- 10 Oct, 2018 16 commits
-
-
Jia-Ju Bai authored
[ Upstream commit 16fe10cf ] The kernel module may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] usleep_range drivers/net/ethernet/cadence/macb_main.c, 648: usleep_range in macb_halt_tx drivers/net/ethernet/cadence/macb_main.c, 730: macb_halt_tx in macb_tx_error_task drivers/net/ethernet/cadence/macb_main.c, 721: _raw_spin_lock_irqsave in macb_tx_error_task To fix this bug, usleep_range() is replaced with udelay(). This bug is found by my static analysis tool DSAC. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masahiro Yamada authored
[ Upstream commit 4c85609b ] This driver currently emits a STOP if the next message is not I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR ioctl, where read/write transactions are combined without STOP between. Issue STOP only when the message is the last one _or_ flagged with I2C_M_STOP. Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 38f5d8d8 ] This driver currently emits a STOP if the next message is not I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR ioctl, where read/write transactions are combined without STOP between. Issue STOP only when the message is the last one _or_ flagged with I2C_M_STOP. Fixes: dd6fd4a3 ("i2c: uniphier: add UniPhier FIFO-less I2C driver") Signed-off-by:
-
Xiao Ni authored
[ Upstream commit 1d0ffd26 ] In raid10 reshape_request it gets max_sectors in read_balance. If the underlayer disks have bad blocks, the max_sectors is less than last. It will call goto read_more many times. It calls raise_barrier(conf, sectors_done != 0) every time. In this condition sectors_done is not 0. So the value passed to the argument force of raise_barrier is true. In raise_barrier it checks conf->barrier when force is true. If force is true and conf->barrier is 0, it panic. In this case reshape_request submits bio to under layer disks. And in the callback function of the bio it calls lower_barrier. If the bio finishes before calling raise_barrier again, it can trigger the BUG_ON. Add one pair of raise_barrier/lower_barrier to fix this bug. Signed-off-by:
Xiao Ni <xni@redhat.com> Suggested-by:
Neil Brown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Will Deacon authored
[ Upstream commit 3fcbb826 ] In 4.19-rc1, Eugeniy reported weird boot and IO errors on ARC HSDK | INFO: task syslogd:77 blocked for more than 10 seconds. | Not tainted 4.19.0-rc1-00007-gf213acea4e88 #40 | "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this | message. | syslogd D 0 77 76 0x00000000 | | Stack Trace: | __switch_to+0x0/0xac | __schedule+0x1b2/0x730 | io_schedule+0x5c/0xc0 | __lock_page+0x98/0xdc | find_lock_entry+0x38/0x100 | shmem_getpage_gfp.isra.3+0x82/0xbfc | shmem_fault+0x46/0x138 | handle_mm_fault+0x5bc/0x924 | do_page_fault+0x100/0x2b8 | ret_from_exception+0x0/0x8 He bisected to 84c65911 ("locking/atomics, asm-generic/bitops/lock.h: Rewrite using atomic_fetch_*()") This commit however only unmasked the real issue introduced by commit 4aef66c8 ("locking/atomic, arch/arc: Fix build") which missed the retry-if-scond-failed branch in atomic_fetch_##op() macros. The bisected commit started using atomic_fetch_##op() macros for building the rest of atomics. Fixes: 4aef66c8 ("locking/atomic, arch/arc: Fix build") Reported-by:
Eugeniy Paltsev <paltsev@synopsys.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> [vgupta: wrote changelog] Signed-off-by:
-
Vincent Whitchurch authored
[ Upstream commit d49b48f0 ] gpiochip_add_data_with_key() adds the gpiochip to the gpio_devices list before of_gpiochip_add() is called, but it's only the latter which sets the ->of_xlate function pointer. gpiochip_find() can be called by someone else between these two actions, and it can find the chip and call of_gpiochip_match_node_and_xlate() which leads to the following crash due to a NULL ->of_xlate(). Unhandled prefetch abort: page domain fault (0x01b) at 0x00000000 Modules linked in: leds_gpio(+) gpio_generic(+) CPU: 0 PID: 830 Comm: insmod Not tainted 4.18.0+ #43 Hardware name: ARM-Versatile Express PC is at (null) LR is at of_gpiochip_match_node_and_xlate+0x2c/0x38 Process insmod (pid: 830, stack limit = 