- 01 Jun, 2020 9 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== Fix infinite loop in bridge and vxlan modules When suppressing invalid IPv6 Neighbour Solicitation messages, it is possible for the bridge and vxlan modules to get stuck in an infinite loop. See the individual changelogs for detailed explanation of the problem and solution. The bug was originally reported against the bridge module, but after auditing the code base I found that the buggy code was copied from the vxlan module. This patch set fixes both modules. Could not find more instances of the problem. Please consider both patches for stable releases. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When proxy mode is enabled the vxlan device might reply to Neighbor Solicitation (NS) messages on behalf of remote hosts. In case the NS message includes the "Source link-layer address" option [1], the vxlan device will use the specified address as the link-layer destination address in its reply. To avoid an infinite loop, break out of the options parsing loop when encountering an option with length zero and disregard the NS message. This is consistent with the IPv6 ndisc code and RFC 4886 which states that "Nodes MUST silently discard an ND packet that contains an option with length zero" [2]. [1] https://tools.ietf.org/html/rfc4861#section-4.3 [2] https://tools.ietf.org/html/rfc4861#section-4.6 Fixes: 4b29dba9 ("vxlan: fix nonfunctional neigh_reduce()") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When neighbor suppression is enabled the bridge device might reply to Neighbor Solicitation (NS) messages on behalf of remote hosts. In case the NS message includes the "Source link-layer address" option [1], the bridge device will use the specified address as the link-layer destination address in its reply. To avoid an infinite loop, break out of the options parsing loop when encountering an option with length zero and disregard the NS message. This is consistent with the IPv6 ndisc code and RFC 4886 which states that "Nodes MUST silently discard an ND packet that contains an option with length zero" [2]. [1] https://tools.ietf.org/html/rfc4861#section-4.3 [2] https://tools.ietf.org/html/rfc4861#section-4.6 Fixes: ed842fae ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alla Segal <allas@mellanox.com> Tested-by: Alla Segal <allas@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick Eigensatz authored
After allocating the spare nexthop group it should be tested for kzalloc() returning NULL, instead the already used nexthop group (which cannot be NULL at this point) had been tested so far. Additionally, if kzalloc() fails, return ERR_PTR(-ENOMEM) instead of NULL. Coverity-id: 1463885 Reported-by: Coverity <scan-admin@coverity.com> Signed-off-by: Patrick Eigensatz <patrickeigensatz@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-06-01 Here's one last bluetooth-next pull request for 5.8, which I hope can still be accepted. - Enabled Wide-Band Speech (WBS) support for Qualcomm wcn3991 - Multiple fixes/imprvovements to Qualcomm-based devices - Fix GAP/SEC/SEM/BI-10-C qualfication test case - Added support for Broadcom BCM4350C5 device - Several other smaller fixes & improvements Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zijun Hu authored
QCA6390 memdump VSE sometimes come to bluetooth driver with wrong sequence number as illustrated as follows: frame # in dec: frame data in hex 1396: ff fd 01 08 74 05 00 37 8f 14 1397: ff fd 01 08 75 05 00 ff bf 38 1414: ff fd 01 08 86 05 00 fb 5e 4b 1399: ff fd 01 08 77 05 00 f3 44 0a 1400: ff fd 01 08 78 05 00 ca f7 41 it is mistook for controller missing packets, so results in page fault after overwriting memdump buffer allocated. Fixed by ignoring QCA6390 sequence number check and checking buffer space before writing. Signed-off-by: Zijun Hu <zijuhu@codeaurora.org> Tested-by: Zijun Hu <zijuhu@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Zijun Hu authored
serdev_device_write() is not appropriate at here because serdev_device_write_wakeup() is not used to release completion hold by the former at @write_wakeup member of struct serdev_device_ops. Fix by using serdev_device_write_buf() instead of serdev_device_write(). Signed-off-by: Zijun Hu <zijuhu@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Zijun Hu authored
Controller ID info got by VSC EDL_PATCH_GETVER is very important, so improve its log level from DEBUG to INFO. Signed-off-by: Zijun Hu <zijuhu@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller authored
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 31 May, 2020 31 commits
