- 24 Mar, 2020 17 commits
-
-
John Garry authored
Add a function to decide whether a PMU is a core PMU. Signed-off-by:
John Garry <john.garry@huawei.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: James Clark <james.clark@arm.com> Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linuxarm@huawei.com Link: http://lore.kernel.org/lkml/1584442939-8911-6-git-send-email-john.garry@huawei.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
The initial test will verify that the test tables in generated pmu-events.c match against known, expected values. For known events added in pmu-events/arch/test, we need to add an entry in test_cpu_aliases_events[] or test_uncore_events[]. A sample run is as follows for x86: john@linux-3c19:~/linux> tools/perf/perf test -vv 10 10: PMU event aliases : --- start --- test child forked, pid 5316 testing event table bp_l1_btb_correct: pass testing event table bp_l2_btb_correct: pass testing event table segment_reg_loads.any: pass testing event table dispatch_blocked.any: pass testing event table eist_trans: pass testing event table uncore_hisi_ddrc.flux_wcmd: pass testing event table unc_cbo_xsnp_response.miss_eviction: pass test child finished with 0 ---- end ---- PMU event aliases: Ok Signed-off-by:
-
John Garry authored
Create pmu_add_cpu_aliases_map() from pmu_add_cpu_aliases(), so the caller can pass the map; the pmu-events test would use this since there would be no CPUID matching to a mapfile there. Signed-off-by:
-
John Garry authored
With the goal of supporting pmu-events test case, introduce support for a test events folder. These test events can be used for testing generation of pmu-event tables and alias creation for any arch. When running the pmu-events test case, these test events will be used as the platform-agnostic events, so aliases can be created per-PMU and validated against known expected values. To support the test events, add a "testcpu" entry in pmu_events_map[]. The pmu-events test will be able to lookup the events map for "testcpu", to verify the generated tables against expected values. The resultant generated pmu-events.c will now look like the following: struct pmu_event pme_ampere_emag[] = { { .name = "ldrex_spec", .event = "event=0x6c", .desc = "Exclusive operation spe...", .topic = "intrinsic", .long_desc = "Exclusive operation ...", }, ... }; struct pmu_event pme_test_cpu[] = { { .name = "uncore_hisi_ddrc.flux_wcmd", .event = "event=0x2", .desc = "DDRC write commands. Unit: hisi_sccl,ddrc ", .topic = "uncore", .long_desc = "DDRC write commands", .pmu = "hisi_sccl,ddrc", }, { .name = "unc_cbo_xsnp_response.miss_eviction", .event = "umask=0x81,event=0x22", .desc = "Unit: uncore_cbox A cross-core snoop resulted ...", .topic = "uncore", .long_desc = "A cross-core snoop resulted from L3 ...", .pmu = "uncore_cbox", }, { .name = "eist_trans", .event = "umask=0x0,period=200000,event=0x3a", .desc = "Number of Enhanced Intel SpeedStep(R) ...", .topic = "other", }, { .name = 0, }, }; struct pmu_events_map pmu_events_map[] = { ... { .cpuid = "0x00000000500f0000", .version = "v1", .type = "core", .table = pme_ampere_emag }, ... { .cpuid = "testcpu", .version = "v1", .type = "core", .table = pme_test_cpu, }, { .cpuid = 0, .version = 0, .type = 0, .table = 0, }, }; Signed-off-by: -
John Garry authored
Add some test PMU events. The events are randomly chosen from x86 and arm64 JSONs. The events include CPU and uncore events. Signed-off-by:
-
Jiri Olsa authored
Removing the extra 'SUBDIR' line from clean and doc build output. Because it's annoying.. ;-) Before: $ make clean ... SUBDIR Documentation CLEAN Documentation After: $ make clean ... CLEAN Documentation Before: $ make doc BUILD: Doing 'make -j8' parallel build SUBDIR Documentation ASCIIDOC perf-stat.html ... After: $ make doc BUILD: Doing 'make -j8' parallel build ASCIIDOC perf-stat.html ... Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
-
Arnaldo Carvalho de Melo authored
To get the changes in: 26776253 ("seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number") That ends up automatically adding the new IPPROTO_ETHERNET to the socket args beautifiers: $ tools/perf/trace/beauty/socket_ipproto.sh > before Apply this patch: $ tools/perf/trace/beauty/socket_ipproto.sh > after $ diff -u before after --- before 2020-03-19 11:48:36.876673819 -0300 +++ after 2020-03-19 11:49:00.148541377 -0300 @@ -6,6 +6,7 @@ [132] = "SCTP", [136] = "UDPLITE", [137] = "MPLS", + [143] = "ETHERNET", [17] = "UDP", [1] = "ICMP", [22] = "IDP", $ Addresses this tools/perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h' diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h Cc: David S. Miller <davem@davemloft.net> Cc: Paolo Lungaroni <paolo.lungaroni@cnit.it> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
Vijay Thakkar authored
This patch updates the PMCs for AMD Zen1 core based processors (Family 17h; Models 0 through 2F) to be in accordance with PMCs as documented in the latest versions of the AMD Processor Programming Reference [1], [2] and [3]. Note that some events, such as FPU pipe assignment are missing in [1], and therefore [3] is included for full coverage of events. PMCs added: fpu_pipe_assignment.dual{0|1|2|3} fpu_pipe_assignment.total{0|1|2|3} ls_mab_alloc.dc_prefetcher ls_mab_alloc.stores ls_mab_alloc.loads bp_dyn_ind_pred bp_de_redirect PMC removed: ex_ret_cond_misp Cumulative counts, fpu_pipe_assignment.total and fpu_pipe_assignment.dual, existed in v1, but did expose port-level counters. ex_ret_cond_misp has been removed as it has been removed from the latest versions of the PPR, and when tested, always seems to sample zero as tested on a Ryzen 3400G system. [1]: Processor Programming Reference (PPR) for AMD Family 17h Models 01h,08h, Revision B2 Processors, 54945 Rev 3.03 - Jun 14, 2019. [2]: Processor Programming Reference (PPR) for AMD Family 17h Model 18h, Revision B1 Processors, 55570-B1 Rev 3.14 - Sep 26, 2019. [3]: OSRR for AMD Family 17h processors, Models 00h-2Fh, 56255 Rev 3.03 - July, 2018 All of the PPRs can be found at: https://bugzilla.kernel.org/show_bug.cgi?id=206537Signed-off-by:Vijay Thakkar <vijaythakkar@me.com> Acked-by:
Kim Phillips <kim.phillips@amd.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jon Grimm <jon.grimm@amd.com> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: vijay thakkar <vijaythakkar@me.com> Link: http://lore.kernel.org/lkml/20200318190002.307290-4-vijaythakkar@me.comSigned-off-by:
-
Vijay Thakkar authored
This patch adds PMU events for AMD Zen2 core based processors, namely, Matisse (model 71h), Castle Peak (model 31h) and Rome (model 2xh), as documented in the AMD Processor Programming Reference for Matisse [1]. The model number regex has been set to detect all the models under family 17 that do not match those of Zen1, as the range is larger for zen2. Zen2 adds some additional counters that are not present in Zen1 and events for them have been added in this patch. Some counters have also been removed for Zen2 thatwere previously present in Zen1 and have been confirmed to always sample zero on zen2. These added/removed counters have been omitted for brevity but can be found here: https://gist.github.com/thakkarV/5b12ca5fd7488eb2c42e451e40bdd5f3 Note that PPR for Zen2 [1] does not include some counters that were documented in the PPR for Zen1 based processors [2]. After having tested these counters, some of them that still work for zen2 systems have been preserved in the events for zen2. The counters that are omitted in [1] but are still measurable and non-zero on zen2 (tested on a Ryzen 3900X system) are the following: PMC 0x000 fpu_pipe_assignment.{total|total0|total1|total2|total3} PMC 0x004 fp_num_mov_elim_scal_op.* PMC 0x046 ls_tablewalker.* PMC 0x062 l2_latency.l2_cycles_waiting_on_fills PMC 0x063 l2_wcb_req.* PMC 0x06D l2_fill_pending.l2_fill_busy PMC 0x080 ic_fw32 PMC 0x081 ic_fw32_miss PMC 0x086 bp_snp_re_sync PMC 0x087 ic_fetch_stall.* PMC 0x08C ic_cache_inval.* PMC 0x099 bp_tlb_rel PMC 0x0C7 ex_ret_brn_resync PMC 0x28A ic_oc_mode_switch.* L3PMC 0x001 l3_request_g1.* L3PMC 0x006 l3_comb_clstr_state.* [1]: Processor Programming Reference (PPR) for AMD Family 17h Model 71h, Revision B0 Processors, 56176 Rev 3.06 - Jul 17, 2019 [2]: Processor Programming Reference (PPR) for AMD Family 17h Models 01h,08h, Revision B2 Processors, 54945 Rev 3.03 - Jun 14, 2019 All of the PPRs can be found at: https://bugzilla.kernel.org/show_bug.cgi?id=206537 Here are the results of running "fpu_pipe_assignment.total" events on my Ryzen 3900X family 17h model 71h system: Before this patch: $> perf list *fpu_pipe_assignment* List of pre-defined events (to be used in -e): After: $> perf list *fpu_pipe_assignment* floating point: fpu_pipe_assignment.total [Total number of fp uOps] fpu_pipe_assignment.total0 [Total number uOps assigned to pipe 0] fpu_pipe_assignment.total1 [Total number uOps assigned to pipe 1] fpu_pipe_assignment.total2 [Total number uOps assigned to pipe 2] fpu_pipe_assignment.total3 [Total number uOps assigned to pipe 3] Metric Groups: $> perf stat -e fpu_pipe_assignment.total sleep 1 Performance counter stats for 'sleep 1': 25,883 fpu_pipe_assignment.total 1.004145868 seconds time elapsed 0.001805000 seconds user 0.000000000 seconds sys Usage tests while running Linpackin the background: $> perf stat -I1000 -e fpu_pipe_assignment.total 1.000266796 79,313,191,516 fpu_pipe_assignment.total 2.000809630 68,091,474,430 fpu_pipe_assignment.total 3.001028115 52,925,023,174 fpu_pipe_assignment.total $> perf record -e fpu_pipe_assignment.total,fpu_pipe_assignment.total0 -a sleep 1 [ perf record: Woken up 9 times to write data ] [ perf record: Captured and wrote 4.031 MB perf.data (64764 samples) ] $> perf report --stdio --no-header | head -30 98.33% xhpl xhpl [.] dgemm_kernel 0.28% xhpl xhpl [.] dtrsm_kernel_LT 0.10% xhpl [kernel.kallsyms] [k] entry_SYSCALL_64 0.08% xhpl xhpl [.] idamax_k 0.07% baloo_file_extr liblmdb.so [.] mdb_mid2l_insert 0.06% xhpl xhpl [.] dgemm_itcopy 0.06% xhpl xhpl [.] dgemm_oncopy 0.06% xhpl [kernel.kallsyms] [k] __schedule 0.06% xhpl [kernel.kallsyms] [k] syscall_trace_enter 0.06% xhpl [kernel.kallsyms] [k] native_sched_clock 0.06% xhpl [kernel.kallsyms] [k] pick_next_task_fair 0.05% xhpl xhpl [.] blas_thread_server.llvm.15009391670273914865 0.04% xhpl [kernel.kallsyms] [k] do_syscall_64 0.04% xhpl [kernel.kallsyms] [k] yield_task_fair 0.04% xhpl libpthread-2.31.so [.] __pthread_mutex_unlock_usercnt 0.03% xhpl [kernel.kallsyms] [k] cpuacct_charge 0.03% xhpl [kernel.kallsyms] [k] syscall_return_via_sysret 0.03% xhpl libc-2.31.so [.] __sched_yield 0.03% xhpl [kernel.kallsyms] [k] __calc_delta $> perf annotate --stdio2 dgemm_kernel | egrep '^ {0,2}[0-9]+' -B2 -A2 sub $0x60,%rsp mov %rbx,(%rsp) 0.00 mov %rbp,0x8(%rsp) mov %r12,0x10(%rsp) 0.00 mov %r13,0x18(%rsp) mov %r14,0x20(%rsp) mov %r15,0x28(%rsp) -- mov %rdi,%r13 mov %rsi,0x28(%rsp) 0.00 mov %rdx,%r12 vmovsd %xmm0,0x30(%rsp) shl $0x3,%r10 mov 0x28(%rsp),%rax 0.00 xor %rdx,%rdx mov $0x18,%rdi div %rdi -- nop a0: mov %r12,%rax 0.00 shl $0x3,%rax mov %r8,%rdi lea (%r8,%rax,8),%r15 -- mov %r12,%rax nop 0.00 c0: vmovups (%rdi),%ymm1 0.09 vmovups 0x20(%rdi),%ymm2 0.02 vmovups (%r15),%ymm3 0.10 vmovups %ymm1,(%rsi) 0.07 vmovups %ymm2,0x20(%rsi) 0.07 vmovups %ymm3,0x40(%rsi) 0.06 add $0x40,%rdi add $0x40,%r15 add $0x60,%rsi 0.00 dec %rax ↑ jne c0 mov %r9,%r15 -- nop 110: lea 0x80(%rsp),%rsi 0.01 add $0x60,%rsi 0.03 mov %r12,%rax 0.00 sar $0x3,%rax cmp $0x2,%rax ↓ jl d26 prefetcht0 0x200(%rdi) 0.01 vmovups -0x60(%rsi),%ymm1 0.02 prefetcht0 0xa0(%rsi) 0.00 vbroadcastsd -0x80(%rdi),%ymm0 0.00 prefetcht0 0xe0(%rsi) 0.03 vmovups -0x40(%rsi),%ymm2 0.00 prefetcht0 0x120(%rsi) vmovups -0x20(%rsi),%ymm3 vmulpd %ymm0,%ymm1,%ymm4 0.01 prefetcht0 0x160(%rsi) vmulpd %ymm0,%ymm2,%ymm8 0.01 vmulpd %ymm0,%ymm3,%ymm12 0.02 prefetcht0 0x1a0(%rsi) 0.01 vbroadcastsd -0x78(%rdi),%ymm0 vmulpd %ymm0,%ymm1,%ymm5 0.01 vmulpd %ymm0,%ymm2,%ymm9 vmulpd %ymm0,%ymm3,%ymm13 0.01 vbroadcastsd -0x70(%rdi),%ymm0 vmulpd %ymm0,%ymm1,%ymm6 0.00 vmulpd %ymm0,%ymm2,%ymm10 0.00 add $0x60,%rsi ... snip ... nop 65e0: vmovddup -0x60(%rsi),%xmm2 0.00 vmovups -0x80(%rdi),%xmm0 vmovups -0x70(%rdi),%xmm1 0.00 vmovddup -0x58(%rsi),%xmm3 vfmadd231pd %xmm0,%xmm2,%xmm4 0.00 vfmadd231pd %xmm1,%xmm2,%xmm5 0.00 vfmadd231pd %xmm0,%xmm3,%xmm6 0.00 vfmadd231pd %xmm1,%xmm3,%xmm7 0.00 add $0x10,%rsi add $0x20,%rdi 0.00 dec %rax ↑ jne 65e0 nop nop 6620: vmovddup 0x30(%rsp),%xmm0 0.00 vmulpd %xmm0,%xmm4,%xmm4 0.00 vmulpd %xmm0,%xmm5,%xmm5 vmulpd %xmm0,%xmm6,%xmm6 vmulpd %xmm0,%xmm7,%xmm7 vaddpd (%r15),%xmm4,%xmm4 vaddpd 0x10(%r15),%xmm5,%xmm5 0.00 vaddpd (%r15,%r10,1),%xmm6,%xmm6 0.00 vaddpd 0x10(%r15,%r10,1),%xmm7,%xmm7 0.00 vmovups %xmm4,(%r15) vmovups %xmm5,0x10(%r15) 0.00 vmovups %xmm6,(%r15,%r10,1) vmovups %xmm7,0x10(%r15,%r10,1) add $0x20,%r15 -- lea (%r8,%rax,8),%r8 69d8: mov 0x20(%rsp),%r14 0.00 test $0x1,%r14 ↓ je 6d84 mov %r9,%r15 -- vbroadcastsd -0x28(%rsi),%ymm3 vfmadd231pd (%rdi),%ymm0,%ymm4 0.00 vfmadd231pd 0x20(%rdi),%ymm1,%ymm5 vfmadd231pd 0x40(%rdi),%ymm2,%ymm6 vfmadd231pd 0x60(%rdi),%ymm3,%ymm7 -- vmulpd %ymm0,%ymm4,%ymm4 vaddpd (%r15),%ymm4,%ymm4 0.00 vmovups %ymm4,(%r15) add $0x20,%r15 dec %r11 -- mov %rbx,%rsp mov (%rsp),%rbx 0.01 mov 0x8(%rsp),%rbp mov 0x10(%rsp),%r12 mov 0x18(%rsp),%r13 Signed-off-by:
-
Vijay Thakkar authored
This patch changes the previous blanket detection of AMD Family 17h processors to be more specific to Zen1 core based products only by replacing model detection regex pattern [[:xdigit:]]+ with ([12][0-9A-F]|[0-9A-F]), restricting to models 0 though 2f only. This change is required to allow for the addition of separate PMU events for Zen2 core based models in the following patches as those belong to family 17h but have different PMCs. Current PMU events directory has also been renamed to "amdzen1" from "amdfam17h" to reflect this specificity. Note that although this change does not break PMU counters for existing zen1 based systems, it does disable the current set of counters for zen2 based systems. Counters for zen2 have been added in the following patches in this patchset. Signed-off-by:
-
Kajol Jain authored
perf metricgroup: Fix printing event names of metric group with multiple events incase of overlapping events Commit f01642e4 ("perf metricgroup: Support multiple events for metricgroup") introduced support for multiple events in a metric group. But with the current upstream, metric events names are not printed properly incase we try to run multiple metric groups with overlapping event. With current upstream version, incase of overlapping metric events issue is, we always start our comparision logic from start. So, the events which already matched with some metric group also take part in comparision logic. Because of that when we have overlapping events, we end up matching current metric group event with already matched one. For example, in skylake machine we have metric event CoreIPC and Instructions. Both of them need 'inst_retired.any' event value. As events in Instructions is subset of events in CoreIPC, they endup in pointing to same 'inst_retired.any' value. In skylake platform: command:# ./perf stat -M CoreIPC,Instructions -C 0 sleep 1 Performance counter stats for 'CPU(s) 0': 1,254,992,790 inst_retired.any # 1254992790.0 Instructions # 1.3 CoreIPC 977,172,805 cycles 1,254,992,756 inst_retired.any 1.000802596 seconds time elapsed command:# sudo ./perf stat -M UPI,IPC sleep 1 Performance counter stats for 'sleep 1': 948,650 uops_retired.retire_slots 866,182 inst_retired.any # 0.7 IPC 866,182 inst_retired.any 1,175,671 cpu_clk_unhalted.thread Patch fixes the issue by adding a new bool pointer 'evlist_used' to keep track of events which already matched with some group by setting it true. So, we skip all used events in list when we start comparision logic. Patch also make some changes in comparision logic, incase we get a match miss, we discard the whole match and start again with first event id in metric event. With this patch: In skylake platform: command:# ./perf stat -M CoreIPC,Instructions -C 0 sleep 1 Performance counter stats for 'CPU(s) 0': 3,348,415 inst_retired.any # 0.3 CoreIPC 11,779,026 cycles 3,348,381 inst_retired.any # 3348381.0 Instructions 1.001649056 seconds time elapsed command:# ./perf stat -M UPI,IPC sleep 1 Performance counter stats for 'sleep 1': 1,023,148 uops_retired.retire_slots # 1.1 UPI 924,976 inst_retired.any 924,976 inst_retired.any # 0.6 IPC 1,489,414 cpu_clk_unhalted.thread 1.003064672 seconds time elapsed Signed-off-by:
Kajol Jain <kjain@linux.ibm.com> Acked-by:
-
Jin Yao authored
There is a slight misalignment in -A -I output. For example: # perf stat -e cpu/event=cpu-cycles/ -a -A -I 1000 # time CPU counts unit events 1.000440863 CPU0 1,068,388 cpu/event=cpu-cycles/ 1.000440863 CPU1 875,954 cpu/event=cpu-cycles/ 1.000440863 CPU2 3,072,538 cpu/event=cpu-cycles/ 1.000440863 CPU3 4,026,870 cpu/event=cpu-cycles/ 1.000440863 CPU4 5,919,630 cpu/event=cpu-cycles/ 1.000440863 CPU5 2,714,260 cpu/event=cpu-cycles/ 1.000440863 CPU6 2,219,240 cpu/event=cpu-cycles/ 1.000440863 CPU7 1,299,232 cpu/event=cpu-cycles/ The value of counts is not aligned with the column "counts" and the event name is not aligned with the column "events". With this patch, the output is, # perf stat -e cpu/event=cpu-cycles/ -a -A -I 1000 # time CPU counts unit events 1.000423009 CPU0 997,421 cpu/event=cpu-cycles/ 1.000423009 CPU1 1,422,042 cpu/event=cpu-cycles/ 1.000423009 CPU2 484,651 cpu/event=cpu-cycles/ 1.000423009 CPU3 525,791 cpu/event=cpu-cycles/ 1.000423009 CPU4 1,370,100 cpu/event=cpu-cycles/ 1.000423009 CPU5 442,072 cpu/event=cpu-cycles/ 1.000423009 CPU6 205,643 cpu/event=cpu-cycles/ 1.000423009 CPU7 1,302,250 cpu/event=cpu-cycles/ Now output is aligned. Signed-off-by:Jin Yao <yao.jin@linux.intel.com> Acked-by:
-
Jin Yao authored
When performing "perf report --group", it shows the event group information together. In previous patch, we have supported a new option "--group-sort-idx" to sort the output by the event at the index n in event group. It would be nice if we can use a hotkey in browser to select a event to sort. For example, # perf report --group Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, ... Overhead Command Shared Object Symbol 92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1 3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515 1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7 1.56% 0.01% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494ce 1.56% 0.00% 0.00% 0.00% mgen [kernel.kallsyms] [k] task_tick_fair 0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single 0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle 0.00% 0.03% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] g_main_context_check 0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] apic_timer_interrupt 0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] check_preempt_curr When user press hotkey '3' (event index, starting from 0), it indicates to sort output by the forth event in group. Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, ... Overhead Command Shared Object Symbol 92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1 0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle 3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515 0.00% 0.00% 0.00% 0.06% swapper [kernel.kallsyms] [k] hrtimer_start_range_ns 1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7 0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] update_curr 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] apic_timer_interrupt 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] native_apic_msr_eoi_write 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] __update_load_avg_se v6: --- Jiri provided a good improvement to eliminate unneeded refresh. This improvement is added to v6. v2: --- 1. Report warning at helpline when index is invalid. 2. Report warning at helpline when it's not group event. 3. Use "case '0' ... '9'" to refine the code 4. Split K_RELOAD implementation to another patch. Signed-off-by: -
Jin Yao authored
Sometimes we may need to reload the browser to update the output since some options are changed. This patch creates a new key K_RELOAD. Once the __cmd_report() returns K_RELOAD, it would repeat the whole process, such as, read samples from data file, sort the data and display in the browser. v5: --- 1. Fix the 'make NO_SLANG=1' error. Define K_RELOAD in util/hist.h. 2. Skip setup_sorting() in repeat path if last key is K_RELOAD. v4: --- Need to quit in perf_evsel_menu__run if key is K_RELOAD. Signed-off-by:
-
Jin Yao authored
When performing "perf report --group", it shows the event group information together. By default, the output is sorted by the first event in group. It would be nice for user to select any event for sorting. This patch introduces a new option "--group-sort-idx" to sort the output by the event at the index n in event group. For example, Before: # perf report --group --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, BR_MISP_RETIRED.ALL_BRANCHES:pp, cpu/event=0xc0,umask=1,cmask=1, # Event count (approx.): 6451235635 # # Overhead Command Shared Object Symbol # ................................ ......... ....................... ................................... # 92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1 3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515 1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7 1.56% 0.01% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494ce 1.56% 0.00% 0.00% 0.00% mgen [kernel.kallsyms] [k] task_tick_fair 0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single 0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle 0.00% 0.03% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] g_main_context_check 0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] apic_timer_interrupt ... After: # perf report --group --stdio --group-sort-idx 3 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, BR_MISP_RETIRED.ALL_BRANCHES:pp, cpu/event=0xc0,umask=1,cmask=1, # Event count (approx.): 6451235635 # # Overhead Command Shared Object Symbol # ................................ ......... ....................... ................................... # 92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1 0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle 3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515 0.00% 0.00% 0.00% 0.06% swapper [kernel.kallsyms] [k] hrtimer_start_range_ns 1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7 0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] update_curr 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] apic_timer_interrupt 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] native_apic_msr_eoi_write 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] __update_load_avg_se 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] scheduler_tick Now the output is sorted by the fourth event in group. v7: --- Rebase to latest perf/core, no other change. v4: --- 1. Update Documentation/perf-report.txt to mention '--group-sort-idx' support multiple groups with different amount of events and it should be used on grouped events. 2. Update __hpp__group_sort_idx(), just return when the idx is out of limit. 3. Return failure on symbol_conf.group_sort_idx && !session->evlist->nr_groups. So now we don't need to use together with --group. v3: --- Refine the code in __hpp__group_sort_idx(). Before: for (i = 1; i < nr_members; i++) { if (i == idx) { ret = field_cmp(fields_a[i], fields_b[i]); if (ret) goto out; } } After: if (idx >= 1 && idx < nr_members) { ret = field_cmp(fields_a[idx], fields_b[idx]); if (ret) goto out; } Signed-off-by: -
Jin Yao authored
In previous patch, we have supported the annotation functionality even without symbols. For this patch, it supports the hotkey 'a' on address in report view. Note that, for branch mode, we only support the annotation for "branch to" address. Signed-off-by:
-
Jin Yao authored
For perf report on stripped binaries it is currently impossible to do annotation. The annotation state is all tied to symbols, but there are either no symbols, or symbols are not covering all the code. We should support the annotation functionality even without symbols. This patch fakes a symbol and the symbol name is the string of address. After that, we just follow current annotation working flow. For example, 1. perf report Overhead Command Shared Object Symbol 20.67% div libc-2.27.so [.] __random_r 17.29% div libc-2.27.so [.] __random 10.59% div div [.] 0x0000000000000628 9.25% div div [.] 0x0000000000000612 6.11% div div [.] 0x0000000000000645 2. Select the line of "10.59% div div [.] 0x0000000000000628" and ENTER. Annotate 0x0000000000000628 Zoom into div thread Zoom into div DSO (use the 'k' hotkey to zoom directly into the kernel) Browse map details Run scripts for samples of symbol [0x0000000000000628] Run scripts for all samples Switch to another data file in PWD Exit 3. Select the "Annotate 0x0000000000000628" and ENTER. Percent│ │ │ │ Disassembly of section .text: │ │ 0000000000000628 <.text+0x68>: │ divsd %xmm4,%xmm0 │ divsd %xmm3,%xmm1 │ movsd (%rsp),%xmm2 │ addsd %xmm1,%xmm0 │ addsd %xmm2,%xmm0 │ movsd %xmm0,(%rsp) Now we can see the dump of object starting from 0x628. v5: --- Remove the hotkey 'a' implementation from this patch. It will be moved to a separate patch. v4: --- 1. Support the hotkey 'a'. When we press 'a' on address, now it supports the annotation. 