0x(ptrval)) (of_gpiochip_match_node_and_xlate) from (gpiochip_find+0x48/0x84) (gpiochip_find) from (of_get_named_gpiod_flags+0xa8/0x238) (of_get_named_gpiod_flags) from (gpiod_get_from_of_node+0x2c/0xc8) (gpiod_get_from_of_node) from (devm_fwnode_get_index_gpiod_from_child+0xb8/0x144) (devm_fwnode_get_index_gpiod_from_child) from (gpio_led_probe+0x208/0x3c4 [leds_gpio]) (gpio_led_probe [leds_gpio]) from (platform_drv_probe+0x48/0x9c) (platform_drv_probe) from (really_probe+0x1d0/0x3d4) (really_probe) from (driver_probe_device+0x78/0x1c0) (driver_probe_device) from (__driver_attach+0x120/0x13c) (__driver_attach) from (bus_for_each_dev+0x68/0xb4) (bus_for_each_dev) from (bus_add_driver+0x1a8/0x268) (bus_add_driver) from (driver_register+0x78/0x10c) (driver_register) from (do_one_initcall+0x54/0x1fc) (do_one_initcall) from (do_init_module+0x64/0x1f4) (do_init_module) from (load_module+0x2198/0x26ac) (load_module) from (sys_finit_module+0xe0/0x110) (sys_finit_module) from (ret_fast_syscall+0x0/0x54) One way to fix this would be to rework the hairy registration sequence in gpiochip_add_data_with_key(), but since I'd probably introduce a couple of new bugs if I attempted that, simply add a check for a non-NULL of_xlate function pointer in of_gpiochip_match_node_and_xlate(). This works since the driver looking for the gpio will simply fail to find the gpio and defer its probe and be reprobed when the driver which is registering the gpiochip has fully completed its probe. Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Arunk Khandavalli authored
[ Upstream commit 4f0223bf ] nl80211_update_ft_ies() tried to validate NL80211_ATTR_IE with is_valid_ie_attr() before dereferencing it, but that helper function returns true in case of NULL pointer (i.e., attribute not included). This can result to dereferencing a NULL pointer. Fix that by explicitly checking that NL80211_ATTR_IE is included. Fixes: 355199e0 ("cfg80211: Extend support for IEEE 802.11r Fast BSS Transition") Signed-off-by:
Arunk Khandavalli <akhandav@codeaurora.org> Signed-off-by:
Jouni Malinen <jouni@codeaurora.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Peng Li authored
[ Upstream commit 455c4401 ] If there are packets in hardware when changing the speed or duplex, it may cause hardware hang up. This patch adds netif_carrier_off before change speed and duplex in ethtool_ops.set_link_ksettings, and adds netif_carrier_on after complete the change. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Yuan-Chi Pang authored
[ Upstream commit 1f631c32 ] IEEE 802.11-2016 14.10.8.3 HWMP sequence numbering says: If it is a target mesh STA, it shall update its own HWMP SN to maximum (current HWMP SN, target HWMP SN in the PREQ element) + 1 immediately before it generates a PREP element in response to a PREQ element. Signed-off-by:
Yuan-Chi Pang <fu3mo6goo@gmail.com> Signed-off-by:
-
Michael Hennerich authored
[ Upstream commit 6537886c ] This fixes: [BUG] gpio: gpio-adp5588: A possible sleep-in-atomic-context bug in adp5588_gpio_write() [BUG] gpio: gpio-adp5588: A possible sleep-in-atomic-context bug in adp5588_gpio_direction_input() Reported-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Danek Duvall authored
[ Upstream commit d7c863a2 ] The mac80211_hwsim driver intends to say that it supports up to four STBC receive streams, but instead it ends up saying something undefined. The IEEE80211_VHT_CAP_RXSTBC_X macros aren't independent bits that can be ORed together, but values. In this case, _4 is the appropriate one to use. Signed-off-by:
Danek Duvall <duvall@comfychair.org> Signed-off-by:
-
Danek Duvall authored
[ Upstream commit 67d1ba8a ] The mod mask for VHT capabilities intends to say that you can override the number of STBC receive streams, and it does, but only by accident. The IEEE80211_VHT_CAP_RXSTBC_X aren't bits to be set, but values (albeit left-shifted). ORing the bits together gets the right answer, but we should use the _MASK macro here instead. Signed-off-by:
-
Paul Mackerras authored
