- 21 Sep, 2021 2 commits
-
-
Randy Dunlap authored
When DELL_WMI=y, DELL_WMI_PRIVACY=y, and LEDS_TRIGGER_AUDIO=m, there is a linker error since the LEDS trigger code is built as a loadable module. This happens because DELL_WMI_PRIVACY is a bool that depends on a tristate (LEDS_TRIGGER_AUDIO=m), which can be dangerous. ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe': dell-wmi-privacy.c:(.text+0x3df): undefined reference to `ledtrig_audio_get' Fixes: 8af9fa37 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Perry Yuan <Perry.Yuan@dell.com> Cc: Dell.Client.Kernel@dell.com Cc: platform-driver-x86@vger.kernel.org Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <mgross@linux.intel.com> Link: https://lore.kernel.org/r/20210918044829.19222-1-rdunlap@infradead.orgReviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The MODULE_DEVICE_TABLE already creates proper alias for ACPI driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210916170054.136790-1-krzysztof.kozlowski@canonical.comReviewed-by:
-
- 16 Sep, 2021 3 commits
-
-
Sanket Goswami authored
IdleMask is the metric used by the PM firmware to know the status of each of the Hardware IP blocks monitored by the PM firmware. Knowing this value is key to get the information of s2idle suspend/resume status. This value is mapped to PMC scratch registers, retrieve them accordingly based on the CPU family and the underlying firmware support. Co-developed-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by:
Sanket Goswami <Sanket.Goswami@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20210916124002.2529-1-Sanket.Goswami@amd.comReviewed-by:
-
Sanket Goswami authored
As the PM firmware returns the status of the last s0i3 in the smu_metrics structure, the existing name "s0i3_cyclecount" seems to be a misnomer. Change it accordingly to "s0i3_last_entry_status". Signed-off-by:
-
K Naduvalath, Sumesh authored
This driver is for accessing the PSE (Programmable Service Engine) - an Embedded Controller like IP - using ISHTP (Integratd Sensor Hub Transport Protocol) to get battery, thermal and UCSI (USB Type-C Connector System Software Interface) related data from the platform. Signed-off-by:
K Naduvalath, Sumesh <sumesh.k.naduvalath@intel.com> Reviewed-by:
Mark Gross <mgross@linux.intel.com> Link: https://lore.kernel.org/r/20210913051056.28736-1-sumesh.k.naduvalath@intel.comReviewed-by:
-
- 14 Sep, 2021 32 commits
-
-
Jules Irenge authored
checkpatch.pl tool warns about using __attribute__((packed)) "WARNING: __packed is preferred over __attribute__((packed))" To fix this __attribute__((packed)) is replaced by __packed Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Link: https://lore.kernel.org/r/20210912011741.30495-1-jbi.octave@gmail.comReviewed-by:
-
Barnabás Pőcze authored
Make `find_guid()` return an acpi_status, and make it handle NULL pointer GUID strings; and adapt users accordingly. Signed-off-by:
Barnabás Pőcze <pobrn@protonmail.com> Link: https://lore.kernel.org/r/20210904175450.156801-31-pobrn@protonmail.comReviewed-by:
-
Barnabás Pőcze authored
Previously, `acpi_wmi_notify_handler()` and `wmi_get_event_data()` shared more or less the exact same code to query the data for a particular event. Introduce a function to get rid of the duplication, and use it from `acpi_wmi_notify_handler()` and `wmi_get_event_data()`. Signed-off-by:
-
Barnabás Pőcze authored
Introduce helper function to determine the appropriate ACPI type for the input parameter. This also fixes the following checkpatch warning: "braces {} are not necessary for any arm of this statement". Signed-off-by: -
Barnabás Pőcze authored
Instead of "manually" constructing the ACPI method name and hard-coding sizes in WMI functions, introduce a helper method which generates the method name for an arbitrary WMI block. Furthermore, save the appropriate buffer size into a macro. Signed-off-by:
-
Barnabás Pőcze authored
Introduce a helper function which wraps the appropriate `container_of()` macro invocation to convert a `struct device_driver` to `struct wmi_driver`. Signed-off-by:
-