-
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Another set of changes, including * many 6 GHz changes, though it's not _quite_ complete (I left out scanning for now, we're still discussing) * allow userspace SA-query processing for operating channel validation * TX status for control port TX, for AP-side operation * more per-STA/TID control options * move to kHz for channels, for future S1G operation * various other small changes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Yes, staying withing 80 columns is certainly still _preferred_. But it's not the hard limit that the checkpatch warnings imply, and other concerns can most certainly dominate. Increase the default limit to 100 characters. Not because 100 characters is some hard limit either, but that's certainly a "what are you doing" kind of value and less likely to be about the occasional slightly longer lines. Miscellanea: - to avoid unnecessary whitespace changes in files, checkpatch will no longer emit a warning about line length when scanning files unless --strict is also used - Add a bit to coding-style about alignment to open parenthesis Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A pile of x86 fixes: - Prevent a memory leak in ioperm which was caused by the stupid assumption that the exit cleanup is always called for current, which is not the case when fork fails after taking a reference on the ioperm bitmap. - Fix an arithmething overflow in the DMA code on 32bit systems - Fill gaps in the xstate copy with defaults instead of leaving them uninitialized - Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out that existing user space fails to build" * tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioperm: Prevent a memory leak when fork fails x86/dma: Fix max PFN arithmetic overflow on 32 bit systems copy_xstate_to_kernel(): don't leave parts of destination uninitialized x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single scheduler fix preventing a crash in NUMA balancing. The current->mm check is not reliable as the mm might be temporary due to use_mm() in a kthread. Check for PF_KTHREAD explictly" * tag 'sched-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Don't NUMA balance for kthreads
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: "Another week, another set of bug fixes: 1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long. 2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin Long. 3) Re-arm discovery timer properly in mac80211 mesh code, from Linus Lüssing. 4) Prevent buffer overflows in nf_conntrack_pptp debug code, from Pablo Neira Ayuso. 5) Fix race in ktls code between tls_sw_recvmsg() and tls_decrypt_done(), from Vinay Kumar Yadav. 6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni. 7) More validation is necessary of untrusted GSO packets coming from virtualization devices, from Willem de Bruijn. 8) Fix endianness of bnxt_en firmware message length accesses, from Edwin Peer. 9) Fix infinite loop in sch_fq_pie, from Davide Caratti. 10) Fix lockdep splat in DSA by setting lockless TX in netdev features for slave ports, from Vladimir Oltean. 11) Fix suspend/resume crashes in mlx5, from Mark Bloch. 12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov. 13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu. 14) Fix leak in inetdev_init(), from Yang Yingliang. 15) Don't try to use inet hash and unhash in l2tp code, results in crashes. From Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits) l2tp: add sk_family checks to l2tp_validate_socket l2tp: do not use inet_hash()/inet_unhash() net: qrtr: Allocate workqueue before kernel_bind mptcp: remove msk from the token container at destruction time. mptcp: fix race between MP_JOIN and close mptcp: fix unblocking connect() net/sched: act_ct: add nat mangle action only for NAT-conntrack devinet: fix memleak in inetdev_init() virtio_vsock: Fix race condition in virtio_transport_recv_pkt drivers/net/ibmvnic: Update VNIC protocol version reporting NFC: st21nfca: add missed kfree_skb() in an error path neigh: fix ARP retransmit timer guard bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones bpf, selftests: Verifier bounds tests need to be updated bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones bpf: Fix use-after-free in fmod_ret check net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta() net/mlx5e: Fix MLX5_TC_CT dependencies net/mlx5e: Properly set default values when disabling adaptive moderation net/mlx5e: Fix arch depending casting issue in FEC ...