[ Upstream commit 46dec40f ] This fixes a bug which causes guest virtual addresses to get translated to guest real addresses incorrectly when the guest is using the HPT MMU and has more than 256GB of RAM, or more specifically has a HPT larger than 2GB. This has showed up in testing as a failure of the host to emulate doorbell instructions correctly on POWER9 for HPT guests with more than 256GB of RAM. The bug is that the HPTE index in kvmppc_mmu_book3s_64_hv_xlate() is stored as an int, and in forming the HPTE address, the index gets shifted left 4 bits as an int before being signed-extended to 64 bits. The simple fix is to make the variable a long int, matching the return type of kvmppc_hv_find_lock_hpte(), which is what calculates the index. Fixes: 697d3899 ("KVM: PPC: Implement MMIO emulation support for Book3S HV guests") Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Toke Høiland-Jørgensen authored
[ Upstream commit 77cfaf52 ] The TXQ teardown code can reference the vif data structures that are stored in the netdev private memory area if there are still packets on the queue when it is being freed. Since the TXQ teardown code is run after the netdevs are freed, this can lead to a use-after-free. Fix this by moving the TXQ teardown code to earlier in ieee80211_unregister_hw(). Reported-by:
Ben Greear <greearb@candelatech.com> Tested-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
Frederic Weisbecker authored
commit 07e5f5e3 upstream. This will be needed for the cputime_t to nsec conversion. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-2-git-send-email-fweisbec@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Ivan Delalande <colona@arista.com> Signed-off-by:
-
Jan Kiszka authored
commit e0bf2d49 upstream. Apparently, this driver (or the hardware) does not support character length settings. It's apparently running in 8-bit mode, but it makes userspace believe it's in 5-bit mode. That makes tcsetattr with CS8 incorrectly fail, breaking e.g. getty from busybox, thus the login shell on ttyMVx. Fix by hard-wiring CS8 into c_cflag. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Fixes: 30530791 ("serial: mvebu-uart: initial support for Armada-3700 serial port") Cc: stable <stable@vger.kernel.org> # 4.6+ Signed-off-by:
-
- 04 Oct, 2018 24 commits
-
-
Greg Kroah-Hartman authored
-
Sakari Ailus authored
commit ad608fbc upstream. The event subscriptions are added to the subscribed event list while holding a spinlock, but that lock is subsequently released while still accessing the subscription object. This makes it possible to unsubscribe the event --- and freeing the subscription object's memory --- while the subscription object is simultaneously accessed. Prevent this by adding a mutex to serialise the event subscription and unsubscription. This also gives a guarantee to the callback ops that the add op has returned before the del op is called. This change also results in making the elems field less special: subscriptions are only added to the event list once they are fully initialised. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org # for 4.14 and up Fixes: c3b5b024 ("V4L/DVB: V4L: Events: Add backend") Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Marc Zyngier authored
commit 2a3f9345 upstream. Not all execution modes are valid for a guest, and some of them depend on what the HW actually supports. Let's verify that what userspace provides is compatible with both the VM settings and the HW capabilities. Cc: <stable@vger.kernel.org> Fixes: 0d854a60 ("arm64: KVM: enable initialization of a 32bit vcpu") Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Reviewed-by:
Dave Martin <Dave.Martin@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Mika Westerberg authored
