- 03 Feb, 2006 40 commits
-
-
Bjorn Helgaas authored
There's no reason MAX_HWIFS needs to be ia64-specific, so set MAX_HWIFS from CONFIG_IDE_MAX_HWIFS. This reduces the default from 10 to 4, but I don't think that's a problem. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by:
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jason Gaston authored
Signed-off-by:
Jason Gaston <Jason.d.gaston@intel.com> Acked-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by:
-
Jayachandran C authored
While looking to the report by Coverity in ipmi, I came across the following issue: The IPMI message handler relies on two defines which are the same -one in include/linux/ipmi.h #define IPMI_NUM_CHANNELS 0x10 and one in drivers/char/ipmi/ipmi_msghandler. #define IPMI_MAX_CHANNELS 16 These are used interchangeably in ipmi_msghandler.c, but since the array addr->channels[] is of size IPMI_MAX_CHANNELS, I have made a patch that uses IPMI_MAX_CHANNELS for all the checks for the array index. NOTE: You could probably remove the line that defines IPMI_NUM_CHANNELS from ipmi.h, or move IPMI_MAX_CHANNELS to ipmi.h Signed-off-by:
Jayachandran C. <c.jayachandran@gmail.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by:
-
Jayachandran C authored
This patch fixes an issue in fs/udf/namei.c reported by Coverity: Error reported(1776) CID: 1776 Checker: UNUSED_VALUE (help) File: fs/udf/namei.c Function: udf_lookup Description: Pointer returned from "udf_find_entry" is never used Patch description: remove unused variable fi. Signed-off-by:
-
KAMBAROV, ZAUR authored
It's doing if (obh) <stuff> else dereference obh So presumably `obh' is never null in there. This defect was found automatically by Coverity Prevent, a static analysis tool. Signed-off-by:
Zaur Kambarov <zkambarov@coverity.com> Signed-off-by:
-
Vincent Hanquez authored
Fix incorrect nlink of root inode for filesystems that use simple_fill_super(). Signed-off-by:
Vincent Hanquez <vincent@snarc.org> Cc: Greg KH <gregkh@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Karsten Keil authored
drivers/isdn/hisax/hscx_irq.c: In function `hscx_interrupt': drivers/isdn/hisax/hscx_irq.c:201: warning: comparison is always 1 due to width of bit-field It's due to (PACKET_NOACK != bcs->tx_skb->pkt_type) pkt_type is only three bit wide. I think this should fix it for the moment, pkt_type 7 is not used yet and this is only used internal in hisax. Signed-off-by:
Karsten keil <kkeil@suse.de> Signed-off-by:
-
Andrew Morton authored
With Eric's "i386: Add a temporary to make put_user more type safe" patch we get a pile of warnings out of ip2m1in.c: drivers/char/ip2main.c: In function `ip2_ipl_ioctl': drivers/char/ip2main.c:2910: warning: assignment makes integer from pointer without a cast drivers/char/ip2main.c:2911: warning: assignment makes integer from pointer without a cast drivers/char/ip2main.c:2912: warning: assignment makes integer from pointer without a cast etc. This ioctl is copying the kernel virtual address of a large number of functions out to userspace. Heaven knows why. Rather than fixing the warnings, I think we'll just nuke that code. The patch also fixes a couple of `defined but not used' warnings. Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Davi Arnaut authored
In the small window between strnlen_user() and copy_from_user() userspace could alter the terminating `\0' character. Signed-off-by:
Davi Arnaut <davi.arnaut@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
-
Eric W. Biederman authored
By including version.h edac_mc was rebuilding on every incremental build. Which defeats the point of incremental builds. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
OGAWA Hirofumi authored
The truncate() should write the file size before writing the new EOF entry. This patch fixes it. This bug was pointed out by Machida Hiroyuki. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
OGAWA Hirofumi authored
The ll_rw_block() needs to get ref-count only if it submits a buffer(). This patch avoids the needless get/put of ref-count. Signed-off-by:
-
OGAWA Hirofumi authored
This patch replaces an own implementation with LL_RW_BLOCK(SWRITE,) which was newly added. Signed-off-by:
-
Andrew Morton authored
Five callsites. I dunno how all this crap got back in there :( Signed-off-by:
-
Paul Fulghum authored
Change locking in the new tty buffering facility from using tty->read_lock, which is currently ignored by drivers and thus ineffective. New locking uses a new tty buffering specific lock enforced centrally in the tty buffering code. Two drivers (esp and cyclades) are updated to use the tty buffering functions instead of accessing tty buffering internals directly. This is required for the new locking to work. Minor checks for NULL buffers added to tty_prepare_flip_string/tty_prepare_flip_string_flags Signed-off-by:
Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Alexey Dobriyan authored
On mips: drivers/char/ipmi/ipmi_si_intf.c:1274: error: conflicting types for 'mem_inb' include/asm/io.h:436: error: previous definition of 'mem_inb' was here Don't look at line 436 unless you really know what you're doing. Move those static functions out of more or less generic namespace. Signed-off-by:
Alexey "## should be banned" Dobriyan <adobriyan@gmail.com> Acked-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
Fernando Luis Vazquez Cao authored
The compilation of kexec/kdump seems to be broken for x86_64. Remove the dependency of kexec on CONFIG_IA32_EMULATION. Signed-off-by:
Fernando Vazquez <fernando@intellilink.co.jp> Signed-off-by:
-
Paul E. McKenney authored
Fix to broken comment to synchronize_rcu() noted by Keith Owens. Also add sentence noting that synchronize_sched() and synchronize_rcu() are not necessarily identical. Signed-off-by:
Paul E. McKenney <paulmck@us.ibm.com> Cc: Keith Owens <kaos@sgi.com> Cc: Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
Herbert Poetzl authored
The quota check in ext2_new_inode() returns ENOSPC where it should return EDQUOT instead. Signed-off-by:
Herbert Pötzl <herbert@13thfloor.at> Acked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Zhang, Yanmin authored
The patch implements cpu topology exportation by sysfs. Items (attributes) are similar to /proc/cpuinfo. 1) /sys/devices/system/cpu/cpuX/topology/physical_package_id: represent the physical package id of cpu X; 2) /sys/devices/system/cpu/cpuX/topology/core_id: represent the cpu core id to cpu X; 3) /sys/devices/system/cpu/cpuX/topology/thread_siblings: represent the thread siblings to cpu X in the same core; 4) /sys/devices/system/cpu/cpuX/topology/core_siblings: represent the thread siblings to cpu X in the same physical package; To implement it in an architecture-neutral way, a new source file, driver/base/topology.c, is to export the 5 attributes. If one architecture wants to support this feature, it just needs to implement 4 defines, typically in file include/asm-XXX/topology.h. The 4 defines are: #define topology_physical_package_id(cpu) #define topology_core_id(cpu) #define topology_thread_siblings(cpu) #define topology_core_siblings(cpu) The type of **_id is int. The type of siblings is cpumask_t. To be consistent on all architectures, the 4 attributes should have deafult values if their values are unavailable. Below is the rule. 1) physical_package_id: If cpu has no physical package id, -1 is the default value. 2) core_id: If cpu doesn't support multi-core, its core id is 0. 3) thread_siblings: Just include itself, if the cpu doesn't support HT/multi-thread. 4) core_siblings: Just include itself, if the cpu doesn't support multi-core and HT/Multi-thread. So be careful when declaring the 4 defines in include/asm-XXX/topology.h. If an attribute isn't defined on an architecture, it won't be exported. Thank Nathan, Greg, Andi, Paul and Venki. The patch provides defines for i386/x86_64/ia64. Signed-off-by:
Zhang, Yanmin <yanmin.zhang@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Alexey Dobriyan authored
j->write_buffer_rp is a pointer. Signed-off-by:
-
Peter Williams authored
The implementation of int_sqrt() assumes that longs have 32 bits. On systems that have 64 bit longs this will result in gross errors when the argument to the function is greater than 2^32 - 1 on such systems. I doubt whether any such use is currently made of int_sqrt() but the attached patch fixes the problem anyway. Signed-off-by:
Peter Williams <pwil3058@bigpond.com.au> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Herbert Poetzl authored
The already removed sync_dquots_dev(dev,type) is still defined in the no-quota case. Signed-off-by:
-
Adrian Bunk authored
- jsm_driver.c: remove the now unused jsm_rawreadok module_param - jsm_tty.c: remove a now unused variable Is there any problem with removing the now useless jsm_rawreadok module_param? Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: V. Ananda Krishnan <mansarov@us.ibm.com> Signed-off-by:
-
V. Ananda Krishnan authored
Signed-off-by:
V. Ananda Krishnan <mansarov@us.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
dean gaudet authored
There is code in setfl() which attempts to preserve the O_APPEND flag on IS_APPEND files... however IS_APPEND files could also be opened O_RDONLY and in that case setfl() should not require O_APPEND... coreutils 5.93 tail -f attempts to set O_NONBLOCK even on regular files... unfortunately if you try this on an append-only log file the result is this: fcntl64(3, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE) fcntl64(3, F_SETFL, O_RDONLY|O_NONBLOCK|O_LARGEFILE) = -1 EPERM (Operation not permitted) I offer up the patch below as one way of fixing the problem... i've tested it fixes the problem with tail -f but haven't really tested beyond that. (I also reported the coreutils bug upstream... it shouldn't fail imho... <https://savannah.gnu.org/bugs/index.php?func=detailitem&item_id=15473>) Signed-off-by:
dean gaudet <dean@arctic.org> Cc: Al Viro <viro@ftp.linux.org.uk> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Markus Lidel authored
- This controller violates the I2O spec for the I/O registers. The patch contains a workaround which moves the registers to the proper location. (originally author: Matthew Starzewski) - If a message frame is beyond the mapped address range a error is returned. Signed-off-by:
Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by:
-
Markus Lidel authored
If PCI device is enabled before probing, it will not be disabled at exit. Signed-off-by:
-
Jeff Moyer authored
Currently, if you open a file O_DIRECT, truncate it to a size that is not a multiple of the disk block size, and then try to read the last block in the file, the read will return 0. The problem is in do_direct_IO, here: /* Handle holes */ if (!buffer_mapped(map_bh)) { char *kaddr; ... if (dio->block_in_file >= i_size_read(dio->inode)>>blkbits) { /* We hit eof */ page_cache_release(page); goto out; } We shift off any remaining bytes in the final block of the I/O, resulting in a 0-sized read. I've attached a patch that fixes this. I'm not happy about how ugly the math is getting, so suggestions are more than welcome. I've tested this with a simple program that performs the steps outlined for reproducing the problem above. Without the patch, we get a 0-sized result from read. With the patch, we get the correct return value from the short read. Signed-off-by:Jeff Moyer <jmoyer@redhat.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Suparna Bhattacharya <suparna@in.ibm.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Joel Becker <Joel.Becker@oracle.com> Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com> Signed-off-by:
-
Carsten Otte authored
In case we have CONFIG_FS_XIP, ext2_show_options shows "xip" if EXT2_MOUNT_XIP mount flag is set. Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
schwab@suse.de authored
Don't compute and display the per-irq sums on ia64 either, too much overhead for mostly useless figures. Cc: Olaf Hering <olh@suse.de> Acked-by:
"Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
Randy Dunlap authored
drivers/edac/e752x_edac.c:1042:7: warning: obsolete struct initializer, use C99 syntax Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Randy Dunlap authored
kernel/cpuset.c:644:38: warning: non-ANSI function declaration of function 'cpuset_update_task_memory_state' Signed-off-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
-
Arnaud Giersch authored
Remove dead address for David Campbell in MAINTAINERS. Signed-off-by:
Arnaud Giersch <arnaud.giersch@free.fr> Signed-off-by:
-
Arnaud Giersch authored
Fix documentation to actually match the code. Signed-off-by:
-
George Anzinger authored
- In case of a negative nsec value the result of the division must be normalized. - Remove inline from an exported function. Signed-off-by:
George Anzinger <george@wildturkeyranch.net> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Latchesar Ionkov authored
When v9fs_mux_rpc sends a 9P message, it may be put in the queue of unsent request. If the user process receives a signal, v9fs_mux_rpc sets the request error to ERREQFLUSH and assigns NULL to request's send message. If the message was still in the unsent queue, v9fs_write_work would produce an oops while processing it. The patch makes sure that requests that are being flushed are moved to the pending requests queue safely. If a request is being flushed, don't remove it from the list of pending requests even if it receives a reply before the flush is acknoledged. The request will be removed during from the Rflush handler (v9fs_mux_flush_cb). Signed-off-by:
Latchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org> Signed-off-by:
-
Latchesar Ionkov authored
v9fs_put_str used to store pointer to the source string, instead of the cbuf copy. This patch corrects it. Signed-off-by:
-
Latchesar Ionkov authored
Two symlink fixes, v9fs_readlink didn't copy the last character of the symlink name, v9fs_vfs_follow_link incorrectly called strlen of newly allocated buffer instead of PATH_MAX. Signed-off-by:
-
Arnaud Giersch authored
Add support for the built-in parallel port on SGI O2 (a.k.a. IP32). Define a new configuration option: PARPORT_IP32. The module is named parport_ip32. Hardware support for SPP, EPP and ECP modes along with DMA support when available are currently implemented. Signed-off-by:
-
