- 06 Nov, 2021 40 commits
-
-
Ira Weiny authored
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace the uses of kmap_atomic() within the highmem code. On profiling clear_huge_page() using ftrace an improvement of 62% was observed on the below setup. Setup:- Below data has been collected on Qualcomm's SM7250 SoC THP enabled (kernel v4.19.113) with only CPU-0(Cortex-A55) and CPU-7(Cortex-A76) switched on and set to max frequency, also DDR set to perf governor. FTRACE Data:- Base data:- Number of iterations: 48 Mean of allocation time: 349.5 us std deviation: 74.5 us v4 data:- Number of iterations: 48 Mean of allocation time: 131 us std deviation: 32.7 us The following simple userspace experiment to allocate 100MB(BUF_SZ) of pages and writing to it gave us a good insight, we observed an improvement of 42% in allocation and writing timings. ------------------------------------------------------------- Test code snippet ------------------------------------------------------------- clock_start(); buf = malloc(BUF_SZ); /* Allocate 100 MB of memory */ for(i=0; i < BUF_SZ_PAGES; i++) { *((int *)(buf + (i*PAGE_SIZE))) = 1; } clock_end(); ------------------------------------------------------------- Malloc test timings for 100MB anon allocation:- Base data:- Number of iterations: 100 Mean of allocation time: 31831 us std deviation: 4286 us v4 data:- Number of iterations: 100 Mean of allocation time: 18193 us std deviation: 4915 us [willy@infradead.org: fix zero_user_segments()] Link: https://lkml.kernel.org/r/YYVhHCJcm2DM2G9u@casper.infradead.org Link: https://lkml.kernel.org/r/20210204073255.20769-2-prathu.baronia@oneplus.comSigned-off-by:Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Prathu Baronia <prathu.baronia@oneplus.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Miaohe Lin authored
There is one possible race window between zs_pool_dec_isolated() and zs_unregister_migration() because wait_for_isolated_drain() checks the isolated count without holding class->lock and there is no order inside zs_pool_dec_isolated(). Thus the below race window could be possible: zs_pool_dec_isolated zs_unregister_migration check pool->destroying != 0 pool->destroying = true; smp_mb(); wait_for_isolated_drain() wait for pool->isolated_pages == 0 atomic_long_dec(&pool->isolated_pages); atomic_long_read(&pool->isolated_pages) == 0 Since we observe the pool->destroying (false) before atomic_long_dec() for pool->isolated_pages, waking pool->migration_wait up is missed. Fix this by ensure checking pool->destroying happens after the atomic_long_dec(&pool->isolated_pages). Link: https://lkml.kernel.org/r/20210708115027.7557-1-linmiaohe@huawei.com Fixes: 701d6785 ("mm/zsmalloc.c: fix race condition in zs_destroy_pool") Signed-off-by:Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Henry Burns <henryburns@google.com> Signed-off-by:
-
Alistair Popple authored
During migration special page table entries are installed for each page being migrated. These entries store the pfn and associated permissions of ptes mapping the page being migarted. Device-private pages use special swap pte entries to distinguish read-only vs. writeable pages which the migration code checks when creating migration entries. Normally this follows a fast path in migrate_vma_collect_pmd() which correctly copies the permissions of device-private pages over to migration entries when migrating pages back to the CPU. However the slow-path falls back to using try_to_migrate() which unconditionally creates read-only migration entries for device-private pages. This leads to unnecessary double faults on the CPU as the new pages are always mapped read-only even when they could be mapped writeable. Fix this by correctly copying device-private permissions in try_to_migrate_one(). Link: https://lkml.kernel.org/r/20211018045247.3128058-1-apopple@nvidia.comSigned-off-by:
Alistair Popple <apopple@nvidia.com> Reported-by:
Ralph Campbell <rcampbell@nvidia.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
David Hildenbrand authored
