- 19 Aug, 2020 40 commits
-
-
Nicolas Boichat authored
[ Upstream commit 202798db ] We should not call hci_unregister_dev if the device was not successfully registered. Fixes: c34dc3bf ("Bluetooth: hci_serdev: Introduce hci_uart_unregister_device()") Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nicolas Boichat authored
[ Upstream commit a7ad4b61 ] HCI_UART_RESET_ON_INIT belongs in hdev_flags, not flags. Fixes: ce945552 ("Bluetooth: hci_h5: Add support for serdev enumerated devices") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Tom Rix authored
[ Upstream commit ccf193de ] clang static analysis flags this error 88pm860x_battery.c:522:19: warning: Assigned value is garbage or undefined [core.uninitialized.Assign] info->start_soc = soc; ^ ~~~ soc is set by calling calc_soc. But calc_soc can return without setting soc. So check the return status and bail similarly to other checks in pm860x_init_battery and initialize soc to silence the warning. Fixes: a830d28b ("power_supply: Enable battery-charger for 88pm860x") Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 42a2df3e ] We have an upper bound on "maplevel" but forgot to check for negative values. Fixes: e114e473 ("Smack: Simplified Mandatory Access Control Kernel") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Casey Schaufler <casey@schaufler-ca.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit a6bd4f6d ] This is similar to commit 84e99e58 ("Smack: slab-out-of-bounds in vsscanf") where we added a bounds check on "rule". Reported-by: syzbot+a22c6092d003d6fe1122@syzkaller.appspotmail.com Fixes: f7112e6c ("Smack: allow for significantly longer Smack labels v4") Signed-off-by:
-
Li Heng authored
[ Upstream commit 47fda651 ] The error codes in _ib_modify_qp() are supposed to be negative errno. Fixes: 7a5c938b ("IB/core: Check for rdma_protocol_ib only after validating port_num") Link: https://lore.kernel.org/r/1595645787-20375-1-git-send-email-liheng40@huawei.comReported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Li Heng <liheng40@huawei.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
-
Kishon Vijay Abraham I authored
[ Upstream commit e3bca37d ] Commit 1b79c528 ("PCI: cadence: Add host driver for Cadence PCIe controller") in order to update Vendor ID, directly wrote to PCI_VENDOR_ID register. However PCI_VENDOR_ID in root port configuration space is read-only register and writing to it will have no effect. Use local management register to configure Vendor ID and Subsystem Vendor ID. Link: https://lore.kernel.org/r/20200722110317.4744-10-kishon@ti.com Fixes: 1b79c528 ("PCI: cadence: Add host driver for Cadence PCIe controller") Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Chris Packham authored
[ Upstream commit 0f3c66a3 ] The MV88E6097 chip does not support configuring jumbo frames. Prior to commit 5f436666 only the 6352, 6351, 6165 and 6320 chips configured jumbo mode. The refactor accidentally added the function for the 6097. Remove the erroneous function pointer assignment. Fixes: 5f436666 ("net: dsa: mv88e6xxx: Refactor setting of jumbo frames") Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Finn Thain authored
[ Upstream commit edd7dd22 ] Booting Linux with a Conner CP3200 drive attached to the MESH SCSI bus results in EH measures and a panic: [ 25.499838] mesh: configured for synchronous 5 MB/s [ 25.787154] mesh: performing initial bus reset... [ 29.867115] scsi host0: MESH [ 29.929527] mesh: target 0 synchronous at 3.6 MB/s [ 29.998763] scsi 0:0:0:0: Direct-Access CONNER CP3200-200mb-3.5 4040 PQ: 0 ANSI: 1 CCS [ 31.989975] sd 0:0:0:0: [sda] 415872 512-byte logical blocks: (213 MB/203 MiB) [ 32.070975] sd 0:0:0:0: [sda] Write Protect is off [ 32.137197] sd 0:0:0:0: [sda] Mode Sense: 5b 00 00 08 [ 32.209661] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.332708] sda: [mac] sda1 sda2 sda3 [ 32.417733] sd 0:0:0:0: [sda] Attached SCSI disk ... snip ... [ 76.687067] mesh_abort((ptrval)) [ 76.743606] mesh: state