- 09 Sep, 2016 6 commits
-
-
Mark Rutland authored
When CONFIG_PID_IN_CONTEXTIDR is not selected, we use an empty stub definition of contextidr_thread_switch(). As everything we rely upon exists regardless of CONFIG_PID_IN_CONTEXTIDR, we don't strictly require an empty stub. By using IS_ENABLED() rather than ifdeffery, we avoid duplication, and get compiler coverage on all the code even when CONFIG_PID_IN_CONTEXTIDR is not selected and the code is optimised away. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Mark Rutland authored
A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these across arm64 to make code shorter and clearer. For sequences with a trailing ISB, the existing isb() macro is also used so that asm blocks can be removed entirely. A few uses of inline assembly for msr/mrs are left as-is. Those manipulating sp_el0 for the current thread_info value have special clobber requiremends. Signed-off-by: -
Mark Rutland authored
A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 KVM code to make the code shorter and clearer. At the same time, a comment style violation next to a system register access is fixed up in reset_pmcr, and comments describing whether operations are reads or writes are removed as this is now painfully obvious. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by:Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Mark Rutland authored
A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 DCC accessors to make the code shorter and clearer. Signed-off-by: -
Mark Rutland authored
A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 arch timer accessors to make the code shorter and clearer. Signed-off-by: -
Mark Rutland authored
Currently write_sysreg has to allocate a temporary register to write zero to a system register, which is unfortunate given that the MSR instruction accepts XZR as an operand. Allow XZR to be used when appropriate by fiddling with the assembly constraints. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
- 08 Sep, 2016 1 commit
-
-
Robin Murphy authored
When zeroing an I/O location, the current accessors are forced to allocate a temporary register to store the zero for the write. By tweaking the assembly constraints, we can allow the compiler to use the zero register directly in such cases, and save some juggling. Compiling a representative kernel configuration with GCC 6 shows that 2.3KB worth of code can be wasted just on that! text data bss dec hex filename 13316776 3248256 18176769 34741801 2121e29 vmlinux.o.new 13319140 3248256 18176769 34744165 2122765 vmlinux.o.old Acked-by:
-
- 07 Sep, 2016 2 commits
-
-
Catalin Marinas authored
This patch adds static keys transparently for all the cpu_hwcaps features by implementing an array of default-false static keys and enabling them when detected. The cpus_have_cap() check uses the static keys if the feature being checked is a constant, otherwise the compiler generates the bitmap test. Because of the early call to static_branch_enable() via check_local_cpu_errata() -> update_cpu_capabilities(), the jump labels are initialised in cpuinfo_store_boot_cpu(). Cc: Will Deacon <will.deacon@arm.com> Cc: Suzuki K. Poulose <Suzuki.Poulose@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Catalin Marinas authored
The static key API is currently designed around single variable definitions. There are cases where an array of static keys is desirable, so extend the API to allow this rather than using the internal static key implementation directly. Cc: Jason Baron <jbaron@akamai.com> Cc: Jonathan Corbet <corbet@lwn.net> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Suggested-by:
Dave P Martin <Dave.Martin@arm.com> Signed-off-by:
-
- 06 Sep, 2016 2 commits
-
-
Kefeng Wang authored
There is only fixup_init() in mm.h , and it is only called in free_initmem(), so move the codes from fixup_init() into free_initmem(), then drop fixup_init() and mm.h. Acked-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Marc Zyngier authored
As declared by the chief penguin, and enforced by the NO_IRQ brigade, IRQ0 doesn't exist, and is considered as an error (no irq). Unfortunately, the arm_pmu driver still considers it as valid in a large number of cases. Let's fix this. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
- 05 Sep, 2016 3 commits
-
-
Pratyush Anand authored
