The generated asm/unistd_compat_32.h header file now contains
macros that can be used directly in the vdso and the signal
trampolines, so remove the duplicate definitions.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Change the asm/unistd.h header for arm64 to no longer include
asm-generic/unistd.h itself, but instead generate both the asm/unistd.h
contents and the list of entry points using the syscall.tbl scripts that
we use on most other architectures.

Once his is done for the remaining architectures, the generic unistd.h
header can be removed and the generated tbl file put in its place.

The Makefile changes are more complex than they should be, I need
a little help to improve those. Ideally this should be done in an
architecture-independent way as well.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This is a straight conversion from the old asm/unistd32.h into the
format used by 32-bit arm and most other architectures, calling scripts
to generate the asm/unistd32.h header and a new asm/syscalls32.h headers.

I used a semi-automated text replacement method to do the conversion,
and then used 'vimdiff' to synchronize the whitespace and the (unused)
names of the non-compat syscalls with the arm version.

There are two differences between the generated syscalls names and the
old version:

 - the old asm/unistd32.h contained only a __NR_sync_file_range2
   entry, while the arm32 version also defines
   __NR_arm_sync_file_range with the same number. I added this
   duplicate back in asm/unistd32.h.

 - __NR__sysctl was removed from the arm64 file a while ago, but
   all the tables still contain it. This should probably get removed
   everywhere but I added it here for consistency.

On top of that, the arm64 version does not contain any references to
the 32-bit OABI syscalls that are not supported by arm64. If we ever
want to share the file between arm32 and arm64, it would not be
hard to add support for both in one file.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The uapi/asm/unistd_32.h and asm/syscall_table_32.h headers can now be
generated from scripts/syscall.tbl, which makes this consistent with
the other architectures that have their own syscall.tbl.

arc has a couple of architecture specific system calls, which I add to the
generic table. This for some reason includes the deprecated sys_sysfs()
syscall that was presumably added by accident.

The time32, renameat, stat64 and rlimit entries in the syscall_abis_32
entry are for system calls that were part of the generic ABI when arch/arc
got added but are no longer enabled by default for new architectures.

Both the user visible side of asm/unistd.h and the internal syscall
table in the kernel should have the same effective contents after this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

When clone3() was introduced, it was not obvious how each architecture
deals with setting up the stack and keeping the register contents in
a fork()-like system call, so this was left for the architecture
maintainers to implement, with __ARCH_WANT_SYS_CLONE3 defined by those
that already implement it.

Five years later, we still have a few architectures left that are missing
clone3(), and the macro keeps getting in the way as it's fundamentally
different from all the other __ARCH_WANT_SYS_* macros that are meant
to provide backwards-compatibility with applications using older
syscalls that are no longer provided by default.

Address this by reversing the polarity of the macro, adding an
__ARCH_BROKEN_SYS_CLONE3 macro to all architectures that don't
already provide the syscall, and remove __ARCH_WANT_SYS_CLONE3
from all the other ones.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

There are 11 copies of arch/*/kernel/syscalls/Makefile that all implement
the same basic logic in a somewhat awkward way.

I tried out various ways of unifying the existing copies and ended up
with something that hooks into the logic for generating the redirections
to asm-generic headers. This gives a nicer syntax of being able to list
the generated files in $(syscall-y) inside of arch/*/include/asm/Kbuild
instead of both $(generated-y) in that place and also in another
Makefile.

The configuration for which syscall.tbl file to use and which ABIs to
enable is now done in arch/*/kernel/Makefile.syscalls. I have done
patches for all architectures and made sure that the new generic
rules implement a superset of all the architecture specific corner
cases.

ince the header file is not specific to asm-generic/*.h redirects
now, I ended up renaming the file to scripts/Makefile.asm-headers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

In order to integrate the system call header generation with generating
the asm-generic wrappers, restrict the generated headers to those that
actually exist in include/asm-generic/.

The path is already known, so add these as a dependency.

The asm-generic/bugs.h header was removed in commit 61235b24 ("init:
Remove check_bugs() leftovers"), which now causes a build failure, so
drop it from the list.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The list of generated headers is rather outdated, some of these no longer
exist, while others are already listed in include/asm-generic/Kbuild
so there is no need to list them here.

