Implement worker_{set|clr}_flags() to manipulate worker flags.  These
are currently simple wrappers but logics to track the current worker
state and the current level of concurrency will be added.
Signed-off-by: Tejun Heo <tj@kernel.org>

Use gcwq->worklist instead of cwq->worklist and break the strict
association between a cwq and its worker.  All works queued on a cpu
are queued on gcwq->worklist and processed by any available worker on
the gcwq.

As there no longer is strict association between a cwq and its worker,
whether a work is executing can now only be determined by calling
[__]find_worker_executing_work().

After this change, the only association between a cwq and its worker
is that a cwq puts a worker into shared worker pool on creation and
kills it on destruction.  As all workqueues are still limited to
max_active of one, this means that there are always at least as many
workers as active works and thus there's no danger for deadlock.

The break of strong association between cwqs and workers requires
somewhat clumsy changes to current_is_keventd() and
destroy_workqueue().  Dynamic worker pool management will remove both
clumsy changes.  current_is_keventd() won't be necessary at all as the
only reason it exists is to avoid queueing a work from a work which
will be allowed just fine.  The clumsy part of destroy_workqueue() is
added because a worker can only be destroyed while idle and there's no
guarantee a worker is idle when its wq is going down.  With dynamic
pool management, workers are not associated with workqueues at all and
only idle ones will be submitted to destroy_workqueue() so the code
won't be necessary anymore.
Signed-off-by: Tejun Heo <tj@kernel.org>

With gcwq managing all the workers and work->data pointing to the last
gcwq it was on, non-reentrance can be easily implemented by checking
whether the work is still running on the previous gcwq on queueing.
Implement it.
Signed-off-by: Tejun Heo <tj@kernel.org>

To implement non-reentrant workqueue, the last gcwq a work was
executed on must be reliably obtainable as long as the work structure
is valid even if the previous workqueue has been destroyed.

To achieve this, work->data will be overloaded to carry the last cpu
number once execution starts so that the previous gcwq can be located
reliably.  This means that cwq can't be obtained from work after
execution starts but only gcwq.

Implement set_work_{cwq|cpu}(), get_work_[g]cwq() and
clear_work_data() to set work data to the cpu number when starting
execution, access the overloaded work data and clear it after
cancellation.

queue_delayed_work_on() is updated to preserve the last cpu while
in-flight in timer and other callers which depended on getting cwq
from work after execution starts are converted to depend on gcwq
instead.

* Anton Blanchard fixed compile error on powerpc due to missing
  linux/threads.h include.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Anton Blanchard <anton@samba.org>

Now that all the workers are tracked by gcwq, we can find which worker
is executing a work from gcwq.  Implement find_worker_executing_work()
and make worker track its current_cwq so that we can find things the
other way around.  This will be used to implement non-reentrant wqs.
Signed-off-by: Tejun Heo <tj@kernel.org>

Reimplement st (single thread) workqueue so that it's friendly to
shared worker pool.  It was originally implemented by confining st
workqueues to use cwq of a fixed cpu and always having a worker for
the cpu.  This implementation isn't very friendly to shared worker
pool and suboptimal in that it ends up crossing cpu boundaries often.

Reimplement st workqueue using dynamic single cpu binding and
cwq->limit.  WQ_SINGLE_THREAD is replaced with WQ_SINGLE_CPU.  In a
single cpu workqueue, at most single cwq is bound to the wq at any
given time.  Arbitration is done using atomic accesses to
wq->single_cpu when queueing a work.  Once bound, the binding stays
till the workqueue is drained.

Note that the binding is never broken while a workqueue is frozen.
This is because idle cwqs may have works waiting in delayed_works
queue while frozen.  On thaw, the cwq is restarted if there are any
delayed works or unbound otherwise.

When combined with max_active limit of 1, single cpu workqueue has
exactly the same execution properties as the original single thread
workqueue while allowing sharing of per-cpu workers.
Signed-off-by: Tejun Heo <tj@kernel.org>

Reimplement CPU hotplugging support using trustee thread.  On CPU
down, a trustee thread is created and each step of CPU down is
executed by the trustee and workqueue_cpu_callback() simply drives and
waits for trustee state transitions.

CPU down operation no longer waits for works to be drained but trustee
sticks around till all pending works have been completed.  If CPU is
brought back up while works are still draining,
workqueue_cpu_callback() tells trustee to step down and tell workers
to rebind to the cpu.

As it's difficult to tell whether cwqs are empty if it's freezing or
frozen, trustee doesn't consider draining to be complete while a gcwq
is freezing or frozen (tracked by new GCWQ_FREEZING flag).  Also,
workers which get unbound from their cpu are marked with WORKER_ROGUE.