2. Change the patch title from "Support interactive annotation of code without symbols" to "perf report: Support interactive annotation of code without symbols" v3: --- Keep just the ANNOTATION_DUMMY_LEN, and remove the opts->annotate_dummy_len since it's the "maybe in future we will provide" feature. v2: --- Fix a crash issue when annotating an address in "unknown" object. The steps to reproduce this issue: perf record -e cycles:u ls perf report 75.29% ls ld-2.27.so [.] do_lookup_x 23.64% ls ld-2.27.so [.] __GI___tunables_init 1.04% ls [unknown] [k] 0xffffffff85c01210 0.03% ls ld-2.27.so [.] _start When annotating 0xffffffff85c01210, the crash happens. v2 adds checking for ms->map in add_annotate_opt(). If the object is "unknown", ms->map is NULL. Committer notes: Renamed new_annotate_sym() to symbol__new_unresolved(). Use PRIx64 to fix this issue in some 32-bit arches: ui/browsers/hists.c: In function 'symbol__new_unresolved': ui/browsers/hists.c:2474:38: error: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Werror=format=] snprintf(name, sizeof(name), "%-#.*lx", BITS_PER_LONG / 4, addr); ~~~~~~^ ~~~~ %-#.*llx Signed-off-by:Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by:
-
- 23 Mar, 2020 3 commits
-
-
Jin Yao authored
For branch mode, if the symbol is not found, it prints the address. For example, 0x0000555eee0365a0 in below output. Overhead Command Source Shared Object Source Symbol Target Symbol 17.55% div libc-2.27.so [.] __random [.] __random 6.11% div div [.] 0x0000555eee0365a0 [.] rand 6.10% div libc-2.27.so [.] rand [.] 0x0000555eee036769 5.80% div libc-2.27.so [.] __random_r [.] __random 5.72% div libc-2.27.so [.] __random [.] __random_r 5.62% div libc-2.27.so [.] __random_r [.] __random_r 5.38% div libc-2.27.so [.] __random [.] rand 4.56% div libc-2.27.so [.] __random [.] __random 4.49% div div [.] 0x0000555eee036779 [.] 0x0000555eee0365ff 4.25% div div [.] 0x0000555eee0365fa [.] 0x0000555eee036760 But it's not very easy to understand what the instructions are in the binary. So this patch uses the al_addr instead. With this patch, the output is Overhead Command Source Shared Object Source Symbol Target Symbol 17.55% div libc-2.27.so [.] __random [.] __random 6.11% div div [.] 0x00000000000005a0 [.] rand 6.10% div libc-2.27.so [.] rand [.] 0x0000000000000769 5.80% div libc-2.27.so [.] __random_r [.] __random 5.72% div libc-2.27.so [.] __random [.] __random_r 5.62% div libc-2.27.so [.] __random_r [.] __random_r 5.38% div libc-2.27.so [.] __random [.] rand 4.56% div libc-2.27.so [.] __random [.] __random 4.49% div div [.] 0x0000000000000779 [.] 0x00000000000005ff 4.25% div div [.] 0x00000000000005fa [.] 0x0000000000000760 Now we can use objdump to dump the object starting from 0x5a0. For example, objdump -d --start-address 0x5a0 div 00000000000005a0 <rand@plt>: 5a0: ff 25 2a 0a 20 00 jmpq *0x200a2a(%rip) # 200fd0 <__cxa_finalize@plt+0x200a20> 5a6: 68 02 00 00 00 pushq $0x2 5ab: e9 c0 ff ff ff jmpq 570 <srand@plt-0x10> ... Committer testing: [root@seventh ~]# perf record -a -b sleep 1 [root@seventh ~]# perf report --header-only | grep cpudesc # cpudesc : Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz [root@seventh ~]# perf evlist -v cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: ANY [root@seventh ~]# Before: [root@seventh ~]# perf report --stdio --dso libsystemd-shared-241.so | head -20 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 2K of event 'cycles' # Event count (approx.): 2240 # # Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles # ........ ............... ........................ ...................... ...................... .................. # 0.13% systemd-journal libc-2.29.so [.] cfree@GLIBC_2.2.5 [.] _int_free 1 0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465c82 [.] 0x00007fe406465d80 1 0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465ded [.] 0x00007fe406465c30 1 0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465e4e [.] 0x00007fe406465de0 1 0.09% systemd-journal systemd-journald [.] free@plt [.] cfree@GLIBC_2.2.5 1 0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 18 0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 2 0.04% systemd libsystemd-shared-241.so [.] bus_resolve@plt [.] bus_resolve 204 0.04% systemd libsystemd-shared-241.so [.] getpid_cached@plt [.] getpid_cached 7 [root@seventh ~]# After: [root@seventh ~]# perf report --stdio --dso libsystemd-shared-241.so | head -20 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 2K of event 'cycles' # Event count (approx.): 2240 # # Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles # ........ ............... ........................ ...................... ...................... .................. # 0.13% systemd-journal libc-2.29.so [.] cfree@GLIBC_2.2.5 [.] _int_free 1 0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7c82 [.] 0x00000000000f7d80 1 0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7ded [.] 0x00000000000f7c30 1 0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7e4e [.] 0x00000000000f7de0 1 0.09% systemd-journal systemd-journald [.] free@plt [.] cfree@GLIBC_2.2.5 1 0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 18 0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 2 0.04% systemd libsystemd-shared-241.so [.] bus_resolve@plt [.] bus_resolve 204 0.04% systemd libsystemd-shared-241.so [.] getpid_cached@plt [.] getpid_cached 7 [root@seventh ~]# Lets use -v to get full paths and then try objdump on the unresolved address: [root@seventh ~]# perf report -v --stdio --dso libsystemd-shared-241.so |& grep libsystemd-shared-241.so | tail -1 0.04% systemd-journal /usr/lib/systemd/libsystemd-shared-241.so 0x80c1a B [.] 0x0000000000080c1a 0x80a95 B [.] 0x0000000000080a95 61 [root@seventh ~]# [root@seventh ~]# objdump -d --start-address 0x00000000000f7d80 /usr/lib/systemd/libsystemd-shared-241.so | head -20 /usr/lib/systemd/libsystemd-shared-241.so: file format elf64-x86-64 Disassembly of section .text: 00000000000f7d80 <proc_cmdline_parse_given@@SD_SHARED+0x330>: f7d80: 41 39 11 cmp %edx,(%r9) f7d83: 0f 84 ff fe ff ff je f7c88 <proc_cmdline_parse_given@@SD_SHARED+0x238> f7d89: 4c 8d 05 97 09 0c 00 lea 0xc0997(%rip),%r8 # 1b8727 <utf8_skip_data@@SD_SHARED+0x3147> f7d90: b9 49 00 00 00 mov $0x49,%ecx f7d95: 48 8d 15 c9 f5 0b 00 lea 0xbf5c9(%rip),%rdx # 1b7365 <utf8_skip_data@@SD_SHARED+0x1d85> f7d9c: 31 ff xor %edi,%edi f7d9e: 48 8d 35 9b ff 0b 00 lea 0xbff9b(%rip),%rsi # 1b7d40 <utf8_skip_data@@SD_SHARED+0x2760> f7da5: e8 a6 d6 f4 ff callq 45450 <log_assert_failed_realm@plt> f7daa: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1) f7db0: 41 56 push %r14 f7db2: 41 55 push %r13 f7db4: 41 54 push %r12 f7db6: 55 push %rbp [root@seventh ~]# If we tried the the reported address before this patch: [root@seventh ~]# objdump -d --start-address 0x00007fe406465d80 /usr/lib/systemd/libsystemd-shared-241.so | head -20 /usr/lib/systemd/libsystemd-shared-241.so: file format elf64-x86-64 [root@seventh ~]# Signed-off-by: -
