- 30 Nov, 2009 1 commit
-
-
Kuninori Morimoto authored
Signed-off-by:
Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by:
Paul Mundt <lethal@linux-sh.org> Acked-by:
Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 27 Nov, 2009 4 commits
-
-
Mark Brown authored
-
Daniel Mack authored
Signed-off-by:
Daniel Mack <daniel@caiaq.de> Acked-by:
-
Anuj Aggarwal authored
This patch fixes two issues: a) Infinite loop in resume function b) Writes to non-existing registers in resume function Cc: stable@kernel.org Signed-off-by:
Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by:
-
Takashi Iwai authored
The commit fe3e78e0 ASoC: Factor out snd_soc_init_card() removed the error paths that are still valid for wm97* codecs, causing the compile errors like sound/soc/codecs/wm9705.c:399: error: label 'reset_err' used but not defined sound/soc/codecs/wm9712.c:687: error: label 'reset_err' used but not defined sound/soc/codecs/wm9713.c:1237: error: label 'reset_err' used but not defined Revert the removed error path codes. Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 26 Nov, 2009 1 commit
-
-
Peter Ujfalusi authored
RT workqueue is going away in the near future, replace it with singlethread wq for now, which is still supported. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by:
-
- 25 Nov, 2009 3 commits
-
-
Mark Brown authored
Acked-by:
-
Mark Brown authored
-
Daniel J Blueman authored
Since twl4030_probe is only called from functions in the init ELF section, annotate it so. Signed-off-by:
Daniel J Blueman <daniel.blueman@gmail.com> Acked-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
- 23 Nov, 2009 2 commits
-
-
Mark Brown authored
-
Mark Brown authored
When we get a stream suspend event force the power down since otherwise the stream would remain marked as active. In future we'll probably want to make this stream-specific and add an interface to make the power down of other widgets optional in order to support leaving bypass paths active while suspending the processor. Cc: stable@kernel.org Reported-by:
Joonyoung Shim <jy0922.shim@samsung.com> Tested-by:
-
- 20 Nov, 2009 1 commit
-
-
Mark Brown authored
Merge branch 'ads117x' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.33
-
- 19 Nov, 2009 5 commits
-
-
Enric Balletbò i Serra authored
Signed-off-by:
Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by:
-
Troy Kisky authored
Use edma_pause and edma_resume to make missing dma_events less likely. This may not be needed, but it looks better. Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> Acked-by:
-
Troy Kisky authored
Fix underruns by using dma to copy 1st to sram in a ping/pong buffer style and then copying from the sram to the ASP. This also has the advantage of tolerating very long interrupt latency on dma completion. Signed-off-by:
-
Troy Kisky authored
Rename variable master_lch to asp_channel Rename variable slave_lch to asp_link[0] Rename local variables: lch to link count to asp_count src to asp_src dst to asp_dst Signed-off-by:
-
Troy Kisky authored
Allow the left and right 16 bit samples to be shifted out as 1 32 bit sample. Signed-off-by:
-
- 18 Nov, 2009 12 commits
-
-
Mark Brown authored
-
Troy Kisky authored
Fix the ordering of sr_valid_mask array. The lower bit of the index represents USB not bosr. Reported-by:
-
Grazvydas Ignotas authored
A while ago TWL4030 had it's playback stream name changed, but pandora needs it for it's playback path. Update to correct stream name so that playback works again. Also mark VIBRA output as not connected. Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Acked-by:
-
Anuj Aggarwal authored
Correcting the license string from GPLv2 -> GPL v2. Found the problem while building OMAP3 ASoC driver as module. Signed-off-by:
-
Mark Brown authored
Merge branch 'topic/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.33
-
Troy Kisky authored
Remove requirement that dma_params is 1st in the structures davinci_audio_dev and davinci_mcbsp_dev. Signed-off-by:
-
Jassi Brar authored
Signed-off-by:
Jassi Brar <jassi.brar@samsung.com> Acked-by:
-
Jassi Brar authored
Signed-off-by:
-
Jassi Brar authored
Many SoCs have their I2S pins MUXed with other functions. So we need to pass a callback for driver to configure the pins appropriately. Hence, the need of platform data and this header. As and when needed new callbacks and structure pointers maybe added to this header. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Acked-by:
-
Jassi Brar authored
Signed-off-by:
-
Jassi Brar authored
Making room for namespace for the PCM Controller driver the platform driver(s3c24xx-pcm) has been renamed to SoC agnostic name 's3c-dma'. Signed-off-by:
-
Jassi Brar authored
The s3c24xx_pcm prefix for the soc_platform is inappropriate when some Samsung SoCs have PCM controllers which will eventually have drivers and hence namespace ambiguities. To resolve naming ambiguities in future the following have been renamed in order 1) s3c24xx_pcm_dma_params -> s3c_dma_params 2) s3c24xx_pcm_preallocate_dma_buffer -> s3c_preallocate_dma_buffer 3) s3c24xx_pcm_dmamask -> s3c_dma_mask 4) s3c24xx_pcm_XXX -> s3c_dma_XXX Signed-off-by:
-
- 17 Nov, 2009 1 commit
-
-
Marin Mitov authored
Signed-off-by:
Marin Mitov <mitov@issp.bas.bg> Signed-off-by:
-
- 16 Nov, 2009 1 commit
-
-
Mike Rapoport authored
Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Acked-by:
Steve Sakoman <steve@sakoman.com> Signed-off-by:
-
- 12 Nov, 2009 5 commits
-
-
Mark Brown authored
The DAPM widgets are now insntantiated by the core when creating the card so there is no need for the individual CODEC drivers to do so. Signed-off-by: -
Joonyoung Shim authored
The jack_status_check callback function is the interface to check the status of the jack. Some target provides the method to distinguish what is the jack inserted - headphone jack, microphone jack, tvout jack, etc, so we can implement it using the jack_status_check function. Signed-off-by:
-
Barry Song authored
While probing, AC97 codec drivers and soc-core generically execute the following sequence: snd_soc_new_ac97_codec -> snd_soc_new_pcms -> reset ac-link/read AC97 ID to detect ->... -> set platform_data to ac97 by soc-core commit 474828a4 adds platform_data to snd_ac97 instance. But ac97 platform data hasn't given to snd_ac97 before actual ac97 operations. Then while ac97_read access platform_data of snd_ac97 for detecting, NULL pointer oops will fire. That means old platform_data patch doesn't work in real-life cases. This patch moves the operation of setting ac97 platform_data earlier than ac97 reading/writing operations. Then it makes platform_data of AC97 become practically useful. Signed-off-by:
Barry Song <21cnbao@gmail.com> Acked-by:
-
Jassi Brar authored
Corrected the order of 'source' and 'pll_id' arguments. Signed-off-by:
-
Mark Brown authored
Many devices need to calculate the bit clock rate desired to work out the clock configuration required for the device. Provide utility functions to do this using both hw_params structures and raw numbers. Signed-off-by:
-
- 10 Nov, 2009 4 commits
-
-
Grant Likely authored
The TX and RX irq handlers are identical. Merge them Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Acked-by:
-
Peter Ujfalusi authored
APLL_CTL register is configured by the twl4030-codec MFD driver. Remove code, which makes changes in the APLL_CTL register, and replace those with checks against the configured audio_mclk configuration done in the MFD driver. Signed-off-by:
-
Mark Brown authored
-
Peter Ujfalusi authored
Configure the APLL_INFREQ field in the APLL_CTL register based on the platform data. Provide also a function for childs to query the audio_mclk frequency. Signed-off-by:
-