Trustee based implementation doesn't bring any new feature at this
point but it will be used to manage worker pool when dynamic shared
worker pool is implemented.
Signed-off-by: Tejun Heo <tj@kernel.org>

Implement worker states.  After created, a worker is STARTED.  While a
worker isn't processing a work, it's IDLE and chained on
gcwq->idle_list.  While processing a work, a worker is BUSY and
chained on gcwq->busy_hash.  Also, gcwq now counts the number of all
workers and idle ones.

worker_thread() is restructured to reflect state transitions.
cwq->more_work is removed and waking up a worker makes it check for
events.  A worker is killed by setting DIE flag while it's IDLE and
waking it up.

This gives gcwq better visibility of what's going on and allows it to
find out whether a work is executing quickly which is necessary to
have multiple workers processing the same cwq.
Signed-off-by: Tejun Heo <tj@kernel.org>

There is one gcwq (global cwq) per each cpu and all cwqs on an cpu
point to it.  A gcwq contains a lock to be used by all cwqs on the cpu
and an ida to give IDs to workers belonging to the cpu.

This patch introduces gcwq, moves worker_ida into gcwq and make all
cwqs on the same cpu use the cpu's gcwq->lock instead of separate
locks.  gcwq->ida is now protected by gcwq->lock too.
Signed-off-by: Tejun Heo <tj@kernel.org>

Currently, workqueue freezing is implemented by marking the worker
freezeable and calling try_to_freeze() from dispatch loop.
Reimplement it using cwq->limit so that the workqueue is frozen
instead of the worker.

* workqueue_struct->saved_max_active is added which stores the
  specified max_active on initialization.

* On freeze, all cwq->max_active's are quenched to zero.  Freezing is
  complete when nr_active on all cwqs reach zero.

* On thaw, all cwq->max_active's are restored to wq->saved_max_active
  and the worklist is repopulated.

This new implementation allows having single shared pool of workers
per cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>

Add cwq->nr_active, cwq->max_active and cwq->delayed_work.  nr_active
counts the number of active works per cwq.  A work is active if it's
flushable (colored) and is on cwq's worklist.  If nr_active reaches
max_active, new works are queued on cwq->delayed_work and activated
later as works on the cwq complete and decrement nr_active.

cwq->max_active can be specified via the new @max_active parameter to
__create_workqueue() and is set to 1 for all workqueues for now.  As
each cwq has only single worker now, this double queueing doesn't
cause any behavior difference visible to its users.

This will be used to reimplement freeze/thaw and implement shared
worker pool.
Signed-off-by: Tejun Heo <tj@kernel.org>

A work is linked to the next one by having WORK_STRUCT_LINKED bit set
and these links can be chained.  When a linked work is dispatched to a
worker, all linked works are dispatched to the worker's newly added
->scheduled queue and processed back-to-back.

Currently, as there's only single worker per cwq, having linked works
doesn't make any visible behavior difference.  This change is to
prepare for multiple shared workers per cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>

Separate out worker thread related information to struct worker from
struct cpu_workqueue_struct and implement helper functions to deal
with the new struct worker.  The only change which is visible outside
is that now workqueue worker are all named "kworker/CPUID:WORKERID"
where WORKERID is allocated from per-cpu ida.

This is in preparation of concurrency managed workqueue where shared
multiple workers would be available per cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>

Reimplement workqueue flushing using color coded works.  wq has the
current work color which is painted on the works being issued via
cwqs.  Flushing a workqueue is achieved by advancing the current work
colors of cwqs and waiting for all the works which have any of the
previous colors to drain.

Currently there are 16 possible colors, one is reserved for no color
and 15 colors are useable allowing 14 concurrent flushes.  When color
space gets full, flush attempts are batched up and processed together
when color frees up, so even with many concurrent flushers, the new
implementation won't build up huge queue of flushers which has to be
processed one after another.

Only works which are queued via __queue_work() are colored.  Works
which are directly put on queue using insert_work() use NO_COLOR and
don't participate in workqueue flushing.  Currently only works used
for work-specific flush fall in this category.

This new implementation leaves only cleanup_workqueue_thread() as the
user of flush_cpu_workqueue().  Just make its users use
flush_workqueue() and kthread_stop() directly and kill
cleanup_workqueue_thread().  As workqueue flushing doesn't use barrier
request anymore, the comment describing the complex synchronization
around it in cleanup_workqueue_thread() is removed together with the
function.

This new implementation is to allow having and sharing multiple
workers per cpu.

Please note that one more bit is reserved for a future work flag by
this patch.  This is to avoid shifting bits and updating comments
later.
Signed-off-by: Tejun Heo <tj@kernel.org>

work->data field is used for two purposes.  It points to cwq it's
queued on and the lower bits are used for flags.  Currently, two bits
are reserved which is always safe as 4 byte alignment is guaranteed on
every architecture.  However, future changes will need more flag bits.

