- 18 Aug, 2021 2 commits
-
-
Nathan Chancellor authored
When CONFIG_PM is not set, there is an unused function warning: sound/pci/hda/patch_analog.c:115:13: warning: unused function 'ad198x_shutup' [-Wunused-function] static void ad198x_shutup(struct hda_codec *codec) ^ 1 warning generated. Sink ad198x_shutup() into ad198x_suspend(), as it is only called in that one space. Move the CONFIG_PM guards above ad198x_power_eapd_write() as it is only called in ad198x_power_eapd(), which is in turn only called in ad198x_power_eapd(). Those two functions are large enough that they are left alone. Fixes: 327b34f2 ("ALSA: hda: Nuke unused reboot_notify callback") Signed-off-by:Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20210818012705.311963-2-nathan@kernel.orgSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Nathan Chancellor authored
When CONFIG_PM is not set, there is an unused function warning: sound/pci/hda/patch_sigmatel.c:4383:13: warning: unused function 'stac_shutup' [-Wunused-function] static void stac_shutup(struct hda_codec *codec) ^ 1 warning generated. Sink the contents of stac_shutup() into stac_suspend() since stac_shutup() is only called in that one location now. Fixes: 327b34f2 ("ALSA: hda: Nuke unused reboot_notify callback") Signed-off-by:
-
- 17 Aug, 2021 4 commits
-
-
Takashi Iwai authored
The commit 0165c4e1 ("ALSA: hda: Fix hang during shutdown due to link reset") modified the shutdown callback of the HD-audio controller for working around a hang. Meanwhile, the actual culprit of the hang was identified to be the leftover active codecs that may interfere with the powered down controller somehow, but we took a minimal fix approach for 5.14, and that was the commit above. Now, since the codec drivers go runtime-suspend at shutdown for 5.15, we can revert the change and make sure that the full runtime-suspend is performed at shutdown of HD-audio controller again. This patch essentially reverts the commit above to restore the behavior. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045 Link: https://lore.kernel.org/r/20210817075630.7115-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
-
Takashi Iwai authored
ASUS B23E requires the same workaround like other machines with VT1802, otherwise it looses the codec power on a few nodes and the sound kept silence. Fixes: a0645daf ("ALSA: HDA: Early Forbid of runtime PM") Link: https://lore.kernel.org/r/ac2232f142efcd67fe6ac38897f704f7176bd200.camel@gmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210817052432.14751-1-tiwai@suse.deSigned-off-by:
-
Imre Deak authored
During system shutdown codecs may be still active, and resetting the controller->codec HW link in this state - based on the bug reporter's tests - leads to the shutdown sequence to get stuck. This happens at least on the reporter's KBL system with an ALC662 codec. For now fix the issue by skipping the link reset step. Fixes: 472e18f6 ("ALSA: hda: Release controller display power during shutdown/reboot") References: https://bugzilla.kernel.org/show_bug.cgi?id=214045 References: https://gitlab.freedesktop.org/drm/intel/-/issues/3618#note_1024665 Reported-and-tested-by: youling257@gmail.com Cc: youling257@gmail.com Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20210816174259.2759103-1-imre.deak@intel.comSigned-off-by:
-
- 15 Aug, 2021 1 commit
-
-
Kristin Paget authored
The 2021-model XPS 15 appears to use the same 4-speakers-on-ALC289 audio setup as the Precision models, so requires the same quirk to enable woofer output. Tested on my own 9510. Signed-off-by:
Kristin Paget <kristin@tombom.co.uk> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/e1fc95c5-c10a-1f98-a5c2-dd6e336157e1@tombom.co.ukSigned-off-by:
-
- 14 Aug, 2021 5 commits
-
-
Takashi Iwai authored
As reboot_notify callback is no longer used by the codec core, let's get rid of the unused code. Conexant codec needs a slight code change as it used to call the reboot_notify at the codec removal, too. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045 Link: https://lore.kernel.org/r/20210813081230.4268-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
