- 12 Jan, 2015 36 commits
-
-
Ying Xue authored
Currently tipc module only allows users sitting on "init_net" namespace to configure it through netlink interface. But now almost each tipc component is able to be aware of net namespace, so it's time to open the permission for users residing in other namespaces, allowing them to configure their own tipc stack instance through netlink interface. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Tested-by:
Tero Aho <Tero.Aho@coriant.com> Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ying Xue authored
After namespace is supported, each namespace should own its private random value. So the global variable representing the random value must be moved to tipc_net structure. Signed-off-by:
-
Ying Xue authored
TIPC establishes one subscriber server which allows users to subscribe their interesting name service status. After tipc supports namespace, one dedicated tipc stack instance is created for each namespace, and each instance can be deemed as one independent TIPC node. As a result, subscriber server must be built for each namespace. Signed-off-by:
-
Ying Xue authored
If net namespace is supported in tipc, each namespace will be treated as a separate tipc node. Therefore, every namespace must own its private tipc node address. This means the "tipc_own_addr" global variable of node address must be moved to tipc_net structure to satisfy the requirement. It's turned out that users also can assign node address for every namespace. Signed-off-by:
-
Ying Xue authored
TIPC name table is used to store the mapping relationship between TIPC service name and socket port ID. When tipc supports namespace, it allows users to publish service names only owned by a certain namespace. Therefore, every namespace must have its private name table to prevent service names published to one namespace from being contaminated by other service names in another namespace. Therefore, The name table global variable (ie, nametbl) and its lock must be moved to tipc_net structure, and a parameter of namespace must be added for necessary functions so that they can obtain name table variable defined in tipc_net structure. Signed-off-by:
-
Ying Xue authored
Now tipc socket table is statically allocated as a global variable. Through it, we can look up one socket instance with port ID, insert a new socket instance to the table, and delete a socket from the table. But when tipc supports net namespace, each namespace must own its specific socket table. So the global variable of socket table must be redefined in tipc_net structure. As a concequence, a new socket table will be allocated when a new namespace is created, and a socket table will be deallocated when namespace is destroyed. Signed-off-by:
-
Ying Xue authored
TIPC broadcast link is statically established and its relevant states are maintained with the global variables: "bcbearer", "bclink" and "bcl". Allowing different namespace to own different broadcast link instances, these variables must be moved to tipc_net structure and broadcast link instances would be allocated and initialized when namespace is created. Signed-off-by:
-
Ying Xue authored
Bearer list defined as a global variable is used to store bearer instances. When tipc supports net namespace, bearers created in one namespace must be isolated with others allocated in other namespaces, which requires us that the bearer list(bearer_list) must be moved to tipc_net structure. As a result, a net namespace pointer has to be passed to functions which access the bearer list. Signed-off-by:
-
Ying Xue authored
Global variables associated with node table are below: - node table list (node_htable) - node hash table list (tipc_node_list) - node table lock (node_list_lock) - node number counter (tipc_num_nodes) - node link number counter (tipc_num_links) To make node table support namespace, above global variables must be moved to tipc_net structure in order to keep secret for different namespaces. As a consequence, these variables are allocated and initialized when namespace is created, and deallocated when namespace is destroyed. After the change, functions associated with these variables have to utilize a namespace pointer to access them. So adding namespace pointer as a parameter of these functions is the major change made in the commit. Signed-off-by:
-
Ying Xue authored
Involve namespace infrastructure, make the "tipc_net_id" global variable aware of per namespace, and rename it to "net_id". In order that the conversion can be successfully done, an instance of networking namespace must be passed to relevant functions, allowing them to access the "net_id" variable of per namespace. Signed-off-by:
-
Ying Xue authored
Signed-off-by:
-
Ying Xue authored
In order to make tipc socket table aware of namespace, a networking namespace instance must be passed to tipc_sk_lookup(), allowing it to look up tipc socket instance with a given port ID from a concrete socket table. However, as now tipc_sk_timeout() only has one port ID parameter and is not namespace aware, it's unable to obtain a correct socket instance through tipc_sk_lookup() just with a port ID, especially after namespace is completely supported. If port ID is replaced with socket instance as tipc_sk_timeout()'s parameter, it's unnecessary to look up socket table. But as the timer handler - tipc_sk_timeout() is run asynchronously, socket reference must be held before its timer is launched, and must be carefully checked to identify whether the socket reference needs to be put or not when its timer is terminated. Signed-off-by:
-
Ying Xue authored
Only the works of initializing and shutting down tipc module are done in core.h and core.c files, so all stuffs which are not closely associated with the two tasks should be moved to appropriate places. Signed-off-by:
-
Ying Xue authored
Not only some wrapper function like k_term_timer() is empty, but also some others including k_start_timer() and k_cancel_timer() don't return back any value to its caller, what's more, there is no any component in the kernel world to do such thing. Therefore, these timer interfaces defined in tipc module should be purged. Signed-off-by:
-
Ying Xue authored
Remove redundant wrapper functions like tipc_core_start() and tipc_core_stop(), and directly move them to their callers, such as tipc_init() and tipc_exit(), having us clearly know what are really done in both initialization and deinitialzation functions. Signed-off-by:
-
Jon Maloy authored
In commit 58dc55f2 ("tipc: use generic SKB list APIs to manage link transmission queue") we replace all list traversal loops with the macros skb_queue_walk() or skb_queue_walk_safe(). While the previous loops were based on the assumption that the list was NULL-terminated, the standard macros stop when the iterator reaches the list head, which is non-NULL. In the function bclink_retransmit_pkt() this macro replacement has lead to a bug. When we receive a BCAST STATE_MSG we unconditionally call the function bclink_retransmit_pkt(), whether there really is anything to retransmit or not, assuming that the sequence number comparisons will lead to the correct behavior. However, if the transmission queue is empty, or if there are no eligible buffers in the transmission queue, we will by mistake pass the list head pointer to the function tipc_link_retransmit(). Since the list head is not a valid sk_buff, this leads to a crash. In this commit we fix this by only calling tipc_link_retransmit() if we actually found eligible buffers in the transmission queue. Reviewed-by:
-
David S. Miller authored
Anish Bhatt says: ==================== All Chelsio drivers : Cleanup CPL messages macros This patch series cleans up all register defines/MACROS defined in t4_msg.h and affected files as part of the continuing cleanup effort The patches series is created against 'net-next' tree and includes patches to the cxgb4, cxgb4vf, iw_cxgb4, cxgb4i and csiostor drivers. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: -
Hariprasad Shenai authored
iw_cxgb4/cxgb4/cxgb4vf/cxgb4i/csiostor: Cleanup register defines/macros related to all other cpl messages This patch cleanups all other macros/register define related to CPL messages that are defined in t4_msg.h and the affected files Signed-off-by:
Anish Bhatt <anish@chelsio.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
This patch cleanups all macros/register define related to connection management CPL messages that are defined in t4_msg.h and the affected files Signed-off-by:
-
Toshiaki Makita authored
Currently a bridge device turns off TSO feature if no bridge ports support it. We can always enable it, since packets can be segmented on ports by software as well as on the bridge device. This will reduce the number of packets processed in the bridge. Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
-
David S. Miller authored
Hayes Wang says: ==================== r8152: adjust r8152_submit_rx v2: Replace the patch #1 with "call rtl_start_rx after netif_carrier_on". For patch #2, replace checking tp->speed with netif_carrier_ok. v1: Avoid r8152_submit_rx() from submitting rx during unexpected moment. This could reduce the time of stopping rx. For patch #1, the tp->speed should be updated early. Then, the patch #2 could use it to check the current linking status. ==================== Signed-off-by: -
