- 08 Mar, 2023 5 commits
-
-
Tomas Henzl authored
Free mrioc->sas_hba.phy at .remove. Fixes: 42fc9fee ("scsi: mpi3mr: Add helper functions to manage device's port") Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230302234336.25456-5-thenzl@redhat.comAcked-by:
Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Tomas Henzl authored
Free mpi3mr_hba_port at .remove. Fixes: 42fc9fee ("scsi: mpi3mr: Add helper functions to manage device's port") Signed-off-by:
-
Tomas Henzl authored
A fix for: DMA-API: pci 0000:83:00.0: device driver has pending DMA allocations while released from device [count=1] Fixes: 32d457d5 ("scsi: mpi3mr: Add framework to issue config requests") Signed-off-by:
-
Tomas Henzl authored
Add a missing kfree(). Fixes: f10af057 ("scsi: mpi3mr: Resource Based Metering") Signed-off-by:
-
Wenchao Hao authored
Port is allocated by sas_port_alloc_num() and rphy is allocated by either sas_end_device_alloc() or sas_expander_alloc(), all of which may return NULL. So we need to check the rphy to avoid possible NULL pointer access. If sas_rphy_add() returned with failure, rphy is set to NULL. We would access the rphy in the following lines which would also result NULL pointer access. Fixes: 78316e9d ("scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()") Signed-off-by:
Wenchao Hao <haowenchao2@huawei.com> Link: https://lore.kernel.org/r/20230225100135.2109330-1-haowenchao2@huawei.comAcked-by:
-
- 06 Mar, 2023 20 commits
-
-
Shin'ichiro Kawasaki authored
When the sd driver revalidates host-managed SMR disks, it calls disk_set_zoned() which changes the zone_write_granularity attribute value to the logical block size regardless of the device type. After that, the sd driver overwrites the value in sd_zbc_read_zone() with the physical block size, since ZBC/ZAC requires this for host-managed disks. Between the calls to disk_set_zoned() and sd_zbc_read_zone(), there exists a window where the attribute shows the logical block size as the zone_write_granularity value, which is wrong for host-managed disks. The duration of the window is from 20ms to 200ms, depending on report zone command execution time. To avoid the wrong zone_write_granularity value between disk_set_zoned() and sd_zbc_read_zone(), modify the value not in sd_zbc_read_zone() but just after disk_set_zoned() call. Fixes: a805a4fa ("block: introduce zone_write_granularity limit") Signed-off-by:
Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20230306063024.3376959-1-shinichiro.kawasaki@wdc.comReviewed-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Michael Kelley authored
Hyper-V uses a VHD or VHDX file on the host as the underlying storage for a virtual disk. The VHD/VHDX file format is a sparse format where real disk space on the host is assigned in chunks that the VHD/VHDX file format calls the BlockSize. This BlockSize is not to be confused with the 512-byte (or 4096-byte) sector size of the underlying storage device. The default block size for a new VHD/VHDX file is 32 Mbytes. When a guest VM touches any disk space within a 32 Mbyte chunk of the VHD/VHDX file, Hyper-V allocates 32 Mbytes of real disk space for that section of the VHD/VHDX. Similarly, if a discard operation is done that covers an entire 32 Mbyte chunk, Hyper-V will free the real disk space for that portion of the VHD/VHDX. This BlockSize is surfaced in Linux as the "discard_granularity" in /sys/block/sd<x>/queue, which makes sense. Hyper-V also has differencing disks that can overlay a VHD/VHDX file to capture changes to the VHD/VHDX while preserving the original VHD/VHDX. One example of this differencing functionality is for VM snapshots. When a snapshot is created, a differencing disk is created. If the snapshot is rolled back, Hyper-V can just delete the differencing disk, and the VM will see the original disk contents at the time the snapshot was taken. Differencing disks are used in other scenarios as well. The BlockSize for a differencing disk defaults to 2 Mbytes, not 32 Mbytes. The smaller default is used because changes to differencing disks are typically scattered all over, and Hyper-V doesn't want to allocate 32 Mbytes of real disk space for a stray write here or there. The smaller BlockSize provides more efficient use of real disk space. When a differencing disk is added to a VHD/VHDX, Hyper-V reports UNIT_ATTENTION with a sense code indicating "Operating parameters have changed", because the value of