As we start validating the list of headers against the files that exist,
the outdated ones now cause a warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

If we start validating the existence of the asm-generic side of
generated headers, this one causes a warning:

make[3]: *** No rule to make target 'arch/um/include/generated/asm/bpf_perf_event.h', needed by 'all'.  Stop.

The problem is that the asm-generic header only exists for the uapi
variant, but arch/um has no uapi headers and instead uses the x86
userspace API.

Add a custom file with an explicit redirect to avoid this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The asm/gpio.h header is gone now that all architectures just use
gpiolib, and so the redirect is no longer valid.
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The asm-generic/unistd.h header still follows the old style of defining
system call numbers and the table. Most architectures got the new
syscall.tbl format as part of the y2038 conversion back in 2018, but
the newer architectures that share a single table never did.

I did a semi-automated conversion of the asm-generic/unistd.h contents
into a syscall.tbl format, using the ABI field to take care of all
the relevant differences that are encoded using #ifdef checks in the
existing header.

Conversion of the architectures is done one at a time in order to
be able to review or revert them as needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull ata fixes from Niklas Cassel:

 - Add NOLPM quirk for for all Crucial BX SSD1 models.

   Considering that we now have had bug reports for 3 different BX SSD1
   variants from Crucial with the same product name, make the quirk more
   inclusive, to catch more device models from the same generation.

 - Fix a trivial NULL pointer dereference in the error path for
   ata_host_release().

 - Create a ata_port_free(), so that we don't miss freeing ata_port
   struct members when freeing a struct ata_port.

 - Fix a trivial double free in the error path for ata_host_alloc().

 - Ensure that we remove the libata "remapped NVMe device count" sysfs
   entry on .probe() error.

* tag 'ata-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: ahci: Clean up sysfs file on error
  ata: libata-core: Fix double free on error
  ata,scsi: libata-core: Do not leak memory for ata_port struct members
  ata: libata-core: Fix null pointer dereference on error
  ata: libata-core: Add ATA_HORKAGE_NOLPM for all Crucial BX SSD1 models

.probe() (ahci_init_one()) calls sysfs_add_file_to_group(), however,
if probe() fails after this call, we currently never call
sysfs_remove_file_from_group().

(The sysfs_remove_file_from_group() call in .remove() (ahci_remove_one())
does not help, as .remove() is not called on .probe() error.)

Thus, if probe() fails after the sysfs_add_file_to_group() call, the next
time we insmod the module we will get:

sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/remapped_nvme'
CPU: 11 PID: 954 Comm: modprobe Not tainted 6.10.0-rc5 #43
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x5d/0x80
 sysfs_warn_dup.cold+0x17/0x23
 sysfs_add_file_mode_ns+0x11a/0x130
 sysfs_add_file_to_group+0x7e/0xc0
 ahci_init_one+0x31f/0xd40 [ahci]

Fixes: 894fba7f ("ata: ahci: Add sysfs attribute to show remapped NVMe device count")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240629124210.181537-10-cassel@kernel.orgSigned-off-by: Niklas Cassel <cassel@kernel.org>

If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump
to the err_out label, which will call devres_release_group().
devres_release_group() will trigger a call to ata_host_release().
ata_host_release() calls kfree(host), so executing the kfree(host) in
ata_host_alloc() will lead to a double free:

kernel BUG at mm/slub.c:553!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 11 PID: 599 Comm: (udev-worker) Not tainted 6.10.0-rc5 #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:kfree+0x2cf/0x2f0
Code: 5d 41 5e 41 5f 5d e9 80 d6 ff ff 4d 89 f1 41 b8 01 00 00 00 48 89 d9 48 89 da
RSP: 0018:ffffc90000f377f0 EFLAGS: 00010246
RAX: ffff888112b1f2c0 RBX: ffff888112b1f2c0 RCX: ffff888112b1f320
RDX: 000000000000400b RSI: ffffffffc02c9de5 RDI: ffff888112b1f2c0
RBP: ffffc90000f37830 R08: 0000000000000000 R09: 0000000000000000
R10: ffffc90000f37610 R11: 617461203a736b6e R12: ffffea00044ac780
R13: ffff888100046400 R14: ffffffffc02c9de5 R15: 0000000000000006
FS:  00007f2f1cabe980(0000) GS:ffff88813b380000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2f1c3acf75 CR3: 0000000111724000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
 <TASK>
 ? __die_body.cold+0x19/0x27
 ? die+0x2e/0x50
 ? do_trap+0xca/0x110
 ? do_error_trap+0x6a/0x90
 ? kfree+0x2cf/0x2f0
 ? exc_invalid_op+0x50/0x70
 ? kfree+0x2cf/0x2f0
 ? asm_exc_invalid_op+0x1a/0x20
 ? ata_host_alloc+0xf5/0x120 [libata]
 ? ata_host_alloc+0xf5/0x120 [libata]
 ? kfree+0x2cf/0x2f0
 ata_host_alloc+0xf5/0x120 [libata]
 ata_host_alloc_pinfo+0x14/0xa0 [libata]
 ahci_init_one+0x6c9/0xd20 [ahci]

Ensure that we will not call kfree(host) twice, by performing the kfree()
only if the devres_open_group() call failed.

Fixes: dafd6c49 ("libata: ensure host is free'd on error exit paths")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240629124210.181537-9-cassel@kernel.orgSigned-off-by: Niklas Cassel <cassel@kernel.org>

libsas is currently not freeing all the struct ata_port struct members,
e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL).

Add a function, ata_port_free(), that is used to free a ata_port,
including its struct members. It makes sense to keep the code related to
freeing a ata_port in its own function, which will also free all the
struct members of struct ata_port.

Fixes: 18bd7718 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240629124210.181537-8-cassel@kernel.orgSigned-off-by: Niklas Cassel <cassel@kernel.org>

If the ata_port_alloc() call in ata_host_alloc() fails,
ata_host_release() will get called.

However, the code in ata_host_release() tries to free ata_port struct
members unconditionally, which can lead to the following:

BUG: unable to handle page fault for address: 0000000000003990
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 10 PID: 594 Comm: (udev-worker) Not tainted 6.10.0-rc5 #44
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:ata_host_release.cold+0x2f/0x6e [libata]
Code: e4 4d 63 f4 44 89 e2 48 c7 c6 90 ad 32 c0 48 c7 c7 d0 70 33 c0 49 83 c6 0e 41
RSP: 0018:ffffc90000ebb968 EFLAGS: 00010246
RAX: 0000000000000041 RBX: ffff88810fb52e78 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88813b3218c0 RDI: ffff88813b3218c0
RBP: ffff88810fb52e40 R08: 0000000000000000 R09: 6c65725f74736f68
R10: ffffc90000ebb738 R11: 73692033203a746e R12: 0000000000000004
R13: 0000000000000000 R14: 0000000000000011 R15: 0000000000000006
FS:  00007f6cc55b9980(0000) GS:ffff88813b300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000003990 CR3: 00000001122a2000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
 <TASK>
 ? __die_body.cold+0x19/0x27
 ? page_fault_oops+0x15a/0x2f0
 ? exc_page_fault+0x7e/0x180
 ? asm_exc_page_fault+0x26/0x30
 ? ata_host_release.cold+0x2f/0x6e [libata]
 ? ata_host_release.cold+0x2f/0x6e [libata]
 release_nodes+0x35/0xb0
 devres_release_group+0x113/0x140
 ata_host_alloc+0xed/0x120 [libata]
 ata_host_alloc_pinfo+0x14/0xa0 [libata]
 ahci_init_one+0x6c9/0xd20 [ahci]

Do not access ata_port struct members unconditionally.

