- 17 Dec, 2023 16 commits
-
-
Om Prakash Singh authored
Add the QCE and Crypto BAM DMA nodes. Signed-off-by:
Om Prakash Singh <quic_omprsing@quicinc.com> Link: https://lore.kernel.org/r/20231214103600.2613988-3-quic_omprsing@quicinc.comSigned-off-by:
Bjorn Andersson <andersson@kernel.org>
-
Douglas Anderson authored
Pompom has several sources for its panel. Let's switch it to the generic edp-panel compatible string to account for this. This fixes a problem where the panel wouldn't come up on some pompon devices after commit fb3f43d5 ("drm/panel-edp: Avoid adding multiple preferred modes"). Specifically, some models of pompom have a 1920x1080 panel which is _very_ different than the 1366x768 panel specified in the dts. Before the recent panel-edp fix on Linux things kinda/sorta worked because the panel-edp driver would include both the hardcoded and probed mode, AKA: * #0 1920x1080 60.00 1920 1944 1960 2000 1080 1083 1088 1111 133320 flags: nhsync, nvsync; type: preferred, driver * #1 1366x768 60.00 1366 1406 1438 1500 768 773 778 900 81000 flags: nhsync, nvsync; type: preferred, driver ...and, at least on ChromeOS, the userspace was consistently picking the first mode even though both were marked as "preferred". Now that the Linux driver is fixed we only get the hardcoded mode. That means we end up trying to drive a 1920x1080 panel at 1366x768 and it doesn't work so well. Let's switch over to the generic panel-edp. Fixes: fb3f43d5 ("drm/panel-edp: Avoid adding multiple preferred modes") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Acked-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231213163501.1.I8c20f926d15c9ddc12e423e07df1e89db1105d93@changeidSigned-off-by:
-
Johan Hovold authored
The USB SS PHY interrupts need to be provided by the PDC interrupt controller in order to be able to wake the system up from low-power states. Fixes: 0c9dde0d ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes") Fixes: b33d2868 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes") Cc: stable@vger.kernel.org # 5.10 Cc: Jack Pham <quic_jackp@quicinc.com> Cc: Jonathan Marek <jonathan@marek.ca> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Reviewed-by:
-
Johan Hovold authored
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt controller in order to be able to wake the system up from low-power states and to be able to detect disconnect events, which requires triggering on falling edges. A recent commit updated the trigger type but failed to change the interrupt provider as required. This leads to the current Linux driver failing to probe instead of printing an error during suspend and USB wakeup not working as intended. Fixes: 54524b69 ("arm64: dts: qcom: sm8150: fix USB wakeup interrupt types") Fixes: 0c9dde0d ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes") Fixes: b33d2868 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes") Cc: stable@vger.kernel.org # 5.10 Cc: Jack Pham <quic_jackp@quicinc.com> Cc: Jonathan Marek <jonathan@marek.ca> Signed-off-by:
-
Johan Hovold authored
The USB SS PHY interrupts need to be provided by the PDC interrupt controller in order to be able to wake the system up from low-power states. Fixes: ca4db2b5 ("arm64: dts: qcom: sdm845: Add USB-related nodes") Cc: stable@vger.kernel.org # 4.20 Signed-off-by:
-
Johan Hovold authored
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt controller in order to be able to wake the system up from low-power states and to be able to detect disconnect events, which requires triggering on falling edges. A recent commit updated the trigger type but failed to change the interrupt provider as required. This leads to the current Linux driver failing to probe instead of printing an error during suspend and USB wakeup not working as intended. Fixes: 84ad9ac8 ("arm64: dts: qcom: sdm845: fix USB wakeup interrupt types") Fixes: ca4db2b5 ("arm64: dts: qcom: sdm845: Add USB-related nodes") Cc: stable@vger.kernel.org # 4.20 Signed-off-by:
-
Johan Hovold authored
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt controller in order to be able to wake the system up from low-power states and to be able to detect disconnect events, which requires triggering on falling edges. A recent commit updated the trigger type but failed to change the interrupt provider as required. This leads to the current Linux driver failing to probe instead of printing an error during suspend and USB wakeup not working as intended. Fixes: 0dc0f6da ("arm64: dts: qcom: sc8180x: fix USB wakeup interrupt types") Fixes: b080f53a ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes") Cc: stable@vger.kernel.org # 6.5 Cc: Vinod Koul <vkoul@kernel.org> Reported-by:
-
Krzysztof Kozlowski authored
The MCLK clocks of codec macros have fixed 19.2 MHz frequency and assigning clock rates is redundant. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231213162856.188566-5-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Pin configuration for Soundwire bus should be set in Soundwire controller nodes, not in the associated macro codec node. This placement change should not have big impact in general, because macro codec is a clock provider for Soundwire controller, thus its devices is probed first. However it will have impact for disabled Soundwire buses, e.g. WSA2, because after this change the pins will be left in default state. We also follow similar approach in newer SoCs, like Qualcomm SM8650. Signed-off-by:
-
Krzysztof Kozlowski authored
The MCLK clocks of codec macros have fixed 19.2 MHz frequency and assigning clock rates is redundant. Signed-off-by:
-
Krzysztof Kozlowski authored
Pin configuration for Soundwire bus should be set in Soundwire controller nodes, not in the associated macro codec node. This placement change should not have big impact in general, because macro codec is a clock provider for Soundwire controller, thus its devices is probed first. However it will have impact for disabled Soundwire buses, e.g. WSA2, because after this change the pins will be left in default state. We also follow similar approach in newer SoCs, like Qualcomm SM8650. Signed-off-by:
-
Krzysztof Kozlowski authored
The Qualcomm SM8550 RX Soundwire port configuration was taken from downstream sources ("rx_frame_params_default"), but without two ports. Correct the DTS, even though no practical impact was observed. Signed-off-by: -
Krzysztof Kozlowski authored
Review of v1 patch resulting in commit 58872a54 ("arm64: dts: qcom: sm8650: add ADSP audio codec macros") pointed to remove unneeded assigned-clock-rates from macro codecs. One assignment was left in WSA macro codec, so drop it now as it is redundant: these clocks have fixed 19.2 MHz frequency. Signed-off-by:
-
Luca Weiss authored
While applying the original patch, some things got messed up and it didn't apply to the correct section. Move the compatible to the correct location to fix that. Fixes: bfccc195 ("dt-bindings: arm: qcom: Add HTC One Mini 2") Signed-off-by:
Luca Weiss <luca@z3ntu.xyz> Reviewed-by:
-
Konrad Dybcio authored
Add interconnect provider nodes and hook up interconnects to consumer devices, including bwmon. Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/djakov/iccBjorn Andersson authored
Merge the SM6115 interconnect binding to allow referecing the interconnect header files and the ports defined in these.