discard_granularity should be changed to 2 Mbytes. When the differencing disk is removed, discard_granularity should be changed back to 32 Mbytes. However, current code simply reports a message from scsi_report_sense() and the value of /sys/block/sd<x>/queue/discard_granularity is not updated. The message isn't very actionable by a sysadmin. Fix this by having the storvsc driver check for the sense code indicating that the underly VHD/VHDX block size has changed, and do a rescan of the device to pick up the new discard_granularity. With this change the entire transition to/from differencing disks is handled automatically and transparently, with no confusing messages being output. Link: https://lore.kernel.org/r/1677516514-86060-1-git-send-email-mikelley@microsoft.comSigned-off-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
-
Chandrakanth Patil authored
Update driver version. Signed-off-by:
Chandrakanth Patil <chandrakanth.patil@broadcom.com> Link: https://lore.kernel.org/r/20230302105342.34933-4-chandrakanth.patil@broadcom.comSigned-off-by:
-
Chandrakanth Patil authored
In kdump kernel mode, the driver works in reduced functionality mode with some features disabled such as reduced MSI-X count and RDPQ disabled, etc. However, the firmware is not aware of this mode in some cases, which results in undefined behavior. To address this, the driver informs the firmware about the kdump mode through MPI capabilities bit during driver initialization. This allows firmware to adjust its behavior accordingly. Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Link: https://lore.kernel.org/r/20230302105342.34933-3-chandrakanth.patil@broadcom.comSigned-off-by:
-
Chandrakanth Patil authored
The firmware only supports Logical Disk IDs up to 240 and LD ID 255 (0xFF) is reserved for deleted LDs. However, in some cases, firmware was assigning LD ID 254 (0xFE) to deleted LDs and this was causing the driver to mark the wrong disk as deleted. This in turn caused the wrong disk device to be taken offline by the SCSI midlayer. To address this issue, limit the LD ID range from 255 to 240. This ensures the deleted LD ID is properly identified and removed by the driver without accidently deleting any valid LDs. Fixes: ae6874ba ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update") Reported-by:
-
Ranjan Kumar authored
When the SAS Transport Layer support is enabled and a device exposed to the OS by the driver fails INQUIRY commands, the driver frees up the memory allocated for an internal HBA port data structure. However, in some places, the reference to the freed memory is not cleared. When the firmware sends the Device Info change event for the same device again, the freed memory is accessed and that leads to memory corruption and OS crash. Signed-off-by:
Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-7-ranjan.kumar@broadcom.comSigned-off-by:
-
Ranjan Kumar authored
A wrong variable is checked while populating PRP entries in the PRP page and this results in failure. No PRP entries in the PRP page were successfully created and any NVMe Encapsulated commands with PRP of size greater than 8K failed. Signed-off-by:
-
Ranjan Kumar authored
Return proper non-zero return values for all the cases when the controller initialization and re-initialization fails. Signed-off-by:
-
Ranjan Kumar authored
If a controller reset operation is triggered to recover the controller from a fault state, then wait for the snapdump to be saved in the firmware region before proceeding to reset the controller. Signed-off-by:
-
Ranjan Kumar authored
Prevent driver from trying to dereference a NULL pointer in a debug print while removing a device during driver unload. Signed-off-by:
-
Ranjan Kumar authored
As part of Task Management handling, the driver will disable and enable the MSIx index zero which belongs to the Admin reply queue. During this transition the driver loses some interrupts and this leads to Admin request and ioctl timeouts. After enabling the interrupts, poll the Admin reply queue to avoid timeouts. Signed-off-by:
-
Jakob Koschel authored
If the &epd_pool->list is empty when executing lpfc_get_io_buf_from_expedite_pool() the function would return an invalid pointer. Even in the case if the list is guaranteed to be populated, the iterator variable should not be used after the loop to be more robust for future changes. Linus proposed to avoid any use of the list iterator variable after the loop, in the attempt to move the list iterator variable declaration into the macro to avoid any potential misuse after the loop [1]. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by:
Jakob Koschel <jkl820.git@gmail.com> Link: https://lore.kernel.org/r/20230301-scsi-lpfc-avoid-list-iterator-after-loop-v1-1-325578ae7561@gmail.comReviewed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
-
Justin Tee authored
If kzalloc() fails in lpfc_sli4_cgn_params_read(), then we rely on lpfc_read_object()'s routine to NULL check pdata. Currently, an early return error is thrown from lpfc_read_object() to protect us from NULL ptr dereference, but the errno code is -ENODEV. Change the errno code to a more appropriate -ENOMEM. Reported-by:
Kang Chen <void0red@gmail.com> Link: https://lore.kernel.org/all/20230226102338.3362585-1-void0red@gmail.comSigned-off-by:
-
Asutosh Das authored
Smatch static checker reported: drivers/ufs/host/ufs-qcom.c:1469 ufs_qcom_mcq_config_resource() info: returning a literal zero is cleaner Fix the above warning by returning in place instead of a jump to a label. Also remove the usage of devm_kfree() as it's unnecessary in this function. Fixes: c263b4ef ("scsi: ufs: core: mcq: Configure resource regions") Reported-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Asutosh Das <quic_asutoshd@quicinc.com> Link: https://lore.kernel.org/r/3ebd2582af74b81ef7b57149f57c6a3bf0963953.1677721229.git.quic_asutoshd@quicinc.comReviewed-by:
Bjorn Andersson <andersson@kernel.org> Reviewed-by:
Manivannan Sadhasivam <mani@kernel.org> Signed-off-by:
-
Asutosh Das authored
Fix an error case in ufs_qcom_mcq_config_resource(), where the return value is set to 0 before passing it to PTR_ERR. This led to Smatch warning: drivers/ufs/host/ufs-qcom.c:1455 ufs_qcom_mcq_config_resource() warn: passing zero to 'PTR_ERR' Fixes: c263b4ef ("scsi: ufs: core: mcq: Configure resource regions") Reported-by:
-
Dan Carpenter authored
The "dev_req_params" pointer points to inside the middle of a struct so it can't be NULL. Removing this impossible condition is nice because now we don't need to consider the correct error code for that situation. Link: https://lore.kernel.org/r/Y/yA3niWUcGYgBU8@kili Fixes: f06fcc71 ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations") Signed-off-by:
-
Adrien Thierry authored
The ufshcd driver uses simpleondemand governor for devfreq. Add it to the list of ufshcd softdeps to allow userspace initramfs tools like dracut to automatically pull the governor module into the initramfs together with UFS drivers. Link: https://lore.kernel.org/r/20230220140740.14379-1-athierry@redhat.comSigned-off-by:
Adrien Thierry <athierry@redhat.com> Signed-off-by:
-
Kang Chen authored
In case devm_add_action() fails, check it in the caller of interrupt_preinit_v3_hw(). Link: https://lore.kernel.org/r/20230227031030.893324-1-void0red@gmail.comSigned-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
-
Daniel Wagner authored
Commit 44c57f20 ("scsi: qla2xxx: Changes to support FCP2 Target") added support for FC2 Targets. Unfortunately, there are older setups which break with this new feature enabled. Allow to disable it via module option. Link: https://lore.kernel.org/r/20230208152014.109214-1-dwagner@suse.deSigned-off-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
-
Maurizio Lombardi authored
The first half of the error message is printed by pr_err(), the second half is printed by pr_debug(). The user will therefore see only the first part of the message and will miss some useful information. Link: https://lore.kernel.org/r/20230214141556.762047-1-mlombard@redhat.comSigned-off-by:
Maurizio Lombardi <mlombard@redhat.com> Reviewed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
- 05 Mar, 2023 9 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit aa47a7c2 ("lib/cpumask: deprecate nr_cpumask_bits") resulted in the cpumask operations potentially becoming hugely less efficient, because suddenly the cpumask was always considered to be variable-sized. The optimization was then later added back in a limited form by commit 6f9c07be ("lib/cpumask: add FORCE_NR_CPUS config option"), but that FORCE_NR_CPUS option is not useful in a generic kernel and more of a special case for embedded situations with fixed hardware. Instead, just re-introduce the optimization, with some changes. Instead of depending on CPUMASK_OFFSTACK being false, and then always using the full constant