Fixes: 633273a3 ("libata-pmp: hook PMP support and enable it")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240629124210.181537-7-cassel@kernel.orgSigned-off-by: Niklas Cassel <cassel@kernel.org>

Merge tag 'kbuild-fixes-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Remove the executable bit from installed DTB files

 - Escape $ in subshell execution in the debian-orig target

 - Fix RPM builds with CONFIG_MODULES=n

 - Fix xconfig with the O= option

 - Fix scripts_gdb with the O= option

* tag 'kbuild-fixes-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: scripts/gdb: bring the "abspath" back
  kbuild: Use $(obj)/%.cc to fix host C++ module builds
  kbuild: rpm-pkg: fix build error with CONFIG_MODULES=n
  kbuild: Fix build target deb-pkg: ln: failed to create hard link
  kbuild: doc: Update default INSTALL_MOD_DIR from extra to updates
  kbuild: Install dtb files as 0644 in Makefile.dtbinst

The kernel test robot reported that clang no longer compiles the 32-bit
x86 kernel in some configurations due to commit 95ece481
("locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}()
functions").

The build fails with

  arch/x86/include/asm/cmpxchg_32.h:149:9: error: inline assembly requires more registers than available

and the reason seems to be that not only does the cmpxchg8b instruction
need four fixed registers (EDX:EAX and ECX:EBX), with the emulation
fallback the inline asm also wants a fifth fixed register for the
address (it uses %esi for that, but that's just a software convention
with cmpxchg8b_emu).

Avoiding using another pointer input to the asm (and just forcing it to
use the "0(%esi)" addressing that we end up requiring for the sw
fallback) seems to fix the issue.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406230912.F6XFIyA6-lkp@intel.com/
Fixes: 95ece481 ("locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}() functions")
Link: https://lore.kernel.org/all/202406230912.F6XFIyA6-lkp@intel.com/Suggested-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-and-Tested-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull char/misc driver fixes from Greg KH:
 "Here are some small driver fixes for 6.10-rc6. Included in here are:

   - IIO driver fixes for reported issues

   - Counter driver fix for a reported problem.

  All of these have been in linux-next this week with no reported
  issues"

* tag 'char-misc-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  counter: ti-eqep: enable clock at probe
  iio: chemical: bme680: Fix sensor data read operation
  iio: chemical: bme680: Fix overflows in compensate() functions
  iio: chemical: bme680: Fix calibration data variable
  iio: chemical: bme680: Fix pressure value output
  iio: humidity: hdc3020: fix hysteresis representation
  iio: dac: fix ad9739a random config compile error
  iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF
  iio: adc: ad7266: Fix variable checking bug
  iio: xilinx-ams: Don't include ams_ctrl_channels in scan_mask

Pull staging driver fixes from Greg KH:
 "Here are two small staging driver fixes for 6.10-rc6, both for the
  vc04_services drivers:

   - build fix if CONFIG_DEBUGFS was not set

   - initialization check fix that was much reported.

  Both of these have been in linux-next this week with no reported
  issues"

* tag 'staging-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vchiq_debugfs: Fix build if CONFIG_DEBUG_FS is not set
  staging: vc04_services: vchiq_arm: Fix initialisation check

Pull tty / serial / console fixes from Greg KH:
 "Here are a bunch of fixes/reverts for 6.10-rc6.  Include in here are:

   - revert the bunch of tty/serial/console changes that landed in -rc1
     that didn't quite work properly yet.

     Everyone agreed to just revert them for now and will work on making
     them better for a future release instead of trying to quick fix the
     existing changes this late in the release cycle

   - 8250 driver port count bugfix

   - Other tiny serial port bugfixes for reported issues

  All of these have been in linux-next this week with no reported
  issues"

* tag 'tty-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "printk: Save console options for add_preferred_console_match()"
  Revert "printk: Don't try to parse DEVNAME:0.0 console options"
  Revert "printk: Flag register_console() if console is set on command line"
  Revert "serial: core: Add support for DEVNAME:0.0 style naming for kernel console"
  Revert "serial: core: Handle serial console options"
  Revert "serial: 8250: Add preferred console in serial8250_isa_init_ports()"
  Revert "Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports"
  Revert "serial: 8250: Fix add preferred console for serial8250_isa_init_ports()"
  Revert "serial: core: Fix ifdef for serial base console functions"
  serial: bcm63xx-uart: fix tx after conversion to uart_port_tx_limited()
  serial: core: introduce uart_port_tx_limited_flags()
  Revert "serial: core: only stop transmit when HW fifo is empty"
  serial: imx: set receiver level before starting uart
  tty: mcf: MCF54418 has 10 UARTS
  serial: 8250_omap: Implementation of Errata i2310
  tty: serial: 8250: Fix port count mismatch with the device