Currently, enabling stacktrace of a kprobe events generates warning: echo stacktrace > /sys/kernel/debug/tracing/trace_options echo "p xhci_irq" > /sys/kernel/debug/tracing/kprobe_events echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable save_stack_trace_regs() not implemented yet. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at ../kernel/stacktrace.c:74 save_stack_trace_regs+0x3c/0x48 Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc4-dirty #5128 Hardware name: ARM Juno development board (r1) (DT) task: ffff800975dd1900 task.stack: ffff800975ddc000 PC is at save_stack_trace_regs+0x3c/0x48 LR is at save_stack_trace_regs+0x3c/0x48 pc : [<ffff000008126c64>] lr : [<ffff000008126c64>] pstate: 600003c5 sp : ffff80097ef52c00 Call trace: save_stack_trace_regs+0x3c/0x48 __ftrace_trace_stack+0x168/0x208 trace_buffer_unlock_commit_regs+0x5c/0x7c kprobe_trace_func+0x308/0x3d8 kprobe_dispatcher+0x58/0x60 kprobe_breakpoint_handler+0xbc/0x18c brk_handler+0x50/0x90 do_debug_exception+0x50/0xbc This patch implements save_stack_trace_regs(), so that stacktrace of a kprobe events can be obtained. After this patch, there is no warning and we can see the stacktrace for kprobe events in trace buffer. more /sys/kernel/debug/tracing/trace <idle>-0 [004] d.h. 1356.000496: p_xhci_irq_0:(xhci_irq+0x0/0x9ac) <idle>-0 [004] d.h. 1356.000497: <stack trace> => xhci_irq => __handle_irq_event_percpu => handle_irq_event_percpu => handle_irq_event => handle_fasteoi_irq => generic_handle_irq => __handle_domain_irq => gic_handle_irq => el1_irq => arch_cpu_idle => default_idle_call => cpu_startup_entry => secondary_start_kernel => Tested-by:David A. Long <dave.long@linaro.org> Reviewed-by:
James Morse <james.morse@arm.com> Signed-off-by:
Pratyush Anand <panand@redhat.com> Signed-off-by:
-
Ard Biesheuvel authored
Commit b5fe2429 ("arm64: kernel: fix style issues in sleep.S") changed the linkage of _cpu_resume() to local, even though the symbol is also referenced from hibernate.c. So revert this change. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
James Morse authored
The code that provides /dev/mem uses xlate_dev_mem_{k,}ptr() to avoid making a cachable mapping of a non-cachable area on ia64. On arm64 we do this via phys_mem_access_prot() instead, but provide dummy versions of xlate_dev_mem_{k,}ptr(). These are the same as those in asm-generic/io.h, which we include from asm/io.h Signed-off-by:
-
- 02 Sep, 2016 8 commits
-
-
Will Deacon authored
Single-step traps to userspace (e.g. via ptrace) are expected to use the TRAP_TRACE for the si_code field of the siginfo, as opposed to TRAP_HWBRPT that we report currently. Fix the reported value, which has no effect on existing and legacy builds of GDB. Reported-by:
Yao Qi <yao.qi@arm.com> Signed-off-by:
-
Ard Biesheuvel authored
Now that the only remaining occurrences of the use of callee saved registers are on the primary boot path, add a comment to the code which register is used for what. Reviewed-by:
-
Ard Biesheuvel authored
Instead of stashing the value of the link register in x28 before setting up the stack and calling into C code, create an ordinary PCS compatible stack frame so that we can push the return address onto the stack. Since exception handlers require a stack as well, assign the stack pointer register before installing the vector table. Note that this accounts for the difference between THREAD_START_SP and THREAD_SIZE, given that the stack pointer is always decremented before calling into any C code. Reviewed-by:
-
Ard Biesheuvel authored
Keeping __PHYS_OFFSET in x24 is actually less clear than simply taking the value of __PHYS_OFFSET using an adrp instruction in the three places that we need it. So change that. Reviewed-by:
-
Ard Biesheuvel authored
Using x27 for passing to __enable_mmu what is essentially the return address makes the code look more complicated than it needs to be. So switch to x30/lr, and update the secondary and cpu_resume call sites to simply call __enable_mmu as an ordinary function, with a bl instruction. This requires the callers to be covered by .idmap.text. Reviewed-by:
-
Ard Biesheuvel authored
The KASLR processing is only used by the primary boot path, and complements the processing that takes place in __primary_switch(). Move the two parts together, to make the code easier to understand. Also, fix up a minor whitespace issue. Reviewed-by:
-
Ard Biesheuvel authored
The function el2_setup() passes its return value in register w20, and in the two cases where the caller actually cares about this return value, it is passed into set_cpu_boot_mode_flag() [almost] directly, which expects its input in w20 as well. So there is no reason to use a 'special' callee saved register here, but we can simply follow the PCS for return value and first argument, respectively. Reviewed-by:
-
Ard Biesheuvel authored
