Presently 'flags' gets passed around a lot between the various ioremap
helpers and implementations, which is only 32-bits. In the X2TLB case
we use 64-bit pgprots which presently results in the upper 32bits being
chopped off (which handily include our read/write/exec permissions).

As such, we convert everything internally to using pgprot_t directly and
simply convert over with pgprot_val() where needed. With this in place,
transparent fixmap utilization for early ioremap works as expected.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The mem_init_done test makes sure that this path is only entered in
__init cases, so leaving ioremap_fixed() as __init and flagging the
caller __init_refok is sufficient.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

iounmap() should balance whatever is done by ioremap(). Presently
ioremap() can do any of fixed mappings, PMB mappings, or page table
mappings. Presently only the latter two are handled through the standard
unmap path, so tie in the fixed unmapping, too.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This converts iounmap_fixed() to return success/error if it handled the
unmap request or not. At the same time, drop the __init label, as this
can be called in to later.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

There is nothing of interest in the _64 version anymore, so the _32 one
can be renamed and used unconditionally.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Presently the fixed ioremap API is only defined when CONFIG_IOREMAP_FIXED
is set. As we want to call in to it unconditionally, provide a stubbed
out interface.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds in a mem_init_done to work out when a standard ioremap() is
possible, falling back to the fixmap based ioremap otherwise.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This tosses in a local_irq_enable()/disable() pair around the init_fpu()
callsite in the FPU state restore exception handler. Fixes up a slab BUG
triggered by making a slab cache allocation that can sleep whilst
irqs_disabled(). This follows the behaviour undertaken by the x86
implementation.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

More and more boards are going to start shipping that boot with the MMU
in 32BIT mode by default. Previously we relied on the bootloader to
setup PMB mappings for use by the kernel but we also need to cater for
boards whose bootloaders don't set them up.

If CONFIG_PMB_LEGACY is not enabled we have full control over our PMB
mappings and can compress our address space. Usually, the distance
between the the cached and uncached mappings of RAM is always 512MB,
however we can compress the distance to be the amount of RAM on the
board.

pmb_init() now becomes much simpler. It no longer has to calculate any
mappings, it just has to synchronise the software PMB table with the
hardware.

Tested on SDK7786 and SH7785LCR.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  do_add_mount() should sanitize mnt_flags
  CIFS shouldn't make mountpoints shrinkable
  mnt_flags fixes in do_remount()
  attach_recursive_mnt() needs to hold vfsmount_lock over set_mnt_shared()
  may_umount() needs namespace_sem
  Fix configfs leak
  Fix the -ESTALE handling in do_filp_open()
  ecryptfs: Fix refcnt leak on ecryptfs_follow_link() error path
  Fix ACC_MODE() for real
  Unrot uml mconsole a bit
  hppfs: handle ->put_link()
  Kill 9p readlink()
  fix autofs/afs/etc. magic mountpoint breakage

The sym_is() compares a symbol in an attempt to automatically skip symbol
prefixes.  It does this first by searching the real symbol with the normal
unprefixed symbol.  But then it uses the length of the original symbol to
check the end of the substring instead of the length of the symbol it is
looking for.  On non-prefixed arches, this is effectively the same thing,
so there is no problem.  On prefixed-arches, since this is exceeds by just
one byte, a crash is rare and it is usually a NUL byte anyways.  But every
once in a blue moon, you get the right page alignment and it segfaults.

For example, on the Blackfin arch, sym_is() will be called with the real
symbol "___mod_usb_device_table" as "symbol" when looking for the normal
symbol "__mod_usb_device_table" as "name".  The substring will thus return
one byte into "symbol" and store it into "match".  But then "match" will
be indexed with the length of "symbol" instead of "name" and so we will
exceed the storage.  i.e. the code ends up doing:
	char foo[] = "abc"; return foo[strlen(foo)+1] == '\0';
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit f2260e6b (page allocator: update NR_FREE_PAGES only as necessary)
made one minor regression.  if __rmqueue() was failed, NR_FREE_PAGES stat
go wrong.  this patch fixes it.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reported-by: Huang Shijie <shijie8@gmail.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Do not use device name after device_unregister
  i2c/pca: Don't use *_interruptible
  i2c-ali1563: Remove sparse warnings
  i2c: Test off by one in {piix4,vt596}_transaction()
  i2c-core: Storage class should be before const qualifier

