- 27 Jan, 2014 2 commits
-
-
Jeff Layton authored
There is a possible race in how the nfs_invalidate_mapping function is handled. Currently, we go and invalidate the pages in the file and then clear NFS_INO_INVALID_DATA. The problem is that it's possible for a stale page to creep into the mapping after the page was invalidated (i.e., via readahead). If another writer comes along and sets the flag after that happens but before invalidate_inode_pages2 returns then we could clear the flag without the cache having been properly invalidated. So, we must clear the flag first and then invalidate the pages. Doing this however, opens another race: It's possible to have two concurrent read() calls that end up in nfs_revalidate_mapping at the same time. The first one clears the NFS_INO_INVALID_DATA flag and then goes to call nfs_invalidate_mapping. Just before calling that though, the other task races in, checks the flag and finds it cleared. At that point, it trusts that the mapping is good and gets the lock on the page, allowing the read() to be satisfied from the cache even though the data is no longer valid. These effects are easily manifested by running diotest3 from the LTP test suite on NFS. That program does a series of DIO writes and buffered reads. The operations are serialized and page-aligned but the existing code fails the test since it occasionally allows a read to come out of the cache incorrectly. While mixing direct and buffered I/O isn't recommended, I believe it's possible to hit this in other ways that just use buffered I/O, though that situation is much harder to reproduce. The problem is that the checking/clearing of that flag and the invalidation of the mapping really need to be atomic. Fix this by serializing concurrent invalidations with a bitlock. At the same time, we also need to allow other places that check NFS_INO_INVALID_DATA to check whether we might be in the middle of invalidating the file, so fix up a couple of places that do that to look for the new NFS_INO_INVALIDATING flag. Doing this requires us to be careful not to set the bitlock unnecessarily, so this code only does that if it believes it will be doing an invalidation. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com>
-
Malahal Naineni authored
Currently we support ACLs if the NFS server file system supports both ALLOW and DENY ACE types. This patch makes the Linux client work with ACLs even if the server supports only 'ALLOW' ACE type. Signed-off-by:
Malahal Naineni <malahal@us.ibm.com> Signed-off-by:
-
- 23 Jan, 2014 1 commit
-
-
Boaz Harrosh authored
An NFS4ERR_RECALLCONFLICT is returned by server from a GET_LAYOUT only when a Server Sent a RECALL do to that GET_LAYOUT, or the RECALL and GET_LAYOUT crossed on the wire. In any way this means we want to wait at most until in-flight IO is finished and the RECALL can be satisfied. So a proper wait here is more like 1/10 of a second, not 15 seconds like we have now. In case of a server bug we delay exponentially longer on each retry. Current code totally craps out performance of very large files on most pnfs-objects layouts, because of how the map changes when the file has grown into the next raid group. [Stable: This will patch back to 3.9. If there are earlier still maintained trees, please tell me I'll send a patch] CC: Stable Tree <stable@vger.kernel.org> Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
-
- 21 Jan, 2014 1 commit
-
-
Weston Andros Adamson authored
cond_resched_lock(cinfo->lock) is called everywhere else while holding the cinfo->lock spinlock. Not holding this lock while calling transfer_commit_list in filelayout_recover_commit_reqs causes the BUG below. It's true that we can't hold this lock while calling pnfs_put_lseg, because that might try to lock the inode lock - which might be the same lock as cinfo->lock. To reproduce, mount a 2 DS pynfs server and run an O_DIRECT command that crosses a stripe boundary and is not page aligned, such as: dd if=/dev/zero of=/mnt/f bs=17000 count=1 oflag=direct BUG: sleeping function called from invalid context at linux/fs/nfs/nfs4filelayout.c:1161 in_atomic(): 0, irqs_disabled(): 0, pid: 27, name: kworker/0:1 2 locks held by kworker/0:1/27: #0: (events){.+.+.+}, at: [<ffffffff810501d7>] process_one_work+0x175/0x3a5 #1: ((&dreq->work)){+.+...