SDW devices require HDMI dai links to be present and
this is granted under normal conditions but in case of special use cases
the display (i915) driver might not be enabled due to deny-listing,
booting with nomodeset or just not compiled at all.

This should not block the non HDMI audio to be usable so register the dai
links unconditionally. The code has been prepared for this and in case of
no HDMI audio the link is created with dummy codec.

Closes: https://github.com/thesofproject/linux/issues/4594
Closes: https://github.com/thesofproject/linux/issues/4648Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124124032.15946-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When the HDMI is not present due to disabled display support
we will use dummy codec and the HDMI routes will refer to non existent
DAPM widgets.

Trim the route list from the HDMI routes to be able to probe the card even
if the HDMI dais are not registered.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124124015.15878-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

As the input phy clock frequency will divided by 2 by default
on i.MX8MP with the implementation of clk-imx8mp-audiomix driver,
So the requested frequency need to be updated.

The relation of phy clock is:
    sai_pll_ref_sel
       sai_pll
          sai_pll_bypass
             sai_pll_out
                sai_pll_out_div2
                   earc_phy_cg
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/1700702093-8008-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the machine compatible and topology filename for the Google Steelix
MT8186 Chromebook to load the correct SOF topology file.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231123084454.20471-1-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

A recent change to address pops and clicks with codecs like WSA883X
touched the same code paths as a fix for clearing DAI parameters and
resulted in a bad merge.

Specifically, commit f0220575 ("ASoC: soc-dai: add flag to mute and
unmute stream during trigger") made mute at stream close conditional,
while commit 3efcb471 ("ASoC: soc-pcm.c: Make sure DAI parameters
cleared if the DAI becomes inactive") moved that same mute call back to
soc_pcm_hw_clean().

Fix up the bad merge by dropping the second mute call from
soc_pcm_clean() and making sure that the call in soc_pcm_hw_clean() is
conditional as intended.

Fixes: bdb7e192 ("ASoC: Merge up workaround for CODECs that play noise on stopped stream")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231123091815.21933-1-johan+linaro@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds the jd_mutex to protect the jack detection control flow.
And only the headset type could check the button status.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The bit 10 in TX_DPTH_CTRL register controls the TX clock rate.
If this bit is set, TX datapath clock should be = 2* TX bit rate.
If this bit is not set, TX datapath clock should be 10* TX bit rate.

As the spdif only case, we always use 2 * TX bit clock, so
this bit need to be set.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1700617373-6472-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

On i.MX8MP, when the TERE and FSD_MSTR enabled before configuring
the word width, there will be no frame sync clock issue, because
old word width impact the generation of frame sync.

TERE enabled earlier only for i.MX8MP case for the hardware limitation,
So need to disable FSD_MSTR before configuring word width, then enable
FSD_MSTR bit for this specific case.

Fixes: 3e4a8261 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1700474735-3863-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge a couple of small fixes for the cs43130, one const correctness
issue and one problem with the configuration of left justified format.

Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231117141344.64320-3-mstrozek@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231117141344.64320-2-mstrozek@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

skl_platform_register() uses krealloc. When krealloc is fail,
then previous memory is not freed. The leak is also when soc
component registration failed.
Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231116224112.2209-2-kamil.duljas@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The function has multiple return points at which it is not released
previously allocated memory.
Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231116213926.2034-2-kamil.duljas@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

This issue is reproduced when W=1 build in compiler gcc-12.
The following are sparse warnings:

sound/soc/codecs/nau8822.c:199:25: sparse: sparse: incorrect type in assignment
sound/soc/codecs/nau8822.c:199:25: sparse: expected unsigned short
sound/soc/codecs/nau8822.c:199:25: sparse: got restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311122320.T1opZVkP-lkp@intel.com/Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20231117043011.1747594-1-CTLIN0@nuvoton.comSigned-off-by: Mark Brown <broonie@kernel.org>

The resources should be freed when function return error.
Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231116125150.1436-1-kamil.duljas@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Bit 6 of INPPGA (INPPGAMUTE) does not control the Aux path, it controls
the input PGA path, as can been seen from Figure 8 Input Boost Stage in
the datasheet. Update the naming of things in the driver to match this
and update the routing to also reflect this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231113155916.1741027-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

HP 255 G10's internal microphone array can be made
to work by adding it to the quirk table.
Signed-off-by: Matus Malych <matus@malych.org>
Link: https://lore.kernel.org/r/20231112165403.3221-1-matus@malych.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))

Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:

 - Include the upper 5 address bits when inserting TLB entries on a
   64-bit kernel.

   On physical machines those are ignored, but in qemu it's nice to have
   them included and to be correct.

 - Stop the 64-bit kernel and show a warning if someone tries to boot on
   a machine with a 32-bit CPU

 - Fix a "no previous prototype" warning in parport-gsc

* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Prevent booting 64-bit kernels on PA1.x machines
  parport: gsc: mark init function static
  parisc/pgtable: Do not drop upper 5 address bits of physical address

Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - support PREEMPT_DYNAMIC with static keys

 - relax memory ordering for atomic operations

 - support BPF CPU v4 instructions for LoongArch

 - some build and runtime warning fixes

* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  selftests/bpf: Enable cpu v4 tests for LoongArch
  LoongArch: BPF: Support signed mod instructions
  LoongArch: BPF: Support signed div instructions
  LoongArch: BPF: Support 32-bit offset jmp instructions
  LoongArch: BPF: Support unconditional bswap instructions
  LoongArch: BPF: Support sign-extension mov instructions
  LoongArch: BPF: Support sign-extension load instructions
  LoongArch: Add more instruction opcodes and emit_* helpers
  LoongArch/smp: Call rcutree_report_cpu_starting() earlier
  LoongArch: Relax memory ordering for atomic operations
  LoongArch: Mark __percpu functions as always inline
  LoongArch: Disable module from accessing external data directly
  LoongArch: Support PREEMPT_DYNAMIC with static keys

Pull powerpc fixes from Michael Ellerman:

 - Finish a refactor of pgprot_framebuffer() which dependend
   on some changes that were merged via the drm tree

 - Fix some kernel-doc warnings to quieten the bots

Thanks to Nathan Lynch and Thomas Zimmermann.

* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
  powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
  powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
  powerpc: Remove file parameter from phys_mem_access_prot()
  powerpc/machdep: Remove trailing whitespaces

Pull smb client fixes from Steve French:

 - ctime caching fix (for setxattr)

 - encryption fix

 - DNS resolver mount fix

 - debugging improvements

 - multichannel fixes including cases where server stops or starts
   supporting multichannel after mount

 - reconnect fix

 - minor cleanups

* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: handle when server stops supporting multichannel
  cifs: handle when server starts supporting multichannel
  Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
  smb3: allow dumping session and tcon id to improve stats analysis and debugging
  smb: client: fix mount when dns_resolver key is not available
  smb3: fix caching of ctime on setxattr
  smb3: minor cleanup of session handling code
  cifs: reconnect work should have reference on server struct
  cifs: do not pass cifs_sb when trying to add channels
  cifs: account for primary channel in the interface list
  cifs: distribute channels across interfaces based on speed
  cifs: handle cases where a channel is closed
  smb3: more minor cleanups for session handling routines
  smb3: minor RDMA cleanup
  cifs: Fix encryption of cleared, but unset rq_iter data buffers