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, uv: Ensure hub revision set for all ACPI modes.
  x86, uv: Add function retrieving node controller revision number
  x86: xen: 64-bit kernel RPL should be 0
  x86: kernel_thread() -- initialize SS to a known state
  x86/agp: Fix agp_amd64_init and agp_amd64_cleanup
  x86: SGI UV: Fix mapping of MMIO registers
  x86: mce.h: Fix warning in header checks

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futexes: Remove rw parameter from get_futex_key()

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Check if /dev/null can be used as the -o gcc argument
  perf tools: Move QUIET_STDERR def to before first use
  perf: Stop stack frame walking off kernel addresses boundaries

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing/filters: Add comment for match callbacks
  tracing/filters: Fix MATCH_FULL filter matching for PTR_STRING
  tracing/filters: Fix MATCH_MIDDLE_ONLY filter matching
  lib: Introduce strnstr()
  tracing/filters: Fix MATCH_END_ONLY filter matching
  tracing/filters: Fix MATCH_FRONT_ONLY filter matching
  ftrace: Fix MATCH_END_ONLY function filter
  tracing/x86: Derive arch from bits argument in recordmcount.pl
  ring-buffer: Add rb_list_head() wrapper around new reader page next field
  ring-buffer: Wrap a list.next reference with rb_list_head()

Fix divide by zero and broken output.  Commit 600ce1a0 ("fix clock
setting for Samsung SoC Framebuffer") introduced a mandatory refresh
parameter to the platform data for the S3C framebuffer but did not
introduce any validation code, causing existing platforms (none of which
have refresh set) to divide by zero whenever the framebuffer is
configured, generating warnings and unusable output.

Ben Dooks noted several problems with the patch:

 - The platform data supplies the pixclk directly and should already
   have taken care of the refresh rate.
 - The addition of a window ID parameter doesn't help since only the
   root framebuffer can control the pixclk.
 - pixclk is specified in picoseconds (rather than Hz) as the patch
   assumed.

and suggests reverting the commit so do that.  Without fixing this no
mainline user of the driver will produce output.

[akpm@linux-foundation.org: don't revert the correct bit]
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: InKi Dae <inki.dae@samsung.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix a problem in NOMMU mmap with ramfs whereby a shared mmap can happen
over the end of a truncation.  The problem is that
ramfs_nommu_check_mappings() checks that the reduced file size against the
VMA tree, but not the vm_region tree.

The following sequence of events can cause the problem:

	fd = open("/tmp/x", O_RDWR|O_TRUNC|O_CREAT, 0600);
	ftruncate(fd, 32 * 1024);
	a = mmap(NULL, 32 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
	b = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
	munmap(a, 32 * 1024);
	ftruncate(fd, 16 * 1024);
	c = mmap(NULL, 32 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);

Mapping 'a' creates a vm_region covering 32KB of the file.  Mapping 'b'
sees that the vm_region from 'a' is covering the region it wants and so
shares it, pinning it in memory.

Mapping 'a' then goes away and the file is truncated to the end of VMA
'b'.  However, the region allocated by 'a' is still in effect, and has
_not_ been reduced.

Mapping 'c' is then created, and because there's a vm_region covering the
desired region, get_unmapped_area() is _not_ called to repeat the check,
and the mapping is granted, even though the pages from the latter half of
the mapping have been discarded.

However:

	d = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);

Mapping 'd' should work, and should end up sharing the region allocated by
'a'.

To deal with this, we shrink the vm_region struct during the truncation,
lest do_mmap_pgoff() take it as licence to share the full region
automatically without calling the get_unmapped_area() file op again.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the race between the truncation of a ramfs file and an attempt to make
a shared mmap of region of that file.

The problem is that do_mmap_pgoff() calls f_op->get_unmapped_area() to
verify that the file region is made of contiguous pages and to find its
base address - but there isn't any locking to guarantee this region until
vma_prio_tree_insert() is called by add_vma_to_mm().

Note that moving the functionality into f_op->mmap() doesn't help as that
is also called before vma_prio_tree_insert().

Instead make ramfs_nommu_check_mappings() grab nommu_region_sem whilst it
does its checks.  This means that this function will wait whilst mmaps
take place.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

get_unmapped_area() is unnecessary for NOMMU as no-one calls it.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In split_vma(), there's no need to check if the VMA being split has a
region that's in use by more than one VMA because:

 (1) The preceding test prohibits splitting of non-anonymous VMAs and regions
     (eg: file or chardev backed VMAs).