This fixes a number of style issues in sleep.S. No functional changes are intended: - replace absolute literal references with relative references in __cpu_suspend_enter(), which executes from its virtual address - replace explicit lr assignment plus branch with bl in cpu_resume(), which aligns it with stext() and secondary_startup() - don't export _cpu_resume() - use adr_l for mpidr_hash reference, and fix the incorrect accompanying comment, which has been out of date since commit cabe1c81 ("arm64: Change cpu_resume() to enable mmu early then access sleep_sp by va") - replace leading spaces with tabs, and add a bit of whitespace for readability Reviewed-by:
-
- 01 Sep, 2016 4 commits
-
-
Vladimir Murzin authored
Commit e19a6ee2 ("arm64: kernel: Save and restore UAO and addr_limit on exception entry") states that exception handler inherits the original PSTATE.UAO value, so UAO needes to be reset explicitly. However, ARM 8.2 Extension documentation says: PSTATE.UAO is copied to SPSR_ELx.UAO and is then set to 0 on an exception taken from AArch64 to AArch64 so hardware already does the right thing. Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Acked-by:
-
Will Deacon authored
The arm64 debug monitor initialisation code uses a CPU hotplug notifier to clear the OS lock when CPUs come online. This patch converts the code to the new hotplug mechanism. Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Will Deacon authored
The arm64 hw_breakpoint implementation uses a CPU hotplug notifier to reset the {break,watch}point registers when CPUs come online. This patch converts the code to the new hotplug mechanism, whilst moving the invocation earlier to remove the need to disable IRQs explicitly in the driver (which could cause havok if we trip a watchpoint in an IRQ handler whilst restoring the debug register state). Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: -
zijun_hu authored
remove duplicate macro __KERNEL__ check Signed-off-by:
zijun_hu <zijun_hu@htc.com> Signed-off-by:
-
- 31 Aug, 2016 7 commits
-
-
Will Deacon authored
When TIF_SINGLESTEP is set for a task, the single-step state machine is enabled and we must take care not to reset it to the active-not-pending state if it is already in the active-pending state. Unfortunately, that's exactly what user_enable_single_step does, by unconditionally setting the SS bit in the SPSR for the current task. This causes failures in the GDB testsuite, where GDB ends up missing expected step traps if the instruction being stepped generates another trap, e.g. PTRACE_EVENT_FORK from an SVC instruction. This patch fixes the problem by preserving the current state of the stepping state machine when TIF_SINGLESTEP is set on the current thread. Cc: <stable@vger.kernel.org> Reported-by:
-
Ard Biesheuvel authored
Expose the arm64_ftr_reg struct covering CTR_EL0 outside of cpufeature.o so that other code can refer to it directly (i.e., without performing the binary search) Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
-
Ard Biesheuvel authored
Constify the arm64_ftr_regs array, by moving the mutable arm64_ftr_reg fields out of the array itself. This also streamlines the bsearch, since the entire array can be covered by fewer cachelines. Moving the payload out of the array also allows us to have special explicitly defined struct instance in case other code needs to refer to it directly. Note that this replaces the runtime sorting of the array with a runtime BUG() check whether the array is sorted correctly in the code. Reviewed-by:
-
Ard Biesheuvel authored
The arm64_ftr_bits structures are never modified, so make them read-only. Reviewed-by:
-
Kefeng Wang authored
The UDBG_UNDEFINED/SYSCALL/BADABORT/SEGV are only used to show verbose user fault messages in arm, not arm64, drop them. Signed-off-by:
-
Kim Phillips authored
Any arm64 based parts that have cache aliasing issues can set it manually. Apparently dragged in from ARM(32) defaults in commit 8c2c3df3 "arm64: Build infrastructure". Signed-off-by:
Kim Phillips <kim.phillips@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Michal Marek authored
The make rpm target depends on proper UTS_MACHINE definition. Also, use the variable in arch/arm64/kernel/setup.c, so that it's not accidentally removed in the future. Reported-and-tested-by:
Fabian Vogt <fvogt@suse.com> Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
- 26 Aug, 2016 5 commits
-
-
Will Deacon authored
Cortex-A53 erratum 843419 is worked around by the linker, although it is a configure-time option to GCC as to whether ld is actually asked to apply the workaround or not. This patch ensures that we pass --fix-cortex-a53-843419 to the linker when both CONFIG_ARM64_ERRATUM_843419=y and the linker supports the option. Acked-by:
-
James Morse authored
Now that we use the MPIDR to resume on the same CPU that we hibernated on, we no longer need to refuse to hibernate if the boot cpu is offline. (Which we can't possibly know if kexec causes logical CPUs to be renumbered). This reverts commit 1fe492ce. Signed-off-by:
-
James Morse authored
disable_nonboot_cpus() assumes that the lowest numbered online CPU is the boot CPU, and that this is the correct CPU to run any power management code on. On arm64 CPU0 can be taken offline. For hibernate/resume this means we may hibernate on a CPU other than CPU0. If the system is rebooted with kexec 'CPU0' will be assigned to a different CPU. This complicates hibernate/resume as now we can't trust the CPU numbers. We currently forbid hibernate if CPU0 has been hotplugged out to avoid this situation without kexec. Save the MPIDR of the CPU we hibernated on in the hibernate arch-header, use hibernate_resume_nonboot_cpu_disable() to direct which CPU we should resume on based on the MPIDR of the CPU we hibernated on. This allows us to hibernate/resume on any CPU, even if the logical numbers have been shuffled by kexec. Signed-off-by:
-
James Morse authored
disable_nonboot_cpus() assumes that the lowest numbered online CPU is the boot CPU, and that this is the correct CPU to run any power management code on. On x86 this is always correct, as CPU0 cannot (easily) by taken offline. On arm64 CPU0 can be taken offline. For hibernate/resume this means we may hibernate on a CPU other than CPU0. If the system is rebooted with kexec 'CPU0' will be assigned to a different physical CPU. This complicates hibernate/resume as now we can't trust the CPU numbers. Arch code can find the correct physical CPU, and ensure it is online before resume from hibernate begins, but also needs to influence disable_nonboot_cpus()s choice of CPU. Rename disable_nonboot_cpus() as freeze_secondary_cpus() and add an argument indicating which CPU should be left standing. Follow the logic in migrate_to_reboot_cpu() to use the lowest numbered online CPU if the requested CPU is not online. Add disable_nonboot_cpus() as an inline function that has the existing behaviour. Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Mark Rutland authored
Follow the example set by x86 in commit 9ccaf77c ("x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option"), and make these protections a fundamental security feature rather than an opt-in. This also results in a minor code simplification. For those rare cases when users wish to disable this protection (e.g. for debugging), this can be done by passing 'rodata=off' on the command line. As DEBUG_RODATA_ALIGN is only intended to address a performance/memory tradeoff, and does not affect correctness, this is left user-selectable. DEBUG_MODULE_RONX is also left user-selectable until the core code provides a boot-time option to disable the protection for debugging use-cases. Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
- 25 Aug, 2016 2 commits
-
-
AKASHI Takahiro authored
Kdump(kexec-tools) parses /proc/iomem to identify all the memory regions on the system. Since the current kernel names "nomap" regions, like UEFI runtime services code/data, as "System RAM," kexec-tools sets up elf core header to include them in a crash dump file (/proc/vmcore). Then crash dump kernel parses UEFI memory map again, re-marks those regions as "nomap" and does not create a memory mapping for them unlike the other areas of System RAM. In this case, copying /proc/vmcore through copy_oldmem_page() on crash dump kernel will end up with a kernel abort, as reported in [1]. This patch names all the "nomap" regions explicitly as "reserved" so that we can exclude them from a crash dump file. acpi_os_ioremap() must also be modified because those regions have WB attributes [2]. Apart from kdump, this change also matches x86's use of acpi (and /proc/iomem). [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-August/448186.html [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-August/450089.htmlReviewed-by:
AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by:
-
James Morse authored
DEBUG_PAGEALLOC removes the valid bit of page table entries to prevent any access to unallocated memory. Hibernate uses this as a hint that those pages don't need to be saved/restored. This patch adds the kernel_page_present() function it uses. hibernate.c copies the resume kernel's linear map for use during restore. Add _copy_pte() to fill-in the holes made by DEBUG_PAGEALLOC in the resume kernel, so we can restore data the original kernel had at these addresses. Finally, DEBUG_PAGEALLOC means the linear-map alias of KERNEL_START to KERNEL_END may have holes in it, so we can't lazily clean this whole area to the PoC. Only clean the new mmuoff region, and the kernel/kvm idmaps. This reverts commit da24eb1f. Reported-by:
-