So far we have a few workarounds at shutdown for each codec, e.g. turning off the display power and setting the codec to D3. But all those are basically a part of the suspend procedure. Moreover, the streams are still active after that call, hence it might hit the update on the codec that has been already put to D3. In this patch, instead of calling each reboot_notify callback, simply put the codec into the runtime-suspended state after the manual suspend of all PCM streams. It makes the code and the behavior more consistent. The reboot_notify callback is no longer used after this patch, and will be cleaned up later. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045 Link: https://lore.kernel.org/r/20210813081230.4268-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Conexant codecs have a workaround for the noise at shutdown to turn off EAPD, but it wasn't applied at suspend. In the later patch, we'll switch from reboot_notify callback to the general suspend-at-shutdown, so let's apply the workaround to the suspend case, too. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045 Link: https://lore.kernel.org/r/20210813081230.4268-2-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
ALSA PCM core has an optimized way to communicate with user-space for its control and status data via mmap on the supported architectures like x86. Depending on the situation, however, we'd rather want to enforce user-space notifying the applptr or hwptr change explicitly via ioctl. For example, the upcoming non-contig and non-coherent buffer handling would need an explicit sync, and this needs to catch the applptr and hwptr changes. Also, ASoC SOF driver will have the SPIB support that has the similar requirement for the explicit control of the applptr and hwptr. This patch adds the new PCM hardware info flag, SNDRV_PCM_INFO_EXPLICIT_SYNC. When this flag is set, PCM core disables both the control and the status mmap, which enforces user-space to update via SYNC_PTR ioctl. In that way, drivers can catch the applptr and hwptr update and apply the sync operation if needed. Link: https://lore.kernel.org/r/20210812113818.6479-1-tiwai@suse.de Link: https://lore.kernel.org/r/20210610205326.1176400-1-pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20210813082142.5375-1-tiwai@suse.deSigned-off-by:
-
Damien Zammit authored
This adds a second mixer control to Digidesign Mbox to select between Analog/SPDIF capture. Users will note that selecting the SPDIF input source automatically switches the clock mode to sync to SPDIF, which is a feature of the hardware. (You can change the clock source back to internal if you want to capture from spdif but not sync to its clock although this mode is probably not recommended). Unfortunately, starting the stream resets both modes to Internally clocked and Analog input mode. Signed-off-by:
Damien Zammit <damien@zamaudio.com> Tested-by:
-
- 13 Aug, 2021 4 commits
-
-
Takashi Iwai authored
This is an enhancement for the SG-style page handling in vmalloc buffer handler to calculate the continuous pages. When snd_sgbuf_get_chunk_size() is called for a vmalloc buffer, currently we return only the size that fits into a single page. However, this API call is rather supposed for obtaining the continuous pages and most of vmalloc or noncontig buffers do have lots of continuous pages indeed. So, in this patch, the callback now calculates the possibly continuous pages up to the given size limit. Note that the end address in the function is calculated from the last byte, hence it's one byte shorter. This is because ofs + size can be above the actual buffer size boundary. Until now, this feature isn't really used, but it'll become useful in a later patch that adds the non-contiguous buffer type that shares the same callback function as vmalloc. Link: https://lore.kernel.org/r/20210812113818.6479-1-tiwai@suse.de Link: https://lore.kernel.org/r/20210813081645.4680-1-tiwai@suse.deSigned-off-by:
-
Stefan Binding authored
Some of the register values set for type detection cause pops during suspend, ensure these are cleaned up after type detection completes, as well ensuring that these are cleared when we suspend. Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by:
Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210812183433.6330-1-vitalyr@opensource.cirrus.comSigned-off-by:
-
Pierre-Louis Bossart authored
Add missing @ Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210812225904.171529-3-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
strlcpy is deprecated, use its safe replacement Signed-off-by:
Bard Liao <bard.liao@intel.com> Reviewed-by:
Paul Olaru <paul.olaru@oss.nxp.com> Reviewed-by:
-
- 12 Aug, 2021 24 commits
-
-
Stefan Binding authored
Codec is muted on init, and then unmuted when the stream starts. Signed-off-by:
-
Stefan Binding authored
Signed-off-by:
-
Stefan Binding authored
Since delays when starting jack detection after initialization have been reduced/removed, it is necessary to add back in an extra 20ms delay after the init sequence to allow the CS42L42 to power up correctly. Signed-off-by:
-
Stefan Binding authored
Signed-off-by:
-
Stefan Binding authored
CS42L42 is configured to use a fixed sample rate of 48kHz. Signed-off-by:
-
Stefan Binding authored
Headphones codec will keep reduced maximum volume. Line Out codec will have increased maximum volume. Signed-off-by:
-
Lucas Tanure authored
Dolphin devices have CS8409 HDA Bridge connected to two CS42L42 codecs. Codec 1 supports Headphone and Headset Mic. Codec 2 supports Line Out. Features: - Front and Read Jacks appear as separate jacks; Removal or connection of on jack should not affect the connection of the other. - Front Jack only shows up on jack detection. - Rear Jack is Phantom Jack. - Separate Volume Controls for each Jack Signed-off-by:
Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by:
-
Stefan Binding authored
Some hardware configurations do not support jack type detection. Instead, for those configurations, only tip detection is supported. Signed-off-by:
-
Stefan Binding authored
Signed-off-by:
-
Lucas Tanure authored
To accommodate move, cs42l42_resume has been added to mirror the existing function cs42l42_suspend. Function cs42l42_reset is no longer required, since cs42l42_resume and cs42l42_suspend perform the same operations. Signed-off-by:
-
Lucas Tanure authored
Signed-off-by:
-
Lucas Tanure authored
This allows mutex locks to be moved into i2c functions, as the bulk read/write functions can lock/unlock themselves to prevent interruption of sequence reads/writes. Signed-off-by:
-
Lucas Tanure authored
Signed-off-by:
-
Lucas Tanure authored
Signed-off-by:
-
Lucas Tanure authored
Only disable I2C clock 25 ms after not being used. The current implementation enables and disables the I2C clock for each I2C transaction. Each enable/disable call requires two verb transactions. This means each I2C transaction requires a total of four verb transactions to enable and disable the clock. However, if there are multiple consecutive I2C transactions, it is not necessary to enable and disable the clock each time, instead it is more efficient to enable the clock for the first transaction, and disable it after the final transaction, which would improve performance. This is achieved by using a timeout which disables the clock if no request to enable the clock has occurred for 25 ms. Signed-off-by:
-
Lucas Tanure authored
Use amp offsets as indexes for saved volumes. Remove dependencies on NID inside volume control functions. Signed-off-by:
-
Lucas Tanure authored
Signed-off-by:
-
Stefan Binding authored
Cleanup interrupt masks. Remove unnecessary read/writes. Ensure Tip Sense/Type Detection interrupts are enabled/disabled when needed. Signed-off-by:
-
Stefan Binding authored
Wake events are not needed for jack detect. Signed-off-by:
-
Lucas Tanure authored
The subsequence suspend and remuse have their enable/disable unsolicited responses at the correct place already Signed-off-by:
-
Stefan Binding authored
Ensure unsolicited responses cannot occur whilst the sub codecs are being disabled. Signed-off-by:
-
Stefan Binding authored
Also remove unnecessary repeated register writes. Signed-off-by:
-
Stefan Binding authored
Enable HSBIAS_SENSE_EN for Cyborg during jack detect to reduce pops and clicks. Do not enable this for Warlock/Bullseye, as it causes ESD issues. Signed-off-by:
-
Stefan Binding authored
Signed-off-by:
-