 (2) Anonymous regions can't be mapped multiple times because there's no handle
     by which to refer to the already existing region.

 (3) If a VMA has previously been split, then the region backing it has also
     been split into two regions, each of usage 1.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The vm_usage count field in struct vm_region does not need to be atomic as
it's only even modified whilst nommu_region_sem is write locked.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit c4caa778 ("file
->get_unmapped_area() shouldn't duplicate work of get_unmapped_area()")
broke SYSV SHM for NOMMU by taking away the pointer to
shm_get_unmapped_area() from shm_file_operations.

Put it back conditionally on CONFIG_MMU=n.

file->f_ops->get_unmapped_area() is used to find out the base address for a
mapping of a mappable chardev device or mappable memory-based file (such as a
ramfs file).  It needs to be called prior to file->f_ops->mmap() being called.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The function prototype mismatches in call stack:

                [<ffffffff81494268>] print_block_size+0x58/0x60
                [<ffffffff81487e3f>] sysdev_class_show+0x1f/0x30
                [<ffffffff811d629b>] sysfs_read_file+0xcb/0x1f0
                [<ffffffff81176328>] vfs_read+0xc8/0x180

Due to prototype mismatch, print_block_size() will sprintf() into
*attribute instead of *buf, hence user space will read the initial
zeros from *buf:
	$ hexdump /sys/devices/system/memory/block_size_bytes
	0000000 0000 0000 0000 0000
	0000008

After patch:
	cat /sys/devices/system/memory/block_size_bytes
	0x8000000

This complements commits c29af9636 and 4a0b2b4d.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: "Zheng, Shaohui" <shaohui.zheng@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Current mem_cgroup_force_empty() only ensures mem->res.usage == 0 on
success.  But this doesn't guarantee memcg's LRU is really empty, because
there are some cases in which !PageCgrupUsed pages exist on memcg's LRU.

For example:
- Pages can be uncharged by its owner process while they are on LRU.
- race between mem_cgroup_add_lru_list() and __mem_cgroup_uncharge_common().

So there can be a case in which the usage is zero but some of the LRUs are not empty.

OTOH, mem_cgroup_del_lru_list(), which can be called asynchronously with
rmdir, accesses the mem_cgroup, so this access can cause a problem if it
races with rmdir because the mem_cgroup might have been freed by rmdir.

Actually, I saw a bug which seems to be caused by this race.

