- 19 Jan, 2006 40 commits
-
-
J. Bruce Fields authored
We should be opening this directory RDONLY, not RDWR. Thanks to Christoph Hellwig for the bug report. Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
J. Bruce Fields authored
Allow mechanisms to return more varied errors on the context creation downcall. Signed-off-by:
-
Kevin Coffman authored
We require the server's gssd to create a completed context before asking the kernel to send a final context init reply. However, gssd could be buggy, or under some bizarre circumstances we might purge the context from our cache before we get the chance to use it here. Handle this case by returning GSS_S_NO_CONTEXT to the client. Also move the relevant code here to a separate function rather than nesting excessively. Signed-off-by:
-
Andy Adamson authored
Kerberos context initiation is handled in a single round trip, but other mechanisms (including spkm3) may require more, so we need to handle the GSS_S_CONTINUE case in svcauth_gss_accept. Send a null verifier. Signed-off-by:
Andy Adamson <andros@citi.umich.edu> Signed-off-by:
-
J. Bruce Fields authored
Simple, useful debugging printk: print the number of each op as we process it. Signed-off-by:
-
J. Bruce Fields authored
Fix some bad logic. Signed-off-by:
-
J. Bruce Fields authored
It's confusing having both release_stateowner() and release_state_owner(). And as it turns out, release_state_owner() is short and only called from one place; so just remove it. Also note the confirmed check is superfluous there--preprocess_seqid_op already check this. And remove a redundant comment and a superfluous line assignment while we're at it. Signed-off-by:
-
J. Bruce Fields authored
One of the things that's confusing about nfsd4_lock is that the lk_stateowner field could be set to either of two different lockowners: the open owner or the lock owner. Rename to lk_replay_owner and add a comment to make it clear that it's used for whichever stateowner has its sequence id bumped for replay detection. Signed-off-by:
-
J. Bruce Fields authored
release_state_owner also puts the lock owner on the close_lru. There's no need for that, though; replays of the failed lock would be handled by the openowner not the lockowner. Also consolidate the cleanup a bit, fixing leaks that can happen if errors occur between the time a new lock owner is allocated and the lock is done. Remove a comment and dprintk that look a little redundant. Signed-off-by:
-
Andy Adamson authored
Logic fixes for LOCK and UNLOCK. - Move the permission check on the current file handle outside of nfs4_lock_state() - remove the file manager fl_release_private calls; fl_ops is not set. Signed-off-by:
-
J. Bruce Fields authored
The server code currently keeps track of the destination address on every request so that it can reply using the same address. However we forget to do that in the case of a deferred request. Remedy this oversight. >From folks at PolyServe. Signed-off-by:
-
NeilBrown authored
These are both called from two places close together. I could rearrange that code so there is only one call site, but just removing the 'inline' is probably best. Signed-off-by:
-
YAMAMOTO Takashi authored
Change nfsd_sync_dir to return an error if ->sync fails, and pass that error up through the stack. This involves a number of rearrangements of error paths, and care to distinguish between Linux -errno numbers and NFSERR numbers. In the 'create' routines, we continue with the 'setattr' even if a previous sync_dir failed. This patch is quite different from Takashi's in a few ways, but there is still a strong lineage. Signed-off-by:
-
Roman Zippel authored
Set the correct type and creator for symlinks. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Roman Zippel authored
HFS+ also requires the correct creation date so recent version of OS X recognize it as link. Improve link handling: - if something is wrong with the link, ignore the link attribute and treat it as regular file (this also fixes a missing unlock during lookup). - check for incorrect link counts during unlink. Signed-off-by:
-
Roman Zippel authored
Read the correct ctime from disk (it was written but never read for some reason). Read also creation date, which is used in the next patch. (Problem found by Olivier Castan <olivier.castan@certa.ssi.gouv.fr>) Signed-off-by:
-
David Elliott authored
Add support for HFSX, which allows for case-sensitive filenames. Signed-off-by:
-
Roman Zippel authored
Add the log level and a "hfs: " prefix to all kernel prints. Signed-off-by:
-
Roman Zippel authored
Add the log level and a "hfs: " prefix to all kernel prints. (HFS and HFS+ will use the same prefix, as they share some code and could be merged at some point.) Signed-off-by:
-
Arnd Bergmann authored
All standard system calls should be declared in include/linux/syscalls.h. Add some of the new additions that were previously missed. Signed-off-by:
Arnd Bergmann <arndb@de.ibm.com> Signed-off-by:
-
Jason Baron authored
Currently, a negative policy argument passed into the 'sys_sched_setscheduler()' system call, will return with success. However, the manpage for 'sys_sched_setscheduler' says: EINVAL The scheduling policy is not one of the recognized policies, or the parameter p does not make sense for the policy. Signed-off-by:Jason Baron <jbaron@redhat.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Eric Van Hensbergen authored
v9fs mmap support was originally removed from v9fs at Al Viro's request, but recently there have been requests from folks who want readpage functionality (primarily to enable execution of files mounted via 9P). This patch adds readpage support (but not writepage which contained most of the objectionable code). It passes fsx-linux (and other regressions) so it should be relatively safe. Signed-off-by:
Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Correct a bit of whitespace problems while working here. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
