- 05 Mar, 2012 1 commit
-
-
Rob Herring authored
-
- 29 Feb, 2012 3 commits
-
-
Arnd Bergmann authored
Merge branch 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into omap/cleanup * 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix L4_EMU_34XX_BASE error after iomap changes ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h ARM: OMAP2+: Move most of plat/io.h into local iomap.h ARM: OMAP1: Move most of plat/io.h into local iomap.h ARM: OMAP1: Move 16xx GPIO system clock to platform init code ARM: OMAP: Move omap_init_consistent_dma_size() to local common.h ARM: OMAP2+: Move SDRC related functions from io.h into local common.h ARM: OMAP2+: Drop DISPC L3 firewall code ARM: OMAP2xxx: PM: remove obsolete timer disable code in the suspend path ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_config
-
git://github.com/at91linux/linux-at91Arnd Bergmann authored
Merge branch 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91 into at91/staging/base2+cleanup * 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91: (20 commits) ARM: at91: properly sort dtb files in Makefile.boot ARM: at91: add at91sam9g25ek.dts in Makefile.boot ARM: at91/board-dt: drop default console Atmel: move console default platform_device to serial driver ARM: at91: merge SRAM Memory banks thanks to mirroring ARM: at91: finally drop at91_sys_read/write ARM: at91/rtc-at91sam9: pass the GPBR to use via resources ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use ARM: at91/PMC: make register base soc independent ARM: at91/PMC: move assignment out of printf ARM: at91/pm_slowclock: add runtime detection of memory contoller ARM: at91: make sdram/ddr register base soc independent ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h ARM: at91/pm_slowclock: function slow_clock() accepts parameters ARM: at91/pm_slowclock: rename register to named define ARM: at91/ST: remove not needed casts ARM: at91: make ST (System Timer) soc independent ARM: at91: make matrix register base soc independent ARM: at91/at91x40: remove use of at91_sys_read/write Based on top of the at91/9x5, rmk/for-armsoc, at91/device-board, at91/pm_cleanup and at91/base. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Tony Lindgren authored
With the introduction of iomap changes platform init code fails for emu.c if CONFIG_OMAP3_EMU is selected: arch/arm/mach-omap2/emu.c:35:8: error: 'L4_EMU_34XX_BASE' undeclared here (not in a function) Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 28 Feb, 2012 1 commit
-
-
Tony Lindgren authored
-
- 24 Feb, 2012 10 commits
-
-
Tony Lindgren authored
Drivers should no longer use omap_read/write functions but instead use ioremap + read/write functions. As some USB legacy code is still shared between omap1 and omap2420, let's limit the omap_read/write to plat/usb.h. Note that the long term fix is to update the drivers to use ioremap and read/write functions. That can now be done as a separate patch series that is limited to the USB drivers. Also make sure the legacy omap1-keypad.c driver builds if selected for 2420 based systems. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
This is needed to minimize io.h so the SoC specific io.h for ARMs can removed. Note that minimal driver changes for DSS and RNG are needed to include cpu.h for SoC detection macros. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
There's no need to have these defines in plat/io.h. Note that we now need to ifdef omap_read/write calls as they will be available for omap1 only. While at it, clean up the includes to group them like they typically are grouped. Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
There's no need to have these in plat/io.h. While at it, clean up the includes to group them like they typically are grouped. Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
This way we can remove omap_read/write call from the GPIO driver and remove include to linux/io.h. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
We don't want to keep it in io.h as we want to remove io.h for omap2+ for the common zImage support. Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
These should be local to omap2/3/4. Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
This is only needed when using SRAM for framebuffer, and the support for SRAM framebuffer is about to get removed. Otherwise we cannot move most of plat/io.h to be a local iomap.h for mach-omap2. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Paul Walmsley authored
Remove omap_{read,write}l() from the 24xx PM code. The clocksource code should now handle what this was supposed to do. Tested on N800 -- but it's hard to say whether this fixes anything. OMAP24xx static suspend path is currently broken, and this patch doesn't change that. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rob Herring <robherring2@gmail.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Jarkko Nikula authored
Flag single_channel in struct omap2_mcspi_device_config is not used by drivers/spi/spi-omap2-mcspi.c so we may remove it from include/plat/mcspi.h and affected board files. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 23 Feb, 2012 19 commits
-
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Nicolas Ferre authored
Reported-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
This default console mechanism is not used if the console is selected by command line (console= parameter). Dropping this will simplify the compilation of multiple SoC in the same kernel image. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
This variable spread on every SoC that is using the atmel_serial.c driver can be included directly into the latter. This will allow to compile multiple soc in the same kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: kernel@avr32linux.org
-
Jean-Christophe PLAGNIOL-VILLARD authored
On at91sam9260 and at91sam9g20 the SRAM banks are mirrored. We can merge them together to be able to have bigger and continuous internal RAM. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
Remove at91_sys_read/write() from io.h file. This function is not used anymore and was a stopper on the way to single zImage kernel for AT91. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
The GPBR registers are used for storing RTC values. The GPBR registers to use are now provided using standard resource entry. The array is filled in SoC specific code. rtc-at91sam9 RTT as RTC driver is modified to retrieve this information. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: rework resources assignment] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
Instead of computing virtual address with AT91_VA_BASE_SYS, use the appropriate ioremap() call on the driver "memory" resource. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
For the RTT as RTC driver rtc-at91sam9, the platform_device structure is filled during SoC initialization. This will allow to convert this RTC driver as a standard platform driver. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
-
Nicolas Ferre authored
We move the assignment of values of register out of the seq_printf() calls: It is obviously more readable. Reported-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
This will allow to have all SoC in one kernel image. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
This cleanup is done to allow to have multiple SoC in the same image. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
Change slow_clock()/at91_slow_clock() prototype to accept the PMC base address and one or two RAM controller addresses by parameters. The r0, r1 and r2 registers are used differently and preserved during function call. Those values are defined in pm.c and slow_clock() function is called from there with its new parameters. This will allow to have a soc independent pm_slowclock. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Ached-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
This patch will give a name to ARM registers in the assembly source code. It is done to simplify the code reading and the passing of parameters to functions. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Nicolas Ferre authored
Remove the unnecessary (void) cast on at91_st_read() return value. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Ryan Mallon <rmallon@gmail.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com> Cc: linux-usb@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 Feb, 2012 1 commit
-
-
- 21 Feb, 2012 4 commits
-
-
Rob Herring authored
Now that most platforms don't need disable_fiq and arch_ret_to_user macros, we can remove the empty macros or empty entry-macro.S files. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawn.guo@linaro.org>
-
Rob Herring authored
With the removal of disable_fiq on rpc and addition MULTI_IRQ_HANDLER, entry-macro.S is no longer needed for platforms that select MULTI_IRQ_HANDLER and the include of it can be conditional. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
-
Rob Herring authored
Only rpc uses disable_fiq macro. Change it to a run-time installed default FIQ handler. The handler is installed before FIQ is enabled so the behavior should be unchanged. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Pitre <nico@linaro.org>
-
Rob Herring authored
Only 3 platforms need arch_ret_to_user macro, so add ARCH_HAS_RET_TO_USER kconfig option and make iop13xx, iop32x and iop33x select it. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Pitre <nico@linaro.org>
-
- 17 Feb, 2012 1 commit
-
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-