	[1530745.949906] BUG: unable to handle kernel NULL pointer dereference at 0000000000000230
	[1530745.950651] IP: [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80
	[1530745.950651] PGD 3863de067 PUD 3862c7067 PMD 0
	[1530745.950651] Oops: 0002 [#1] SMP
	[1530745.950651] last sysfs file: /sys/devices/system/cpu/cpu7/cache/index1/shared_cpu_map
	[1530745.950651] CPU 3
	[1530745.950651] Modules linked in: configs ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp nfsd nfs_acl auth_rpcgss exportfs autofs4 hidp rfcomm l2cap crc16 bluetooth lockd sunrpc ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_multipath scsi_dh video output sbs sbshc battery ac lp kvm_intel kvm sg ide_cd_mod cdrom serio_raw tpm_tis tpm tpm_bios acpi_memhotplug button parport_pc parport rtc_cmos rtc_core rtc_lib e1000 i2c_i801 i2c_core pcspkr dm_region_hash dm_log dm_mod ata_piix libata shpchp megaraid_mbox sd_mod scsi_mod megaraid_mm ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table]
	[1530745.950651] Pid: 19653, comm: shmem_test_02 Tainted: G   M       2.6.32-mm1-00701-g2b04386 #3 Express5800/140Rd-4 [N8100-1065]
	[1530745.950651] RIP: 0010:[<ffffffff810fbc11>]  [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80
	[1530745.950651] RSP: 0018:ffff8803863ddcb8  EFLAGS: 00010002
	[1530745.950651] RAX: 00000000000001e0 RBX: ffff8803abc02238 RCX: 00000000000001e0
	[1530745.950651] RDX: 0000000000000000 RSI: ffff88038611a000 RDI: ffff8803abc02238
	[1530745.950651] RBP: ffff8803863ddcc8 R08: 0000000000000002 R09: ffff8803a04c8643
	[1530745.950651] R10: 0000000000000000 R11: ffffffff810c7333 R12: 0000000000000000
	[1530745.950651] R13: ffff880000017f00 R14: 0000000000000092 R15: ffff8800179d0310
	[1530745.950651] FS:  0000000000000000(0000) GS:ffff880017800000(0000) knlGS:0000000000000000
	[1530745.950651] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
	[1530745.950651] CR2: 0000000000000230 CR3: 0000000379d87000 CR4: 00000000000006e0
	[1530745.950651] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
	[1530745.950651] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
	[1530745.950651] Process shmem_test_02 (pid: 19653, threadinfo ffff8803863dc000, task ffff88038612a8a0)
	[1530745.950651] Stack:
	[1530745.950651]  ffffea00040c2fe8 0000000000000000 ffff8803863ddd98 ffffffff810c739a
	[1530745.950651] <0> 00000000863ddd18 000000000000000c 0000000000000000 0000000000000000
	[1530745.950651] <0> 0000000000000002 0000000000000000 ffff8803863ddd68 0000000000000046
	[1530745.950651] Call Trace:
	[1530745.950651]  [<ffffffff810c739a>] release_pages+0x142/0x1e7
	[1530745.950651]  [<ffffffff810c778f>] ? pagevec_move_tail+0x6e/0x112
	[1530745.950651]  [<ffffffff810c781e>] pagevec_move_tail+0xfd/0x112
	[1530745.950651]  [<ffffffff810c78a9>] lru_add_drain+0x76/0x94
	[1530745.950651]  [<ffffffff810dba0c>] exit_mmap+0x6e/0x145
	[1530745.950651]  [<ffffffff8103f52d>] mmput+0x5e/0xcf
	[1530745.950651]  [<ffffffff81043ea8>] exit_mm+0x11c/0x129
	[1530745.950651]  [<ffffffff8108fb29>] ? audit_free+0x196/0x1c9
	[1530745.950651]  [<ffffffff81045353>] do_exit+0x1f5/0x6b7
	[1530745.950651]  [<ffffffff8106133f>] ? up_read+0x2b/0x2f
	[1530745.950651]  [<ffffffff8137d187>] ? lockdep_sys_exit_thunk+0x35/0x67
	[1530745.950651]  [<ffffffff81045898>] do_group_exit+0x83/0xb0
	[1530745.950651]  [<ffffffff810458dc>] sys_exit_group+0x17/0x1b
	[1530745.950651]  [<ffffffff81002c1b>] system_call_fastpath+0x16/0x1b
	[1530745.950651] Code: 54 53 0f 1f 44 00 00 83 3d cc 29 7c 00 00 41 89 f4 75 63 eb 4e 48 83 7b 08 00 75 04 0f 0b eb fe 48 89 df e8 18 f3 ff ff 44 89 e2 <48> ff 4c d0 50 48 8b 05 2b 2d 7c 00 48 39 43 08 74 39 48 8b 4b
	[1530745.950651] RIP  [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80
	[1530745.950651]  RSP <ffff8803863ddcb8>
	[1530745.950651] CR2: 0000000000000230
	[1530745.950651] ---[ end trace c3419c1bb8acc34f ]---
	[1530745.950651] Fixing recursive fault but reboot is needed!

The problem here is pages on LRU may contain pointer to stale memcg.  To
make res->usage to be 0, all pages on memcg must be uncharged or moved to
another(parent) memcg.  Moved page_cgroup have already removed from
original LRU, but uncharged page_cgroup contains pointer to memcg withou
PCG_USED bit.  (This asynchronous LRU work is for improving performance.)
If PCG_USED bit is not set, page_cgroup will never be added to memcg's
LRU.  So, about pages not on LRU, they never access stale pointer.  Then,
what we have to take care of is page_cgroup _on_ LRU list.  This patch
fixes this problem by making mem_cgroup_force_empty() visit all LRUs
before exiting its loop and guarantee there are no pages on its LRU.
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix fixes the following warnings by renaming the driver structures to be
suffixed with _driver.