Pull USB fixes from Greg KH:
 "Here are a handful of small USB driver fixes for 6.10-rc6 to resolve
  some reported issues. Included in here are:

   - typec driver bugfixes

   - usb gadget driver reverts for commits that were reported to have
     problems

   - resource leak bugfix

   - gadget driver bugfixes

   - dwc3 driver bugfixes

   - usb atm driver bugfix for when syzbot got loose on it

  All of these have been in linux-next this week with no reported issues"

* tag 'usb-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc3: core: Workaround for CSR read timeout
  Revert "usb: gadget: u_ether: Replace netif_stop_queue with netif_device_detach"
  Revert "usb: gadget: u_ether: Re-attach netif device to mirror detachment"
  usb: gadget: aspeed_udc: fix device address configuration
  usb: dwc3: core: remove lock of otg mode during gadget suspend/resume to avoid deadlock
  usb: typec: ucsi: glink: fix child node release in probe function
  usb: musb: da8xx: fix a resource leak in probe()
  usb: typec: ucsi_acpi: Add LG Gram quirk
  usb: ucsi: stm32: fix command completion handling
  usb: atm: cxacru: fix endpoint checking in cxacru_bind()
  usb: gadget: printer: fix races against disable
  usb: gadget: printer: SS+ support

Pull smp fixes from Borislav Petkov:

 - Fix "nosmp" and "maxcpus=0" after the parallel CPU bringup work went
   in and broke them

 - Make sure CPU hotplug dynamic prepare states are actually executed

* tag 'smp_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu: Fix broken cmdline "nosmp" and "maxcpus=0"
  cpu/hotplug: Fix dynstate assignment in __cpuhp_setup_state_cpuslocked()

Pull irq fixes from Borislav Petkov:

 - Make sure multi-bridge machines get all eiointc interrupt controllers
   initialized even if the number of CPUs has been limited by a cmdline
   param

 - Make sure interrupt lines on liointc hw are configured properly even
   when interrupt routing changes

 - Avoid use-after-free in the error path of the MSI init code

* tag 'irq_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  PCI/MSI: Fix UAF in msi_capability_init
  irqchip/loongson-liointc: Set different ISRs for different cores
  irqchip/loongson-eiointc: Use early_cpu_to_node() instead of cpu_to_node()

Pull timer fix from Borislav Petkov:

 - Warn when an hrtimer doesn't get a callback supplied

* tag 'timers_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Prevent queuing of hrtimer without a function callback

Pull watchdog fixes from Wim Van Sebroeck:

 - lenovo_se10_wdt: add HAS_IOPORT dependency

 - add missing MODULE_DESCRIPTION() macros

* tag 'linux-watchdog-6.10-rc-fixes' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: add missing MODULE_DESCRIPTION() macros
  watchdog: lenovo_se10_wdt: add HAS_IOPORT dependency

Pull NFS client fix from Trond Myklebust:

 - One more SUNRPC fix for the NFSv4.x backchannel timeouts

* tag 'nfs-for-6.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Fix backchannel reply, again

Pull xfs fixes from Chandan Babu:

 - Always free only post-EOF delayed allocations for files with the
   XFS_DIFLAG_PREALLOC or APPEND flags set.

 - Do not align cow fork delalloc to cowextsz hint when running low on
   space.

 - Allow zero-size symlinks and directories as long as the link count is
   zero.

 - Change XFS_IOC_EXCHANGE_RANGE to be a _IOW only ioctl. This was ioctl
   was introduced during v6.10 developement cycle.

 - xfs_init_new_inode() now creates an attribute fork on a newly created
   inode even if ATTR feature flag is not enabled.