cpumask width, this introduces three different cpumask "sizes": - the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids. This is used for situations where we should use the exact size. - the "small" size (small_cpumask_bits) is the NR_CPUS constant if it fits in a single word and the bitmap operations thus end up able to trigger the "small_const_nbits()" optimizations. This is used for the operations that have optimized single-word cases that get inlined, notably the bit find and scanning functions. - the "large" size (large_cpumask_bits) is the NR_CPUS constant if it is an sufficiently small constant that makes simple "copy" and "clear" operations more efficient. This is arbitrarily set at four words or less. As a an example of this situation, without this fixed size optimization, cpumask_clear() will generate code like movl nr_cpu_ids(%rip), %edx addq $63, %rdx shrq $3, %rdx andl $-8, %edx callq memset@PLT on x86-64, because it would calculate the "exact" number of longwords that need to be cleared. In contrast, with this patch, using a MAX_CPU of 64 (which is quite a reasonable value to use), the above becomes a single movq $0,cpumask instruction instead, because instead of caring to figure out exactly how many CPU's the system has, it just knows that the cpumask will be a single word and can just clear it all. Note that this does end up tightening the rules a bit from the original version in another way: operations that set bits in the cpumask are now limited to the actual nr_cpu_ids limit, whereas we used to do the nr_cpumask_bits thing almost everywhere in the cpumask code. But if you just clear bits, or scan for bits, we can use the simpler compile-time constants. In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()' which were not useful, and which fundamentally have to be limited to 'nr_cpu_ids'. Better remove them now than have somebody introduce use of them later. Of course, on x86-64 with MAXSMP there is no sane small compile-time constant for the cpumask sizes, and we end up using the actual CPU bits, and will generate the above kind of horrors regardless. Please don't use MAXSMP unless you really expect to have machines with thousands of cores. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "Fix a regression in the caam driver" * tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - Fix edesc/iv ordering mixup
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 updates from Thomas Gleixner: "A small set of updates for x86: - Return -EIO instead of success when the certificate buffer for SEV guests is not large enough - Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared on return to userspace for performance reasons, but the leaves user space vulnerable to cross-thread attacks which STIBP prevents. Update the documentation accordingly" * tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: virt/sev-guest: Return -EIO if certificate buffer is not large enough Documentation/hw-vuln: Document the interaction between IBRS and STIBP x86/speculation: Allow enabling STIBP with legacy IBRS -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "A set of updates for the interrupt susbsystem: - Prevent possible NULL pointer derefences in irq_data_get_affinity_mask() and irq_domain_create_hierarchy() - Take the per device MSI lock before invoking code which relies on it being hold - Make sure that MSI descriptors are unreferenced before freeing them. This was overlooked when the platform MSI code was converted to use core infrastructure and results in a fals positive warning - Remove dead code in the MSI subsystem - Clarify the documentation for pci_msix_free_irq() - More kobj_type constification" * tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced genirq/msi: Drop dead domain name assignment irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy() genirq/irqdesc: Make kobj_type structures constant PCI/MSI: Clarify usage of pci_msix_free_irq() genirq/msi: Take the per-device MSI lock before validating the control structure genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask() -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs update from Al Viro: "Adding Christian Brauner as VFS co-maintainer" * tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Adding VFS co-maintainer