[ Upstream commit 7fd6d98b ] Commit 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") made it possible for AML code to access SMBus I/O ports by installing custom SystemIO OpRegion handler and blocking i80i driver access upon first AML read/write to this OpRegion. However, while ThinkPad T560 does have SystemIO OpRegion declared under the SMBus device, it does not access any of the SMBus registers: Device (SMBU) { ... OperationRegion (SMBP, PCI_Config, 0x50, 0x04) Field (SMBP, DWordAcc, NoLock, Preserve) { , 5, TCOB, 11, Offset (0x04) } Name (TCBV, 0x00) Method (TCBS, 0, NotSerialized) { If ((TCBV == 0x00)) { TCBV = (\_SB.PCI0.SMBU.TCOB << 0x05) } Return (TCBV) /* \_SB_.PCI0.SMBU.TCBV */ } OperationRegion (TCBA, SystemIO, TCBS (), 0x10) Field (TCBA, ByteAcc, NoLock, Preserve) { Offset (0x04), , 9, CPSC, 1 } } Problem with the current approach is that it blocks all I/O port access and because this system has touchpad connected to the SMBus controller after first AML access (happens during suspend/resume cycle) the touchpad fails to work anymore. Fix this so that we allow ACPI AML I/O port access if it does not touch the region reserved for the SMBus. Fixes: 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200737Reported-by:
Yussuf Khalil <dev@pp3345.net> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 755a8bf5 ] If someone has the silly idea to write something along those lines: extern u64 foo(void); void bar(struct arm_smccc_res *res) { arm_smccc_1_1_smc(0xbad, foo(), res); } they are in for a surprise, as this gets compiled as: 0000000000000588 <bar>: 588: a9be7bfd stp x29, x30, [sp, #-32]! 58c: 910003fd mov x29, sp 590: f9000bf3 str x19, [sp, #16] 594: aa0003f3 mov x19, x0 598: aa1e03e0 mov x0, x30 59c: 94000000 bl 0 <_mcount> 5a0: 94000000 bl 0 <foo> 5a4: aa0003e1 mov x1, x0 5a8: d4000003 smc #0x0 5ac: b4000073 cbz x19, 5b8 <bar+0x30> 5b0: a9000660 stp x0, x1, [x19] 5b4: a9010e62 stp x2, x3, [x19, #16] 5b8: f9400bf3 ldr x19, [sp, #16] 5bc: a8c27bfd ldp x29, x30, [sp], #32 5c0: d65f03c0 ret 5c4: d503201f nop The call to foo "overwrites" the x0 register for the return value, and we end up calling the wrong secure service. A solution is to evaluate all the parameters before assigning anything to specific registers, leading to the expected result: 0000000000000588 <bar>: 588: a9be7bfd stp x29, x30, [sp, #-32]! 58c: 910003fd mov x29, sp 590: f9000bf3 str x19, [sp, #16] 594: aa0003f3 mov x19, x0 598: aa1e03e0 mov x0, x30 59c: 94000000 bl 0 <_mcount> 5a0: 94000000 bl 0 <foo> 5a4: aa0003e1 mov x1, x0 5a8: d28175a0 mov x0, #0xbad 5ac: d4000003 smc #0x0 5b0: b4000073 cbz x19, 5bc <bar+0x34> 5b4: a9000660 stp x0, x1, [x19] 5b8: a9010e62 stp x2, x3, [x19, #16] 5bc: f9400bf3 ldr x19, [sp, #16] 5c0: a8c27bfd ldp x29, x30, [sp], #32 5c4: d65f03c0 ret Reported-by:
Julien Grall <julien.grall@arm.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 1d8f5747 ] An unfortunate consequence of having a strong typing for the input values to the SMC call is that it also affects the type of the return values, limiting r0 to 32 bits and r{1,2,3} to whatever was passed as an input. Let's turn everything into "unsigned long", which satisfies the requirements of both architectures, and allows for the full range of return values. Reported-by:
-
Rex Zhu authored
[ Upstream commit 2ab4d0e7 ] For SI/Kv, the power state is managed by function amdgpu_pm_compute_clocks. when dpm enabled, we should call amdgpu_pm_compute_clocks to update current power state instand of set boot state. this change can fix the oops when kfd driver was enabled on Kv. Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Tested-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Rex Zhu authored
[ Upstream commit 8ef23364 ] This is required by gfx hw and can fix the rlc hang when do s3 stree test on Cz/St. Reviewed-by:
Hang Zhou <hang.zhou@amd.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit f196dec6 ] The adt7475_read_word() function was meant to return negative error codes on failure. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Tokunori Ikegami <ikegami@allied-telesis.co.jp> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Lothar Felten authored
[ Upstream commit 3ad86700 ] fix the sysfs shunt resistor read access: return the shunt resistor value, not the calibration register contents. update email address Signed-off-by:
Lothar Felten <lothar.felten@gmail.com> Signed-off-by:
-
Bo Chen authored
[ Upstream commit ee400a3f ] In 'e1000_set_ringparam()', the tx_ring and rx_ring are updated with new value and the old tx/rx rings are freed only when the device is up. There are resource leaks on old tx/rx rings when the device is not up. This bug is reported by COD, a tool for testing kernel module binaries I am building. This patch fixes the bug by always calling 'kfree()' on old tx/rx rings in 'e1000_set_ringparam()'. Signed-off-by:
Bo Chen <chenbo@pdx.edu> Reviewed-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Bo Chen authored
[ Upstream commit cf1acec0 ] When the device is not up, the call to 'e1000_up()' from the error handling path of 'e1000_set_ringparam()' causes a kernel oops with a null-pointer dereference. The null-pointer dereference is triggered in function 'e1000_alloc_rx_buffers()' at line 'buffer_info = &rx_ring->buffer_info[i]'. This bug was reported by COD, a tool for testing kernel module binaries I am building. This bug was also detected by KFI from Dr. Kai Cong. This patch fixes the bug by checking on 'netif_running()' before calling 'e1000_up()' in 'e1000_set_ringparam()'. Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit b1ccd4c0 ] skb->truesize is not meant to be tracking amount of used bytes in a skb, but amount of reserved/consumed bytes in memory. For instance, if we use a single byte in last page fragment, we have to account the full size of the fragment. So skb_add_rx_frag needs to calculate the length of the entire buffer into turesize. Fixes: 9cbe9fd5 ("net: hns: optimize XGE capability by reducing cpu usage") Signed-off-by:
Huazhong tan <tanhuazhong@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit 3ed614dc ] When enable the config item "CONFIG_ARM64_64K_PAGES", the size of PAGE_SIZE is 65536(64K). But the type of length and page_offset are u16, they will overflow. So change them to u32. Fixes: 6fe6611f ("net: add Hisilicon Network Subsystem hnae framework support") Signed-off-by:
-
Anson Huang authored
[ Upstream commit 152395fd ] When thermal zone is in passive mode, disabling its mode from sysfs is NOT taking effect at all, it is still polling the temperature of the disabled thermal zone and handling all thermal trips, it makes user confused. The disabling operation should disable the thermal zone behavior completely, for both active and passive mode, this patch clears the passive_delay when thermal zone is disabled and restores it when it is enabled. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Tomer Tayar authored
[ Upstream commit 76271809 ] Successive iterations of halting and resuming the management chip (MCP) might fail, since currently the driver doesn't wait for these operations to actually take place. This patch prevents the driver from moving forward before the operations are reflected in the state register. Signed-off-by:
Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
-
Tomer Tayar authored
[ Upstream commit f00d25f3 ] The MFW might be reset and re-update its shared memory. Upon the detection of such a reset the driver rereads this memory, but it has to wait till the data is valid. This patch adds the missing wait for a data ready indication. Signed-off-by:
-
Theodore Ts'o authored
commit 8cdb5240 upstream. When expanding the extra isize space, we must never move the system.data xattr out of the inode body. For performance reasons, it doesn't make any sense, and the inline data implementation assumes that system.data xattr is never in the external xattr block. This addresses CVE-2018-10880 https://bugzilla.kernel.org/show_bug.cgi?id=200005Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org [groeck: Context changes] Signed-off-by:
-
Dave Martin authored
commit d26c25a9 upstream. We currently allow userspace to access the core register file in about any possible way, including straddling multiple registers and doing unaligned accesses. This is not the expected use of the ABI, and nobody is actually using it that way. Let's tighten it by explicitly checking the size and alignment for each field of the register file. Cc: <stable@vger.kernel.org> Fixes: 2f4a07c5 ("arm64: KVM: guest one-reg interface") Reviewed-by:
-
Ira Weiny authored
commit 0dbfaa9f upstream. The SL specified by a user needs to be a valid SL. Add a range check to the user specified SL value which protects from running off the end of the SL to SC table. CC: stable@vger.kernel.org Fixes: 77241056 ("IB/hfi1: add driver files") Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Uwe Kleine-König authored
