- 28 May, 2019 11 commits
-
-
Alex Deucher authored
Not necessary on soc15 and breaks driver reload on server cards. Acked-by:
Amber Lin <Amber.Lin@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Chunming Zhou authored
Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Reviewed-by:
Flora Cui <Flora.Cui@amd.com> Signed-off-by:
-
Oak Zeng authored
Add a field in map_queues packet to indicate whether this is a gws control queue. Only one queue per process can be gws control queue. Change num_gws field in map_process packet to 7 bits Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Oak Zeng authored
Add a new kfd ioctl to allocate queue GWS. Queue GWS is released on queue destroy. Signed-off-by:
-
Oak Zeng authored
Add functions in process queue manager to set/unset queue gws. Also set process's number of gws used. Currently only one queue in process can use and use all gws. Signed-off-by:
-
Oak Zeng authored
GWS bo is shared between all kfd processes. Add function to add gws to kfd process's bo list so gws can be evicted from and restored for process. Signed-off-by:
-
Oak Zeng authored
On device initialization, KFD allocates all (64) gws which is shared by all KFD processes. Signed-off-by:
-
Oak Zeng authored
Add amdgpu_amdkfd interface to alloc and free gws from amdgpu Signed-off-by:
-
Oak Zeng authored
Add amdgpu_amdkfd interface to get num_gws and add num_gws to /sys/class/kfd/kfd/topology/nodes/x/properties. Only report num_gws if MEC FW support GWS barriers. Currently it is determined by a module parameter which will be replaced with MEC FW version check when firmware is ready. Signed-off-by:
-
Oak Zeng authored
TTM doesn't support CPU mapping of sg type bo (under which mmio bo is created). Switch mmaping of mmio page to kfd device file. Signed-off-by:
-
Emily Deng authored
dc_destroy should be called amdgpu_cgs_destroy_device, as it will use cgs context to read or write registers. Signed-off-by:
Emily Deng <Emily.Deng@amd.com> Acked-by:
-
- 24 May, 2019 29 commits
-
-
Tom St Denis authored
Acked-by:
Slava Abramov <slava.abramov@amd.com> Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Tom St Denis authored
Acked-by:
-
Yogesh Mohan Marimuthu authored
[Why] There are monitors which can have more than one preferred mode set. There are chances in these monitors that if common modes are added in function amdgpu_dm_connector_add_common_modes(), these common modes can be calculated with different preferred mode than the one used in function decide_crtc_timing_for_drm_display_mode(). The preferred mode can be different because after common modes are added, the mode list is sorted and this changes the order of preferred modes in the list. The first mode in the list with preferred flag set is selected as preferred mode. Due to this the preferred mode selected varies. If same preferred mode is not selected in common mode calculation and crtc timing, then during mode set instead of setting preferred timing, common mode timing will be applied which can cause "out of range" message in the monitor with monitor blanking out. [How] Sort the modes before adding common modes. The same sorting function is called during common mode addition and deciding crtc timing. Signed-off-by:
Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] The current state on the connector is queried when getting the max bpc rather than the new state. This means that a new max bpc value can only currently take effect on the commit *after* it changes. The new state should be passed in instead. [How] Pass down the dm_state as drm state to where we do color depth lookup. The passed in state can still be NULL when called from amdgpu_dm_connector_mode_valid, so make sure that we have reasonable defaults in place. That should probably be addressed at some point. This change now (correctly) causes a modeset to occur when changing the max bpc for a connector. v2: Drop extra TODO. Cc: Leo Li <sunpeng.li@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] The custom "max bpc" property was added to limit color depth while the DRM one was still being merged. It's been a few kernel versions since then and this TODO was still sticking around. [How] Attach the DRM max bpc property to the connector and drop all of our custom property management. Set the max bpc to 8 by default since DRM defaults to the max in the range which would be 16 in this case. No behavioral changes are intended with this patch, it should just be a refactor. v2: Don't force 8bpc when no state is given Cc: Leo Li <sunpeng.li@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Chengming Gui authored
Fix code error to support value < 0 or > 1. Signed-off-by:
Chengming Gui <Jack.Gui@amd.com> Reviewed-by:
Hawking Zhang <hawking.zhang@amd.com> Signed-off-by:
-
Kent Russell authored
Add a file that provides a Unique ID for the GPU. This will persist across machines and is guaranteed to be unique. This is only available for GFX9 and newer, so older ASICs will not have this file in the sysfs pool v2: Store it in adev for ASICs that don't have a hwmgr Reviewed-by:
Kent Russell <kent.russell@amd.com> Signed-off-by:
-
Amber Lin authored
A multi-socket server can have multiple PCIe segments so BFD is not enough to distingush each GPU. Also add domain number into account when generating gpu_id. Signed-off-by:
-
Kent Russell authored
Add the VegaM information to KFD Signed-off-by:
-
Felix Kuehling authored
Fix a circular lock dependency exposed under userptr memory pressure. The DQM lock is the only one taken inside the MMU notifier. We need to make sure that no reclaim is done under this lock, and that no other locks are taken under which reclaim is possible. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Signed-off-by:
-
Oak Zeng authored
Alloc format was never really supported by MEC FW. FW always does one per pipe allocation. Signed-off-by:
-
Oak Zeng authored
Expose available numbers of both SDMA queue types in the topology. Signed-off-by:
-
Oak Zeng authored
Existing QUEUE_TYPE_SDMA means PCIe optimized SDMA queues. Introduce a new QUEUE_TYPE_SDMA_XGMI, which is optimized for non-PCIe transfer such as XGMI. Signed-off-by:
-
Oak Zeng authored
Previous codes assumes there are two sdma engines. This is not true e.g., Raven only has 1 SDMA engine. Fix the issue by using sdma engine number info in device_info. Signed-off-by:
-
Yong Zhao authored
This avoids duplicated code. Signed-off-by:
Yong Zhao <Yong.Zhao@amd.com> Reviewed-by:
-
Oak Zeng authored
Instead of allocat hiq and sdma mqd from sub-allocator, allocate them from a mqd trunk pool. This is done for all asics Signed-off-by:
Oak Zeng <ozeng@amd.com> Reviewed-by:
-
Oak Zeng authored
This is preparation work to introduce more mqd allocation scheme Signed-off-by:
-
Oak Zeng authored
Free mqd_mem_obj it GTT buffer allocation for MQD+control stack fails. Signed-off-by:
-
Oak Zeng authored
MEC FW for some new asic requires all SDMA MQDs to be in a continuous trunk of memory right after HIQ MQD. Add a field in device queue manager to hold the HIQ/SDMA MQD memory object and allocate MQD trunk on device queue manager initialization. Signed-off-by:
-
Oak Zeng authored
Also initialize mqd size on mqd manager initialization Signed-off-by:
-
Oak Zeng authored
Previously mqd managers was initialized on demand. As there are only a few type of mqd managers, the on demand initialization doesn't save too much memory. Initialize them on device queue initialization instead and delete the get_mqd_manager interface. This makes codes more organized for future changes. Signed-off-by:
-
Oak Zeng authored
With introduction of new mqd allocation scheme for HIQ, DIQ and HIQ use different mqd allocation scheme, DIQ can't reuse HIQ mqd manager Signed-off-by:
-
Oak Zeng authored
Global function mqd_manager_init just calls asic-specific functions and it is not necessary. Delete it and introduce a mqd_manager_init interface in dqm for asic-specific mqd manager init. Call mqd_manager_init interface directly to initialize mqd manager Signed-off-by:
-
Felix Kuehling authored
Use unsigned long for number of pages. Check that pfns are valid after hmm_vma_fault. If they are not, return an error instead of continuing with invalid page pointers and PTEs. Signed-off-by:
-
Philip Yang authored
If using old kernel config file, CONFIG_ZONE_DEVICE is not selected, so CONFIG_HMM and CONFIG_HMM_MIRROR is not enabled, the current driver error message "Failed to register MMU notifier" is not clear. Inform user with more descriptive message on how to fix the missing kernel config option. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109808Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Philip Yang authored
userptr may cross two VMAs if the forked child process (not call exec after fork) malloc buffer, then free it, and then malloc larger size buf, kerenl will create new VMA adjacent to old VMA which was cloned from parent process, some pages of userptr are in the first VMA, the rest pages are in the second VMA. HMM expects range only have one VMA, loop over all VMAs in the address range, create multiple ranges to handle this case. See is_mergeable_anon_vma in mm/mmap.c for details. Signed-off-by:
-
Philip Yang authored
Userptr restore may have concurrent userptr invalidation after hmm_vma_fault adds the range to the hmm->ranges list, needs call hmm_vma_range_done to remove the range from hmm->ranges list first, then reschedule the restore worker. Otherwise hmm_vma_fault will add same range to the list, this will cause loop in the list because range->next point to range itself. Add function untrack_invalid_user_pages to reduce code duplication. Signed-off-by:
-
Philip Yang authored
Only select HMM_MIRROR will get kernel config dependency warnings if CONFIG_HMM is missing in the config. Add depends on HMM will solve the issue. Add conditional compilation to fix compilation errors if HMM_MIRROR is not enabled as HMM config is not enabled. Remove unused function amdgpu_ttm_tt_mark_user_pages. Signed-off-by:
-
Philip Yang authored
Use HMM helper function hmm_vma_fault() to get physical pages backing userptr and start CPU page table update track of those pages. Then use hmm_vma_range_done() to check if those pages are updated before amdgpu_cs_submit for gfx or before user queues are resumed for kfd. If userptr pages are updated, for gfx, amdgpu_cs_ioctl will restart from scratch, for kfd, restore worker is rescheduled to retry. HMM simplify the CPU page table concurrent update check, so remove guptasklock, mmu_invalidations, last_set_pages fields from amdgpu_ttm_tt struct. HMM does not pin the page (increase page ref count), so remove related operations like release_pages(), put_page(), mark_page_dirty(). Signed-off-by:
-
