- 16 Aug, 2021 13 commits
-
-
Biju Das authored
Fix following sparse warning: sound/soc/sh/rz-ssi.c:156:15: sparse: warning: dereference of noderef expression Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210816132049.28128-1-biju.das.jz@bp.renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge series "ASoC: soc-xxx: cleanup cppcheck warning" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark Now I'm posting audio-graph-card2 patch-set, but it seems it needs longer discussion. Thus I want to post more easy patch first, and reduce my local patches. These are cppcheck warning cleanup patches for soc-xxx. Kuninori Morimoto (9): ASoC: soc-generic-dmaengine-pcm: cleanup cppcheck warning at dmaengine_pcm_hw_params() ASoC: soc-generic-dmaengine-pcm: cleanup cppcheck warning at dmaengine_pcm_new() ASoC: soc-generic-dmaengine-pcm: cleanup cppcheck warning at dmaengine_copy_user() ASoC: soc-dai: cleanup cppcheck warning at snd_soc_dai_link_set_capabilities() ASoC: soc-dai: cleanup cppcheck warning at snd_soc_pcm_dai_new() ASoC: soc-jack: cleanup cppcheck warning at snd_soc_jack_report() ASoC: soc-jack: cleanup cppcheck warning for CONFIG_GPIOLIB ASoC: soc-component: cleanup cppcheck warning at snd_soc_pcm_component_pm_runtime_get() ASoC: soc-ac97: cleanup cppcheck warning sound/soc/soc-ac97.c | 14 ++++++-------- sound/soc/soc-component.c | 4 ++-- sound/soc/soc-dai.c | 18 ++++++++---------- sound/soc/soc-generic-dmaengine-pcm.c | 9 +++------ sound/soc/soc-jack.c | 15 +++++++-------- 5 files changed, 26 insertions(+), 34 deletions(-) -- 2.25.1
-
Aakash Hemadri authored
Prefer `of_device_get_match_data` over `of_match_device` Retrieve OF match data using `of_device_get_match_data`, this is cleaner and better expresses intent. Signed-off-by:
Aakash Hemadri <aakashhemadri123@gmail.com> Acked-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/f4e632e0023d90c43b2b927e752585142a9d9c26.1628971397.git.aakashhemadri123@gmail.comSigned-off-by:
-
Aakash Hemadri authored
Prefer `of_device_get_match_data` over `of_match_device` Retrieve OF match data using `of_device_get_match_data`, this is cleaner and better expresses intent. Signed-off-by:
-
Kuninori Morimoto authored
This patch cleanups below cppcheck warning. sound/soc/soc-ac97.c:41:15: style: struct member 'snd_ac97_gpio_priv::gpios_set' is never used. [unusedStructMember] unsigned int gpios_set; ^ sound/soc/soc-ac97.c:42:28: style: struct member 'snd_ac97_gpio_priv::component' is never used. [unusedStructMember] struct snd_soc_component *component; ^ Signed-off-by:Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87r1euyolk.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
This patch cleanups below cppcheck warning. sound/soc/soc-component.c:1183:9: style: The scope of the variable 'ret' can be reduced. [variableScope] int i, ret; ^ Signed-off-by: -
Kuninori Morimoto authored
This patch cleanups below cppcheck warning. sound/soc/soc-jack.c:21:6: style: struct member 'jack_gpio_tbl::count' is never used. [unusedStructMember] int count; ^ sound/soc/soc-jack.c:23:28: style: struct member 'jack_gpio_tbl::gpios' is never used. [unusedStructMember] struct snd_soc_jack_gpio *gpios; ^ Signed-off-by: -
Kuninori Morimoto authored
This patch cleanups below cppcheck warning. sound/soc/soc-jack.c:45:6: style: The scope of the variable 'enable' can be reduced. [variableScope] int enable; ^ Signed-off-by: -
Kuninori Morimoto authored
This patch cleanups below cppcheck warning. sound/soc/soc-dai.c:553:13: style: Variable 'ret' is assigned a value that is never used. [unreadVariable] int i, ret = 0; ^ Signed-off-by: -
Kuninori Morimoto authored
This patch cleanups below cppcheck warning. sound/soc/soc-dai.c:454:7: style: The scope of the variable 'supported_cpu' can be reduced. [variableScope] bool supported_cpu; ^ sound/soc/soc-dai.c:455:7: style: The scope of the variable 'supported_codec' can be reduced. [variableScope] bool supported_codec; ^ Signed-off-by: -
Kuninori Morimoto authored
This patch cleanups below cppcheck warning. sound/soc/soc-generic-dmaengine-pcm.c:310:6: style: The scope of the variable 'ret' can be reduced. [variableScope] int ret; ^ Signed-off-by: -
Kuninori Morimoto authored
This patch cleanups below cppcheck warning. sound/soc/soc-generic-dmaengine-pcm.c:233:28: style: The scope of the variable 'substream' can be reduced. [variableScope] struct snd_pcm_substream *substream; ^ Signed-off-by: -