Let's communicate driver-managed regions to memblock, to properly teach kexec_file with CONFIG_ARCH_KEEP_MEMBLOCK to not place images on these memory regions. Link: https://lkml.kernel.org/r/20211004093605.5830-6-david@redhat.comSigned-off-by:
David Hildenbrand <david@redhat.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Jianyong Wu <Jianyong.Wu@arm.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Shahab Vahedi <shahab@synopsys.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Signed-off-by:
-
David Hildenbrand authored
Let's add a flag that corresponds to IORESOURCE_SYSRAM_DRIVER_MANAGED, indicating that we're dealing with a memory region that is never indicated in the firmware-provided memory map, but always detected and added by a driver. Similar to MEMBLOCK_HOTPLUG, most infrastructure has to treat such memory regions like ordinary MEMBLOCK_NONE memory regions -- for example, when selecting memory regions to add to the vmcore for dumping in the crashkernel via for_each_mem_range(). However, especially kexec_file is not supposed to select such memblocks via for_each_free_mem_range() / for_each_free_mem_range_reverse() to place kexec images, similar to how we handle IORESOURCE_SYSRAM_DRIVER_MANAGED without CONFIG_ARCH_KEEP_MEMBLOCK. We'll make sure that memory hotplug code sets the flag where applicable (IORESOURCE_SYSRAM_DRIVER_MANAGED) next. This prepares architectures that need CONFIG_ARCH_KEEP_MEMBLOCK, such as arm64, for virtio-mem support. Note that kexec *must not* indicate this memory to the second kernel and *must not* place kexec-images on this memory. Let's add a comment to kexec_walk_memblock(), documenting how we handle MEMBLOCK_DRIVER_MANAGED now just like using IORESOURCE_SYSRAM_DRIVER_MANAGED in locate_mem_hole_callback() for kexec_walk_resources(). Also note that MEMBLOCK_HOTPLUG cannot be reused due to different semantics: MEMBLOCK_HOTPLUG: memory is indicated as "System RAM" in the firmware-provided memory map and added to the system early during boot; kexec *has to* indicate this memory to the second kernel and can place kexec-images on this memory. After memory hotunplug, kexec has to be re-armed. We mostly ignore this flag when "movable_node" is not set on the kernel command line, because then we're told to not care about hotunpluggability of such memory regions. MEMBLOCK_DRIVER_MANAGED: memory is not indicated as "System RAM" in the firmware-provided memory map; this memory is always detected and added to the system by a driver; memory might not actually be physically hotunpluggable. kexec *must not* indicate this memory to the second kernel and *must not* place kexec-images on this memory. Link: https://lkml.kernel.org/r/20211004093605.5830-5-david@redhat.comSigned-off-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Jianyong Wu <Jianyong.Wu@arm.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Shahab Vahedi <shahab@synopsys.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Signed-off-by:
-
David Hildenbrand authored
We want to specify flags when hotplugging memory. Let's prepare to pass flags to memblock_add_node() by adjusting all existing users. Note that when hotplugging memory the system is already up and running and we might have concurrent memblock users: for example, while we're hotplugging memory, kexec_file code might search for suitable memory regions to place kexec images. It's important to add the memory directly to memblock via a single call with the right flags, instead of adding the memory first and apply flags later: otherwise, concurrent memblock users might temporarily stumble over memblocks with wrong flags, which will be important in a follow-up patch that introduces a new flag to properly handle add_memory_driver_managed(). Link: https://lkml.kernel.org/r/20211004093605.5830-4-david@redhat.comAcked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
-
David Hildenbrand authored