WARNING: drivers/virtio/virtio_balloon.o(.data+0x88): Section mismatch in reference from the variable virtio_balloon to the function .devexit.text:virtballoon_remove()

WARNING: drivers/char/hw_random/virtio-rng.o(.data+0x88): Section mismatch in reference from the variable virtio_rng to the function .devexit.text:virtrng_remove()
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit f50de2d3 (vmscan: have kswapd sleep for a short interval and double
check it should be asleep) can cause kswapd to enter an infinite loop if
running on a single-CPU system.  If all zones are unreclaimble,
sleeping_prematurely return 1 and kswapd will call balance_pgdat() again.
but it's totally meaningless, balance_pgdat() doesn't anything against
unreclaimable zone!
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Reported-by: Will Newton <will.newton@gmail.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Tested-by: Will Newton <will.newton@gmail.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The change in acpi_cpufreq to use smp_call_function_any causes a warning
when it is called since the function erroneously passes the cpu id to
cpumask_of_node rather than the node that the cpu is on.  Fix this.

cpumask_of_node(3): node > nr_node_ids(1)
Pid: 1, comm: swapper Not tainted 2.6.33-rc3-00097-g2c1f1895 #223
Call Trace:
 [<ffffffff81028bb3>] cpumask_of_node+0x23/0x58
 [<ffffffff81061f51>] smp_call_function_any+0x65/0xfa
 [<ffffffff810160d1>] ? do_drv_read+0x0/0x2f
 [<ffffffff81015fba>] get_cur_val+0xb0/0x102
 [<ffffffff81016080>] get_cur_freq_on_cpu+0x74/0xc5
 [<ffffffff810168a7>] acpi_cpufreq_cpu_init+0x417/0x515
 [<ffffffff81562ce9>] ? __down_write+0xb/0xd
 [<ffffffff8148055e>] cpufreq_add_dev+0x278/0x922
Signed-off-by: David John <davidjon@xenontk.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add BUILD_BUG_ON_NOT_POWER_OF_2()

When code relies on a constant being a power of 2:

	#define FOO	512	/* must be a power of 2 */

it would be nice to be able to do:

	BUILD_BUG_ON(!is_power_of_2(FOO));

However applying an inline function does not result in a compile-time
constant that can be used with BUILD_BUG_ON(), so trying that gives
results in:

	error: bit-field '<anonymous>' width not an integer constant

As suggested by akpm, rather than monkeying around with is_power_of_2()
and risking gcc warts about constant expressions, just create a macro
BUILD_BUG_ON_NOT_POWER_OF_2() to encapsulate this common requirement.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: David Dillow <dave@thedillows.org>
Cc: "Robert P. J. Day" <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The current check for 'backward merging' within add_active_range() does
not seem correct.  start_pfn must be compared against
early_node_map[i].start_pfn (and NOT against .end_pfn) to find out whether
the new region is backward-mergeable with the existing range.
Signed-off-by: Kazuhisa Ichikawa <ki@epsilou.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On my first try using them I missed that the fifos need to be power of
two, resulting in a runtime bug.  Document that requirement everywhere
(and fix one grammar bug)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Simple inline that checks if kfifo_init() has been executed on a fifo.

This is useful for walking all per CPU fifos, when some of them might not
have been brought up yet.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In some upcoming code it's useful to peek into a FIFO without permanentely
removing data.  This patch implements a new kfifo_out_peek() to do this.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Right now for kfifo_*_user it's not easily possible to distingush between
a user copy failing and the FIFO not containing enough data.  The problem
is that both conditions are multiplexed into the same return code.

Avoid this by moving the "copy length" into a separate output parameter
and only return 0/-EFAULT in the main return value.

I didn't fully adapt the weird "record" variants, those seem
to be unused anyways and were rather messy (should they be just removed?)

I would appreciate some double checking if I did all the conversions
correctly.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The pointers to user buffers are currently unsigned char *, which requires
a lot of casting in the caller for any non-char typed buffers.  Use void *
instead.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I get a few dozen of these warnings when using
  gcc (GCC) 4.4.1 20090725 (Red Hat 4.4.1-2):

In file included from mmotm-2010-0113-1217/init/do_mounts.c:5:
mmotm-2010-0113-1217/include/linux/tty.h: In function 'tty_port_get':
mmotm-2010-0113-1217/include/linux/tty.h:469: warning: '______f' is static but declared in inline function 'tty_port_get' which is not static

so make the function static inline.

[akpm@linux-foundation.org: may as well convert tty_port_users() also]
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>