Leo Yan authored
After copying Arm64's perf archive with object files and perf.data file to x86 laptop, the x86's perf kernel symbol resolution fails. It outputs 'unknown' for all symbols parsing. This issue is root caused by the function elf__needs_adjust_symbols(), x86 perf tool uses one weak version, Arm64 (and powerpc) has rewritten their own version. elf__needs_adjust_symbols() decides if need to parse symbols with the relative offset address; but x86 building uses the weak function which misses to check for the elf type 'ET_DYN', so that it cannot parse symbols in Arm DSOs due to the wrong result from elf__needs_adjust_symbols(). The DSO parsing should not depend on any specific architecture perf building; e.g. x86 perf tool can parse Arm and Arm64 DSOs, vice versa. And confirmed by Naveen N. Rao that powerpc64 kernels are not being built as ET_DYN anymore and change to ET_EXEC. This patch removes the arch specific functions for Arm64 and powerpc and changes elf__needs_adjust_symbols() as a common function. In the common elf__needs_adjust_symbols(), it checks an extra condition 'ET_DYN' for elf header type. With this fixing, the Arm64 DSO can be parsed properly with x86's perf tool. Before: # perf script main 3258 1 branches: 0 [unknown] ([unknown]) => ffff800010c4665c [unknown] ([kernel.kallsyms]) main 3258 1 branches: ffff800010c46670 [unknown] ([kernel.kallsyms]) => ffff800010c4eaec [unknown] ([kernel.kallsyms]) main 3258 1 branches: ffff800010c4eaec [unknown] ([kernel.kallsyms]) => ffff800010c4eb00 [unknown] ([kernel.kallsyms]) main 3258 1 branches: ffff800010c4eb08 [unknown] ([kernel.kallsyms]) => ffff800010c4e780 [unknown] ([kernel.kallsyms]) main 3258 1 branches: ffff800010c4e7a0 [unknown] ([kernel.kallsyms]) => ffff800010c4eeac [unknown] ([kernel.kallsyms]) main 3258 1 branches: ffff800010c4eebc [unknown] ([kernel.kallsyms]) => ffff800010c4ed80 [unknown] ([kernel.kallsyms]) After: # perf script main 3258 1 branches: 0 [unknown] ([unknown]) => ffff800010c4665c coresight_timeout+0x54 ([kernel.kallsyms]) main 3258 1 branches: ffff800010c46670 coresight_timeout+0x68 ([kernel.kallsyms]) => ffff800010c4eaec etm4_enable_hw+0x3cc ([kernel.kallsyms]) main 3258 1 branches: ffff800010c4eaec etm4_enable_hw+0x3cc ([kernel.kallsyms]) => ffff800010c4eb00 etm4_enable_hw+0x3e0 ([kernel.kallsyms]) main 3258 1 branches: ffff800010c4eb08 etm4_enable_hw+0x3e8 ([kernel.kallsyms]) => ffff800010c4e780 etm4_enable_hw+0x60 ([kernel.kallsyms]) main 3258 1 branches: ffff800010c4e7a0 etm4_enable_hw+0x80 ([kernel.kallsyms]) => ffff800010c4eeac etm4_enable+0x2d4 ([kernel.kallsyms]) main 3258 1 branches: ffff800010c4eebc etm4_enable+0x2e4 ([kernel.kallsyms]) => ffff800010c4ed80 etm4_enable+0x1a8 ([kernel.kallsyms]) v3: Changed to check for ET_DYN across all architectures. v2: Fixed Arm64 and powerpc native building. Reported-by:
Mike Leach <mike.leach@linaro.org> Signed-off-by:
Leo Yan <leo.yan@linaro.org> Reviewed-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
-
Ian Rogers authored
Reproducible with a clang asan build and then running perf test in particular 'Parse event definition strings'. Signed-off-by:
Ian Rogers <irogers@google.com> Acked-by:
-
- 20 Mar, 2020 5 commits
-
-
Kan Liang authored
The IMC uncore unit in Ice Lake server can only be accessed by MMIO, which is similar as Snow Ridge. Factor out __snr_uncore_mmio_init_box which can be shared with Ice Lake server in the following patch. No functional changes. Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1584470314-46657-2-git-send-email-kan.liang@linux.intel.com
-
Kan Liang authored
The offset between uncore boxes of free-running counters varies, e.g. IIO free-running counters on Ice Lake server. Add box_offsets, an array of offsets between adjacent uncore boxes. Signed-off-by:
-
Dan Carpenter authored
This NULL check is reversed so it leads to a Smatch warning and presumably a NULL dereference. kernel/events/core.c:1598 perf_event_groups_less() error: we previously assumed 'right->cgrp->css.cgroup' could be null (see line 1590) Fixes: 95ed6c70 ("perf/cgroup: Order events in RB tree by cgroup id") Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Peter Zijlstra authored
Kan and Andi reported that we fail to kill rotation when the flexible events go empty, but the context does not. XXX moar Fixes: fd7d5517 ("perf/cgroups: Don't rotate events for cgroups unnecessarily") Reported-by:
Andi Kleen <ak@linux.intel.com> Reported-by:
-
Peter Zijlstra authored
While looking at an objtool UACCESS warning, it suddenly occurred to me that it is entirely possible to have an OPTPROBE right in the middle of an UACCESS region. In this case we must of course clear FLAGS.AC while running the KPROBE. Luckily the trampoline already saves/restores [ER]FLAGS, so all we need to do is inject a CLAC. Unfortunately we cannot use ALTERNATIVE() in the trampoline text, so we have to frob that manually. Fixes: ca0bbc70f147 ("sched/x86_64: Don't save flags on context switch") Signed-off-by:Masami Hiramatsu <mhiramat@kernel.org> Link: https://lkml.kernel.org/r/20200305092130.GU2596@hirez.programming.kicks-ass.net
-
- 19 Mar, 2020 4 commits