The description of MEMBLOCK_HOTPLUG is currently short and consequently misleading: we're actually dealing with a memory region that might get hotunplugged later (i.e., the platform+firmware supports it), yet it is indicated in the firmware-provided memory map as system ram that will just get used by the system for any purpose when not taking special care. The firmware marked this memory region as a hot(un)plugged (e.g., hotplugged before reboot), implying that it might get hotunplugged again later. Whether we consider this information depends on the "movable_node" kernel commandline parameter: only with "movable_node" set, we'll try keeping this memory hotunpluggable, for example, by not serving early allocations from this memory region and by letting the buddy manage it using the ZONE_MOVABLE. Let's make this clearer by extending the documentation. Note: kexec *has to* indicate this memory to the second kernel. With "movable_node" set, we don't want to place kexec-images on this memory. Without "movable_node" set, we don't care and can place kexec-images on this memory. In both cases, after successful memory hotunplug, kexec has to be re-armed to update the memory map for the second kernel and to place the kexec-images somewhere else. Link: https://lkml.kernel.org/r/20211004093605.5830-3-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
Patch series "mm/memory_hotplug: full support for add_memory_driver_managed() with CONFIG_ARCH_KEEP_MEMBLOCK", v2. Architectures that require CONFIG_ARCH_KEEP_MEMBLOCK=y, such as arm64, don't cleanly support add_memory_driver_managed() yet. Most prominently, kexec_file can still end up placing kexec images on such driver-managed memory, resulting in undesired behavior, for example, having kexec images located on memory not part of the firmware-provided memory map. Teaching kexec to not place images on driver-managed memory is especially relevant for virtio-mem. Details can be found in commit 7b7b2721 ("mm/memory_hotplug: introduce add_memory_driver_managed()"). Extend memblock with a new flag and set it from memory hotplug code when applicable. This is required to fully support virtio-mem on arm64, making also kexec_file behave like on x86-64. This patch (of 2): If memblock_add_node() fails, we're most probably running out of memory. While this is unlikely to happen, it can happen and having memory added without a memblock can be problematic for architectures that use memblock to detect valid memory. Let's fail in a nice way instead of silently ignoring the error. Link: https://lkml.kernel.org/r/20211004093605.5830-1-david@redhat.com Link: https://lkml.kernel.org/r/20211004093605.5830-2-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
CONFIG_MEMORY_HOTPLUG was marked BROKEN over one year and we just restricted it to 64 bit. Let's remove the unused x86 32bit implementation and simplify the Kconfig. Link: https://lkml.kernel.org/r/20210929143600.49379-7-david@redhat.comSigned-off-by:
Oscar Salvador <osalvador@suse.de> Cc: Alex Shi <alexs@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
David Hildenbrand authored
These functions no longer exist. Link: https://lkml.kernel.org/r/20210929143600.49379-6-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
We don't support CONFIG_MEMORY_HOTPLUG on 32 bit and consequently not HIGHMEM. Let's remove any leftover code -- including the unused "status_change_nid_high" field part of the memory notifier. Link: https://lkml.kernel.org/r/20210929143600.49379-5-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
32 bit support is broken in various ways: for example, we can online memory that should actually go to ZONE_HIGHMEM to ZONE_MOVABLE or in some cases even to one of the other kernel zones. We marked it BROKEN in commit b59d02ed ("mm/memory_hotplug: disable the functionality for 32b") almost one year ago. According to that commit it might be broken at least since 2017. Further, there is hardly a sane use case nowadays. Let's just depend completely on 64bit, dropping the "BROKEN" dependency to make clear that we are not going to support it again. Next, we'll remove some HIGHMEM leftovers from memory hotplug code to clean up. Link: https://lkml.kernel.org/r/20210929143600.49379-4-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
CONFIG_MEMORY_HOTPLUG depends on CONFIG_SPARSEMEM, so there is no need for CONFIG_MEMORY_HOTPLUG_SPARSE anymore; adjust all instances to use CONFIG_MEMORY_HOTPLUG and remove CONFIG_MEMORY_HOTPLUG_SPARSE. Link: https://lkml.kernel.org/r/20210929143600.49379-3-david@redhat.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