Kuninori Morimoto authored
This patch cleanups below cppcheck warning. sound/soc/soc-generic-dmaengine-pcm.c:82:6: style: The scope of the variable 'ret' can be reduced. [variableScope] int ret; ^ Signed-off-by:
-
- 13 Aug, 2021 19 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: boards: use software node API" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This is an update on an earlier contribution from Heikki Krogerus The function device_add_properties() is going to be removed. Replacing it with software node API equivalents. Thanks for Hans de Goede and Andy Shevchenko for their comments, suggestions and Reviewed-by tags on GitHub. The review thread can be found at https://github.com/thesofproject/linux/pull/3041) v3 changes: Fixed nit-picks from Andy: label, return value, missing commas/periods. Added Andy's Reviewed-by tag v2 changes: feedback from Andy and Hans Better error handling Codec reference is kept until the .remove callback Remove bus search to find device v1 changes from Heikki's patches: Avoid the use of devm_ routines for Baytrail machine drivers. Heikki Krogerus (1): ASoC: Intel: boards: use software node API in Atom boards Pierre-Louis Bossart (7): ASoC: Intel: boards: harden codec property handling ASoC: Intel: boards: handle errors with acpi_dev_get_first_match_dev() ASoC: Intel: boards: get codec device with ACPI instead of bus search ASoC: Intel: sof_sdw: pass card information to init/exit functions ASoC: Intel: sof_sdw_rt711*: keep codec device reference until remove ASoC: Intel: use software node API in SoundWire machines ASoC: Intel: remove device_properties for Atom boards sound/soc/intel/boards/bytcht_es8316.c | 31 ++++++++-- sound/soc/intel/boards/bytcr_rt5640.c | 60 +++++++++++++++----- sound/soc/intel/boards/bytcr_rt5651.c | 63 ++++++++++++++------- sound/soc/intel/boards/sof_sdw.c | 20 ++++--- sound/soc/intel/boards/sof_sdw_common.h | 37 +++++++----- sound/soc/intel/boards/sof_sdw_max98373.c | 3 +- sound/soc/intel/boards/sof_sdw_rt1308.c | 3 +- sound/soc/intel/boards/sof_sdw_rt1316.c | 3 +- sound/soc/intel/boards/sof_sdw_rt5682.c | 3 +- sound/soc/intel/boards/sof_sdw_rt700.c | 3 +- sound/soc/intel/boards/sof_sdw_rt711.c | 51 +++++++++-------- sound/soc/intel/boards/sof_sdw_rt711_sdca.c | 52 +++++++++-------- sound/soc/intel/boards/sof_sdw_rt715.c | 3 +- sound/soc/intel/boards/sof_sdw_rt715_sdca.c | 3 +- 14 files changed, 223 insertions(+), 112 deletions(-) -- 2.25.1
-
Mark Brown authored
This patch series aims to add ASoC support on RZ/G2L SoC's. It is based on the work done by Chris Brandt for RZ/A ASoC driver. v4->v5 * Moved validation of sample bits in hw_params * Removed validation of frame bits as it is redundant * split the rz_ssi_start_stop function into rz_ssi_start and rz_ssi_stop. * remove the spin_lock around rz_ssi_stream_init. * Updated dmas description and removed fixes as it is an enhancement now. * updated ssi_start functions with setting fifo thresholds and ssi_stop function with cancel all dma txn. v3->v4: * Updated the subject line as per style for the subsystem. * Removed select SND_SIMPLE_CARD from Kconfig * Added C++ comments for copyright and driver description. * Moved validation of channels in hw_params * removed asm issue reported by bot as well as Mark * replaced master/slave macros with provider/consumer macros * Improved locking and added more null pointer checks. v2->v3: * Fixed the dependency on KCONFIG * Merged the binding patch with dma feature added * Updated dt binding example with encoded #dma-cells value. * Improved Error handling in probe function * Removed the passing legacy channel configuration parameters from dmaengine_slave_config function * started using dma_request_chan instead of deprecated dma_request_slave_channel * Removed SoC dtsi and config patches from this series. Will send it later. v1->v2: * Rebased to latest rc kernel Biju Das (3): ASoC: sh: Add RZ/G2L SSIF-2 driver ASoC: dt-bindings: renesas,rz-ssi: Update slave dma channel configuration parameters ASoC: sh: rz-ssi: Add SSI DMAC support .../bindings/sound/renesas,rz-ssi.yaml | 22 +- sound/soc/sh/Kconfig | 6 + sound/soc/sh/Makefile | 4 + sound/soc/sh/rz-ssi.c | 1063 +++++++++++++++++ 4 files changed, 1093 insertions(+), 2 deletions(-) create mode 100644 sound/soc/sh/rz-ssi.c -- 2.17.1 -
Mark Brown authored