-
Nathan Errera authored
With some newer AKMs, the KCK and KEK are bigger, so allow that if the driver advertises support for it. In addition, add a new attribute for the AKM so we can use it for offloaded rekeying. Signed-off-by: Nathan Errera <nathan.errera@intel.com> [reword commit message] Link: https://lore.kernel.org/r/20200528212237.5eb58b00a5d1.I61b09d77c4f382e8d58a05dcca78096e99a6bc15@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Tova Mussai authored
Set short slot also for 6 GHz band, just like 5 GHz. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Link: https://lore.kernel.org/r/20200528213443.75f38e6f5efd.I272fbae402b03123f04e9ae69204eeab960c70cd@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Ilan Peer authored
Treat it like the 5 GHz band. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20200528213443.889e5c9dd006.Id8ed3bb8000ba8738be5df05639415eb2e23c61a@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
On 6 GHz, stations don't have ht_supported set, but they can still do aggregation since they must have HE, allow that. Link: https://lore.kernel.org/r/20200528213443.776d3c891b64.Ifa099d450617b50c691832b3c4aa08959fab520a@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
On 6 GHz band, HE capabilities must be available for all of the interface types, otherwise we shouldn't use 6 GHz. Check this. Link: https://lore.kernel.org/r/20200528213443.5881cb3c8c4a.I583b54172f91f98d44af64a16c5826fe458cbb27@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
On the 6 GHz band, HE should be used, but without any direct HT/VHT capabilities, instead the HE 6 GHz band capabilities will capture the relevant information. Reject HT/VHT capabilities here. Link: https://lore.kernel.org/r/20200528213443.bfe89c35459a.Ibba5e066fa0087fd49d13cfee89d196ea0c68ae2@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
If a 6 GHz channel exists, then we can probably safely assume that the device actually supports it, and then it should support most bandwidths. This will probably need to be extended to check the interface type and then dig into the HE capabilities for that though, to have the correct bandwidth check. Link: https://lore.kernel.org/r/20200528213443.d4864ef52e92.I82f09b2b14a56413ce20376d09967fe954a033eb@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Ilan Peer authored
On 6 GHz, the 6 GHz capabilities element should be added, do that. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [add commit message] Link: https://lore.kernel.org/r/20200528213443.8ee764f0cde0.I2b0c66b60e11818c97c9803e04a6a197c6376243@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
In order to handle 6 GHz AP side, take the HE 6 GHz band capability data and pass it to the driver (which needs it for A-MPDU spacing and A-MPDU length). Link: https://lore.kernel.org/r/1589399105-25472-6-git-send-email-rmanohar@codeaurora.orgCo-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/20200528213443.784e4890d82f.I5f1230d5ab27e84e7bbe88e3645b24ea15a0c146@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Shaul Triebitz authored
An AP supporting EMA (Enhanced Multi-BSSID advertisement) should set bit 83 in the extended capabilities IE (9.4.2.26 in the 802.11ax D5 spec). So the *3rd* bit of the 10th byte should be checked. Also, in one place, the wrong byte was checked. (cfg80211_find_ie returns a pointer to the beginning of the IE, so the data really starts at ie[2], so the 10th byte should be ie[12]. To avoid this confusion, use cfg80211_find_elem instead). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Link: https://lore.kernel.org/r/20200528213443.4316121fa2a3.I9745582f8d41ad8e689dac0fefcd70b276d7c1ea@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Support connecting to HE 6 GHz APs and mesh networks on 6 GHz, where the HT/VHT information is missing but instead the HE 6 GHz band capability is present, and the 6 GHz Operation information field is used to encode the channel configuration instead of the HT/VHT operation elements. Also add some other bits needed to connect to 6 GHz networks. Link: https://lore.kernel.org/r/1589399105-25472-10-git-send-email-rmanohar@codeaurora.orgCo-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/20200528213443.25687d2695bc.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
