- 16 Feb, 2023 6 commits
-
-
Ayush Gupta authored
This reverts a part of the commit 826e7ffa ("drm/amd/display: [FW Promotion] Release 0.0.153.0") Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Ayush Gupta<ayugupta@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Mustapha Ghaddar authored
[WHY & HOW] - make link_dp_dpia_bw.c available for linux. - add the verify link peak bw - clean up code and comment format. Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Mustapha Ghaddar <mghaddar@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] The DMCUB implementation required to workaround corruption is not currently stable and may cause intermittent corruption or hangs. [How] Disable PG until the sequence is stable. Reviewed-by:
Hansen Dsouza <hansen.dsouza@amd.com> Acked-by:
-
Melissa Wen authored
This function has many conditions and all code style issues (identation, missing braces, etc.) make reading it really annoying. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
Melissa Wen authored
Reviewed-by:
-
Jack Xiao authored
Freeing memory was warned during suspend. Move the self test out of suspend. Link: https://bugzilla.redhat.com/show_bug.cgi?id=2151825 Cc: jfalempe@redhat.com Signed-off-by:
Jack Xiao <Jack.Xiao@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Reviewed-and-tested-by:
Evan Quan <evan.quan@amd.com> Tested-by:
Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by:
-
- 14 Feb, 2023 26 commits
-
-
Bhawanpreet Lakha authored
[Why] We only allowed 1 overlay plane. But now some ASICS can support multiple overlay planes. [How] Use max_slave_planes as the number of overlays we can support. Also since we cannot draw cursor over a video plane, we need to make sure that we reject commits where the topmost plane is a video plane (overlay only). Reviewed-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Tested-by:
-
Wenjing Liu authored
[why] Link is a subcomponent in dc. DM should be aware of dc link structure as one of the abstracted objects maintained by dc. However it should have no idea of the existence of a link component in dc dedicated to maintain the states of dc link structure. As such we are moving link interfaces out of dc_link.h and directly added to dc.h. We are grandually fading out the explicit inclusion of dc_link header and eventually delete it. On dc side, since link is a subcomponent behind dc interfaces, it is not a good idea to implement dc interfaces in each individual subcomponent of link which is already a subcomponent of dc. So we are decoupling it by implementing a dc_link_exports in dc. This file will be a thin translation layer that breaks the dependency so link is able to make interface changes without breaking DM. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] Request from HW team to update the latencies to the new measured values. [How] Update the values in the bounding box. Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
-
Leo (Hanghong) Ma authored
[Why] The FreeSync active bit unconditionally set in HDMI VSIF. [How] Set this bit to true when FAMS is enable on desktop. Reviewed-by:
Felipe Clark <felipe.clark@amd.com> Acked-by:
Leo (Hanghong) Ma <hanghong.ma@amd.com> Tested-by:
-
Nasir Osman authored
[why] HUBP_UNBOUNDED_REQ_MODE being enabled while the display is rotated (eg. going from Portrait mode to Landscape mode) appears to be causing a p-state hang, specifically during full screen mode on the Tiktok PC app. Unbounded request mode doesn't appear to be supported with rotation configs, hence disabling it. [how] Within DML, modified unbounded request mode to be configured only when the rotation angle of the plane is 0. Reviewed-by:
-
Yifan Zha authored
[Why] Regression of commit 72fef498 ("drm/amdgpu: Remove writing GRBM_GFX_CNTL in RLCG interface under SRIOV") on GFX9. According to GFX9 VF using different method to access GC registers including MMIO(direct) and RLCG(indirect), removing GRBM_GFX_* writing would make PIPE/ME/VM/QUEUE selection chaos leading to some OCL benchmark failure. For example, using RLCG interface to program GRBM_GFX_CNTL/INDEX for selecting MEC(actually the value is only in scratch2/3), then using MMIO directly program a MEC register in VF driver. The register programming are invalid due to GC switched to incorrect ME. [How] With checking RLCG accessing flag, keep writing GRBM_GFX_* as a legacy way. But it is still skipped on GFX10+ to avoid violation occurrence. Signed-off-by:
Yifan Zha <Yifan.Zha@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Jiapeng Chong authored
Variable pre_connection_type is not effectively used, so delete it. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4031Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Jiapeng Chong authored
Variable ds_port is not effectively used, so delete it. drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c:280:35: warning: variable ‘ds_port’ set but not used. Reported-by:
-
Nasir Osman authored
[why] Newer ASICs such as DCN314 needs to allow for both self refresh and mem clk switching rather than just self refresh only. Otherwise, we can see some p-state hangs on ASICs that do support mem clk switching. [how] Added an allow_self_refresh_only flag for dcn30_internal_validate_bw and created a validate_bw method for DCN314 with the allow_self_refresh_only flag set to false (to support mem clk switching). Reviewed-by:
Nasir Osman <nasir.osman@amd.com> Tested-by:
-
Tom Chung authored
[Why] Dmub will cache the video position data during PSR-SU enable. The dmub will use an outdated MPO video position if user try to drag the video window and it will cause video glitch. [How] Disable the PSR-SU temporarily while user drag the video window. The PSR-SU will be re-enabled after the video window is stable. Reviewed-by:
Sun peng Li <Sunpeng.Li@amd.com> Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Tested-by:
-
Yang Li authored
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c:145 get_ddc_line() warn: inconsistent indenting drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c:201 dc_link_construct_phy() warn: inconsistent indenting Reported-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Yang Li authored
./drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_capability.c:1610:68-73: WARNING: conversion to bool not needed here Reported-by:
-
Charlene Liu authored
[Why] In virtual link use case, link->ddc could be NULL. [How] Add null pointer check to avoid undefined behavior. Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Reviewed-by:
-
Wenjing Liu authored
[why] We mistakenly toggle dpms state for non master pipe when handling link lost. A non master pipe doesn't connect to a backend. So it is toggling dpms for non master is undefined and caused NULL pointer dereference. [how] Add helper functions to find an array of active master pipes for current link and only toggle DPMS for active master pipes connected to the link. Add assert in case we get called to program dpms with non master pipe. Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Acked-by:
-
Wenjing Liu authored
[why] A recent change was made to implement temporary workaround due DRM update in MST interfaces. The workaround is added into our generic deallocation MST sequence. This ticket is to extract this temporary workaround into its own function so it is differentiated from our generic sequence. Reviewed-by:
Jerry Zuo <Jerry.Zuo@amd.com> Acked-by:
-
Samson Tam authored
[Why] In disable_dangling_plane, for phantom pipes, we enable OTG so disable programming gets the double buffer update. But this causes an underflow to occur. [How] Enable DPG prior to enabling OTG. Reviewed-by:
Samson Tam <samson.tam@amd.com> Tested-by:
-
Daniel Miess authored
This reverts commit f5df7725 [Why] This commit causes corruption when viewing a P010 video clip on a 300Hz eDP Reviewed-by:
Daniel Miess <Daniel.Miess@amd.com> Tested-by:
-
Wenjing Liu authored
[why] a recent regression has caused us to mistakenly switch RX back to SST mode when there are remaining mst stream enabled to the link. We are missing a condition check for stream count before setting RX back to SST mode. [how] Add stream count check condition back and do some further refactor so the logic is easier to understand to prevent future coding error in this sequence. Reviewed-by:
-
Alvin Lee authored
[Why & How] - For prefetch max vratio check, use the calculated prefetch bandwidth from dml32_CalculatePrefetchSchedule instead of max prefetch bandwidth - Also multiply prefetch bandwidth by VRatio since scaling is not considered one calculating require prefetch bw Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] To align with DCN31 behavior. This helps avoid p-state hangs in the case where underflow does occur. [How] Flip the bit to true. Reviewed-by:
-
Aurabindo Pillai authored
[Why & How] When k1 and k2 divider programming logic is executed for a phantom stream, the corresponding master stream should be used for the calculation. Fix the if condition to use the master stream for checking signal type instead of the phantom stream. Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Alvin Lee authored
[Description] - Single 4K60 playing YUV420 MPO video blocks P-State because the required VRatio for prefetch is too high (luma plane for YUV420 is 1bpe, so swath height is 16 and prefetch requires more lines) - Allow max vratio per plane to be 7.9 for single display YUV420 MPO video cases - Ensure that global vratio prefetch (i.e. total prefetch BW vs. total active bandwidth) does not excited 4.0 Reviewed-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] DOMAIN power gating control is now required to be done via firmware due to interlock with other power features. This is to avoid intermittent issues in the LB memories. [How] If the firmware supports the command then use the new firmware as the sequence can avoid potential display corruption issues. The command will be ignored on firmware that does not support DOMAIN power control and the pipes will remain always on - frequent PG cycling can cause the issue to occur on the old sequence, so we should avoid it. Reviewed-by:
-
Kenneth Feng authored
implement mode2 reset on smu_v13_0_10 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
-
Xiaogang Chen authored
When xnack is on user space can use svm page restore to set a vm range without setup it first, then use regular api to register. Currently kfd api and svm are not interoperable. We already have check on that, but for user buffer the mapping address is not same as buffer cpu virtual address. Add checking on that to avoid error propagate to hmm. Signed-off-by:
Xiaogang Chen <xiaogang.chen@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Ma Jun authored
Checking INVOKE_CMD to fix the below warning info when unload or remove amdgpu driver [ 319.489809] Call Trace: [ 319.489810] <TASK> [ 319.489812] psp_ta_unload+0x9a/0xd0 [amdgpu] [ 319.489926] ? smu_smc_hw_cleanup+0x2f6/0x360 [amdgpu] [ 319.490072] psp_hw_fini+0xea/0x170 [amdgpu] [ 319.490231] amdgpu_device_fini_hw+0x2fc/0x413 [amdgpu] [ 319.490398] ? blocking_notifier_chain_unregister+0x56/0xb0 [ 319.490401] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu] [ 319.490493] amdgpu_pci_remove+0x5a/0x140 [amdgpu] [ 319.490583] ? __pm_runtime_resume+0x60/0x90 [ 319.490586] pci_device_remove+0x3b/0xb0 [ 319.490588] __device_release_driver+0x1a8/0x2a0 [ 319.490591] driver_detach+0xf3/0x140 [ 319.490593] bus_remove_driver+0x6c/0xf0 [ 319.490595] driver_unregister+0x31/0x60 [ 319.490597] pci_unregister_driver+0x40/0x90 [ 319.490599] amdgpu_exit+0x15/0x44e [amdgpu] Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Reviewed-by:
-
- 09 Feb, 2023 8 commits
-
-
Alex Deucher authored
This reverts commit 3cc67fe1. Some users have reported flickerng with S/G display. We've tried extensively to reproduce and debug the issue on a wide variety of platform configurations (DRAM bandwidth, etc.) and a variety of monitors, but so far have not been able to. We disabled S/G display on a number of platforms to address this but that leads to failure to pin framebuffers errors and blank displays when there is memory pressure or no displays at all on systems with limited carveout (e.g., Chromebooks). We have a parameter to disable this as a debugging option as a way for users to disable this, depending on their use case, and for us to help debug this further. Having this enabled seems like the lesser of to evils. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Acked-by:
-
Alex Deucher authored
This reverts commit 2404f9b0. Some users have reported flickerng with S/G display. We've tried extensively to reproduce and debug the issue on a wide variety of platform configurations (DRAM bandwidth, etc.) and a variety of monitors, but so far have not been able to. We disabled S/G display on a number of platforms to address this but that leads to failure to pin framebuffers errors and blank displays when there is memory pressure or no displays at all on systems with limited carveout (e.g., Chromebooks). We have a parameter to disable this as a debugging option as a way for users to disable this, depending on their use case, and for us to help debug this further. Having this enabled seems like the lesser of to evils. Reviewed-by:
-
Alex Deucher authored
This reverts commit f081cd4c. Some users have reported flickerng with S/G display. We've tried extensively to reproduce and debug the issue on a wide variety of platform configurations (DRAM bandwidth, etc.) and a variety of monitors, but so far have not been able to. We disabled S/G display on a number of platforms to address this but that leads to failure to pin framebuffers errors and blank displays when there is memory pressure or no displays at all on systems with limited carveout (e.g., Chromebooks). We have a parameter to disable this as a debugging option as a way for users to disable this, depending on their use case, and for us to help debug this further. Having this enabled seems like the lesser of to evils. Reviewed-by:
-
Alex Deucher authored
Some users have reported flickerng with S/G display. We've tried extensively to reproduce and debug the issue on a wide variety of platform configurations (DRAM bandwidth, etc.) and a variety of monitors, but so far have not been able to. We disabled S/G display on a number of platforms to address this but that leads to failure to pin framebuffers errors and blank displays when there is memory pressure or no displays at all on systems with limited carveout (e.g., Chromebooks). Add a option to disable this as a debugging option as a way for users to disable this, depending on their use case, and for us to help debug this further. v2: fix typo Reviewed-by:
-
Colin Ian King authored
The function name is being reported as dc_link_contruct when it is actually dc_link_construct_phy. Fix this by using %s and the __func__ for the function name. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Ye Xingchen authored
link_hwss.h is included more than once in link_dpms.c . Signed-off-by:
Ye Xingchen <ye.xingchen@zte.com.cn> Signed-off-by:
-
Arnd Bergmann authored
When CONFIG_DRM_AMD_DC_DCN is disabled, the is_frl member is not defined: drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_validation.c: In function 'dp_active_dongle_validate_timing': drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_validation.c:126:66: error: 'const struct dc_dsc_config' has no member named 'is_frl' 126 | if (timing->flags.DSC && !timing->dsc_cfg.is_frl) | ^ Use the same #ifdef as the other references to this. Fixes: 54618888 ("drm/amd/display: break down dc_link.c") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Tom Rix authored
smatch reports drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c:90:6: warning: symbol 'should_disable_otg' was not declared. Should it be static? should_disable_otg() is only used in dcn315_clk_mgr.c, so it should be static Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