-
- 16 Dec, 2023 24 commits
-
-
Krzysztof Kozlowski authored
Add dedicated compatible for the SDHCI MMC controller, because usage of generic qcom,sdhci-msm-v4 compatible alone is deprecated. Cc: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by:
-
Mao Jinlong authored
When a node is only one in port or one out port, address-cells and size-cells are not required in in-ports and out-ports. And the number and reg of the port need to be removed. Reviewed-by:
Mao Jinlong <quic_jinlmao@quicinc.com> Link: https://lore.kernel.org/r/20231210072633.4243-5-quic_jinlmao@quicinc.comSigned-off-by:
-
Mao Jinlong authored
out-ports is a required property for coresight ETM. Add out-ports for ETM nodes to fix the warning. Reviewed-by:
-
Mao Jinlong authored
Add the inport of funnel@3023000 to fix 'in-ports' is a required property warning. Reviewed-by:
-
Bartosz Golaszewski authored
Add the Bluetooth node for RB5 as well as its dependencies in the form of the uart6 -> serial1 alias and the pin function for the Bluetooth enable GPIO. Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by:
-
Manivannan Sadhasivam authored
Add missing space between node name and braces to match the style. Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231206135540.17068-4-manivannan.sadhasivam@linaro.orgSigned-off-by:
-
Manivannan Sadhasivam authored
Qcom SoCs doesn't support the legacy PCI, but only PCIe. So use the correct node name for the controller instances. Signed-off-by:
-
Nikita Travkin authored
This laptop has two i2s speakers; an i2s audio codec for the headset jack; two DMIC microphones in the lid and the displayport audio channel. This commit adds the audio node that describes all of the above with the exception of the DMICs that require in-SoC digital codec to be brought up, which will be done later. Note that the displayport channel is connected here for completeness, but the displayport can't be used yet since the HPD signal is created by the embedded controller, which will be added later. Reviewed-by:
Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20231205-aspire1-sound-v2-3-443b7ac0a06f@trvn.ruSigned-off-by:
-
Nikita Travkin authored
When initially added, a mistake was made in the definition of the codec. Despite the fact that the DMIC line is connected on the side of the codec chip, and relevant passive components, including 0-ohm resistors connecting the dmics, are present, the dmic line is still cut in another place on the board, which was overlooked. Correct this by replacing the dmic configuration with a comment describing this hardware detail. While at it, also add missing regulators definitions. This is not a functional change as all the relevant regulators were already added via the other rail supplies. Fixes: 4a9f8f8f ("arm64: dts: qcom: Add Acer Aspire 1") Signed-off-by:
-
Nikita Travkin authored
pm6150 has a read-only RTC that can be used to keep the time with some extra userspace tools. Enable it. Reviewed-by:
-
Dmitry Baryshkov authored
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20231205032552.1583336-10-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Dmitry Baryshkov authored
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by:
-
Dmitry Baryshkov authored
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by:
-
Dmitry Baryshkov authored
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by:
-
Dmitry Baryshkov authored
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by:
-
Dmitry Baryshkov authored
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by:
-
Dmitry Baryshkov authored
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by:
-
Dmitry Baryshkov authored
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by:
-
Dmitry Baryshkov authored
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by:
-
Konrad Dybcio authored
Enable the GPU and provide a path for the ZAP blob. Reviewed-by:
-
Konrad Dybcio authored
Enable the GPU and provide a path for the ZAP blob. Reviewed-by:
-
Konrad Dybcio authored
Enable the GPU and provide a path for the ZAP blob. Reviewed-by:
-
Konrad Dybcio authored
Add the required nodes to support the A740 GPU. Signed-off-by:
-
Konrad Dybcio authored
Add the required nodes to support the A730 GPU. Reviewed-by:
-