hayeswang authored
Don't submit the rx if the device is unplugged, stopped, or linking down. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
hayeswang authored
Remove rtl_start_rx() from rtl_enable() and put it after calling netif_carrier_on(). Signed-off-by:
-
Tom Herbert authored
This patch cleans up the header flags of VXLAN in anticipation of defining some new ones: - Move header related definitions from vxlan.c to vxlan.h - Change VXLAN_FLAGS to be VXLAN_HF_VNI (only currently defined flag) - Move check for unknown flags to after we find vxlan_sock, this assumes that some flags may be processed based on tunnel configuration - Add a comment about why the stack treating unknown set flags as an error instead of ignoring them Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
Willem de Bruijn authored
The expression in ll_header_truncated() tests less than or equal, but the warning prints less than. Update the warning. Reported-by:
Jouni Malinen <jkmalinen@gmail.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Ivan Vecera authored
Move init and deinit of PTP support from open/close functions to probe/remove funcs to avoid removing/re-adding of associated PTP device(s) during ifup/ifdown. v2: tg3_ptp_init call moved to correct place (thx. Prashant) Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Acked-by:
Prashant Sreedharan <prashant@broadcom.com> Signed-off-by:
-
Dan Carpenter authored
devm_ioremap() returns NULL on failure, it doesn't return an ERR_PTR. Fixes: de7b5b3d ('net: eth: xgene: change APM X-Gene SoC platform ethernet to support ACPI') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
-
Praveen Madhavan authored
This patch fixes sparse warning reported by kbuild. Apply this on net-next since it depends on previous commit. drivers/scsi/csiostor/csio_hw.c:259:17: sparse: cast to restricted __le32 drivers/scsi/csiostor/csio_hw.c:536:31: sparse: incorrect type in assignment (different base types) drivers/scsi/csiostor/csio_hw.c:536:31: expected unsigned int [unsigned] [usertype] <noident> drivers/scsi/csiostor/csio_hw.c:536:31: got restricted __be32 [usertype] <noident> >> drivers/scsi/csiostor/csio_hw.c:2012:5: sparse: symbol 'csio_hw_prep_fw' was not declared. Should it be static? Signed-off-by:
Praveen Madhavan <praveenm@chelsio.com> Signed-off-by:
-
Willem de Bruijn authored
A fix to ipv6 structure definitions removed the now superfluous definition of in6_pktinfo in this file. But, use of the glibc definition requires defining _GNU_SOURCE (see also https://sourceware.org/bugzilla/show_bug.cgi?id=6775). Before this change, the following would fail for me: make make headers_install make M=Documentation/networking/timestamping with Documentation/networking/timestamping/txtimestamp.c: In function '__recv_errmsg_cmsg': Documentation/networking/timestamping/txtimestamp.c:205:33: error: dereferencing pointer to incomplete type Documentation/networking/timestamping/txtimestamp.c:206:23: error: dereferencing pointer to incomplete type After this patch compilation succeeded. Fixes: cd91cc5b ("doc: fix the compile error of txtimestamp.c") Signed-off-by:
-
David S. Miller authored
Chunyan Zhang says: ==================== irda: Use ktime_t instead of timeval This patch-set removed all uses of timeval and used ktime_t instead if needed, since 32-bit time types will break in the year 2038. This patch-set also used the ktime_xxx functions accordingly. e.g. * Used ktime_get to get the current time instead of do_gettimeofday. * And, used ktime_us_delta to get the elapsed time directly. ==================== Signed-off-by: -
Chunyan Zhang authored
The vlsi ir driver uses 'timeval', which we try to remove in the kernel because all 32-bit time types will break in the year 2038. This patch also changes do_gettimeofday() to ktime_get() accordingly, since ktime_get returns a ktime_t, but do_gettimeofday returns a struct timeval, and the other reason is that ktime_get() uses the monotonic clock. This patch uses ktime_us_delta to get the elapsed time of microsecond, and uses div_s64_rem to get what seconds & microseconds time elapsed for printing. This patch also changes the function 'vlsi_hard_start_xmit' to do the same things as the others drivers, that is passing the remaining time into udelay() instead of looping until enough time has passed. Signed-off-by:
Chunyan Zhang <zhang.chunyan@linaro.org> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Chunyan Zhang authored