Merge series "ASoC: SOF: Intel: DMI L1 power optimization for HDaudio platforms" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This patchset provides an optimization that result in significant power savings on Intel HDAudio platforms using SOF (Sound Open Firmware). We previously prevented the Intel DSP from enabling the DMI_L1 capability to work-around issues with pause on capture streams. It turns out that this also prevented the platform from entering high C states in full-duplex usages such as videoconferencing - a rather basic use case since the start of the pandemic. The support for pause_push/release was already a bit controversial for Intel platforms, in theory platforms should only enable PAUSE if they can resume on the same sample, which is not the case on any Intel platform. With this patchset, when the user enables DMI L1 via a kernel parameter, the PAUSE support is disabled for capture streams. A kernel parameter is far from ideal but it's a placeholder until we have an API to negotiate capabilities between applications and driver, and it's far less confusing than a Kconfig option. Changes since v1: Removal of SPIB support since it may conflict with Takashi's memalloc changes. These SPIB changes will be provided after rebase. Addition of one cleanup for cppcheck warning Move all changes to intel/ directory, no changes in shared code Flipped the logic: the selection of DMI L1 disables PAUSE Pierre-Louis Bossart (4): ASoC: SOF: Intel: Kconfig: clarify DMI L1 option description ASoC: SOF: Intel: hda-stream: remove always true condition ASoC: SOF: Intel: simplify logic for DMI_L1 handling ASoC: SOF: Intel: make DMI L1 selection more robust sound/soc/sof/intel/Kconfig | 10 ---------- sound/soc/sof/intel/hda-pcm.c | 16 ++++++++++++++-- sound/soc/sof/intel/hda-stream.c | 11 +++++------ 3 files changed, 19 insertions(+), 18 deletions(-) -- 2.25.1
-
Heikki Krogerus authored
The function device_add_properties() is going to be removed. Replacing it with software node API equivalents. Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Co-developed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210813151116.23931-9-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Prepare the transition to the software node API by removing device properties in the probe error handling and .remove callback. Reviewed-by:
-
Pierre-Louis Bossart authored
The function device_add_properties() is going to be removed. Replacing it with software node API equivalents. Reviewed-by:
-
Pierre-Louis Bossart authored
Follow the example of Intel Atom drivers and keep a reference to the headset codec until the properties are removed. There is no guarantee that the module for the codec driver is loaded before the machine driver probe, the use of the deferred probe mechanism is required. Reviewed-by:
-
Pierre-Louis Bossart authored
If we want to handle a context in init/exit function, we have to pass the card information. This will be necessary to better deal with device properties in the follow-up commits. No functional change other than prototype update. Reviewed-by:
-
Pierre-Louis Bossart authored
We have an existing 'adev' handle from which we can find the codec device, no need for an I2C bus search. Suggested-by:
-
Pierre-Louis Bossart authored
acpi_dev_get_first_match_dev() searches for an acpi_handle instantiated by the ACPI table scanning done early during boot. Two of three machine drivers using this search don't deal with errors and the one which does (bytcr_rt5651) returns -ENODEV, which doesn't make sense here: an alternate driver will not be probed. Add consistent error handling and report -ENXIO. Suggested-by:
-
Pierre-Louis Bossart authored
In current ACPI-based devices, the DSDT does not include any of the properties required by the codec driver. This is not an ACPI limitation proper since the _DSD method could be used, as done for Camera and SoundWire in newer platforms. For legacy devices, there is unfortunately no other option than using a work-around: we add properties to the codec device from the machine driver. To avoid any issues with the codec driver being unbound, we need to keep a reference to the codec device until the card is removed. Reviewed-by:
-
Douglas Anderson authored
In commit 772d4452 ("ASoC: rt5682: Properly turn off regulators if wrong device ID") I deleted code but forgot to delete a variable that's now unused. Delete it. Fixes: 772d4452 ("ASoC: rt5682: Properly turn off regulators if wrong device ID") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210813073402.1.Iaa9425cfab80f5233afa78b32d02b6dc23256eb3@changeidSigned-off-by:
-
Biju Das authored
Add SSI DMAC support to RZ/G2L SoC. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210813091156.10700-4-biju.das.jz@bp.renesas.comSigned-off-by:
-
Biju Das authored
The DMAC on RZ/G2L has specific slave channel configuration parameters for SSI. This patch updates the dmas description and example node to include the encoded slave channel configuration. Signed-off-by:
-
Biju Das authored
Add serial sound interface(SSIF-2) driver support for RZ/G2L SoC. Based on the work done by Chris Brandt for RZ/A SSI driver. Signed-off-by:
-
Pierre-Louis Bossart authored
Exposing the DMI L1 configuration as a kernel Kconfig option was in hindsight a really bad idea. It led to several errors reported by distributions which selected it by mistake. The Kconfig is now replaced with a kernel parameter. Since DMI L1 entry is incompatible with pause on a capture stream, the latter is disabled when the kernel parameter is set. Experimental results show an increased residency in higher C states and a significant decrease of system power consumption for "work from home" usages such as VoIP calls. Signed-off-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210812231940.172547-5-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
We don't need to test in multiple places if the kconfig SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1 is enabled or not, we might as well set the existing DMI_L1_COMPATIBLE flag. Signed-off-by:
-
Pierre-Louis Bossart authored
We test if (!stream) and return and later on re-test for stream. The second test is always true. This was detected by cppcheck but only after additional code changes. Signed-off-by:
-
Pierre-Louis Bossart authored
This option is only valid for HDaudio platforms. This was described in the help but not explicit in the option description. Signed-off-by:
-
- 12 Aug, 2021 1 commit
-
-
Douglas Anderson authored
When I booted up on a board that had a slightly different codec stuffed on it, I got this message at bootup: rt5682 9-001a: Device with ID register 6749 is not rt5682 That's normal/expected, but what wasn't normal was the splat that I got after: WARNING: CPU: 7 PID: 176 at drivers/regulator/core.c:2151 _regulator_put+0x150/0x158 pc : _regulator_put+0x150/0x158 ... Call trace: _regulator_put+0x150/0x158 regulator_bulk_free+0x48/0x70 devm_regulator_bulk_release+0x20/0x2c release_nodes+0x1cc/0x244 devres_release_all+0x44/0x60 really_probe+0x17c/0x378 ... This is because the error paths don't turn off the regulator. Let's fix that. Fixes: 0ddce71c ("ASoC: rt5682: add rt5682 codec driver") Fixes: 87b42aba ("ASoC: rt5682: Implement remove callback") Signed-off-by:
-
- 10 Aug, 2021 1 commit
-
-
Jack Yu authored
Fix syntax error in dts-binding document. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Fixes: 064478e4 ("ASoC: dt-bindings: rt1015p: add new compatible id") Link: https://lore.kernel.org/r/20210810020834.32414-1-jack.yu@realtek.comSigned-off-by:
-
- 09 Aug, 2021 6 commits
-
-
Jack Yu authored
Add new compatible ID for rt1015p in dt-bindings document. Signed-off-by:
-
Jack Yu authored
Add new acpi id and compatible id for rt1015p. Signed-off-by:
-
Steve Lee authored
In case of using different type of speaker, support using different dsm parameter bin file for each amp connected. Signed-off-by:
Steve Lee <steves.lee@maximintegrated.com> Link: https://lore.kernel.org/r/20210809142140.9293-1-steves.lee@maximintegrated.comSigned-off-by:
-
Srinivas Kandagatla authored
cppcheck reports below warning. q6adm.c:475]: (style) Variable 'matrix_map' is reassigned a value before the old one has been used. This is due to unnecessary initialization of variable matrix_map, which is now removed as part of this patch. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210809123137.14456-3-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
cppcheck reports below warning. q6asm.c:1631: (style) Variable 'port' is reassigned a value before the old one has been used. This is due to unnecessary initialization of variable port, which is now removed as part of this patch. Signed-off-by:
-
Vincent Knecht authored
This patch adds external codec support on secondary mi2s. It is used for headphones on some devices, eg. alcatel-idol347. Signed-off-by:
Vincent Knecht <vincent.knecht@mailoo.org> Reviewed-by:
-