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull VM_FAULT_RETRY fixes from Al Viro: "Some of the page fault handlers do not deal with the following case correctly: - handle_mm_fault() has returned VM_FAULT_RETRY - there is a pending fatal signal - fault had happened in kernel mode Correct action in such case is not "return unconditionally" - fatal signals are handled only upon return to userland and something like copy_to_user() would end up retrying the faulting instruction and triggering the same fault again and again. What we need to do in such case is to make the caller to treat that as failed uaccess attempt - handle exception if there is an exception handler for faulting instruction or oops if there isn't one. Over the years some architectures had been fixed and now are handling that case properly; some still do not. This series should fix the remaining ones. Status: - m68k, riscv, hexagon, parisc: tested/acked by maintainers. - alpha, sparc32, sparc64: tested locally - bug has been reproduced on the unpatched kernel and verified to be fixed by this series. - ia64, microblaze, nios2, openrisc: build, but otherwise completely untested" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: openrisc: fix livelock in uaccess nios2: fix livelock in uaccess microblaze: fix livelock in uaccess ia64: fix livelock in uaccess sparc: fix livelock in uaccess alpha: fix livelock in uaccess parisc: fix livelock in uaccess hexagon: fix livelock in uaccess riscv: fix livelock in uaccess m68k: fix livelock in uaccess -
Masahiro Yamada authored
include/linux/compiler-intel.h had no update in the past 3 years. We often forget about the third C compiler to build the kernel. For example, commit a0a12c3e ("asm goto: eradicate CC_HAS_ASM_GOTO") only mentioned GCC and Clang. init/Kconfig defines CC_IS_GCC and CC_IS_CLANG but not CC_IS_ICC, and nobody has reported any issue. I guess the Intel Compiler support is broken, and nobody is caring about it. Harald Arnesen pointed out ICC (classic Intel C/C++ compiler) is deprecated: $ icc -v icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is deprecated and will be removed from product release in the second half of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended compiler moving forward. Please transition to use this compiler. Use '-diag-disable=10441' to disable this message. icc version 2021.7.0 (gcc version 12.1.0 compatibility) Arnd Bergmann provided a link to the article, "Intel C/C++ compilers complete adoption of LLVM". lib/zstd/common/compiler.h and lib/zstd/compress/zstd_fast.c were kept untouched for better sync with https://github.com/facebook/zstd Link: https://www.intel.com/content/www/us/en/developer/articles/technical/adoption-of-llvm-complete-icx.htmlSigned-off-by:
Masahiro Yamada <masahiroy@kernel.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Miguel Ojeda <ojeda@kernel.org> Signed-off-by:
-
Al Viro authored
Acked-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
- 04 Mar, 2023 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull more i2c updates from Wolfram Sang: "Some improvements/fixes for the newly added GXP driver and a Kconfig dependency fix" * tag 'i2c-for-6.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: gxp: fix an error code in probe i2c: gxp: return proper error on address NACK i2c: gxp: remove "empty" switch statement i2c: Disable I2C_APPLE when I2C_PASEMI is a builtin
-
Linus Torvalds authored
The migration code ends up temporarily stashing information of the wrong type in unused fields of the newly allocated destination folio. That all works fine, but gcc does complain about the pointer type mis-use: mm/migrate.c: In function ‘__migrate_folio_extract’: mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’ 1050 | *anon_vmap = (void *)dst->mapping; | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ and gcc is actually right to complain since it really doesn't understand that this is a very temporary special case where this is ok. This could be fixed in different ways by just obfuscating the assignment sufficiently that gcc doesn't see what is going on, but the truly "proper C" way to do this is by explicitly using a union. Using unions for type conversions like this is normally hugely ugly and syntactically nasty, but this really is one of the few cases where we want to make it clear that we're not doing type conversion, we're really re-using the value bit-for-bit just using another type. IOW, this should not become a common pattern, but in this one case using that odd union is probably the best way to document to