If the AP advertises inconsistent data, namely it has CCFS1 or CCFS2, but doesn't advertise support for 160/80+80 bandwidth or "Extended NSS BW Support", then we cannot use any MCSes in the the higher bandwidth. Thus, avoid connecting with higher bandwidth since it's less efficient that way. Link: https://lore.kernel.org/r/20200528213443.0e55d40c3ccc.I6fd0b4708ebd087e5e46466c3e91f6efbcbef668@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Rajkumar Manoharan authored
As HT/VHT elements are not allowed in 6 GHz band, do not include them in mesh beacon template formation. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-9-git-send-email-rmanohar@codeaurora.org Link: https://lore.kernel.org/r/20200528193455.76796-2-johannes@sipsolutions.netSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Rajkumar Manoharan authored
Add 6 GHz operation information (IEEE 802.11ax/D6.0, Figure 9-787k) while building HE operation element for non-HE AP. This field is used to determine channel information in the absence of HT/VHT IEs. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-8-git-send-email-rmanohar@codeaurora.org [fix skb allocation size] Link: https://lore.kernel.org/r/20200528193455.76796-1-johannes@sipsolutions.netSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Rajkumar Manoharan authored
Construct HE 6 GHz band capability element (IEEE 802.11ax/D6.0, 9.4.2.261) for association request and mesh beacon. The 6 GHz capability information is passed by driver through iftypes caps. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-7-git-send-email-rmanohar@codeaurora.org [handle SMPS, adjust for previous patches, reserve SKB space properly, change to handle SKB directly] Link: https://lore.kernel.org/r/20200528213443.643aa8101111.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
These capabilities cover what would otherwise be transported in HT/VHT capabilities, but only a subset thereof that is actually needed on 6 GHz with HE already present. Expose the capabilities to userspace, drivers are expected to set them as using the 6 GHz band (currently) requires HE capability. Link: https://lore.kernel.org/r/20200528213443.244cd5cb9db8.Icd8c773277a88c837e7e3af1d4d1013cc3b66543@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Rajkumar Manoharan authored
Handle 6 GHz band capability element parsing for association. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-4-git-send-email-rmanohar@codeaurora.org [some renaming to be in line with previous patches] Link: https://lore.kernel.org/r/20200528213443.a13d7a0b85b0.Ia07584da4fc77aa77c4cc563248d2ce4234ffe5d@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Rajkumar Manoharan authored
Handle 6 GHz HE capability while adding new station. It will be used later in mac80211 station processing. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-2-git-send-email-rmanohar@codeaurora.org [handle nl80211_set_station, require WME, remove NL80211_HE_6GHZ_CAPABILITY_LEN] Link: https://lore.kernel.org/r/20200528213443.b6b711fd4312.Ic9b97d57b6c4f2b28d4b2d23d2849d8bc20bd8cc@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Add the HE extended element IDs and the definitions for the HE 6 GHz band capabilities element, from Draft 5.0. Link: https://lore.kernel.org/r/20200528213443.1a6689fe093f.Ifdc5400fb01779351354daf38663ebeea03c9ad9@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Add some code to obtain and parse the 6 GHz operation field inside the HE operation element. While at it, fix the required length using sizeof() the new struct, which is 5 instead of 4 now. Link: https://lore.kernel.org/r/20200528213443.42ca72c45ca9.Id74bc1b03da9ea6574f9bc70deeb60dfc1634359@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Tova Mussai authored
Add the necessary definitions to parse reduced neighbor report elements. Signed-off-by: Tova Mussai <tova.mussai@intel.com> [change struct name, remove IEEE80211_MIN_AP_NEIGHBOR_INFO_SIZE] Link: https://lore.kernel.org/r/20200528213443.4f9154461c06.I518d9898ad982f838112ea9ca14a20d6bbb16394@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
This allows identifying whether or not a channel is a PSC (preferred scanning channel). Link: https://lore.kernel.org/r/20200528213443.414363ecf62c.Ic15e681a0e249eab7350a06ceb582cca8bb9a080@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
My previous commit here was wrong, it didn't check the new flag in two necessary places, so things didn't work. Fix that. Fixes: 155d7c73 ("nl80211: allow client-only BIGTK support") Link: https://lore.kernel.org/r/20200528213443.993f108e96ca.I0086ae42d672379380d04ac5effb2f3d5135731b@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Arend Van Spriel authored