-
David Hildenbrand authored
Patch series "mm/memory_hotplug: Kconfig and 32 bit cleanups". Some cleanups around CONFIG_MEMORY_HOTPLUG, including removing 32 bit leftovers of memory hotplug support. This patch (of 6): SPARSEMEM is the only possible memory model for x86-64, FLATMEM is not possible: config ARCH_FLATMEM_ENABLE def_bool y depends on X86_32 && !NUMA And X86_64_ACPI_NUMA (obviously) only supports x86-64: config X86_64_ACPI_NUMA def_bool y depends on X86_64 && NUMA && ACPI && PCI Let's just remove the CONFIG_X86_64_ACPI_NUMA dependency, as it does no longer make sense. Link: https://lkml.kernel.org/r/20210929143600.49379-2-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
Commit e83a437f ("mm/memory_hotplug: introduce "auto-movable" online policy") introduced a new memory online policy to automatically select a zone for memory blocks to be onlined. It added a way to set the active online policy and tunables for the auto-movable online policy. Follow-up commits tweaked the "auto-movable" policy to also consider memory device details when selecting zones for memory blocks to be onlined. Let's document the new toggles and how the two online policies we have work. [david@redhat.com: updates] Link: https://lkml.kernel.org/r/20211011082058.6076-4-david@redhat.com Link: https://lkml.kernel.org/r/20210930144117.23641-4-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
We accidentially added a superfluous "s". Link: https://lkml.kernel.org/r/20210930144117.23641-3-david@redhat.com Fixes: ac3332c4 ("memory-hotplug.rst: complete admin-guide overhaul") Signed-off-by:
-
David Hildenbrand authored
Patch series "memory-hotplug.rst: document the "auto-movable" online policy". Now that the memory-hotplug.rst overhaul is upstream, proper documentation for the "auto-movable" online policy, documenting all new toggles and options. Along, two fixes for the original overhaul. This patch (of 3): We really want to refer to the "movable_node" kernel command line parameter here. Link: https://lkml.kernel.org/r/20210930144117.23641-2-david@redhat.com Fixes: ac3332c4 ("memory-hotplug.rst: complete admin-guide overhaul") Signed-off-by:
-
Tang Yizhou authored
online_policy_to_str is only used in memory_hotplug.c and should be defined as static. Link: https://lkml.kernel.org/r/20210913024534.26161-1-tangyizhou@huawei.comSigned-off-by:
Tang Yizhou <tangyizhou@huawei.com> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Reviewed-by:
-
David Hildenbrand authored
The madv_populate selftest currently builds with a warning when the local installed headers (via the distribution) don't include MADV_POPULATE_READ and MADV_POPULATE_WRITE. The warning is correct, because the test cannot locate the necessary header. The reason is that the in-tree installed headers (usr/include) have a "linux" instead of a "sys" subdirectory. Including "linux/mman.h" instead of "sys/mman.h" doesn't work (e.g., mmap() and madvise() are not defined that way). The only thing that seems to work is including "linux/mman.h" in addition to "sys/mman.h". We can get rid of our availability check and simplify. Link: https://lkml.kernel.org/r/20211015165758.41374-1-david@redhat.comSigned-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Lin Feng authored
fragmentation_index may return -1000 and the corresponding formated value showed by seq_printf will take a negative signatrue, but other positive formated values don't take a positive signatrue, so the output becomes unaligned. before: Node 0, zone DMA -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 Node 0, zone DMA32 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 Node 0, zone Normal -1.000 -1.000 -1.000 -1.000 0.931 0.966 0.983 0.992 0.996 0.998 0.999 after this patch: Node 0, zone DMA -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 Node 0, zone DMA32 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 Node 0, zone Normal -1.000 -1.000 -1.000 -1.000 0.931 0.966 0.983 0.992 0.996 0.998 0.999 Link: https://lkml.kernel.org/r/20211019103241.134797-1-linf@wangsu.comSigned-off-by:
Lin Feng <linf@wangsu.com> Signed-off-by:
-
Liu Shixin authored
KCSAN reports a data-race on v5.10 which also exists on mainline: BUG: KCSAN: data-race in extfrag_for_order+0x33/0x2d0 race at unknown origin, with read to 0xffff9ee9bfffab48 of 8 bytes by task 34 on cpu 1: extfrag_for_order+0x33/0x2d0 kcompactd+0x5f0/0xce0 kthread+0x1f9/0x220 ret_from_fork+0x22/0x30 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 34 Comm: kcompactd0 Not tainted 5.10.0+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Access to zone->free_area[order].nr_free in extfrag_for_order() and frag_show_print() is lockless. That's intentional and the stats are a rough estimate anyway. Annotate them with data_race(). [liushixin2@huawei.com: add comments] Link: https://lkml.kernel.org/r/20210918084655.2696522-1-liushixin2@huawei.com Link: https://lkml.kernel.org/r/20210908015606.3999871-1-liushixin2@huawei.comSigned-off-by:
Liu Shixin <liushixin2@huawei.com> Cc: "Paul E . McKenney" <paulmck@kernel.org> Signed-off-by:
-
Pedro Demarchi Gomes authored
Add test case of KSM merging time using mostly huge pages Link: https://lkml.kernel.org/r/20211013044045.360251-1-pedrodemargomes@gmail.comSigned-off-by:
Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Signed-off-by:
-
Aneesh Kumar K.V authored
Platforms can have non-contiguous NUMA nodes like below #numactl -H available: 2 nodes (0,8) ..... node distances: node 0 8 0: 10 40 8: 40 10 #numactl -H available: 1 nodes (1) .... node distances: node 1 1: 10 Hence update the test to not assume the presence of Node 0 and 1 and also use numa_num_configured_nodes() instead of numa_max_node for finding whether to skip the test. Link: https://lkml.kernel.org/r/20210914141414.350759-1-aneesh.kumar@linux.ibm.com Fixes: 82e717ad ("selftests: vm: add KSM merging across nodes test") Signed-off-by:Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by:
Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Kefeng Wang authored
When nommu, the arch_get_unmapped_area() will not be called, just kill it. Link: https://lkml.kernel.org/r/20210910061906.36299-1-wangkefeng.wang@huawei.comSigned-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Lin Feng authored
In fact, formated values returned by get_init_ra_size are not that intuitive. This patch make the comments reflect its truth. Link: https://lkml.kernel.org/r/20211019104812.135602-1-linf@wangsu.comSigned-off-by:
-
Rongwei Wang authored
When truncating pagecache on file THP, the private pages of a process should not be unmapped mapping. This incorrect behavior on a dynamic shared libraries which will cause related processes to happen core dump. A simple test for a DSO (Prerequisite is the DSO mapped in file THP): int main(int argc, char *argv[]) { int fd; fd = open(argv[1], O_WRONLY); if (fd < 0) { perror("open"); } close(fd); return 0; } The test only to open a target DSO, and do nothing. But this operation will lead one or more process to happen core dump. This patch mainly to fix this bug. Link: https://lkml.kernel.org/r/20211025092134.18562-3-rongwei.wang@linux.alibaba.com Fixes: eb6ecbed ("mm, thp: relax the VM_DENYWRITE constraint on file-backed THPs") Signed-off-by:Rongwei Wang <rongwei.wang@linux.alibaba.com> Tested-by:
Xu Yu <xuyu@linux.alibaba.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Song Liu <song@kernel.org> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Collin Fijalkovich <cfijalkovich@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Rongwei Wang authored