On SMP, the percpu allocator is capable of honoring larger alignment
(there are other users which depend on it) and larger alignment works
just fine.  On UP, percpu allocator is a thin wrapper around
kzalloc/kfree() and don't honor alignment request.

This patch introduces WORK_STRUCT_FLAG_BITS and implements
alloc/free_cwqs() which guarantees max(1 << WORK_STRUCT_FLAG_BITS,
__alignof__(unsigned long long) alignment both on SMP and UP.  On SMP,
simply wrapping percpu allocator is enough.  On UP, extra space is
allocated so that cwq can be aligned and the original pointer can be
stored after it which is used in the free path.

* Alignment problem on UP is reported by Michal Simek.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Reported-by: Michal Simek <michal.simek@petalogix.com>

Worker management is about to be overhauled.  Simplify things by
removing cpu_populated_map, creating workers for all possible cpus and
making single threaded workqueues behave more like multi threaded
ones.

After this patch, all cwqs are always initialized, all workqueues are
linked on the workqueues list and workers for all possibles cpus
always exist.  This also makes CPU hotplug support simpler - checking
->cpus_allowed before processing works in worker_thread() and flushing
cwqs on CPU_POST_DEAD are enough.

While at it, make get_cwq() always return the cwq for the specified
cpu, add target_cwq() for cases where single thread distinction is
necessary and drop all direct usage of per_cpu_ptr() on wq->cpu_wq.
Signed-off-by: Tejun Heo <tj@kernel.org>

Strip tracing code from workqueue and remove workqueue tracing.  This
is temporary measure till concurrency managed workqueue is complete.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>

Separate out process_one_work() out of run_workqueue().  This patch
doesn't cause any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>

Work flags are about to see more traditional mask handling.  Define
WORK_STRUCT_*_BIT as the bit position constant and redefine
WORK_STRUCT_* as bit masks.  Also, make WORK_STRUCT_STATIC_* flags
conditional

While at it, re-define these constants as enums and use
WORK_STRUCT_STATIC instead of hard-coding 2 in
WORK_DATA_STATIC_INIT().
Signed-off-by: Tejun Heo <tj@kernel.org>

Currently, __create_workqueue_key() takes @singlethread and
@freezeable paramters and store them separately in workqueue_struct.
Merge them into a single flags parameter and field and use
WQ_FREEZEABLE and WQ_SINGLE_THREAD.
Signed-off-by: Tejun Heo <tj@kernel.org>

Make the following updates in preparation of concurrency managed
workqueue.  None of these changes causes any visible behavior
difference.

* Add comments and adjust indentations to data structures and several
  functions.

* Rename wq_per_cpu() to get_cwq() and swap the position of two
  parameters for consistency.  Convert a direct per_cpu_ptr() access
  to wq->cpu_wq to get_cwq().

* Add work_static() and Update set_wq_data() such that it sets the
  flags part to WORK_STRUCT_PENDING | WORK_STRUCT_STATIC if static |
  @extra_flags.

* Move santiy check on work->entry emptiness from queue_work_on() to
  __queue_work() which all queueing paths share.

* Make __queue_work() take @cpu and @wq instead of @cwq.

* Restructure flush_work() and __create_workqueue_key() to make them
  easier to modify.
Signed-off-by: Tejun Heo <tj@kernel.org>

With stop_machine() converted to use cpu_stop, RT workqueue doesn't
have any user left.  Kill RT workqueue support.
Signed-off-by: Tejun Heo <tj@kernel.org>

ACPI works need to be executed on cpu0 and acpi/osl.c achieves this by
creating singlethread workqueue and then binding it to cpu0 from a
work which is quite unorthodox.  Make it create regular workqueues and
use queue_work_on() instead.  This is in preparation of concurrency
managed workqueue and the extra workers won't be a problem after it's
implemented.
Signed-off-by: Tejun Heo <tj@kernel.org>

Implement kthread_data() which takes @task pointing to a kthread and
returns @data specified when creating the kthread.  The caller is
responsible for ensuring the validity of @task when calling this
function.
Signed-off-by: Tejun Heo <tj@kernel.org>

Upcoming workqueue updates will no longer guarantee fixed workqueue to
worker kthread association, so giving RT priority to the irq worker
won't work.  Use kthread_worker which guarantees specific kthread
association instead.  This also makes setting the priority cleaner.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: ivtv-devel@ivtvdriver.org
Cc: linux-media@vger.kernel.org

Implement simple work processor for kthread.  This is to ease using
kthread.  Single thread workqueue used to be used for things like this
but workqueue won't guarantee fixed kthread association anymore to
enable worker sharing.