}, at: [<ffffffff810501d7>] process_one_work+0x175/0x3a5 CPU: 0 PID: 27 Comm: kworker/0:1 Not tainted 3.13.0-rc3-branch-dros_testing+ #21 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 Workqueue: events nfs_direct_write_schedule_work [nfs] 0000000000000000 ffff88007a39bbb8 ffffffff81491256 ffff88007b87a130 ffff88007a39bbd8 ffffffff8105f103 ffff880079614000 ffff880079617d40 ffff88007a39bc20 ffffffffa011603e ffff880078988b98 0000000000000000 Call Trace: [<ffffffff81491256>] dump_stack+0x4d/0x66 [<ffffffff8105f103>] __might_sleep+0x100/0x105 [<ffffffffa011603e>] transfer_commit_list+0x94/0xf1 [nfs_layout_nfsv41_files] [<ffffffffa01160d6>] filelayout_recover_commit_reqs+0x3b/0x68 [nfs_layout_nfsv41_files] [<ffffffffa00ba53a>] nfs_direct_write_reschedule+0x9f/0x1d6 [nfs] [<ffffffff810705df>] ? mark_lock+0x1df/0x224 [<ffffffff8106e617>] ? trace_hardirqs_off_caller+0x37/0xa4 [<ffffffff8106e691>] ? trace_hardirqs_off+0xd/0xf [<ffffffffa00ba8f8>] nfs_direct_write_schedule_work+0x9d/0xb7 [nfs] [<ffffffff810501d7>] ? process_one_work+0x175/0x3a5 [<ffffffff81050258>] process_one_work+0x1f6/0x3a5 [<ffffffff810501d7>] ? process_one_work+0x175/0x3a5 [<ffffffff8105187e>] worker_thread+0x149/0x1f5 [<ffffffff81051735>] ? rescuer_thread+0x28d/0x28d [<ffffffff81056d74>] kthread+0xd2/0xda [<ffffffff81056ca2>] ? __kthread_parkme+0x61/0x61 [<ffffffff8149e66c>] ret_from_fork+0x7c/0xb0 [<ffffffff81056ca2>] ? __kthread_parkme+0x61/0x61 Signed-off-by:Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
-
- 20 Jan, 2014 1 commit
-
-
Weston Andros Adamson authored
If clp is new (cl_count = 1) and it matches another client in nfs4_discover_server_trunking, the nfs_put_client will free clp before ->cl_preserve_clid is set. Cc: stable@vger.kernel.org # 3.7+ Signed-off-by:
-
- 19 Jan, 2014 1 commit
-
-
Trond Myklebust authored
Both nfs41_walk_client_list and nfs40_walk_client_list expect the 'status' variable to be set to the value -NFS4ERR_STALE_CLIENTID if the loop fails to find a match. The problem is that the 'pos->cl_cons_state > NFS_CS_READY' changes the value of 'status', and sets it either to the value '0' (which indicates success), or to the value EINTR. Cc: stable@vger.kernel.org # 3.7.x: 7b1f1fd1: NFSv4/4.1: Fix bugs in Signed-off-by:
-
- 17 Jan, 2014 1 commit
-
-
Scott Mayhew authored
We should always make sure the cached page is up-to-date when we're determining whether we can extend a write to cover the full page -- even if we've received a write delegation from the server. Commit c7559663 added logic to skip this check if we have a write delegation, which can lead to data corruption such as the following scenario if client B receives a write delegation from the NFS server: Client A: # echo 123456789 > /mnt/file Client B: # echo abcdefghi >> /mnt/file # cat /mnt/file 0�D0�abcdefghi Just because we hold a write delegation doesn't mean that we've read in the entire page contents. Cc: <stable@vger.kernel.org> # v3.11+ Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Signed-off-by:
-
- 13 Jan, 2014 10 commits
-
-
Christoph Hellwig authored
Make sure to properly invalidate the pagecache before performing direct I/O, so that no stale pages are left around. This matches what the generic direct I/O code does. Also take the i_mutex over the direct write submission to avoid the lifelock vs truncate waiting for i_dio_count to decrease, and to avoid having the pagecache easily repopulated while direct I/O is in progrss. Again matching the generic direct I/O code. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
We'll need the i_mutex to prevent i_dio_count from incrementing while truncate is waiting for it to reach zero, and protects against having the pagecache repopulated after we flushed it. Signed-off-by:
-
Christoph Hellwig authored
Simple code cleanup to prepare for later fixes. Signed-off-by:
-
Christoph Hellwig authored
Simple code cleanup to prepare for later fixes. Signed-off-by:
-
Christoph Hellwig authored
i_dio_count is used to protect dio access against truncate. We want to make sure there are no dio reads pending either when doing a truncate. I suspect on plain NFS things might work even without this, but once we use a pnfs layout driver that access backing devices directly things will go bad without the proper synchronization. Signed-off-by:
-
Christoph Hellwig authored
We need to have the I/O fully finished before telling the truncate code that we are done. Signed-off-by:
-
Christoph Hellwig authored