at (ptrval), regs at (ptrval), dma at (ptrval) [ 76.810798] ct=6000 seq=86 bs=4017 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=85 [ 76.880720] dma stat=84e0 cmdptr=1f73d000 [ 76.941387] phase=4 msgphase=0 conn_tgt=0 data_ptr=24576 [ 77.005567] dma_st=1 dma_ct=0 n_msgout=0 [ 77.065456] target 0: req=(ptrval) goes_out=0 saved_ptr=0 [ 77.130512] mesh_abort((ptrval)) [ 77.187670] mesh: state at (ptrval), regs at (ptrval), dma at (ptrval) [ 77.255594] ct=6000 seq=86 bs=4017 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=85 [ 77.325778] dma stat=84e0 cmdptr=1f73d000 [ 77.387239] phase=4 msgphase=0 conn_tgt=0 data_ptr=24576 [ 77.453665] dma_st=1 dma_ct=0 n_msgout=0 [ 77.515900] target 0: req=(ptrval) goes_out=0 saved_ptr=0 [ 77.582902] mesh_host_reset [ 88.187083] Kernel panic - not syncing: mesh: double DMA start ! [ 88.254510] CPU: 0 PID: 358 Comm: scsi_eh_0 Not tainted 5.6.13-pmac #1 [ 88.323302] Call Trace: [ 88.378854] [e16ddc58] [c0027080] panic+0x13c/0x308 (unreliable) [ 88.446221] [e16ddcb8] [c02b2478] mesh_start.part.12+0x130/0x414 [ 88.513298] [e16ddcf8] [c02b2fc8] mesh_queue+0x54/0x70 [ 88.577097] [e16ddd18] [c02a1848] scsi_send_eh_cmnd+0x374/0x384 [ 88.643476] [e16dddc8] [c02a1938] scsi_eh_tur+0x5c/0xb8 [ 88.707878] [e16dddf8] [c02a1ab8] scsi_eh_test_devices+0x124/0x178 [ 88.775663] [e16dde28] [c02a2094] scsi_eh_ready_devs+0x588/0x8a8 [ 88.843124] [e16dde98] [c02a31d8] scsi_error_handler+0x344/0x520 [ 88.910697] [e16ddf08] [c00409c8] kthread+0xe4/0xe8 [ 88.975166] [e16ddf38] [c000f234] ret_from_kernel_thread+0x14/0x1c [ 89.044112] Rebooting in 180 seconds.. In theory, a panic can happen after a bus or host reset with dma_started flag set. Fix this by halting the DMA before reinitializing the host. Don't assume that ms->current_req is set when halt_dma() is invoked as it may not hold for bus or host reset. BTW, this particular Conner drive can be made to work by inhibiting disconnect/reselect with 'mesh.resel_targets=0'. Link: https://lore.kernel.org/r/3952bc691e150a7128b29120999b6092071b039a.1595460351.git.fthain@telegraphics.com.au Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: Paul Mackerras <paulus@ozlabs.org> Reported-and-tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 33a06f13 ] When gadget registration fails, one should not call usb_del_gadget_udc(). Ensure this by setting gadget->udc to NULL. Also in case of a failure there is no need to disable low-level hardware, so return immiedetly instead of jumping to error_init label. This fixes the following kernel NULL ptr dereference on gadget failure (can be easily triggered with g_mass_storage without any module parameters): dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1 dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024 dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM Mass Storage Function, version: 2009/09/11 LUN: removable file: (no medium) no file given for LUN0 g_mass_storage 12480000.hsotg: failed to start g_mass_storage: -22 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000104 pgd = (ptrval) [00000104] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.8.0-rc5 #3133 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events deferred_probe_work_func PC is at usb_del_gadget_udc+0x38/0xc4 LR is at __mutex_lock+0x31c/0xb18 ... Process kworker/0:1 (pid: 12, stack limit = 0x(ptrval)) Stack: (0xef121db0 to 0xef122000) ... [<c076bf3c>] (usb_del_gadget_udc) from [<c0726bec>] (dwc2_hsotg_remove+0x10/0x20) [<c0726bec>] (dwc2_hsotg_remove) from [<c0711208>] (dwc2_driver_probe+0x57c/0x69c) [<c0711208>] (dwc2_driver_probe) from [<c06247c0>] (platform_drv_probe+0x6c/0xa4) [<c06247c0>] (platform_drv_probe) from [<c0621df4>] (really_probe+0x200/0x48c) [<c0621df4>] (really_probe) from [<c06221e8>] (driver_probe_device+0x78/0x1fc) [<c06221e8>] (driver_probe_device) from [<c061fcd4>] (bus_for_each_drv+0x74/0xb8) [<c061fcd4>] (bus_for_each_drv) from [<c0621b54>] (__device_attach+0xd4/0x16c) [<c0621b54>] (__device_attach) from [<c0620c98>] (bus_probe_device+0x88/0x90) [<c0620c98>] (bus_probe_device) from [<c06211b0>] (deferred_probe_work_func+0x3c/0xd0) [<c06211b0>] (deferred_probe_work_func) from [<c0149280>] (process_one_work+0x234/0x7dc) [<c0149280>] (process_one_work) from [<c014986c>] (worker_thread+0x44/0x51c) [<c014986c>] (worker_thread) from [<c0150b1c>] (kthread+0x158/0x1a0) [<c0150b1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20) Exception stack(0xef121fb0 to 0xef121ff8) ... ---[ end trace 9724c2fc7cc9c982 ]--- While fixing this also fix the double call to dwc2_lowlevel_hw_disable() if dr_mode is set to USB_DR_MODE_PERIPHERAL. In such case low-level hardware is already disabled before calling usb_add_gadget_udc(). That function correctly preserves low-level hardware state, there is no need for the second unconditional dwc2_lowlevel_hw_disable() call. Fixes: 207324a3 ("usb: dwc2: Postponed gadget registration to the udc class driver") Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Yu Kuai authored
[ Upstream commit e8b9fc10 ] if of_find_device_by_node() succeed, dwc3_octeon_device_init() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: 93e502b3 ("MIPS: OCTEON: Platform support for OCTEON III USB controller") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Sai Prakash Ranjan authored
[ Upstream commit d021f5c5 ] Reading TMC mode register without proper coresight power management can lead to exceptions like the one in the call trace below in tmc_read_unprepare_etb() when the trace data is read after the sink is disabled. So fix this by having a check for coresight sysfs mode before reading TMC mode management register in tmc_read_unprepare_etb() similar to tmc_read_prepare_etb(). SError Interrupt on CPU6, code 0xbe000411 -- SError pstate: 80400089 (Nzcv daIf +PAN -UAO) pc : tmc_read_unprepare_etb+0x74/0x108 lr : tmc_read_unprepare_etb+0x54/0x108 sp : ffffff80d9507c30 x29: ffffff80d9507c30 x28: ffffff80b3569a0c x27: 0000000000000000 x26: 00000000000a0001 x25: ffffff80cbae9550 x24: 0000000000000010 x23: ffffffd07296b0f0 x22: ffffffd0109ee028 x21: 0000000000000000 x20: ffffff80d19e70e0 x19: ffffff80d19e7080 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: dfffffd000000001 x9 : 0000000000000000 x8 : 0000000000000002 x7 : ffffffd071d0fe78 x6 : 0000000000000000 x5 : 0000000000000080 x4 : 0000000000000001 x3 : ffffffd071d0fe98 x2 : 0000000000000000 x1 : 0000000000000004 x0 : 0000000000000001 Kernel panic - not syncing: Asynchronous SError Interrupt Fixes: 4525412a ("coresight: tmc: making prepare/unprepare functions generic") Reported-by:
Mike Leach <mike.leach@linaro.org> Signed-off-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Tested-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-14-mathieu.poirier@linaro.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 0f348db0 ] This condition is reversed and will cause breakage. Fixes: 7440f518 ("thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR") Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200616091949.GA11940@mwandaSigned-off-by:
-
Kars Mulder authored
[ Upstream commit b1b6bed3 ] The function quirks_param_set() takes as argument a const char* pointer to the new value of the usbcore.quirks parameter. It then casts this pointer to a non-const char* pointer and passes it to the strsep() function, which overwrites the value. Fix this by creating a copy of the value using kstrdup() and letting that copy be written to by strsep(). Fixes: 027bd6ca ("usb: core: Add "quirks" parameter for usbcore") Signed-off-by:
Kars Mulder <kerneldev@karsmulder.nl> Link: https://lore.kernel.org/r/5ee2-5f048a00-21-618c5c00@230659773Signed-off-by:
-
Johan Hovold authored
[ Upstream commit de37458f ] The set-led command is eight bytes long and starts with a command byte followed by six bytes of RGB data and ends with a byte encoding a frequency (see iuu_led() and iuu_rgbf_fill_buffer()). The led activity helpers had a few long-standing bugs which corrupted the command packets by inserting a second command byte and thereby offsetting the RGB data and dropping the frequency in non-xmas mode. In xmas mode, a related off-by-one error left the frequency field uninitialised. Fixes: 60a8fc01 ("USB: add iuu_phoenix driver") Reported-by:
George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/r/20200716085056.31471-1-johan@kernel.orgReviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Marco Felsch authored
[ Upstream commit 7bb58b98 ] Add missing regulator_disable() as devm_action to avoid dedicated unbind() callback and fix the missing error handling. Fixes: fcbc51e5 ("staging: drm/imx: Add support for Television Encoder (TVEv2)") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Aneesh Kumar K.V authored
[ Upstream commit d79e7a5f ] We are wrongly using CPU_FTRS_POWER8 to check for P8 support. Instead, we should use PVR value. Now considering we are using CPU_FTRS_POWER8, that implies we returned true for P9 with older firmware. Keep the same behavior by checking for P9 PVR value. Fixes: cf43d3b2 ("powerpc: Enable pkey subsystem") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709032946.881753-2-aneesh.kumar@linux.ibm.comSigned-off-by:
-
Xiongfeng Wang authored
[ Upstream commit 3167e3d3 ] When I cat ASPM parameter 'policy' by sysfs, it displays as follows. Add a newline for easy reading. Other sysfs attributes already include a newline. [root@localhost ~]# cat /sys/module/pcie_aspm/parameters/policy [default] performance powersave powersupersave [root@localhost ~]# Fixes: 7d715a6c ("PCI: add PCI Express ASPM support") Link: https://lore.kernel.org/r/1594972765-10404-1-git-send-email-wangxiongfeng2@huawei.comSigned-off-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit c4283950 ] Currently the masking of ret with 0xff and followed by a right shift of 8 bits always leaves a zero result. It appears the mask of 0xff is incorrect and should be 0xff00, but I don't have the hardware to test this. Fix this to mask the upper 8 bits before shifting. [ Not tested ] Addresses-Coverity: ("Operands don't affect result") Fixes: 8fc8598e ("Staging: Added Realtek rtl8192u driver to staging") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200716154720.1710252-1-colin.king@canonical.comSigned-off-by:
-
Mikhail Malygin authored
[ Upstream commit 5f0b2a60 ] rxe_post_send_kernel() iterates over linked list of wr's, until the wr->next ptr is NULL. However if we've got an interrupt after last wr is posted, control may be returned to the code after send completion callback is executed and wr memory is freed. As a result, wr->next pointer may contain incorrect value leading to panic. Store the wr->next on the stack before posting it. Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200716190340.23453-1-m.malygin@yadro.comSigned-off-by:
Mikhail Malygin <m.malygin@yadro.com> Signed-off-by:
Sergey Kojushev <s.kojushev@yadro.com> Signed-off-by:
-
Yuval Basson authored
[ Upstream commit acca72e2 ] QP's with the same SRQ, working on different CQs and running in parallel on different CPUs could lead to a race when maintaining the SRQ consumer count, and leads to FW running out of SRQs. Update the consumer atomically. Make sure the wqe_prod is updated after the sge_prod due to FW requirements. Fixes: 3491c9e7 ("qedr: Add support for kernel mode SRQ's") Link: https://lore.kernel.org/r/20200708195526.31040-1-ybason@marvell.comSigned-off-by:
Michal Kalderon <mkalderon@marvell.com> Signed-off-by:
Yuval Basson <ybason@marvell.com> Signed-off-by:
-
Milton Miller authored
[ Upstream commit a9f675f9 ] The code in vdso_cpu_init that exposes the cpu and numa node to userspace via SPRG_VDSO incorrctly masks the cpu to 12 bits. This means that any kernel running on a box with more than 4096 threads (NR_CPUS advertises a limit of of 8192 cpus) would expose userspace to two cpu contexts running at the same time with the same cpu number. Note: I'm not aware of any distro shipping a kernel with support for more than 4096 threads today, nor of any system image that currently exceeds 4096 threads. Found via code browsing. Fixes: 18ad51dd ("powerpc: Add VDSO version of getcpu") Signed-off-by:
Milton Miller <miltonm@us.ibm.com> Signed-off-by:
Anton Blanchard <anton@linux.ibm.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit e1869678 ] The length of the key comes from the network and it's a 16 bit number. It needs to be capped to prevent a buffer overflow. Fixes: 5e6e3a92 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by:
Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200708115857.GA13729@mwandaSigned-off-by:
-
John Garry authored
[ Upstream commit c87bf24c ] sdebug_max_queue should not exceed SDEBUG_CANQUEUE, otherwise crashes like this can be triggered by passing an out-of-range value: Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 pstate: 20400009 (nzCv daif +PAN -UAO BTYPE=--) pc : schedule_resp+0x2a4/0xa70 [scsi_debug] lr : schedule_resp+0x52c/0xa70 [scsi_debug] sp : ffff800022ab36f0 x29: ffff800022ab36f0 x28: ffff0023a935a610 x27: ffff800008e0a648 x26: 0000000000000003 x25: ffff0023e84f3200 x24: 00000000003d0900 x23: 0000000000000000 x22: 0000000000000000 x21: ffff0023be60a320 x20: ffff0023be60b538 x19: ffff800008e13000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000001 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 00000000000000c1 x5 : 0000020000200000 x4 : dead0000000000ff x3 : 0000000000000200 x2 : 0000000000000200 x1 : ffff800008e13d88 x0 : 0000000000000000 Call trace: schedule_resp+0x2a4/0xa70 [scsi_debug] scsi_debug_queuecommand+0x2c4/0x9e0 [scsi_debug] scsi_queue_rq+0x698/0x840 __blk_mq_try_issue_directly+0x108/0x228 blk_mq_request_issue_directly+0x58/0x98 blk_mq_try_issue_list_directly+0x5c/0xf0 blk_mq_sched_insert_requests+0x18c/0x200 blk_mq_flush_plug_list+0x11c/0x190 blk_flush_plug_list+0xdc/0x110 blk_finish_plug+0x38/0x210 blkdev_direct_IO+0x450/0x4d8 generic_file_read_iter+0x84/0x180 blkdev_read_iter+0x3c/0x50 aio_read+0xc0/0x170 io_submit_one+0x5c8/0xc98 __arm64_sys_io_submit+0x1b0/0x258 el0_svc_common.constprop.3+0x68/0x170 do_el0_svc+0x24/0x90 el0_sync_handler+0x13c/0x1a8 el0_sync+0x158/0x180 Code: 528847e0 72a001e0 6b00003f 540018cd (3941c340) In addition, it should not be less than 1. So add checks for these, and fail the module init for those cases. [mkp: changed if condition to match error message] Link: https://lore.kernel.org/r/1594297400-24756-2-git-send-email-john.garry@huawei.com Fixes: c4837394 ("scsi_debug: add multiple queue support") Reviewed-by:
Ming Lei <ming.lei@redhat.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Tom Rix authored
[ Upstream commit 02cd2d31 ] clang static analysis flags this error sil-sii8620.c:184:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return ret; ^~~~~~~~~~ sii8620_readb calls sii8620_read_buf. sii8620_read_buf can return without setting its output pararmeter 'ret'. So initialize ret. Fixes: ce6e153f ("drm/bridge: add Silicon Image SiI8620 driver") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200712152453.27510-1-trix@redhat.comSigned-off-by:
-
Marek Szyprowski authored
[ Upstream commit dcbabfeb ] PHY calibration is needed only for USB2.0 (UTMI) PHY, so skip calling calibration code when phy_calibrate() is called for USB3.0 (PIPE3) PHY. Fixes: d8c80bb3 ("phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200708133800.3336-1-m.szyprowski@samsung.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Laurent Pinchart authored