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-5.7-20200317' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: perf record: Alexey Budankov: - Fix binding of AIO user space buffers to nodes maps: Dominik b. Czarnota: - Fix off by one in strncpy() size argument. Arnaldo Carvalho de Melo: - Use strstarts() to look for Android libraries. Ian Rogers: - Give synthetic mmap events an inode generation. man pages: Ian Rogers: - Set man page date to last git commit. perf test: Ian Rogers: - Print if shell directory isn't present. perf report: Jin Yao: - Fix no branch type statistics report issue. perf expr: Jiri Olsa: - Fix copy/paste mistake vendor events: Kan Liang: - Support metric constraints. vendor events intel: Kan Liang: - Add NO_NMI_WATCHDOG metric constraint. vendor events s390: Thomas Richter: - Add new deflate counters for IBM z15. ARM cs-etm: Leo Yan: - Last branch improvements. intel-pt: Adrian Hunter: - Update intel-pt.txt file with new location of the documentation. - Add Intel PT man page references. - Rename intel-pt.txt and put it in man page format. perl scripting: Michael Petlan: - Add common_callchain to fix argument order. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Conflicts: tools/perf/util/map.c
-
Ingo Molnar authored
Signed-off-by: -
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-5.7-20200310' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: perf stat: Jin Yao: - Show percore counts in per CPU output. perf report: Jin Yao: - Allow selecting which block info columns to report and its order. - Support color ops to print block percents in color. - Fix wrong block address comparison in block_info__cmp(). perf annotate: Ravi Bangoria: - Get rid of annotation->nr_jumps, unused. expr: Jiri Olsa: - Move expr lexer to flex. llvm: Arnaldo Carvalho de Melo: - Add debug hint message about missing kernel-devel package. core: Kan Liang: - Initial patches to support the recently added PERF_SAMPLE_BRANCH_HW_INDEX kernel feature. - Add check for unexpected use of reserved membrs in event attr, so that in the future older perf tools will complain instead of silently try to process unknown features. libapi: Namhyung Kim: - Adopt cgroupsfs_find_mountpoint() from tools/perf/util/. libperf: Michael Petlan: - Add counting example. libtraceevent: Steven Rostedt (VMware): - Remove extra '\n' in print_event_time(). Signed-off-by:
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo-5.6-20200309' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: perf probe: Masami Hiramatsu: - Fix deletion of multiple probe events. - Fix userspace libraries handling by not depending on dwfl_module_addrsym(). Event parsing: Ian Rogers: - Fix reading of invalid memory in event parsing. python binding: Ilie Halip: - Fix clang detection when using CC=clang-version. build: Masami Hiramatsu: - Fix O= use with relative paths. Android: Dominik b. Czarnota: - Fix off by one in strncpy() size argument when handling Android libraries. Signed-off-by:
-
- 17 Mar, 2020 7 commits
-
-
Jiri Olsa authored
Copy/paste leftover from recent refactor. Fixes: 26226a97 ("perf expr: Move expr lexer to flex") Signed-off-by:
-
Jin Yao authored
Previously we could get the report of branch type statistics. For example: # perf record -j any,save_type ... # t perf report --stdio # # Branch Statistics: # COND_FWD: 40.6% COND_BWD: 4.1% CROSS_4K: 24.7% CROSS_2M: 12.3% COND: 44.7% UNCOND: 0.0% IND: 6.1% CALL: 24.5% RET: 24.7% But now for the recent perf, it can't report the branch type statistics. It's a regression issue caused by commit 40c39e30 ("perf report: Fix a no annotate browser displayed issue"), which only counts the branch type statistics for browser mode. This patch moves the branch_type_count() outside of ui__has_annotation() checking, then branch type statistics can work for stdio mode. Fixes: 40c39e30 ("perf report: Fix a no annotate browser displayed issue") Signed-off-by: -
Ian Rogers authored
When mmap2 events are synthesized the ino_generation field isn't being set leading to uninitialized memory being compared. Caught with clang's -fsanitize=memory: ==124733==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55a96a6a65cc in __dso_id__cmp tools/perf/util/dsos.c:23:6 #1 0x55a96a6a81d5 in dso_id__cmp tools/perf/util/dsos.c:38:9 #2 0x55a96a6a717f in __dso__cmp_long_name tools/perf/util/dsos.c:74:15 #3 0x55a96a6a6c4c in __dsos__findnew_link_by_longname_id tools/perf/util/dsos.c:106:12 #4 0x55a96a6a851e in __dsos__findnew_by_longname_id tools/perf/util/dsos.c:178:9 #5 0x55a96a6a7798 in __dsos__find_id tools/perf/util/dsos.c:191:9 #6 0x55a96a6a7b57 in __dsos__findnew_id tools/perf/util/dsos.c:251:20 #7 0x55a96a6a7a57 in dsos__findnew_id tools/perf/util/dsos.c:259:17 #8 0x55a96a7776ae in machine__findnew_dso_id tools/perf/util/machine.c:2709:9 #9 0x55a96a77dfcf in map__new tools/perf/util/map.c:193:10 #10 0x55a96a77240a in machine__process_mmap2_event tools/perf/util/machine.c:1670:8 #11 0x55a96a7741a3 in machine__process_event tools/perf/util/machine.c:1882:9 #12 0x55a96a6aee39 in perf_event__process tools/perf/util/event.c:454:9 #13 0x55a96a87d633 in perf_tool__process_synth_event tools/perf/util/synthetic-events.c:63:9 #14 0x55a96a87f131 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:403:7 #15 0x55a96a8815d6 in __event__synthesize_thread tools/perf/util/synthetic-events.c:548:9 #16 0x55a96a882bff in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:681:3 #17 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9 #18 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9 #19 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8 #20 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2 #21 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9 #22 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9 #23 0x55a96a52966e in __cmd_test tools/perf/tests/builtin-test.c:603:4 #24 0x55a96a52855d in cmd_test tools/perf/tests/builtin-test.c:747:9 #25 0x55a96a2844d4 in run_builtin tools/perf/perf.c:312:11 #26 0x55a96a282bd0 in handle_internal_command tools/perf/perf.c:364:8 #27 0x55a96a284097 in run_argv tools/perf/perf.c:408:2 #28 0x55a96a282223 in main tools/perf/perf.c:538:3 Uninitialized value was stored to memory at #1 0x55a96a6a18f7 in dso__new_id tools/perf/util/dso.c:1230:14 #2 0x55a96a6a78ee in __dsos__addnew_id tools/perf/util/dsos.c:233:20 #3 0x55a96a6a7bcc in __dsos__findnew_id tools/perf/util/dsos.c:252:21 #4 0x55a96a6a7a57 in dsos__findnew_id tools/perf/util/dsos.c:259:17 #5 0x55a96a7776ae in machine__findnew_dso_id tools/perf/util/machine.c:2709:9 #6 