This can be used in cases where specific kthread association is
necessary, for example, when it should have RT priority or be assigned
to certain cgroup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  wimax/i2400m: fix missing endian correction read in fw loader
  net8139: fix a race at the end of NAPI
  pktgen: Fix accuracy of inter-packet delay.
  pkt_sched: gen_estimator: add a new lock
  net: deliver skbs on inactive slaves to exact matches
  ipv6: fix ICMP6_MIB_OUTERRORS
  r8169: fix mdio_read and update mdio_write according to hw specs
  gianfar: Revive the driver for eTSEC devices (disable timestamping)
  caif: fix a couple range checks
  phylib: Add support for the LXT973 phy.
  net: Print num_rx_queues imbalance warning only when there are allocated queues

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / x86: Save/restore MISC_ENABLE register

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: The file argument for fsync() is never null
  Btrfs: handle ERR_PTR from posix_acl_from_xattr()
  Btrfs: avoid BUG when dropping root and reference in same transaction
  Btrfs: prohibit a operation of changing acl's mask when noacl mount option used
  Btrfs: should add a permission check for setfacl
  Btrfs: btrfs_lookup_dir_item() can return ERR_PTR
  Btrfs: btrfs_read_fs_root_no_name() returns ERR_PTRs
  Btrfs: unwind after btrfs_start_transaction() errors
  Btrfs: btrfs_iget() returns ERR_PTR
  Btrfs: handle kzalloc() failure in open_ctree()
  Btrfs: handle error returns from btrfs_lookup_dir_item()
  Btrfs: Fix BUG_ON for fs converted from extN
  Btrfs: Fix null dereference in relocation.c
  Btrfs: fix remap_file_pages error
  Btrfs: uninitialized data is check_path_shared()
  Btrfs: fix fallocate regression
  Btrfs: fix loop device on top of btrfs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: clear bridge resource range if BIOS assigned bad one
  PCI: hotplug/cpqphp, fix NULL dereference
  Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"
  PCI: change resource collision messages from KERN_ERR to KERN_INFO

Yannick found that video does not work with 2.6.34.  The cause of this
bug was that the BIOS had assigned the wrong range to the PCI bridge
above the video device.  Before 2.6.34 the kernel would have shrunk
the size of the bridge window, but since
  d65245c3 PCI: don't shrink bridge resources
the kernel will avoid shrinking BIOS ranges.

So zero out the old range if we fail to claim it at boot time; this will
cause us to allocate a new range at startup, restoring the 2.6.34
behavior.

Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009.
Reported-by: Yannick <yannick.roehlly@free.fr>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

There are devices out there which are PCI Hot-plug controllers with
compaq PCI IDs, but are not bridges, hence have pdev->subordinate
NULL. But cpqphp expects the pointer to be non-NULL.

Add a check to the probe function to avoid oopses like:
BUG: unable to handle kernel NULL pointer dereference at 00000050
IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp]
*pdpt = 0000000033779001 *pde = 0000000000000000
...

The device here was:
00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11)
	Subsystem: Compaq Computer Corporation Device [0e11:a2f8]
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

This reverts commit 75568f80.

Since they're just a convenience anyway, remove these symlinks since
they're causing duplicate filename errors in the wild.
Acked-by: Alex Chiang <achiang@canonical.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

We can often deal with PCI resource issues by moving devices around.  In
that case, there's no point in alarming the user with messages like these.
There are many bug reports where the message itself is the only problem,
e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 .
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

The "file" argument for fsync is never null so we can remove this check.

What drew my attention here is that 7ea80859: "drop unused dentry
argument to ->fsync" introduced an unconditional dereference at the
start of the function and that generated a smatch warning.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

posix_acl_from_xattr() returns both ERR_PTRs and null, but it's OK to
pass null values to set_cached_acl()
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

If btrfs_ioctl_snap_destroy() deletes a snapshot but finishes
with end_transaction(), the cleaner kthread may come in and
drop the root in the same transaction.  If that's the case, the
root's refs still == 1 in the tree when btrfs_del_root() deletes
the item, because commit_fs_roots() hasn't updated it yet (that
happens during the commit).

This wasn't a problem before only because
btrfs_ioctl_snap_destroy() would commit the transaction before dropping
the dentry reference, so the dead root wouldn't get queued up until
after the fs root item was updated in the btree.

Since it is not an error to drop the root reference and the root in the
same transaction, just drop the BUG_ON() in btrfs_del_root().
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

when used Posix File System Test Suite(pjd-fstest) to test btrfs,
some cases about setfacl failed when noacl mount option used.
I simplified used commands in pjd-fstest, and the following steps
can reproduce it.
------------------------
# cd btrfs-part/
# mkdir aaa
# setfacl -m m::rw aaa    <- successed, but not expected by pjd-fstest.
------------------------
I checked ext3, a warning message occured, like as:
  setfacl: aaa/: Operation not supported
Certainly, it's expected by pjd-fstest.

So, i compared acl.c of btrfs and ext3. Based on that, a patch created.
Fortunately, it works.
Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>