* tag 'xfs-6.10-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: honor init_xattrs in xfs_init_new_inode for !ATTR fs
  xfs: fix direction in XFS_IOC_EXCHANGE_RANGE
  xfs: allow unlinked symlinks and dirs with zero size
  xfs: restrict when we try to align cow fork delalloc to cowextsz hints
  xfs: fix freeing speculative preallocations for preallocated files

Pull i2c fixes from Wolfram Sang:
 "Two fixes for the testunit and and a fixup for the code reorganization
  of the previous wmt-driver"

* tag 'i2c-for-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: testunit: discard write requests while old command is running
  i2c: testunit: don't erase registers after STOP
  i2c: viai2c: turn common code into a proper module

Merge tag 'platform-drivers-x86-v6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - Fix lg-laptop driver not working with 2024 LG laptop models

 - Add missing MODULE_DESCRIPTION() macros to various modules

 - nvsw-sn2201: Add check for platform_device_add_resources

* tag 'platform-drivers-x86-v6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: add missing MODULE_DESCRIPTION() macros
  platform/x86/intel: add missing MODULE_DESCRIPTION() macros
  platform/x86/siemens: add missing MODULE_DESCRIPTION() macros
  platform/x86: lg-laptop: Use ACPI device handle when evaluating WMAB/WMBB
  platform/x86: lg-laptop: Change ACPI device id
  platform/x86: lg-laptop: Remove LGEX0815 hotkey handling
  platform/x86: wireless-hotkey: Add support for LG Airplane Button
  platform/mellanox: nvsw-sn2201: Add check for platform_device_add_resources

Pull MMC fixes from Ulf Hansson:

 - moxart-mmc: Revert "mmc: moxart-mmc: Use sg_miter for PIO"

 - sdhci: Do not invert write-protect twice

 - sdhci: Do not lock spinlock around mmc_gpio_get_ro()

 - sdhci-pci/sdhci-pci-o2micro: Return proper error codes

 - sdhci-brcmstb: Fix support for erase/trim/discard

* tag 'mmc-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci: Do not lock spinlock around mmc_gpio_get_ro()
  mmc: sdhci: Do not invert write-protect twice
  Revert "mmc: moxart-mmc: Use sg_miter for PIO"
  mmc: sdhci-brcmstb: check R1_STATUS for erase/trim/discard
  mmc: sdhci-pci-o2micro: Convert PCIBIOS_* return codes to errnos
  mmc: sdhci-pci: Convert PCIBIOS_* return codes to errnos

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for vector load/store instruction decoding, which could result
   in reserved vector element length encodings decoding as valid vector
   instructions.

 - Instruction patching now aggressively flushes the local instruction
   cache, to avoid situations where patching functions on the flush path
   results in torn instructions being fetched.

 - A fix to prevent the stack walker from showing up as part of traces.

* tag 'riscv-for-linus-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: stacktrace: convert arch_stack_walk() to noinstr
  riscv: patch: Flush the icache right after patching to avoid illegal insns
  RISC-V: fix vector insn load/store width mask

Pull hardening fixes from Kees Cook:

 - Remove invalid tty __counted_by annotation (Nathan Chancellor)

 - Add missing MODULE_DESCRIPTION()s for KUnit string tests (Jeff
   Johnson)

 - Remove non-functional per-arch kstack entropy filtering

* tag 'hardening-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  tty: mxser: Remove __counted_by from mxser_board.ports[]
  randomize_kstack: Remove non-functional per-arch entropy filtering
  string: kunit: add missing MODULE_DESCRIPTION() macros

The 'profile_pc()' function is used for timer-based profiling, which
isn't really all that relevant any more to begin with, but it also ends
up making assumptions based on the stack layout that aren't necessarily
valid.

Basically, the code tries to account the time spent in spinlocks to the
caller rather than the spinlock, and while I support that as a concept,
it's not worth the code complexity or the KASAN warnings when no serious
profiling is done using timers anyway these days.

And the code really does depend on stack layout that is only true in the
simplest of cases.  We've lost the comment at some point (I think when
the 32-bit and 64-bit code was unified), but it used to say:

	Assume the lock function has either no stack frame or a copy
	of eflags from PUSHF.

which explains why it just blindly loads a word or two straight off the
stack pointer and then takes a minimal look at the values to just check
if they might be eflags or the return pc:

	Eflags always has bits 22 and up cleared unlike kernel addresses

but that basic stack layout assumption assumes that there isn't any lock
debugging etc going on that would complicate the code and cause a stack
frame.