[ Upstream commit a6ae2fe5 ] The LG LB070WV8 panel incorrectly reports a 16 bits per component value, while the panel uses 8 bits per component. Fix it. Fixes: dd015002 ("drm/panel: simple: Add support for LG LB070WV8 800x480 7" panel") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 302a085c ] Sometimes LED won't be turned off by LED_CORE_SUSPENDRESUME flag upon system suspend. led_set_brightness_nopm() uses schedule_work() to set LED brightness. However, there's no guarantee that the scheduled work gets executed because no one flushes the work. So flush the scheduled work to make sure LED gets turned off. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Fixes: 81fe8e5b ("leds: core: Add led_set_brightness_nosleep{nopm} functions") Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 2a7e32d0 ] The pci_cfg_wait queue is used to prevent user-space config accesses to devices while they are recovering from reset. Previously we used these operations on pci_cfg_wait: __add_wait_queue(&pci_cfg_wait, ...) __remove_wait_queue(&pci_cfg_wait, ...) wake_up_all(&pci_cfg_wait) The wake_up acquires the wait queue lock, but the add and remove do not. Originally these were all protected by the pci_lock, but cdcb33f9 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock"), moved wake_up_all() outside pci_lock, so it could race with add/remove operations, which caused occasional kernel panics, e.g., during vfio-pci hotplug/unplug testing: Unable to handle kernel read from unreadable memory at virtual address ffff802dac469000 Resolve this by using wait_event() instead of __add_wait_queue() and __remove_wait_queue(). The wait queue lock is held by both wait_event() and wake_up_all(), so it provides mutual exclusion. Fixes: cdcb33f9 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock") Link: https://lore.kernel.org/linux-pci/79827f2f-9b43-4411-1376-b9063b67aee3@huawei.com/T/#u Based-on: https://lore.kernel.org/linux-pci/20191210031527.40136-1-zhengxiang9@huawei.com/Based-on-patch-by:
Xiang Zheng <zhengxiang9@huawei.com> Signed-off-by:
-
Zhu Yanjun authored
[ Upstream commit 5c99274b ] In the loopback tests, the following call trace occurs. Call Trace: __rxe_do_task+0x1a/0x30 [rdma_rxe] rxe_qp_destroy+0x61/0xa0 [rdma_rxe] rxe_destroy_qp+0x20/0x60 [rdma_rxe] ib_destroy_qp_user+0xcc/0x220 [ib_core] uverbs_free_qp+0x3c/0xc0 [ib_uverbs] destroy_hw_idr_uobject+0x24/0x70 [ib_uverbs] uverbs_destroy_uobject+0x43/0x1b0 [ib_uverbs] uobj_destroy+0x41/0x70 [ib_uverbs] __uobj_get_destroy+0x39/0x70 [ib_uverbs] ib_uverbs_destroy_qp+0x88/0xc0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb9/0xf0 [ib_uverbs] ib_uverbs_cmd_verbs+0xb16/0xc30 [ib_uverbs] The root cause is that the actual RDMA connection is not created in the loopback tests and the rxe_match_dgid will fail randomly. To fix this call trace which appear in the loopback tests, skip check of the dgid. Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200630123605.446959-1-leon@kernel.orgSigned-off-by:
Zhu Yanjun <yanjunz@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 83895227 ] Quota reservations are supposed to account for the blocks that might be allocated due to a bmap btree split. Reflink doesn't do this, so fix this to make the quota accounting more accurate before we start rearranging things. Fixes: 862bb360 ("xfs: reflink extents from one file to another") Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit eb0efe50 ] The data fork scrubber calls filemap_write_and_wait to flush dirty pages and delalloc reservations out to disk prior to checking the data fork's extent mappings. Unfortunately, this means that scrub can consume the EIO/ENOSPC errors that would otherwise have stayed around in the address space until (we hope) the writer application calls fsync to persist data and collect errors. The end result is that programs that wrote to a file might never see the error code and proceed as if nothing were wrong. xfs_scrub is not in a position to notify file writers about the writeback failure, and it's only here to check metadata, not file contents. Therefore, if writeback fails, we should stuff the error code back into the address space so that an fsync by the writer application can pick that up. Fixes: 99d9d8d0 ("xfs: scrub inode block mappings") Signed-off-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit 18ffec75 ] fimc_md_get_pinctrl() misses a check for pinctrl_lookup_state(). Add the missed check to fix