nfs_file_direct_write only updates the inode size if it succeeded and returned the number of bytes written. But in the AIO case nfs_direct_wait turns the return value into -EIOCBQUEUED and we skip the size update. Instead the aio completion path should updated it, which this patch does. The implementation is a little hacky because there is no obvious way to find out we are called for a write in nfs_direct_complete. Signed-off-by:
-
Weston Andros Adamson authored
Don't check for -NFS4ERR_NOTSUPP, it's already been mapped to -ENOTSUPP by nfs4_stat_to_errno. This allows the client to mount v4.1 servers that don't support SECINFO_NO_NAME by falling back to the "guess and check" method of nfs4_find_root_sec. Signed-off-by:
-
Trond Myklebust authored
nfs4_write_inode() must not be allowed to exit until the layoutcommit is done. That means that both NFS_INO_LAYOUTCOMMIT and NFS_INO_LAYOUTCOMMITTING have to be cleared. Signed-off-by: -
Trond Myklebust authored
If a LAYOUTCOMMIT is outstanding, then chances are that the metadata server may still be returning incorrect values for the change attribute, ctime, mtime and/or size. Just ignore those attributes for now, and wait for the LAYOUTCOMMIT rpc call to finish. Reported-by:
shaobingqing <shaobingqing@bwstor.com.cn> Signed-off-by:
-
- 05 Jan, 2014 4 commits
-
-
Toralf Förster authored
Signed-off-by:
Toralf Förster <toralf.foerster@gmx.de> Signed-off-by:
-
Niels de Vos authored
A fileid in NFS is a uint64. There are some occurrences where dprintk() outputs a signed fileid. This leads to confusion and more difficult to read debugging (negative fileids matching positive inode numbers). Signed-off-by:
Niels de Vos <ndevos@redhat.com> CC: Santosh Pradhan <spradhan@redhat.com> Signed-off-by:
-
Alexander Aring authored
The correct way to check on IPV6_ADDR_SCOPE_LINKLOCAL is to check with the ipv6_addr_src_scope function. Currently this can't be work, because ipv6_addr_scope returns a int with a mask of IPV6_ADDR_SCOPE_MASK (0x00f0U) and IPV6_ADDR_SCOPE_LINKLOCAL is 0x02. So the condition is always false. Signed-off-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
-
Weston Andros Adamson authored
When a task enters call_refreshresult with status 0 from call_refresh and !rpcauth_uptodatecred(task) it enters call_refresh again with no rate-limiting or max number of retries. Instead of trying forever, make use of the retry path that other errors use. This only seems to be possible when the crrefresh callback is gss_refresh_null, which only happens when destroying the context. To reproduce: 1) mount with sec=krb5 (or sec=sys with krb5 negotiated for non FSID specific operations). 2) reboot - the client will be stuck and will need to be hard rebooted BUG: soft lockup - CPU#0 stuck for 22s! [kworker/0:2:46] Modules linked in: rpcsec_gss_krb5 nfsv4 nfs fscache ppdev crc32c_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd serio_raw i2c_piix4 i2c_core e1000 parport_pc parport shpchp nfsd auth_rpcgss oid_registry exportfs nfs_acl lockd sunrpc autofs4 mptspi scsi_transport_spi mptscsih mptbase ata_generic floppy irq event stamp: 195724 hardirqs last enabled at (195723): [<ffffffff814a925c>] restore_args+0x0/0x30 hardirqs last disabled at (195724): [<ffffffff814b0a6a>] apic_timer_interrupt+0x6a/0x80 softirqs last enabled at (195722): [<ffffffff8103f583>] __do_softirq+0x1df/0x276 softirqs last disabled at (195717): [<ffffffff8103f852>] irq_exit+0x53/0x9a CPU: 0 PID: 46 Comm: kworker/0:2 Not tainted 3.13.0-rc3-branch-dros_testing+ #4 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 Workqueue: rpciod rpc_async_schedule [sunrpc] task: ffff8800799c4260 ti: ffff880079002000 task.ti: ffff880079002000 RIP: 0010:[<ffffffffa0064fd4>] [<ffffffffa0064fd4>] __rpc_execute+0x8a/0x362 [sunrpc] RSP: 0018:ffff880079003d18 EFLAGS: 00000246 RAX: 0000000000000005 RBX: 0000000000000007 RCX: 0000000000000007 RDX: 0000000000000007 RSI: ffff88007aecbae8 RDI: ffff8800783d8900 RBP: ffff880079003d78 R08: ffff88006e30e9f8 R09: ffffffffa005a3d7 R10: ffff88006e30e7b0 R11: ffff8800783d8900 R12: ffffffffa006675e R13: ffff880079003ce8 R14: ffff88006e30e7b0 R15: ffff8800783d8900 FS: 0000000000000000(0000) GS:ffff88007f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3072333000 CR3: 0000000001a0b000 CR4: 00000000001407f0 Stack: ffff880079003d98 0000000000000246 0000000000000000 ffff88007a9a4830 ffff880000000000 ffffffff81073f47 ffff88007f212b00 ffff8800799c4260 ffff8800783d8988 ffff88007f212b00 ffffe8ffff604800 0000000000000000 Call