It causes KASAN unhappiness reported for years by syzkaller [1] and
others [2].

With no real practical reason for this any more, just remove the code.

Just for historical interest, here's some background commits relating to
this code from 2006:

  0cb91a22 ("i386: Account spinlocks to the caller during profiling for !FP kernels")
  31679f38 ("Simplify profile_pc on x86-64")

and a code unification from 2009:

  ef451288 ("x86: time_32/64.c unify profile_pc")

but the basics of this thing actually goes back to before the git tree.

Link: https://syzkaller.appspot.com/bug?extid=84fe685c02cd112a2ac3 [1]
Link: https://lore.kernel.org/all/CAK55_s7Xyq=nh97=K=G1sxueOFrJDAvPOJAL4TPTCAYvmxO9_A@mail.gmail.com/ [2]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When clearing registers on new write requests was added, the protection
for currently running commands was missed leading to concurrent access
to the testunit registers. Check the flag beforehand.

Fixes: b39ab96a ("i2c: testunit: add support for block process calls")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>

STOP fallsthrough to WRITE_REQUESTED but this became problematic when
clearing the testunit registers was added to the latter. Actually, there
is no reason to clear the testunit state after STOP. Doing it when a new
WRITE_REQUESTED arrives is enough. So, no need to fallthrough, at all.

Fixes: b39ab96a ("i2c: testunit: add support for block process calls")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>

Merge tag 'i2c-host-fixes-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

Fixed a build error following the major refactoring involving the
VIA-I2C modules. Originally, the code was split to group together
parts that would be used by different drivers. This caused build
issues when two modules linked to the same code.

Pull nfsd fixes from Chuck Lever:

 - Due to a late review, revert and re-fix a recent crasher fix

* tag 'nfsd-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  Revert "nfsd: fix oops when reading pool_stats before server is started"
  nfsd: initialise nfsd_info.mutex early.

Pull bcachefs fixes from Kent Overstreet:
 "Simple stuff:

   - NULL ptr/err ptr deref fixes

   - fix for getting wedged on shutdown after journal error

   - fix missing recalc_capacity() call, capacity now changes correctly
     after a device goes read only

     however: our capacity calculation still doesn't take into account
     when we have mixed ro/rw devices and the ro devices have data on
     them, that's going to be a more involved fix to separate accounting
     for "capacity used on ro devices" and "capacity used on rw devices"

   - boring syzbot stuff

  Slightly more involved:

   - discard, invalidate workers are now per device

     this has the effect of simplifying how we take device refs in these
     paths, and the device ref cleanup fixes a longstanding race between
     the device removal path and the discard path

   - fixes for how the debugfs code takes refs on btree_trans objects we
     have debugfs code that prints in use btree_trans objects.

     It uses closure_get() on trans->ref, which is mainly for the cycle
     detector, but the debugfs code was using it on a closure that may
     have hit 0, which is not allowed; for performance reasons we cannot
     avoid having not-in-use transactions on the global list.

     Introduce some new primitives to fix this and make the
     synchronization here a whole lot saner"

* tag 'bcachefs-2024-06-28' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Fix kmalloc bug in __snapshot_t_mut
  bcachefs: Discard, invalidate workers are now per device
  bcachefs: Fix shift-out-of-bounds in bch2_blacklist_entries_gc
  bcachefs: slab-use-after-free Read in bch2_sb_errors_from_cpu
  bcachefs: Add missing bch2_journal_do_writes() call
  bcachefs: Fix null ptr deref in journal_pins_to_text()
  bcachefs: Add missing recalc_capacity() call
  bcachefs: Fix btree_trans list ordering
  bcachefs: Fix race between trans_put() and btree_transactions_read()
  closures: closure_get_not_zero(), closure_return_sync()
  bcachefs: Make btree_deadlock_to_text() clearer
  bcachefs: fix seqmutex_relock()
  bcachefs: Fix freeing of error pointers