When the user specifies both a COW file and its backing file, if the previous backing file is not found, currently UML tries again to use it and fails. This can be corrected by changing same_backing_files() return value in that case, so that the caller will try to change the COW file to point to the new location, as already done in other cases. Additionally, given the change in the meaning of the func, change its name, invert its return value, so all values are inverted except when stat(from_cow,&buf2) fails. And add some comments and two minor bugfixes - remove a fd leak (return err rather than goto out) and a repeated check. Tested well. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
*) mark as "EXPERIMENTAL" various items that either aren't very stable or that are actively crashing the setup of users which don't really need them (i.e. HIGHMEM and 3-level pagetables on x86 - nobody needs either, everybody reports "I'm using it and getting trouble"). *) move net/Kconfig near to the rest of network configurations, and drivers/block/Kconfig near "Block layer" submenu. *) it's useless and doesn't work well to force NETDEVICES on and to disable the prompt like it's done. Better remove the attempt, and change that to a simple "default y if UML". *) drop the warning about "report problems about HPPFS" - it's redundant anyway, as that's the usual procedure, and HPPFS users are especially technical (i.e. they know reporting bugs is _good_). Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Ugly trick to help make malloc not sleeping - we can't do anything else. But this is not yet optimal, since spinlock don't trigger in_atomic() when preemption is disabled. Also, even if ugly, this was already used in one place, and was even more bogus. Fix it. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
In a previous patch I shifted an allocation to being atomic. In this patch, a better but more intrusive solution is implemented, i.e. hold the lock only when really needing it, especially not over pipe operations, nor over the culprit allocation. Additionally, while at it, add a missing kfree in the failure path, and make sure that if we fail in forking, write_sigio_pid is -1 and not, say, -ENOMEM. And fix whitespace, at least for things I was touching anyway. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
In this error path, when the interface has had a problem, we call dev_close(), which is disallowed for two reasons: *) takes again the UML internal spinlock, inside the ->stop method of this device *) can be called in process context only, while we're in interrupt context. I've also thought that calling dev_close() may be a wrong policy to follow, but it's not up to me to decide that. However, we may end up with multiple dev_close() queued on the same device. But the initial test for (dev->flags & IFF_UP) makes this harmless, though - and dev_close() is supposed to care about races with itself. So there's no harm in delaying the shutdown, IMHO. Something to mark the interface as "going to shutdown" would be appreciated, but dev_deactivate has the same problems as dev_close(), so we can't use it either. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Pre-clear transport-specific private structure before passing it down. In fact, I just got a slab corruption and kernel panic on exit because kfree() was called on a pointer which probably was never allocated, BUT hadn't been set to NULL by the driver. As the code is full of such errors, I've decided for now to go the safe way (we're talking about drivers), and to do the simple thing. I'm also starting to fix drivers, and already sent a patch for the daemon transport. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Avoid uninitialized data in the daemon_data structure. I used this transport before doing proper setup before-hand, and I got some very nice SLAB corruption due to freeing crap pointers. So just make sure to clear everything when appropriate. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
I added this line to share this file with UML, but now it's no longer shared so remove this useless leftover. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Bodo Stroesser authored
Some fixes to make softints work in tt mode. Signed-off-by:
-
Jeff Dike authored
Now that we are doing soft interrupts, there's no point in using sigsetjmp and siglongjmp. Using setjmp and longjmp saves a sigprocmask on every jump. Signed-off-by:
-
Jeff Dike authored
This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: -
Jeff Dike authored
Stop using global variables to hold the file descriptor and offset used to map the skas0 stubs. Instead, calculate them using the page physical addresses. Signed-off-by:
-
Gennady Sharapov authored
The serial UML OS-abstraction layer patch (um/kernel/skas dir). This moves all systemcalls from skas/process.c file under os-Linux dir and join skas/process.c and skas/process_kern.c files. Signed-off-by:
Gennady Sharapov <gennady.v.sharapov@intel.com> Signed-off-by:
-
Gennady Sharapov authored
The serial UML OS-abstraction layer patch (um/kernel/skas dir). This moves all systemcalls from skas/mem_user.c file under os-Linux dir and join skas/mem_user.c and skas/mem.c files. Signed-off-by:
-
Gennady Sharapov authored
The serial UML OS-abstraction layer patch (um/kernel dir). This moves skas headers to arch/um/include. Signed-off-by:
-
Bodo Stroesser authored
Current implementation of boot_timer_handler isn't usable for s390. So I changed its name to do_boot_timer_handler, taking (struct sigcontext *)sc as argument. do_boot_timer_handler is called from new boot_timer_handler() in arch/um/os-Linux/signal.c, which uses the same mechanisms as other signal handler to find out sigcontext pointer. Signed-off-by:
Bodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by:
-
Gennady Sharapov authored
The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from time.c file under os-Linux dir and joins time.c and tine_kernel.c files Signed-off-by:
-
