drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_device.c:1036 kgd2kfd_interrupt() warn: inconsistent indenting
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the following W=1 kernel build warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_resource.c:128:29: warning: ‘DCN_BASE’ defined but not used [-Wunused-const-variable=]
  128 | static const struct IP_BASE DCN_BASE = { { { { 0x00000012, 0x000000C0, 0x000034C0, 0x00009000, 0x02403C00, 0, 0, 0 } },
      |                             ^~~~~~~~
Suggested-by: Roman Li <Roman.Li@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Users have reported that s2idle wasn't working on OEM Phoenix systems,
but it was root caused to be because `CONFIG_AMD_PMC` wasn't set in
the distribution kernel config.

To make this more apparent, raise the messaging to err instead of warn.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217497Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add missing debug trap registers references and initialize all debug
registers on boot by clearing the hardware exception overrides and the
wave allocation ID index.

The debugger requires that TTMPs 6 & 7 save the dispatch ID to map
waves onto dispatch during compute context inspection.
In order to correctly set this up, set the special reserved CP bit by
default whenever the MQD is initailized.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Introduce the require KGD debug calls that will execute hardware debug
mode setting.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The ROCm debugger will attach to a process to debug by PTRACE and will
expect the KFD to prepare a process for the target PID, whether the
target PID has opened the KFD device or not.

This patch is to explicity handle this requirement.  Further HW mode
setting and runtime coordination requirements will be handled in
following patches.

In the case where the target process has not opened the KFD device,
a new KFD process must be created for the target PID.
The debugger as well as the target process for this case will have not
acquired any VMs so handle process restoration to correctly account for
this.

To coordinate with HSA runtime, the debugger must be aware of the target
process' runtime enablement status and will copy the runtime status
information into the debugged KFD process for later query.

On enablement, the debugger will subscribe to a set of exceptions where
each exception events will notify the debugger through a pollable FIFO
file descriptor that the debugger provides to the KFD to manage.

Finally on process termination of either the debugger or the target,
debugging must be disabled if it has not been done so.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Expose debug capabilities in the KFD topology node's HSA capabilities and
debug properties flags.

Ensure correct capabilities are exposed based on firmware support.

Flag definitions can be referenced in uapi/linux/kfd_sysfs.h.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Introduce the GPU debug operations interface.

For ROCm-GDB to extend the GNU Debugger's ability to inspect the AMD GPU
instruction set, provide the necessary interface to allow the debugger
to HW debug-mode set and query exceptions per HSA queue, process or
device.

The runtime_enable interface coordinates exception handling with the
HSA runtime.

Usage is available in the kern docs at uapi/linux/kfd_ioctl.h.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Was leftover from GC 9.4.3 bring up and is currently
unused.  Drop it for now.

Cc: Philip.Yang@amd.com
Cc: rajneesh.bhardwaj@amd.com
Cc: Felix.Kuehling@amd.com
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Disable the pcie lane switching for some sienna_cichlid SKUs since it
might not work well on some platforms.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use the right data structure for allocation.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add unique serial number support for smu_v13_0_6.
(use aid0 serial number by default)
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add throttle status in power context
Keep throttle status indicator in SMUv13 power context

v2: Removed Dummy definition
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update PMFW interface headers to for new metrics table format and
throttling information.

v2: Added dummy definition for compilation error
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use the function of amdgpu_bo_vm_destroy to handle the resource release
of shadow bo. During the amdgpu_mes_self_test, shadow bo released, but
vmbo->shadow_list was not, which caused a null pointer reference error
in amdgpu_device_recover_vram when GPU reset.

