If PCI boards are supported, use the module_comedi_pci_driver() macro to
register the module as a comedi driver and a PCI driver.  Otherwise,
only ISA boards are supported so use the module_comedi_driver() macro to
register the module as a comedi driver.

Renamed 'driver_amplc_dio200' to 'amplc_dio200_driver' and removed
'driver_' prefix from PCI related functions and variables, purely for
aesthetic reasons.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change conditional compilation on kernel options to use the IS_ENABLED()
macro.  Remove most of the #ifdef lines and add extra if
(IS_ENABLED(xxx)) tests so the compiler can remove unreachable code.
The pci_driver stuff and device table and some of the static const data
is still conditionally compiled.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Implement the attach_pci() hook as function pc263_attach_pci().  This is
called bu comedi_pci_auto_config() in preference to the old attach()
hook (implemented by pc263_attach()) and avoids searching for the probed
PCI device.

Factor out code common to pc263_find_pci() and pc263_attach_pci() into
new function pc263_find_pci_board().  Factor out most code common to
pc263_attach() and pc263_attach_pci() into new functions
pc263_pci_common_attach() and pc263_common_attach().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'thisboard' and 'devpriv' macros rely on a local variable having a
specific name and yield pointers derived from that local variable.
Replace the macros with local variables wherever they occur.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pc263_find_pci() finds a supported PCI device, returning 0 on success
or -EIO on failure and returning the pointer to the PCI device via a
struct pci_dev ** parameter.  Change it to return the struct pci_dev *
on success or NULL on failure.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove fancy_name member from struct pc263_board.  It is initialized in
pc263_boards[] but not used anywhere else.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the printk calls with dev_info, dev_err, etc.  There were some
consecutive printk calls without newlines which now snprintf into a
temporary buffer and this bit of code has been factored out into new
function pc263_report_attach().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Moved some functions and variables to avoid forward declarations.  Moved
PCI table closer to the struct pci_driver that refers to it.

Also removed some useless comments from pc263_attach().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If PCI boards are supported, use the module_comedi_pci_driver() macro to
register the module as a comedi driver and a PCI driver.  Otherwise,
only ISA boards are supported so use the module_comedi_driver() macro to
register the module as a comedi driver.

Renamed 'driver_amplc_pc263' to 'amplc_pc263_driver' and removed
'driver_' prefix from PCI related functions and variables, purely for
aesthetic reasons.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change conditional compilation on kernel options to use the IS_ENABLED()
macro.  Remove most of the #ifdef lines and add extra if
(IS_ENABLED(xxx)) tests so the compiler can remove unreachable code.
The pci_driver stuff and device table is still conditionally compiled.

In pc263_attach() move the call to alloc_private() as it is only used
for PCI devices.  (In pc263_detach(), for ISA devices a non-zero
dev->iobase means the I/O region needs releasing.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a missing case label in the switch statement that prints out
details of the attached device in pc263_attach().  Fix it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a relay output card with no inputs.  It's single subdevice is
currently a digital input/output subdevice (COMEDI_SUBD_DIO).  It should
really be a digital output subdevice (COMEDI_SUBD_DO).  Change the
subdevice type and remove the insn_config() hook as it doesn't do
anything useful.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The initial state of the relays is being read incorrectly.  It's reading
a single 8-bit port twice, but should be reading two consecutive 8-bit
ports.  Fix it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove most of the #if IS_ENABLED(xxx) lines, but add extra if
(IS_ENABLED(xxx)) tests so the compiler can remove unreachable code.
The pci_driver stuff and device table is still conditionally compiled.

Also made pc236_find_pci() static as it was accidentally made non-static
by an earlier patch, so the compiler wouldn't remove it when it was
unreachable.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Implement the attach_pci() hook as function pc236_attach_pci().  This is
called bu comedi_pci_auto_config() in preference to the old attach()
hook (implemented by pc236_attach()) and avoids searching for the probed
PCI device.

Factor out code common to pc236_find_pci() and pc236_attach_pci() into
new function pc236_find_pci_board().  Factor out most code common to
pc236_attach() and pc236_attach_pci() into new functions
pc236_pci_common_attach() and pc236_common_attach().