Patch series "fix two bugs for file THP". This patch (of 2): Transparent huge page has supported read-only non-shmem files. The file- backed THP is collapsed by khugepaged and truncated when written (for shared libraries). However, there is a race when multiple writers truncate the same page cache concurrently. In that case, subpage(s) of file THP can be revealed by find_get_entry in truncate_inode_pages_range, which will trigger PageTail BUG_ON in truncate_inode_page, as follows: page:000000009e420ff2 refcount:1 mapcount:0 mapping:0000000000000000 index:0x7ff pfn:0x50c3ff head:0000000075ff816d order:9 compound_mapcount:0 compound_pincount:0 flags: 0x37fffe0000010815(locked|uptodate|lru|arch_1|head) raw: 37fffe0000000000 fffffe0013108001 dead000000000122 dead000000000400 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 head: 37fffe0000010815 fffffe001066bd48 ffff000404183c20 0000000000000000 head: 0000000000000600 0000000000000000 00000001ffffffff ffff000c0345a000 page dumped because: VM_BUG_ON_PAGE(PageTail(page)) ------------[ cut here ]------------ kernel BUG at mm/truncate.c:213! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: xfs(E) libcrc32c(E) rfkill(E) ... CPU: 14 PID: 11394 Comm: check_madvise_d Kdump: ... Hardware name: ECS, BIOS 0.0.0 02/06/2015 pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) Call trace: truncate_inode_page+0x64/0x70 truncate_inode_pages_range+0x550/0x7e4 truncate_pagecache+0x58/0x80 do_dentry_open+0x1e4/0x3c0 vfs_open+0x38/0x44 do_open+0x1f0/0x310 path_openat+0x114/0x1dc do_filp_open+0x84/0x134 do_sys_openat2+0xbc/0x164 __arm64_sys_openat+0x74/0xc0 el0_svc_common.constprop.0+0x88/0x220 do_el0_svc+0x30/0xa0 el0_svc+0x20/0x30 el0_sync_handler+0x1a4/0x1b0 el0_sync+0x180/0x1c0 Code: aa0103e0 900061e1 910ec021 9400d300 (d4210000) This patch mainly to lock filemap when one enter truncate_pagecache(), avoiding truncating the same page cache concurrently. Link: https://lkml.kernel.org/r/20211025092134.18562-1-rongwei.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/20211025092134.18562-2-rongwei.wang@linux.alibaba.com Fixes: eb6ecbed ("mm, thp: relax the VM_DENYWRITE constraint on file-backed THPs") Signed-off-by:Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by:
Song Liu <song@kernel.org> Cc: Collin Fijalkovich <cfijalkovich@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
George G. Davis authored
When executing transhuge-stress with an argument to specify the virtual memory size for testing, the ram size is reported as 0, e.g. transhuge-stress 384 thp-mmap: allocate 192 transhuge pages, using 384 MiB virtual memory and 0 MiB of ram thp-mmap: 0.184 s/loop, 0.957 ms/page, 2090.265 MiB/s 192 succeed, 0 failed This appears to be due to a thinko in commit 0085d61f ("selftests/vm/transhuge-stress: stress test for memory compaction"), where, at a guess, the intent was to base "xyz MiB of ram" on `ram` size. Here are results after using `ram` size: thp-mmap: allocate 192 transhuge pages, using 384 MiB virtual memory and 14 MiB of ram Link: https://lkml.kernel.org/r/20210825135843.29052-1-george_davis@mentor.com Fixes: 0085d61f ("selftests/vm/transhuge-stress: stress test for memory compaction") Signed-off-by:
George G. Davis <davis.george@siemens.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Eugeniu Rosca <erosca@de.adit-jv.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Yang Shi authored
The memory demotion needs to call migrate_pages() to do the jobs. And it is controlled by a knob, however, the knob doesn't depend on CONFIG_MIGRATION. The knob could be truned on even though MIGRATION is disabled, this will not cause any crash since migrate_pages() would just return -ENOSYS. But it is definitely not optimal to go through demotion path then retry regular swap every time. And it doesn't make too much sense to have the knob visible to the users when !MIGRATION. Move the related code from mempolicy.[h|c] to migrate.[h|c]. Link: https://lkml.kernel.org/r/20211015005559.246709-1-shy828301@gmail.comSigned-off-by:
Yang Shi <shy828301@gmail.com> Acked-by:
"Huang, Ying" <ying.huang@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
John Hubbard authored
In order to remove the need to manually keep three different files in synch, provide a common definition of the mapping between enum migrate_reason, and the associated strings for each enum item. 1. Use the tracing system's mapping of enums to strings, by redefining and reusing the MIGRATE_REASON and supporting macros, and using that to populate the string array in mm/debug.c. 2. Move enum migrate_reason to migrate_mode.h. This is not strictly necessary for this patch, but migrate mode and migrate reason go together, so this will slightly clarify things. Link: https://lkml.kernel.org/r/20210922041755.141817-2-jhubbard@nvidia.comSigned-off-by:
Weizhao Ouyang <o451686892@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Signed-off-by:
-
Zhenguo Yao authored
We can specify the number of hugepages to allocate at boot. But the hugepages is balanced in all nodes at present. In some scenarios, we only need hugepages in one node. For example: DPDK needs hugepages which are in the same node as NIC. If DPDK needs four hugepages of 1G size in node1 and system has 16 numa nodes we must reserve 64 hugepages on the kernel cmdline. But only four hugepages are used. The others should be free after boot. If the system memory is low(for example: 64G), it will be an impossible task. So extend the hugepages parameter to support specifying hugepages on a specific node. For example add following parameter: hugepagesz=1G hugepages=0:1,1:3 It will allocate 1 hugepage in node0 and 3 hugepages in node1. Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.comSigned-off-by:
Zhenguo Yao <yaozhenguo1@gmail.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Zhenguo Yao <yaozhenguo1@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mike Rapoport <rppt@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
Sultan Alsawaf authored
The OOM reaper alters user address space which might theoretically alter the snapshot if reaping is allowed to happen after the freezer quiescent state. To this end, the reaper kthread uses wait_event_freezable() while waiting for any work so that it cannot run while the system freezes. However, the current implementation doesn't respect the freezer because all kernel threads are created with the PF_NOFREEZE flag, so they are automatically excluded from freezing operations. This means that the OOM reaper can race with system snapshotting if it has work to do while the system is being frozen. Fix this by adding a set_freezable() call which will clear the PF_NOFREEZE flag and thus make the OOM reaper visible to the freezer. Please note that the OOM reaper altering the snapshot this way is mostly a theoretical concern and has not been observed in practice. Link: https://lkml.kernel.org/r/20210921165758.6154-1-sultan@kerneltoast.com Link: https://lkml.kernel.org/r/20210918233920.9174-1-sultan@kerneltoast.com Fixes: aac45363 ("mm, oom: introduce oom reaper") Signed-off-by:
Sultan Alsawaf <sultan@kerneltoast.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Mike Rapoport authored
Rename memblock_free_ptr() to memblock_free() and use memblock_free() when freeing a virtual pointer so that memblock_free() will be a counterpart of memblock_alloc() The callers are updated with the below semantic patch and manual addition of (void *) casting to pointers that are represented by unsigned long variables. @@ identifier vaddr; expression size; @@ ( - memblock_phys_free(__pa(vaddr), size); + memblock_free(vaddr, size); | - memblock_free_ptr(vaddr, size); + memblock_free(vaddr, size); ) [sfr@canb.auug.org.au: fixup] Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.orgSigned-off-by:Stephen Rothwell <sfr@canb.auug.org.au> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Juergen Gross <jgross@suse.com> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com> Signed-off-by:
-
Mike Rapoport authored
Since memblock_free() operates on a physical range, make its name reflect it and rename it to memblock_phys_free(), so it will be a logical counterpart to memblock_phys_alloc(). The callers are updated with the below semantic patch: @@ expression addr; expression size; @@ - memblock_free(addr, size); + memblock_phys_free(addr, size); Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.orgSigned-off-by: -
Mike Rapoport authored
memblock_free_late() is a NOP wrapper for __memblock_free_late(), there is no point to keep this indirection. Drop the wrapper and rename __memblock_free_late() to memblock_free_late(). Link: https://lkml.kernel.org/r/20210930185031.18648-5-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport authored
