- 21 Jun, 2024 3 commits
-
-
Rob Clark authored
This should allow disabling the zap node via an overlay, for slbounce. Suggested-by:
Nikita Travkin <nikita@trvn.ru> Signed-off-by:
Rob Clark <robdclark@chromium.org> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Bjorn Andersson <quic_bjorande@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/594572/
-
Rob Clark authored
When debugging faults, it is useful to know how the BO is mapped (cached vs WC, gpu readonly, etc). Signed-off-by:
Akhil P Oommen <quic_akhilpo@quicinc.com> Acked-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
-
Rob Clark authored
Perfetto can use these traces to track global and per-process GPU memory usage. Signed-off-by:
-
- 20 Jun, 2024 7 commits
-
-
Konrad Dybcio authored
UBWC_MODE is a one-bit-wide field, so a value of 2 is obviously bogus. Replace it with the correct value (0). Fixes: 18397519 ("drm/msm/adreno: Add A702 support") Reported-by:
Connor Abbott <cwabbott0@gmail.com> Closes: https://lore.kernel.org/linux-arm-msm/CACu1E7FTN=kwaDJMNiTmFspALzj2+Q-nvsN5ugi=vz4RdUGvGw@mail.gmail.com/Signed-off-by:
-
Abhinav Kumar authored
GCC diagnostic pragma method throws below warnings in some of the versions drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:16:9: warning: unknown option after '#pragma GCC diagnostic' kind [-Wpragmas] #pragma GCC diagnostic ignored "-Wunused-const-variable" ^ In file included from drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:18:0: drivers/gpu/drm/msm/adreno/adreno_gen7_0_0_snapshot.h:924:19: warning: 'gen7_0_0_external_core_regs' defined but not used [-Wunused-variable] static const u32 *gen7_0_0_external_core_regs[] = { ^ In file included from drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:19:0: drivers/gpu/drm/msm/adreno/adreno_gen7_2_0_snapshot.h:748:19: warning: 'gen7_2_0_external_core_regs' defined but not used [-Wunused-variable] static const u32 *gen7_2_0_external_core_regs[] = { ^ In file included from drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:20:0: drivers/gpu/drm/msm/adreno/adreno_gen7_9_0_snapshot.h:1188:43: warning: 'gen7_9_0_sptp_clusters' defined but not used [-Wunused-variable] static struct gen7_sptp_cluster_registers gen7_9_0_sptp_clusters[] = { ^ drivers/gpu/drm/msm/adreno/adreno_gen7_9_0_snapshot.h:1438:19: warning: 'gen7_9_0_external_core_regs' defined but not used [-Wunused-variable] static const u32 *gen7_9_0_external_core_regs[] = { Remove GCC version dependency by using __unused__ for the unused gen7_* includes. Changes in v2: - Fix the warnings in the commit text - Use __attribute((__unused__)) instead of local assignment changes in v3: - drop the Link from the auto add changes in v4: - replace __attribute((__unused__)) with __always_unused Fixes: 64d62556 ("drm/msm: More fully implement devcoredump for a7xx") Suggested-by:Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by:
-
Rob Clark authored
Move the CP_PROTECT settings into the hw catalog. Signed-off-by:
-
Rob Clark authored
Introduce a6xx_info where we can stash gen specific stuff without polluting the toplevel adreno_info struct. Signed-off-by:
-
Rob Clark authored
Move the hwcg tables into the hw catalog. Signed-off-by:
-
Rob Clark authored
Split each gen's gpu table into it's own file. Only code-motion, no functional change. Signed-off-by:
-
Rob Clark authored
Split into a separate table per generation, in preparation to move each gen's device table to it's own file. Signed-off-by:
-
- 12 Jun, 2024 4 commits
-
-
Dmitry Baryshkov authored
Merge drm-misc-next tree into the msm-next tree in order to be able to use HDMI connector framework for the MSM HDMI driver.