Trace: [<ffffffff81073f47>] ? trace_hardirqs_on_caller+0x145/0x1a1 [<ffffffffa00652d3>] rpc_async_schedule+0x27/0x32 [sunrpc] [<ffffffff81052974>] process_one_work+0x211/0x3a5 [<ffffffff810528d5>] ? process_one_work+0x172/0x3a5 [<ffffffff81052eeb>] worker_thread+0x134/0x202 [<ffffffff81052db7>] ? rescuer_thread+0x280/0x280 [<ffffffff81052db7>] ? rescuer_thread+0x280/0x280 [<ffffffff810584a0>] kthread+0xc9/0xd1 [<ffffffff810583d7>] ? __kthread_parkme+0x61/0x61 [<ffffffff814afd6c>] ret_from_fork+0x7c/0xb0 [<ffffffff810583d7>] ? __kthread_parkme+0x61/0x61 Code: e8 87 63 fd e0 c6 05 10 dd 01 00 01 48 8b 43 70 4c 8d 6b 70 45 31 e4 a8 02 0f 85 d5 02 00 00 4c 8b 7b 48 48 c7 43 48 00 00 00 00 <4c> 8b 4b 50 4d 85 ff 75 0c 4d 85 c9 4d 89 cf 0f 84 32 01 00 00 And the output of "rpcdebug -m rpc -s all": RPC: 61 call_refresh (status 0) RPC: 61 call_refresh (status 0) RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0 RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0 RPC: 61 call_refreshresult (status 0) RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0 RPC: 61 call_refreshresult (status 0) RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0 RPC: 61 call_refresh (status 0) RPC: 61 call_refreshresult (status 0) RPC: 61 call_refresh (status 0) RPC: 61 call_refresh (status 0) RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0 RPC: 61 call_refreshresult (status 0) RPC: 61 call_refresh (status 0) RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0 RPC: 61 call_refresh (status 0) RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0 RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0 RPC: 61 call_refreshresult (status 0) RPC: 61 call_refresh (status 0) RPC: 61 call_refresh (status 0) RPC: 61 call_refresh (status 0) RPC: 61 call_refresh (status 0) RPC: 61 call_refreshresult (status 0) RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0 Signed-off-by:
Weston Andros Adamson <dros@netapp.com> Cc: stable@vger.kernel.org # 2.6.37+ Signed-off-by:
-
- 31 Dec, 2013 4 commits
-
-
Trond Myklebust authored
Signed-off-by: -
Trond Myklebust authored
Currently we only report EAGAIN, which is not descriptive enough for softconn tasks. Signed-off-by: -
Trond Myklebust authored
Ensure that call_bind_status, call_connect_status, call_transmit_status and call_status all are capable of handling ECONNABORTED and EHOSTUNREACH. Signed-off-by: -
Trond Myklebust authored
Currently, xprt_connect_status will convert connection error values such as ECONNREFUSED, ECONNRESET, ... into EIO, which means that they never get handled. Signed-off-by:
-
- 10 Dec, 2013 1 commit
-
-
Jeff Layton authored
Currently, it could leak dentry references in some cases. Make sure we clean up properly. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 06 Dec, 2013 14 commits
-
-
Jeff Layton authored
rpc.gssd expects to see an "info" file in each clntXX dir. Since adding the dummy gssd pipe, users that run rpc.gssd see a lot of these messages spamming the logs: rpc.gssd[508]: ERROR: can't open /var/lib/nfs/rpc_pipefs/gssd/clntXX/info: No such file or directory rpc.gssd[508]: ERROR: failed to read service info Add a dummy gssd/clntXX/info file to help silence these messages. Signed-off-by: -
Jeff Layton authored
In the event that we create the gssd/clntXX dir, but the pipe creation subsequently fails, then we should remove the clntXX dir before returning. Signed-off-by:
-
Jeff Layton authored
Currently, the client will attempt to use krb5i in the SETCLIENTID call even if rpc.gssd isn't running. When that fails, it'll then fall back to RPC_AUTH_UNIX. This introduced a delay when mounting if rpc.gssd isn't running, and causes warning messages to pop up in the ring buffer. Check to see if rpc.gssd is running before even attempting to use krb5i auth, and just silently skip trying to do so if it isn't. In the event that the admin is actually trying to mount with krb5*, it will still fail at a later stage of the mount attempt. Signed-off-by:
-
Jeff Layton authored
Now that we have a more reliable method to tell if gssd is running, we can replace the sn->gssd_running flag with a function that will query to see if it's up and running. There's also no need to attempt an upcall that we know will fail, so just return -EACCES if gssd isn't running. Finally, fix the warn_gss() message not to claim that that the upcall timed out since we don't necesarily perform one now when gssd isn't running, and remove the extraneous newline from the message. Signed-off-by:
-
Jeff Layton authored
rpc.gssd will naturally hold open any pipe named */clnt*/gssd that shows up under rpc_pipefs. That behavior gives us a reliable mechanism to tell whether it's actually running or not. Create a new toplevel "gssd" directory in rpc_pipefs when it's mounted. Under that directory create another directory called "clntXX", and then within that a pipe called "gssd". We'll never send an upcall along that pipe, and any downcall written to it will just return -EINVAL. Signed-off-by:
-
Trond Myklebust authored
decode_op_hdr() cannot distinguish between an XDR decoding error and the perfectly valid errorcode NFS4ERR_IO. This is normally not a problem, but for the particular case of OPEN, we need to be able to increment the NFSv4 open sequence id when the server returns a valid response. Reported-by:
J Bruce Fields <bfields@fieldses.org> Link: http://lkml.kernel.org/r/20131204210356.GA19452@fieldses.orgSigned-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "A regression showed up that there's a large delay when enabling all events. This was prevalent when FTRACE_SELFTEST was enabled which enables all events several times, and caused the system bootup to pause for over a minute. This was tracked down to an addition of a synchronize_sched() performed when system call tracepoints are unregistered. The synchronize_sched() is needed between the unregistering of the system call tracepoint and a deletion of a tracing instance buffer. But placing the synchronize_sched() in the unreg of *every* system call tracepoint is a bit overboard. A single synchronize_sched() before the deletion of the instance is sufficient" * tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Only run synchronize_sched() at instance deletion time
-
git://git.kvack.org/~bcrl/aio-nextLinus Torvalds authored
Pull aio fix from Benjamin LaHaise: "AIO fix from Gu Zheng that fixes a GPF that Dave Jones uncovered with trinity" * git://git.kvack.org/~bcrl/aio-next: aio: clean up aio ring in the fail path
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of nine fixes (and one author update). The libsas one should fix discovery in eSATA devices, the WRITE_SAME one is the largest, but it should fix a lot of problems we've been getting with the emulated RAID devices (they've been effectively lying about support and then firmware has been choking on the commands). The rest are various crash, hang or warn driver fixes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] bfa: Fix crash when symb name set for offline vport [SCSI] enclosure: fix WARN_ON in dual path device removing [SCSI] pm80xx: Tasklets synchronization fix. [SCSI] pm80xx: Resetting the phy state. [SCSI] pm80xx: Fix for direct attached device. [SCSI] pm80xx: Module author addition [SCSI] hpsa: return 0 from driver probe function on success, not 1 [SCSI] hpsa: do not discard scsi status on aborted commands [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers [SCSI] libsas: fix usage of ata_tf_to_fis
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull IMA fixes from James Morris: "Here are two more fixes for IMA" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: ima: properly free ima_template_entry structures ima: Do not free 'entry' before it is initialized
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Various DT binding documentation updates - Add Kumar Gala and remove Stephen Warren as DT binding maintainers * tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt: binding: reword PowerPC 8xxx GPIO documentation ARM: tegra: delete nvidia,tegra20-spi.txt binding hwmon: ntc_thermistor: Fix typo (pullup-uV -> pullup-uv) of: add vendor prefix for GMT clk: exynos: Fix typos in DT bindings documentation of: Add vendor prefix for LG Corporation Documentation: net: fsl-fec.txt: Add phy-supply entry ARM: dts: doc: Document missing binding for omap5-mpu dt-bindings: add ARMv8 PMU binding MAINTAINERS: remove swarren from DT bindings MAINTAINERS: Add Kumar to Device Tree Binding maintainers group
-
Gu Zheng authored
Clean up the aio ring file in the fail path of aio_setup_ring and ioctx_alloc. And maybe it can fix the GPF issue reported by Dave Jones: https://lkml.org/lkml/2013/11/25/898Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org>
-
James Morris authored
Merge branch 'free-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into for-linus
-