The 6GHz band does not have regulatory approval yet, but things are moving forward. However, that has led to a change in the channelization of the 6GHz band which has been accepted in the 11ax specification. It also fixes a missing MHZ_TO_KHZ() macro for 6GHz channels while at it. This change is primarily thrown in to discuss how to deal with it. I noticed ath11k adding 6G support with old channelization and ditto for iw. It probably involves changes in hostapd as well. Cc: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Cc: Jouni Malinen <jouni@w1.fi> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/edf07cdd-ad15-4012-3afd-d8b961a80b69@broadcom.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
The updates to change to kHz frequencies and the 6 GHz additions evidently overlapped (or rather, I didn't see it when applying the latter), so the 6 GHz is broken. Fix this. Fixes: 934f4c7d ("cfg80211: express channels with a KHz component") Link: https://lore.kernel.org/r/20200529140425.1bf824f6911b.I4a1174916b8f5965af4366999eb9ffc7a0347470@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Eric Dumazet authored
syzbot was able to trigger a crash after using an ISDN socket and fool l2tp. Fix this by making sure the UDP socket is of the proper family. BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78 Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018 CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382 __kasan_report.cold+0x20/0x38 mm/kasan/report.c:511 kasan_report+0x33/0x50 mm/kasan/common.c:625 setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78 l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523 l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249 genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline] genl_family_rcv_msg net/netlink/genetlink.c:718 [inline] genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:746 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e6/0x810 net/socket.c:2352 ___sys_sendmsg+0x100/0x170 net/socket.c:2406 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x45ca29 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007effe76edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004fe1c0 RCX: 000000000045ca29 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000094e R14: 00000000004d5d00 R15: 00007effe76ee6d4 Allocated by task 3018: save_stack+0x1b/0x40 mm/kasan/common.c:49 set_track mm/kasan/common.c:57 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x161/0x7a0 mm/slab.c:3665 kmalloc include/linux/slab.h:560 [inline] sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612 sk_alloc+0x36/0x1100 net/core/sock.c:1666 data_sock_create drivers/isdn/mISDN/socket.c:600 [inline] mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796 __sock_create+0x3cb/0x730 net/socket.c:1428 sock_create net/socket.c:1479 [inline] __sys_socket+0xef/0x200 net/socket.c:1521 __do_sys_socket net/socket.c:1530 [inline] __se_sys_socket net/socket.c:1528 [inline] __x64_sys_socket+0x6f/0xb0 net/socket.c:1528 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Freed by task 2484: save_stack+0x1b/0x40 mm/kasan/common.c:49 set_track mm/kasan/common.c:57 [inline] kasan_set_free_info mm/kasan/common.c:317 [inline] __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456 __cache_free mm/slab.c:3426 [inline] kfree+0x109/0x2b0 mm/slab.c:3757 kvfree+0x42/0x50 mm/util.c:603 __free_fdtable+0x2d/0x70 fs/file.c:31 put_files_struct fs/file.c:420 [inline] put_files_struct+0x248/0x2e0 fs/file.c:413 exit_files+0x7e/0xa0 fs/file.c:445 do_exit+0xb04/0x2dd0 kernel/exit.c:791 do_group_exit+0x125/0x340 kernel/exit.c:894 get_signal+0x47b/0x24e0 kernel/signal.c:2739 do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784 exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:279 [inline] do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305 entry_SYSCALL_64_after_hwframe+0x49/0xb3 The buggy address belongs to the object at ffff88808ed0c000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1424 bytes inside of 2048-byte region [ffff88808ed0c000, ffff88808ed0c800) The buggy address belongs to the page: page:ffffea00023b4300 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00 raw: 0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 6b9f3423 ("l2tp: fix races in tunnel creation") Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Cc: Guillaume Nault <gnault@redhat.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-