the compiler what is conceptually going on here. [ Side note: there are valid cases where we convert pointers to other pointer types, notably the whole "folio vs page" situation, where the types actually have fundamental commonalities. The fact that the gcc note is limited to just randomized structures means that we don't see equivalent warnings for those cases, but it migth also mean that we miss other cases where we do play these kinds of dodgy games, and this kind of explicit conversion might be a good idea. ] I verified that at least for an allmodconfig build on x86-64, this generates the exact same code, apart from line numbers and assembler comment changes. Fixes: 64c8902e ("migrate_pages: split unmap_and_move() to _unmap() and _move()") Cc: Huang, Ying <ying.huang@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: -
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "17 hotfixes. Eight are for MM and seven are for other parts of the kernel. Seven are cc:stable and eight address post-6.3 issues or were judged unsuitable for -stable backporting" * tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: map Dikshita Agarwal's old address to his current one mailmap: map Vikash Garodia's old address to his current one fs/cramfs/inode.c: initialize file_ra_state fs: hfsplus: fix UAF issue in hfsplus_put_super panic: fix the panic_print NMI backtrace setting lib: parser: update documentation for match_NUMBER functions kasan, x86: don't rename memintrinsics in uninstrumented files kasan: test: fix test for new meminstrinsic instrumentation kasan: treat meminstrinsic as builtins in uninstrumented files kasan: emit different calls for instrumentable memintrinsics ocfs2: fix non-auto defrag path not working issue ocfs2: fix defrag path triggering jbd2 ASSERT mailmap: map Georgi Djakov's old Linaro address to his current one mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH mm/damon/paddr: fix missing folio_put() mm/mremap: fix dup_anon_vma() in vma_merge() case 4
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Drop orphaned VAS MAINTAINERS entry - Fix build errors with clang and KCSAN - Avoid build errors seen with LD_DEAD_CODE_DATA_ELIMINATION together with recordmcount Thanks to Nathan Chancellor. * tag 'powerpc-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Avoid dead code/data elimination when using recordmcount powerpc/vmlinux.lds: Add .text.asan/tsan sections powerpc: Drop orphaned VAS MAINTAINERS entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of various small fixes that have been gathered since the last PR. The majority of changes are for ASoC, and there is a small change in ASoC PCM core, but the rest are all for driver- specific fixes / quirks / updates" * tag 'sound-fix-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits) ALSA: ice1712: Delete unreachable code in aureon_add_controls() ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls() ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC ALSA: hda/realtek: Improve support for Dell Precision 3260 ASoC: mediatek: mt8195: add missing initialization ASoC: mediatek: mt8188: add missing initialization ASoC: amd: yc: Add DMI entries to support HP OMEN 16-n0xxx (8A43) ASoC: zl38060 add gpiolib dependency ASoC: sam9g20ek: Disable capture unless building with microphone input ASoC: mt8192: Fix range for sidetone positive gain ASoC: mt8192: Report an error if when an invalid sidetone gain is written ASoC: mt8192: Fix event generation for controls ASoC: mt8192: Remove spammy log messages ASoC: mchp-pdmc: fix poc noise at capture startup ASoC: dt-bindings: sama7g5-pdmc: add microchip,startup-delay-us binding ASoC: soc-pcm: add option to start DMA after DAI ASoC: mt8183: Fix event generation for I2S DAI operations ASoC: mt8183: Remove spammy logging from I2S DAI driver ASoC: mt6358: Remove undefined HPx Mux enumeration values ASoC: mt6358: Validate Wake on Voice 2 writes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull more power supply updates from Sebastian Reichel: - Fix DT binding for Richtek RT9467 - Fix a NULL pointer check in the power-supply core - Document meaning of absent "present" property * tag 'for-v6.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: dt-bindings: power: supply: Revise Richtek RT9467 compatible name ABI: testing: sysfs-class-power: Document absence of "present" property power: supply: fix null pointer check order in __power_supply_register
-