0x55a96a77dfcf in map__new tools/perf/util/map.c:193:10 #7 0x55a96a77240a in machine__process_mmap2_event tools/perf/util/machine.c:1670:8 #8 0x55a96a7741a3 in machine__process_event tools/perf/util/machine.c:1882:9 #9 0x55a96a6aee39 in perf_event__process tools/perf/util/event.c:454:9 #10 0x55a96a87d633 in perf_tool__process_synth_event tools/perf/util/synthetic-events.c:63:9 #11 0x55a96a87f131 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:403:7 #12 0x55a96a8815d6 in __event__synthesize_thread tools/perf/util/synthetic-events.c:548:9 #13 0x55a96a882bff in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:681:3 #14 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9 #15 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9 #16 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8 #17 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2 #18 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9 #19 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9 Uninitialized value was stored to memory at #0 0x55a96a7725af in machine__process_mmap2_event tools/perf/util/machine.c:1646:25 #1 0x55a96a7741a3 in machine__process_event tools/perf/util/machine.c:1882:9 #2 0x55a96a6aee39 in perf_event__process tools/perf/util/event.c:454:9 #3 0x55a96a87d633 in perf_tool__process_synth_event tools/perf/util/synthetic-events.c:63:9 #4 0x55a96a87f131 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:403:7 #5 0x55a96a8815d6 in __event__synthesize_thread tools/perf/util/synthetic-events.c:548:9 #6 0x55a96a882bff in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:681:3 #7 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9 #8 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9 #9 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8 #10 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2 #11 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9 #12 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9 #13 0x55a96a52966e in __cmd_test tools/perf/tests/builtin-test.c:603:4 #14 0x55a96a52855d in cmd_test tools/perf/tests/builtin-test.c:747:9 #15 0x55a96a2844d4 in run_builtin tools/perf/perf.c:312:11 #16 0x55a96a282bd0 in handle_internal_command tools/perf/perf.c:364:8 #17 0x55a96a284097 in run_argv tools/perf/perf.c:408:2 #18 0x55a96a282223 in main tools/perf/perf.c:538:3 Uninitialized value was created by a heap allocation #0 0x55a96a22f60d in malloc llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:925:3 #1 0x55a96a882948 in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:655:15 #2 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9 #3 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9 #4 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8 #5 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2 #6 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9 #7 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9 #8 0x55a96a52966e in __cmd_test tools/perf/tests/builtin-test.c:603:4 #9 0x55a96a52855d in cmd_test tools/perf/tests/builtin-test.c:747:9 #10 0x55a96a2844d4 in run_builtin tools/perf/perf.c:312:11 #11 0x55a96a282bd0 in handle_internal_command tools/perf/perf.c:364:8 #12 0x55a96a284097 in run_argv tools/perf/perf.c:408:2 #13 0x55a96a282223 in main tools/perf/perf.c:538:3 SUMMARY: MemorySanitizer: use-of-uninitialized-value tools/perf/util/dsos.c:23:6 in __dso_id__cmp Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - string buffer formatting fixes in picolcd and sensor drivers, from Takashi Iwai - two new device IDs from Chen-Tsung Hsieh and Tony Fischetti * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: add ALWAYS_POLL quirk to lenovo pixart mouse HID: google: add moonball USB id HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflow HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflow
-
Kim Phillips authored
Family 19h introduces change in slice, core and thread specification in its L3 Performance Event Select (ChL3PmcCfg) h/w register. The change is incompatible with Family 17h's version of the register. Introduce a new path in l3_thread_slice_mask() to do things differently for Family 19h vs. Family 17h, otherwise the new hardware doesn't get programmed correctly. Instead of a linear core--thread bitmask, Family 19h takes an encoded core number, and a separate thread mask. There are new bits that are set for all cores and all slices, of which only the latter is used, since the driver counts events for all slices on behalf of the specified CPU. Also update amd_uncore_init() to base its L2/NB vs. L3/Data Fabric mode decision based on Family 17h or above, not just 17h and 18h: the Family 19h Data Fabric PMC is compatible with the Family 17h DF PMC. [ bp: Touchups. ] Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
-
Kim Phillips authored
Convert the l3_thread_slice_mask() function to use the more readable topology_* helper functions, more intuitive variable names like shift and thread_mask, and BIT_ULL(). No functional changes. Signed-off-by:
-
Kim Phillips authored
In order to better accommodate the upcoming Family 19h, given the 80-char line limit, move the existing code into a new l3_thread_slice_mask() function. No functional changes. [ bp: Touchups. ] Signed-off-by:
-
- 16 Mar, 2020 3 commits
-
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - allow use of ARMv8 arch timer in 32-bit VDSO - rename missed .fixup section - fix kbuild issue with stack protector GCC plugin * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8961/2: Fix Kbuild issue caused by per-task stack protector GCC plugin ARM: 8958/1: rename missed uaccess .fixup section ARM: 8957/1: VDSO: Match ARMv8 timer in cntvct_functional()
-
Tony Fischetti authored
A lenovo pixart mouse (17ef:608d) is afflicted common the the malfunction where it disconnects and reconnects every minute--each time incrementing the device number. This patch adds the device id of the device and specifies that it needs the HID_QUIRK_ALWAYS_POLL quirk in order to work properly. Signed-off-by:
Tony Fischetti <tony.fischetti@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Chen-Tsung Hsieh authored
Add 1 additional hammer-like device. Signed-off-by:
Chen-Tsung Hsieh <chentsung@chromium.org> Reviewed-by:
Nicolas Boichat <drinkcat@chromium.org> Signed-off-by:
-
- 15 Mar, 2020 1 commit
-
-
Linus Torvalds authored
-