Barnabás Pőcze authored
The current code carries out the following ACPI status mapping: AE_NOT_FOUND -> AE_OK AE_OK -> AE_OK AE_$X -> AE_$X That is, everything is mapped to itself, except AE_NOT_FOUND. The current code does not do it in the most straighforward way. Simplify the logic. Signed-off-by:
-
Barnabás Pőcze authored
Previously, `__query_block()` would fail if the second WCxx method call failed. However, the WQxx method might have succeeded, and potentially allocated memory for the result. Instead of throwing away the result and potentially leaking memory, ignore the result of the second WCxx call. Signed-off-by:
-
Barnabás Pőcze authored
Print the event identifier number in addition to the already printed information, and use %u for printing unsigned values in `wmi_notify_debug()`. Signed-off-by:
-
Barnabás Pőcze authored
Align the arguments of * wmi_evaluate_method() * wmi_install_notify_handler() * wmidev_evaluate_method() * find_guid_context() * acpi_wmi_ec_space_handler() * wmi_char_read() Signed-off-by:
-
Barnabás Pőcze authored
Move some variables in order to keep them in the narrowest possible scope. Signed-off-by:
-
Barnabás Pőcze authored
The `block` variable is assigned and only used once, the code shorter and probably clearer without it; so remove it. Signed-off-by:
-
Barnabás Pőcze authored
As per the coding style guide, the preferred way to pass the size of objects to allocator functions is `sizeof(*p)`. Use that. Signed-off-by:
-
Barnabás Pőcze authored
Other parts of the code use the `!p` idiom to check for NULL pointers, convert `find_guid_context()` to do the same. Signed-off-by:
-
Barnabás Pőcze authored
Instead of `sprintf()` use the new `sysfs_emit()` function. Signed-off-by:
-
Barnabás Pőcze authored
The `guid_block` struct is overlaid onto a buffer coming from the _WDG ACPI object of the device. For this reason mark the struct packed and add assertions about sizes. Signed-off-by:
-
Barnabás Pőcze authored
Instead of hard-coding a 16 long byte array, use the available `guid_t` type and related methods. Signed-off-by:
-
Barnabás Pőcze authored
The `bool` type is more expressive for a yes/no kind of value, so use that as the type of the `enable` parameter of `wmi_method_enable()`. Signed-off-by:
-
Barnabás Pőcze authored
Instead of manually creating the bit masks, use the `BIT()` macro to do it. Signed-off-by:
-
Barnabás Pőcze authored
The `find_guid_context()` is only called from one place, and `wblock` and `wdriver` cannot be NULL there. So remove the currently redundant checks. Signed-off-by:
-
Barnabás Pőcze authored
Remove an empty line after the last statement in `acpi_wmi_notify_handler()` which serves no purpose. Signed-off-by:
-
Barnabás Pőcze authored
Void pointers are implictly cast to arbitrary pointer types, so remove superfluous casts. Signed-off-by:
-
Barnabás Pőcze authored
The GUID block is available for `wmi_create_device()` through `wblock->gblock`. Use that consistently in the function instead of using a mix of `gblock` and `wblock->gblock`. Signed-off-by:
-
Barnabás Pőcze authored
The `status` variable was assigned at the end, and then immediately returned. Remove it altogether, and return the previously assigned value directly. Signed-off-by:
-
Barnabás Pőcze authored
Some pointers are initialized when they are defined, but they are almost immediately reassigned in the following lines. Remove these superfluous assignments. Signed-off-by:
-
Barnabás Pőcze authored
The empty initializer `{ }` is enough to properly initialize the terminating acpi_device_id entry in the device table, so use that. Signed-off-by: -
Barnabás Pőcze authored
Remove commas that are after terminating entries in arrays. Signed-off-by:
-
Barnabás Pőcze authored
Fix the following two checkpatch warnings: * "space required before the open parenthesis '('" * "that open brace { should be on the previous line" Signed-off-by: -
Barnabás Pőcze authored
The kernel doc erroneously specified `wmi_uninstall_notify_handler()` for the `wmi_remove_notify_handler()` function. Fix that. Signed-off-by:
-