memblock_free_early_nid() is unused and memblock_free_early() is an alias for memblock_free(). Replace calls to memblock_free_early() with calls to memblock_free() and remove memblock_free_early() and memblock_free_early_nid(). Link: https://lkml.kernel.org/r/20210930185031.18648-4-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport authored
free_p2m_page() wrongly passes a virtual pointer to memblock_free() that treats it as a physical address. Call memblock_free_ptr() instead that gets a virtual address to free the memory. Link: https://lkml.kernel.org/r/20210930185031.18648-3-rppt@kernel.orgSigned-off-by:
Juergen Gross <jgross@suse.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com> Signed-off-by:
-
Mike Rapoport authored
Patch series "memblock: cleanup memblock_free interface", v2. This is the fix for memblock freeing APIs mismatch [1]. The first patch is a cleanup of numa_distance allocation in arch_numa I've spotted during the conversion. The second patch is a fix for Xen memory freeing on some of the error paths. [1] https://lore.kernel.org/all/CAHk-=wj9k4LZTz+svCxLYs5Y1=+yKrbAUArH1+ghyG3OLd8VVg@mail.gmail.com This patch (of 6): Memory allocation of numa_distance uses memblock_phys_alloc_range() without actual range limits, converts the returned physical address to virtual and then only uses the virtual address for further initialization. Simplify this by replacing memblock_phys_alloc_range() with memblock_alloc(). Link: https://lkml.kernel.org/r/20210930185031.18648-1-rppt@kernel.org Link: https://lkml.kernel.org/r/20210930185031.18648-2-rppt@kernel.orgSigned-off-by:
-
Naoya Horiguchi authored
In page list mode (with -l and -L option), virtual address and physical address are printed in hexadecimal, but file offset is not, which is confusing, so let's align it. Link: https://lkml.kernel.org/r/20211004061325.1525902-4-naoya.horiguchi@linux.devSigned-off-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Bin Wang <wangbin224@huawei.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Christian Hansen <chansen3@cisco.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by:
-
Naoya Horiguchi authored
Currently file info from show_file() is printed out within page list like below, but this is inconvenient a little to utilize the page list from other scripts (maybe needs additional filtering). $ ./page-types -f page-types.c -l foffset offset len flags page-types.c Inode: 15108680 Size: 30953 (8 pages) Modify: Sat Oct 2 23:11:20 2021 (2399 seconds ago) Access: Sat Oct 2 23:11:28 2021 (2391 seconds ago) 0 d9f59e 1 ___U_lA____________________________________ 1 1031eb5 1 __RU_l_____________________________________ 2 13bf717 1 __RU_l_____________________________________ 3 13ac333 1 ___U_lA____________________________________ 4 d9f59f 1 __RU_l_____________________________________ 5 183fd49 1 ___U_lA____________________________________ 6 13cbf69 1 ___U_lA____________________________________ 7 d9ef05 1 ___U_lA____________________________________ flags page-count MB symbolic-flags long-symbolic-flags 0x000000000000002c 3 0 __RU_l_____________________________________ referenced,uptodate,lru 0x0000000000000068 5 0 ___U_lA____________________________________ uptodate,lru,active total 8 0 With this patch file info is printed out in summary part like below: $ ./page-types -f page-types.c -l foffset offset len flags 0 d9f59e 1 ___U_lA_____________________________________ 1 1031eb5 1 __RU_l______________________________________ 2 13bf717 1 __RU_l______________________________________ 3 13ac333 1 ___U_lA_____________________________________ 4 d9f59f 1 __RU_l______________________________________ 5 183fd49 1 ___U_lA_____________________________________ 6 13cbf69 1 ___U_lA_____________________________________ page-types.c Inode: 15108680 Size: 30953 (8 pages) Modify: Sat Oct 2 23:11:20 2021 (2435 seconds ago) Access: Sat Oct 2 23:11:28 2021 (2427 seconds ago) flags page-count MB symbolic-flags long-symbolic-flags 0x000000000000002c 3 0 __RU_l______________________________________ referenced,uptodate,lru 0x0000000000000068 4 0 ___U_lA_____________________________________ uptodate,lru,active total 7 0 Link: https://lkml.kernel.org/r/20211004061325.1525902-3-naoya.horiguchi@linux.devSigned-off-by:
-