Also #if out member 'devid' from struct pc236_board unless PCI boards
are supported as it is not used for ISA boards.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'thisboard' and 'devpriv' macros rely on a local variable having a
specific name and yield pointers derived from that local variable.
Replace the macros with local variables wherever they occur.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pc236_find_pci() finds a supported PCI device, returning 0 on success
or -EIO on failure and returning the pointer to the PCI device via a
struct pci_dev ** parameter.  Change it to return the struct pci_dev *
on success or NULL on failure.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove fancy_name member from struct pc236_board.  It is initialized in
pc235_boards[] but not used anywhere else.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the printk calls with dev_info, dev_err, etc.  There were some
consecutive printk calls without newlines which now scnprintf into a
temporary buffer and this bit of code has been factored out into new
function pc236_report_attach().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Moved some functions and variables to avoid forward declarations.  Moved
PCI table closer to the struct pci_driver that refers to it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If PCI boards are supported, use the module_comedi_pci_driver() macro to
register the module as a comedi driver and a PCI driver.  Otherwise,
only ISA boards are supported so use the module_comedi_driver() macro to
register the module as a comedi driver.

Renamed 'driver_amplc_pc236' to 'amplc_pc236_driver' and removed
'driver_' prefix from PCI related functions and variables, purely for
aesthetic reasons.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change conditional compilation on kernel config options to use the
IS_ENABLED() macro.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the inline functions uvirt_to_kva and kvirt_to_kva, they
are not referenced by any of the drivers.c code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The COMEDI_FC Kconfig option is selected by the relevant drivers
when needed. Since it only contains shared functions, selecting
it manually serves no purpose. Just make it a hidden selection.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a few coding style errors in cb_pcidas64.
Signed-off-by: Dimitrios Semitsoglou-Tsiapos <dimitrios.semitsoglou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typo in comments within staging/comedi.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Implement the attach_pci() hook.  This is called by
comedi_pci_auto_config() in preference to the old attach() hook and
avoids searching for the probed PCI device.  Factor out some common code
used by both the attach() and attach_pci() hooks into a couple of new
functions, das08_pci_attach_common() and das08_find_pci_board().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the existing board entry named "das08" for the PCI-DAS08 board to
"pci-das08".  Add a new wildcard board entry called "das08" that will
match any supported PCI board.  If 'dev->board_ptr' points to the
wildcard board entry in the ->attach() routine, it will be replaced with
a supported PCI board entry if there are any (taking into account the
bus and slot specified by the device config options passed in to the
function).

Split the code that finds a matching PCI device into a new function
das08_find_pci().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'thisboard' and 'devpriv' macros rely on a local variable having a
specific name and yield pointers derived from that local variable.
Replace the macros with local variables wherever they occur.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the printk calls with dev_info, dev_err, etc.  Some of the
printk strings were missing newlines on the end.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Moved some functions to avoid forward declarations.  Moved a few other
bits at the same time to keep EXPORT_SYMBOL{,_GPL}() close to the symbol
being exported, and PCI table close to the code that refers to it.

Changed whitespace in das08_board[] and das08_cs_board[] initializers.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If PCI boards are supported, use the module_comedi_pci_driver() macro to
register the module as a comedi driver and a PCI driver.  Otherwise, if
ISA (or PC/104) boards are supported, use the module_comedi_driver()
macro to register the module as a comedi driver.  Otherwise, this is
only a helper module for an external comedi driver (das08_cs).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't deal with allocation and deallocation of I/O resources and PCI
enabling/disabling in the exported functions das08_common_attach() and
das08_common_detach().  Do it in das08_attach() and new function
das08_detach() (which is now the comedi detach() hook for this driver).

This keeps things more symmetrical.  Callers of das08_common_attach()
and das08_common_detach() are now responsible for allocation of their
own I/O resources and enabling of their own devices.  The only external
caller of das08_common_attach() and das08_common_detach() is the
das08_cs module, which looks after its own I/O resources.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change conditional compilation on kernel config options to use the
IS_ENABLED() macro.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Complete the refactor of the das1800 driver to remove all the
forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Complete the refactor of the rtd520 driver to remove all the
forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Factor out the code that finds a matching PCI device from attach
function. This allows reducing the indent level of the remaining
code in the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Factor out the code that finds a matching PCI device from attach
function. This allows reducing the indent level of the remaining
code in the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Factor out the code that finds a matching PCI device from attach
function. This allows reducing the indent level of the remaining
code in the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Factor out the code that finds a matching PCI device from attach
function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>