it. Fixes: 4163851f ("[media] s5p-fimc: Use pinctrl API for camera ports configuration]") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 2505a210 ] If fw_csr_string() returns -ENOENT, then "name" is uninitialized. So then the "strlen(model_names[i]) <= name_len" is true because strlen() is unsigned and -ENOENT is type promoted to a very high positive value. Then the "strncmp(name, model_names[i], name_len)" uses uninitialized data because "name" is uninitialized. Fixes: 92374e88 ("[media] firedtv: drop obsolete backend abstraction") Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit f0a5e4d7 ] YangYuxi is reporting that connection reuse is causing one-second delay when SYN hits existing connection in TIME_WAIT state. Such delay was added to give time to expire both the IPVS connection and the corresponding conntrack. This was considered a rare case at that time but it is causing problem for some environments such as Kubernetes. As nf_conntrack_tcp_packet() can decide to release the conntrack in TIME_WAIT state and to replace it with a fresh NEW conntrack, we can use this to allow rescheduling just by tuning our check: if the conntrack is confirmed we can not schedule it to different real server and the one-second delay still applies but if new conntrack was created, we are free to select new real server without any delays. YangYuxi lists some of the problem reports: - One second connection delay in masquerading mode: https://marc.info/?t=151683118100004&r=1&w=2 - IPVS low throughput #70747 https://github.com/kubernetes/kubernetes/issues/70747 - Apache Bench can fill up ipvs service proxy in seconds #544 https://github.com/cloudnativelabs/kube-router/issues/544 - Additional 1s latency in `host -> service IP -> pod` https://github.com/kubernetes/kubernetes/issues/90854 Fixes: f719e375 ("ipvs: drop first packet to redirect conntrack") Co-developed-by:
YangYuxi <yx.atom1@gmail.com> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Reviewed-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 86f2da11 ] The dev_id used in request_irq() and free_irq() should match. Use 'info' in both cases. Link: https://lore.kernel.org/r/20200626040553.944352-1-christophe.jaillet@wanadoo.fr Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit d179f7c7 ] The dev_id used in request_irq() and free_irq() should match. Use 'info' in both cases. Link: https://lore.kernel.org/r/20200626035948.944148-1-christophe.jaillet@wanadoo.fr Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 7ee78aff ] There is an off-by-one bounds check on the index into arrays table->mc_reg_address and table->mc_reg_table_entry[k].mc_data[j] that can lead to reads and writes outside of arrays. Fix the bound checking off-by-one error. Addresses-Coverity: ("Out-of-bounds read/write") Fixes: cc8dbbb4 ("drm/radeon: add dpm support for CI dGPUs (v2)") Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Wang Hai authored
[ Upstream commit 85c5cbeb ] Currently the error return path from kobject_init_and_add() is not followed by a call to kobject_put() - which means we are leaking the kobject. Fix it by adding a call to kobject_put() in the error path of kobject_init_and_add(). Fixes: b087e619 ("cxl: Export optional AFU configuration record in sysfs") Reported-by:
Wang Hai <wanghai38@huawei.com> Acked-by:
Andrew Donnellan <ajd@linux.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.ibm.com> Link: https://lore.kernel.org/r/20200602120733.5943-1-wanghai38@huawei.comSigned-off-by:
-
Emil Velikov authored
[ Upstream commit 7a05c3b6 ] The helper uses the MIPI_DCS_SET_TEAR_SCANLINE, although it's currently using the generic write. This does not look right. Perhaps some platforms don't distinguish between the two writers? Cc: Robert Chiras <robert.chiras@nxp.com> Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Thierry Reding <treding@nvidia.com> Fixes: e8395081 ("drm/dsi: Implement set tear scanline") Signed-off-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