Fixes: 6c032c37 ("drm/amdgpu: Fix vram recover doesn't work after whole GPU reset (v2)")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the following gcc with W=1:

drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:1841: warning: Function parameter or member 'event' not described in 'svm_range_evict'

Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix these warnings by deleting the deviant arguments.

gcc with W=1
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:799: warning: Excess function parameter 'pcie_index' description in 'amdgpu_device_indirect_wreg'
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:799: warning: Excess function parameter 'pcie_data' description in 'amdgpu_device_indirect_wreg'
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:870: warning: Excess function parameter 'pcie_index' description in 'amdgpu_device_indirect_wreg64'
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:870: warning: Excess function parameter 'pcie_data' description in 'amdgpu_device_indirect_wreg64'

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix this warning by adding 'ring' arguments to kdoc.

gcc with W=1
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1128: warning: Function parameter or member 'ring' not described in 'sdma_v6_0_ring_pad_ib'

Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the following W=1 kernel build warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_vba.c:936: warning: Cannot understand  * *************************************************************************

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We want to do -Werror builds on our CI. However, non-amdgpu breakages
have prevented us from doing so thus far. Also, there are a number of
additional checks that we should enable, that the community cares about
and are hidden behind -Wextra. So, define DRM_AMDGPU_WERROR to only
enable -Werror for the amdgpu kernel module and enable -Wextra while
disabling all of the checks that are too noisy.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenny Ho <kenny.ho@amd.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Kenny Ho <Kenny.Ho@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

clang with W=1 reports
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_int_process_v11.c:282:38: error: variable
  'sq_int_priv' set but not used [-Werror,-Wunused-but-set-variable]
        uint8_t sq_int_enc, sq_int_errtype, sq_int_priv;
                                            ^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

commit cf488dcd ("drm/amd: Allow s0ix without BIOS support") showed
improvements to power consumption over suspend when s0ix wasn't enabled in
BIOS and the system didn't support S3.

This patch however was misguided because the reason the system didn't
support S3 was because SMT was disabled in OEM BIOS setup.
This prevented the BIOS from allowing S3.

Also allowing GPUs to use the s2idle path actually causes problems if
they're invoked on systems that may not support s2idle in the platform
firmware. `systemd` has a tendency to try to use `s2idle` if `deep` fails
for any reason, which could lead to unexpected flows.

The original commit also fixed a problem during resume from suspend to idle
without hardware support, but this is no longer necessary with commit
ca475186 ("drm/amd: Don't allow s0ix on APUs older than Raven")

Revert commit cf488dcd ("drm/amd: Allow s0ix without BIOS support")
to make it match the expected behavior again.

Cc: Rafael Ávila de Espíndola <rafael@espindo.la>
Link: https://github.com/torvalds/linux/blob/v6.1/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c#L1060
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2599Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the following W=1 kernel build warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:45: warning: Cannot understand  * @DCN32_CRB_SEGMENT_SIZE_KB: Maximum Configurable Return Buffer size for
 on line 45 - I thought it was a doc line

Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the following gcc with W=1:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1904: warning: Function parameter or member 'dc' not described in 'delay_cursor_until_vupdate'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1904: warning: Function parameter or member 'pipe_ctx' not described in 'delay_cursor_until_vupdate'

Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the following W=1 kernel build warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:97: warning: Cannot understand  * **************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:264: warning: Cannot understand  * *************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:435: warning: Cannot understand  * *************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:475: warning: Cannot understand  * *************************************************************************

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:599:
warning: Function parameter or member 'dc' not described in
'dcn32_can_support_mclk_switch_using_fw_based_vblank_stretch'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:599:
warning: Function parameter or member 'context' not described in
'dcn32_can_support_mclk_switch_using_fw_based_vblank_stretch'

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:587:
warning: Function parameter or member 'dc' not described in
'dcn32_can_support_mclk_switch_using_fw_based_vblank_stretch'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:587:
warning: Function parameter or member 'context' not described in
'dcn32_can_support_mclk_switch_using_fw_based_vblank_stretch'

Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

After drm conduct amdgpu Makefile, amdgpu.ko has been created
and "amdgpu-y +=" in amdxcp Makefile isn't used.
So modify amdgpu-y to amdxcp-y and build amdxcp module.
Signed-off-by: Bob Zhou <bob.zhou@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix these warnings by adding & deleting the deviant arguments.

gcc with W=1
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Function parameter or member 'node' not described in 'svm_migrate_vma_to_ram'
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Function parameter or member 'trigger' not described in 'svm_migrate_vma_to_ram'
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Function parameter or member 'fault_page' not described in 'svm_migrate_vma_to_ram'
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Excess function parameter 'adev' description in 'svm_migrate_vma_to_ram'
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:771: warning: Function parameter or member 'fault_page' not described in 'svm_migrate_vram_to_ram'