commit 7e620984 upstream. Back in 2015 when irda was dropped from the driver imx1 was broken. This change reintroduces the support for the third interrupt of the UART. Fixes: afe9cbb1 ("serial: imx: drop support for IRDA") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by:
-
Vincent Pelletier authored
commit 8c39e269 upstream. Signed-off-by:
Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> [plr.vincent@gmail.com: hunk context change for 4.4 and 4.9, no code change] Signed-off-by:
-
Michael J. Ruhl authored
commit d623500b upstream. If a packet stream uses an UnsupportedVL (virtual lane), the send engine will not send the packet, and it will not indicate that an error has occurred. This will cause the packet stream to block. HFI has 8 virtual lanes available for packet streams. Each lane can be enabled or disabled using the UnsupportedVL mask. If a lane is disabled, adding a packet to the send context must be disallowed. The current mask for determining unsupported VLs defaults to 0 (allow all). This is incorrect. Only the VLs that are defined should be allowed. Determine which VLs are disabled (mtu == 0), and set the appropriate unsupported bit in the mask. The correct mask will allow the send engine to error on the invalid VL, and error recovery will work correctly. Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 77241056 ("IB/hfi1: add driver files") Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Lukasz Odzioba <lukasz.odzioba@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
commit 94694d18 upstream. If the number of packets in a user sdma request does not match the actual iovectors being sent, sdma_cleanup can be called on an uninitialized request structure, resulting in a crash similar to this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] PGD 8000001044f61067 PUD 1052706067 PMD 0 Oops: 0000 [#1] SMP CPU: 30 PID: 69912 Comm: upsm Kdump: loaded Tainted: G OE ------------ 3.10.0-862.el7.x86_64 #1 Hardware name: Intel Corporation S2600KPR/S2600KPR, BIOS SE5C610.86B.01.01.0019.101220160604 10/12/2016 task: ffff8b331c890000 ti: ffff8b2ed1f98000 task.ti: ffff8b2ed1f98000 RIP: 0010:[<ffffffffc0ae8bb7>] [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] RSP: 0018:ffff8b2ed1f9bab0 EFLAGS: 00010286 RAX: 0000000000008b2b RBX: ffff8b2adf6e0000 RCX: 0000000000000000 RDX: 00000000000000a0 RSI: ffff8b2e9eedc540 RDI: ffff8b2adf6e0000 RBP: ffff8b2ed1f9bad8 R08: 0000000000000000 R09: ffffffffc0b04a06 R10: ffff8b331c890190 R11: ffffe6ed00bf1840 R12: ffff8b3315480000 R13: ffff8b33154800f0 R14: 00000000fffffff2 R15: ffff8b2e9eedc540 FS: 00007f035ac47740(0000) GS:ffff8b331e100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000c03fe6000 CR4: 00000000001607e0 Call Trace: [<ffffffffc0b0570d>] user_sdma_send_pkts+0xdcd/0x1990 [hfi1] [<ffffffff9fe75fb0>] ? gup_pud_range+0x140/0x290 [<ffffffffc0ad3105>] ? hfi1_mmu_rb_insert+0x155/0x1b0 [hfi1] [<ffffffffc0b0777b>] hfi1_user_sdma_process_request+0xc5b/0x11b0 [hfi1] [<ffffffffc0ac193a>] hfi1_aio_write+0xba/0x110 [hfi1] [<ffffffffa001a2bb>] do_sync_readv_writev+0x7b/0xd0 [<ffffffffa001bede>] do_readv_writev+0xce/0x260 [<ffffffffa022b089>] ? tty_ldisc_deref+0x19/0x20 [<ffffffffa02268c0>] ? n_tty_ioctl+0xe0/0xe0 [<ffffffffa001c105>] vfs_writev+0x35/0x60 [<ffffffffa001c2bf>] SyS_writev+0x7f/0x110 [<ffffffffa051f7d5>] system_call_fastpath+0x1c/0x21 Code: 06 49 c7 47 18 00 00 00 00 0f 87 89 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 2e 0f 1f 84 00 00 00 00 00 48 8b 4e 10 48 89 fb <48> 8b 51 08 49 89 d4 83 e2 0c 41 81 e4 00 e0 00 00 48 c1 ea 02 RIP [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] RSP <ffff8b2ed1f9bab0> CR2: 0000000000000008 There are two exit points from user_sdma_send_pkts(). One (free_tx) merely frees the slab entry and one (free_txreq) cleans the sdma_txreq prior to freeing the slab entry. The free_txreq variation can only be called after one of the sdma_init*() variations has been called. In the panic case, the slab entry had been allocated but not inited. Fix the issue by exiting through free_tx thus avoiding sdma_clean(). Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 77241056 ("IB/hfi1: add driver files") Reviewed-by:
-