-
Dmitry Baryshkov authored
In order to let bridge chains implement HDMI connector infrastructure, add necessary glue code to the drm_bridge_connector. In case there is a bridge that sets DRM_BRIDGE_OP_HDMI, drm_bridge_connector will register itself as a HDMI connector and provide proxy drm_connector_hdmi_funcs implementation. Note, to simplify implementation, there can be only one bridge in a chain that sets DRM_BRIDGE_OP_HDMI. Setting more than one is considered an error. This limitation can be lifted later, if the need arises. Acked-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240607-bridge-hdmi-connector-v5-3-ab384e6021af@linaro.orgSigned-off-by:
-
Dmitry Baryshkov authored
Turn drm_bridge_connector to using drmm_kzalloc() and drmm_connector_init() and drop the custom destroy function. The drm_connector_unregister() and fwnode_handle_put() are already handled by the drm_connector_cleanup() and so are safe to be dropped. Acked-by:
-
Dmitry Baryshkov authored
Add drm_atomic_helper_connector_hdmi_disable_audio_infoframe(), an API to allow the driver disable sending the Audio Infoframe. This is to be used by the drivers if setup of the infoframes is not tightly coupled with the audio functionality and just disabling the audio playback doesn't stop the HDMI hardware from sending the Infoframe. Acked-by:
-
- 11 Jun, 2024 23 commits
-
-
Douglas Anderson authored
Now that most panels have been updated not to track/double-check their prepared/enabled state update the TODO with next steps. Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240604172305.v3.23.I104cdece7324b0c365e552a17f9883414ffaea01@changeidSigned-off-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by IMX boards. The IMX driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Robert Chiras <robert.chiras@nxp.com> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. The conversion of the rm67191 panel driver follows many of the other panel drivers but has a few differences that need to be called out. Like in commit 1e0465eb ("drm/panel: otm8009a: Don't double check prepared/enabled"), this panel also uses the "prepared" flag to prevent the backlight functions from running when the panel is powered off. This is probably not the safest thing to do but the old behavior was preserved. See the discussion in the otm8009a patch. Because of this, I've left the driver tracking "prepared" but removed its tracking of "enabled". NOTE: as part of this, transition the panel's direct calls to its disable/unprepare functions in shutdown to call through DRM panel. Cc: Robert Chiras <robert.chiras@nxp.com> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Qualcomm boards. The Qualcomm driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Werner Johansson <werner.johansson@sonymobile.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Werner Johansson <werner.johansson@sonymobile.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Tegra boards. The Tegra driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Thierry Reding <treding@nvidia.com> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Thierry Reding <treding@nvidia.com> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by IMX boards. As far as I can tell, all IMX boards are now correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Marco Franchi <marco.franchi@nxp.com> Cc: Fabio Estevam <festevam@denx.de> Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: imx@lists.linux.dev Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Marco Franchi <marco.franchi@nxp.com> Cc: Fabio Estevam <festevam@denx.de> Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: imx@lists.linux.dev Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, grepping mainline for this panel's compatible string shows no hits, so we can't be 100% sure if the DRM modeset driver used with this panel has been fixed. If it is found that the DRM modeset driver hasn't been fixed then this patch could be temporarily reverted until it is. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Werner Johansson <werner.johansson@sonymobile.com> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Werner Johansson <werner.johansson@sonymobile.com> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Qualcomm boards. The Qualcomm driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. NOTE: as part of this, transition the panel's direct calls to its disable function in shutdown/remove to call through DRM panel. Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, grepping mainline for this panel's compatible string shows no hits, so we can't be 100% sure if the DRM modeset driver used with this panel has been fixed. If it is found that the DRM modeset driver hasn't been fixed then this patch could be temporarily reverted until it is. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Neil Armstrong <neil.armstrong@linaro.org> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Neil Armstrong <neil.armstrong@linaro.org> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by TI OMAP boards. The OMAP driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, grepping mainline for this panel's compatible string shows no hits, so we can't be 100% sure if the DRM modeset driver used with this panel has been fixed. If it is found that the DRM modeset driver hasn't been fixed then this patch could be temporarily reverted until it is. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.orgAcked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, grepping mainline for this panel's compatible string shows no hits, so we can't be 100% sure if the DRM modeset driver used with this panel has been fixed. If it is found that the DRM modeset driver hasn't been fixed then this patch could be temporarily reverted until it is. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Jacobe Zang <jacobe.zang@wesion.com> Cc: Nicolas Belin <nbelin@baylibre.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Jacobe Zang <jacobe.zang@wesion.com> Cc: Nicolas Belin <nbelin@baylibre.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, grepping mainline for this panel's compatible string shows no hits, so we can't be 100% sure if the DRM modeset driver used with this panel has been fixed. If it is found that the DRM modeset driver hasn't been fixed then this patch could be temporarily reverted until it is. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Jerry Han <jerry.han.hq@gmail.com> Cc: Jitao Shi <jitao.shi@mediatek.com> Cc: Rock Wang <rock_wang@himax.com.cn> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. NOTE: as part of this, transition the panel's direct calls to its disable/unprepare functions in shutdown/remove to call through DRM panel. Cc: Jerry Han <jerry.han.hq@gmail.com> Cc: Jitao Shi <jitao.shi@mediatek.com> Cc: Rock Wang <rock_wang@himax.com.cn> Acked-by:
-
- 10 Jun, 2024 3 commits
-
-
Kuro Chung authored
The spec of timing between IVDD/OVDD and SYSRTEN is 10ms, but SYSRSTN RC circuit need at least 25ms for rising time, update for match spec Signed-off-by:
Kuro Chung <kuro.chung@ite.com.tw> Signed-off-by:
Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
Adam Ford authored
The VFP, HBP, and HSA are divided between the available lanes if there is more than one lane. For certain timings and lane configurations, the HFP may not be evenly divisible. If the HFP is rounded down, it ends up being too small which can cause some monitors to not sync properly. In these instances, adjust htotal and hsync to round the HFP up, and recalculate the htotal. This allows 720P-60 to operation on an i.MX8MP with a four-lane configuration. Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM with HDMI monitor Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
-
Adam Ford authored
The P divider should be set based on the min and max values of the fin pll which may vary between different platforms. These ranges are defined per platform, but hard-coded values were used instead which resulted in a smaller range available on the i.MX8M[MNP] than what was possible. As noted by Frieder, there are descripencies between the reference manuals of the Mini, Nano and Plus, so I reached out to my NXP rep and got the following response regarding the varing notes in the documentation. "Yes it is definitely wrong, the one that is part of the NOTE in MIPI_DPHY_M_PLLPMS register table against PMS_P, PMS_M and PMS_S is not correct. I will report this to Doc team, the one customer should be take into account is the Table 13-40 DPHY PLL Parameters and the Note above." With this patch, the clock rates now match the values used in NXP's downstream kernel. Fixes: 84630718 ("drm/bridge: samsung-dsim: update PLL reference clock") Signed-off-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by:
Marek Vasut <marex@denx.de> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