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Set finished fence to ETIME error if job timedout.
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix these warnings by adding 'xcp_id' argument.

gcc with W=1
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:160: warning: Function parameter or member 'xcp_id' not described in 'amdgpu_amdkfd_reserve_mem_limit'

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix these warnings by adding 'inst' arguments to kdocs.

gcc with W=1
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:428: warning: Function parameter or member 'inst' not described in 'gmc_v7_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:626: warning: Function parameter or member 'inst' not described in 'gmc_v8_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c:423: warning: Function parameter or member 'inst' not described in 'gmc_v10_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c:328: warning: Function parameter or member 'inst' not described in 'gmc_v11_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:950: warning: Function parameter or member 'inst' not described in 'gmc_v9_0_flush_gpu_tlb_pasid'

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix up missing kdoc parameter 'inst' in get_wave_count() & kgd_gfx_v9_get_cu_occupancy()

Fix these warnings by adding 'inst' arguments to kdocs.

gcc with W=1
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:692: warning: Function parameter or member 'inst' not described in 'get_wave_count'
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:763: warning: Function parameter or member 'inst' not described in 'kgd_gfx_v9_get_cu_occupancy'

Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix these warnings by adding 'xcc_id' arguments.

gcc with W=1
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1557: warning: Function parameter or member 'xcc_id' not described in 'gfx_v7_0_select_se_sh'
drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.c:38: warning: Function parameter or member 'xcc_id' not described in 'amdgpu_gfx_rlc_enter_safe_mode'
drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.c:62: warning: Function parameter or member 'xcc_id' not described in 'amdgpu_gfx_rlc_exit_safe_mode'

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If a return error is raised during validation and mapping of a
prange, this flag is set. It is a rare occurrence, but it could happen
when `amdgpu_hmm_range_get_pages_done` returns true. In such cases,
the caller should retry. However, it is important to ensure that the
prange is updated correctly during the retry.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For ASICs which are not initialized through discovery, initialize GFX
cluster as 1.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the following gcc with W=1:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2806: warning: Cannot understand  * *************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2855: warning: Cannot understand  * *************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2900: warning: Function parameter or member 'dc' not described in 'dcn32_assign_fpo_vactive_candidate'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2900: warning: Function parameter or member 'context' not described in 'dcn32_assign_fpo_vactive_candidate'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2900: warning: Function parameter or member 'fpo_candidate_stream' not described in 'dcn32_assign_fpo_vactive_candidate'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2929: warning: Function parameter or member 'dc' not described in 'dcn32_find_vactive_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2929: warning: Function parameter or member 'context' not described in 'dcn32_find_vactive_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2929: warning: Function parameter or member 'vactive_margin_req_us' not described in 'dcn32_find_vactive_pipe'

Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the following gcc with W=1:

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'dc' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'update_type' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'planes_count' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'stream' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'stream_update' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'array_of_surface_update' not described in 'update_planes_and_stream_adapter'

Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the following gcc with W=1:

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:292: warning: Cannot understand  * @create_dmamap_sg_bo: Creates a amdgpu_bo object to reflect information

Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

for_each_inst modifies xcc_mask and therefore the loop doesn't
initialize properly interrupts on all pipes. Keep looping through xcc as
the outer loop to fix this issue.

Fixes: c4050ff1 ("drm/amdkfd: Use xcc mask for identifying xcc")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For GC 9.4.3, set gfx_target_version to 90402 for rev 1 and later (APU
or dGPU), 90401 for rev 0 dGPU, and 90400 for rev 0 APU.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Address a bunch of kdoc warnings:

gcc with W=1
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:248: warning: Function parameter or member 'job' not described in 'sdma_v6_0_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:248: warning: Function parameter or member 'flags' not described in 'sdma_v6_0_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:946: warning: Function parameter or member 'timeout' not described in 'sdma_v6_0_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1125: warning: Function parameter or member 'ring' not described in 'sdma_v6_0_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1176: warning: Function parameter or member 'vmid' not described in 'sdma_v6_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1176: warning: Function parameter or member 'pd_addr' not described in 'sdma_v6_0_ring_emit_vm_flush'

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>