Daniel Dadap authored
A number of upcoming notebook computer designs drive the internal display panel's backlight PWM through the Embedded Controller (EC). This EC-based backlight control can be plumbed through to an ACPI "WMAA" method interface, which in turn can be wrapped by WMI with the GUID handle 603E9613-EF25-4338-A3D0-C46177516DB7. Add a new driver, aliased to the WMAA WMI GUID, to expose a sysfs backlight class driver to control backlight levels on systems with EC-driven backlights. Signed-off-by:
Daniel Dadap <ddadap@nvidia.com> Reviewed-by:
Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20210903003838.15797-1-ddadap@nvidia.comReviewed-by:
-
Enver Balalic authored
This patch adds support for HP Omen laptops. It adds support for most things that can be controlled via the Windows Omen Command Center application. - Fan speed monitoring through hwmon - Platform Profile support (cool, balanced, performance) - Max fan speed function toggle Also exposes the existing HDD temperature through hwmon since this driver didn't use hwmon before this patch. This patch has been tested on a 2020 HP Omen 15 (AMD) 15-en0023dx. - V1 Initial Patch - V2 Use standard hwmon ABI attributes Add existing non-standard "hddtemp" to hwmon - V3 Fix overflow issue in "hp_wmi_get_fan_speed" Map max fan speed value back to hwmon values on read Code style fixes Fix issue with returning values from "hp_wmi_hwmon_read", the value to return should be written to val and not just returned from the function - V4 Use DMI Board names to detect if a device should use the omen specific thermal profile method. Select HWMON instead of depending on it. Code style fixes. Replace some error codes with more specific/meaningful ones. Remove the HDD temperature from HWMON since we don't know what unit it's expressed in. Handle error from hp_wmi_hwmon_init - V5 Handle possible NULL from dmi_get_system_info() Use match_string function instead of manually checking Directly use is_omen_thermal_profile() without the static variable. Signed-off-by:
Enver Balalic <balalic.enver@gmail.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210902182234.vtwl72n5rjql22qa@omen.localdomainReviewed-by:
-
Mario Limonciello authored
There have been reports of approximately a 0.9%-1.7% failure rate in SMU communication timeouts with s0i3 entry on some OEM designs. Currently the design in amd-pmc is to try every 100us for up to 20ms. However the GPU driver which also communicates with the SMU using a mailbox register which the driver polls every 1us for up to 2000ms. In the GPU driver this was increased by commit 05516264 ("drm/amd/pm: increase time out value when sending msg to SMU") Increase the maximum timeout used by amd-pmc to 2000ms to match this behavior. This has been shown to improve the stability for machines that randomly have failures. Cc: stable@kernel.org Reported-by:
Julian Sikorski <belegdol@gmail.com> BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1629Signed-off-by:
-
- 13 Sep, 2021 3 commits
-
-
Hans de Goede authored
Add info for getting the firmware directly from the UEFI for the Chuwi Hi10 Plus (CWI527), so that the user does not need to manually install the firmware in /lib/firmware/silead. This change will make the touchscreen on these devices work OOTB, without requiring any manual setup. Also tweak the min and width/height values a bit for more accurate position reporting. Signed-off-by:
-
Hans de Goede authored
Add touchscreen info for the Chuwi HiBook (CWI514) tablet. This includes info for getting the firmware directly from the UEFI, so that the user does not need to manually install the firmware in /lib/firmware/silead. This change will make the touchscreen on these devices work OOTB, without requiring any manual setup. Signed-off-by:
-
Matan Ziv-Av authored
The laptop model is identified by parsing the product name. If no product name is available, do not try to parse it. Default model is 2017. Signed-off-by:
Matan Ziv-Av <matan@svgalib.org> Link: https://lore.kernel.org/r/93ff3bb-503b-f73-bf18-87bae1699ed@svgalib.orgReviewed-by:
-