The stir4200 driver uses 'timeval', which we try to remove in the kernel because all 32-bit time types will break in the year 2038. This patch also changes do_gettimeofday() to ktime_get() accordingly, since ktime_get returns a ktime_t, but do_gettimeofday returns a struct timeval, and the other reason is that ktime_get() uses the monotonic clock. This patch uses ktime_us_delta to get the elapsed time of microsecond. Signed-off-by:
-
Chunyan Zhang authored
The nsc ircc driver uses 'timeval', which we try to remove in the kernel because all 32-bit time types will break in the year 2038. This patch also changes do_gettimeofday() to ktime_get() accordingly, since ktime_get returns a ktime_t, but do_gettimeofday returns a struct timeval, and the other reason is that ktime_get() uses the monotonic clock. This patch uses ktime_us_delta to get the elapsed time, and in this way it no longer needs to check for the overflow, because ktime_us_delta returns time difference of microsecond. Signed-off-by:
-
Chunyan Zhang authored
The irda usb driver uses 'timeval', which we try to remove in the kernel because all 32-bit time types will break in the year 2038. This patch also changes do_gettimeofday() to ktime_get() accordingly, since ktime_get returns a ktime_t, but do_gettimeofday returns a struct timeval, and the other reason is that ktime_get() uses the monotonic clock. This patch uses ktime_us_delta to get the elapsed time, and in this way it no longer needs to check for the overflow, because ktime_us_delta returns time difference of microsecond. Signed-off-by:
-
Chunyan Zhang authored
The ali ircc driver uses 'timeval', which we try to remove in the kernel because all 32-bit time types will break in the year 2038. This patch also changes do_gettimeofday() to ktime_get() accordingly, since ktime_get returns a ktime_t, but do_gettimeofday returns a struct timeval, and the other reason is that ktime_get() uses the monotonic clock. This patch uses ktime_us_delta to get the elapsed time, and in this way it no longer needs to check for the overflow, because ktime_us_delta returns time difference of microsecond. Signed-off-by:
-
Chunyan Zhang authored
In the file au1k_ir.c & via-ircc.h, there were two unused definitions of the timeval type members, this commit therefore removes this unneeded code. In other three files, the same problem is the rx_time member is only ever written, never read, so removed it entirely. Signed-off-by:
-
- 11 Jan, 2015 4 commits
-
-
David S. Miller authored
Peter Griffin says: ==================== Fix sti drivers whcih mix reg address spaces A V2 of this old series incorporating Arnd and Lees Feedback form v1. Following on from Arnds comments about the picophy driver here https://lkml.org/lkml/2014/11/13/161, this series fixes the remaining upstreamed drivers for STI, which are mixing address spaces in the reg property. We do this in a way similar to the keystone and bcm7445 platforms, by having sysconfig phandle/ offset pair (where only one register is required). Or phandle / integer array where multiple offsets in the same bank are needed). This series breaks DT compatability! But the platform support is WIP and only being used by the few developers who are upstreaming support for it. I've made each change to the driver / dt doc / dt file as a single atomic commit so the kernel will remain bisectable. This series then also enables the picophy driver, and adds back in the ehci/ohci dt nodes for stih410 which make use of the picophy. ==================== Signed-off-by:
-
Peter Griffin authored
Based on Arnds review comments here https://lkml.org/lkml/2014/11/13/161, we should not be mixing address spaces in the reg property like this driver currently does. This patch updates the driver, dt docs and also the existing dt nodes to pass the sysconfig offset in the syscon dt property. This patch breaks DT compatibility! But this platform is considered WIP, and is only used by a few developers who are upstreaming support for it. This change has been done as a single atomic commit to ensure it is bisectable. Signed-off-by:
Peter Griffin <peter.griffin@linaro.org> Reviewed-by:
-
Peter Griffin authored
This patch enables the picoPHY usb phy which is used by the usb2 and usb3 host controllers when controlling usb2/1.1 devices. It is found in stih407 family SoC's from STMicroelectronics. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Reviewed-by:
-
Peter Griffin authored
This patch adds the DT nodes for the extra ehci and ohci usb controllers on the stih410 SoC. Signed-off-by:
-
