- 29 Jun, 2017 13 commits
-
-
Edward Cree authored
When filter insertion fails with no rollback, we were trying to convert EFX_EF10_FILTER_ID_INVALID to an id to store in 'ids' (which is either vlan->uc or vlan->mc). This would WARN_ON_ONCE and then record a bogus filter ID of 0x1fff, neither of which is a good thing. Fixes: 0ccb998b ("sfc: fix filter_id misinterpretation in edge case") Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Kubeček authored
Recently I started seeing warnings about pages with refcount -1. The problem was traced to packets being reused after their head was merged into a GRO packet by skb_gro_receive(). While bisecting the issue pointed to commit c21b48cc ("net: adjust skb->truesize in ___pskb_trim()") and I have never seen it on a kernel with it reverted, I believe the real problem appeared earlier when the option to merge head frag in GRO was implemented. Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE branch of napi_skb_finish() so that if the driver uses napi_gro_frags() and head is merged (which in my case happens after the skb_condense() call added by the commit mentioned above), the skb is reused including the head that has been merged. As a result, we release the page reference twice and eventually end up with negative page refcount. To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish() the same way it's done in napi_skb_finish(). Fixes: d7e8883c ("net: make GRO aware of skb->head_frag") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Daniel Borkmann authored
Leaking kernel addresses on unpriviledged is generally disallowed, for example, verifier rejects the following: 0: (b7) r0 = 0 1: (18) r2 = 0xffff897e82304400 3: (7b) *(u64 *)(r1 +48) = r2 R2 leaks addr into ctx Doing pointer arithmetic on them is also forbidden, so that they don't turn into unknown value and then get leaked out. However, there's xadd as a special case, where we don't check the src reg for being a pointer register, e.g. the following will pass: 0: (b7) r0 = 0 1: (7b) *(u64 *)(r1 +48) = r0 2: (18) r2 = 0xffff897e82304400 ; map 4: (db) lock *(u64 *)(r1 +48) += r2 5: (95) exit We could store the pointer into skb->cb, loose the type context, and then read it out from there again to leak it eventually out of a map value. Or more easily in a different variant, too: 0: (bf) r6 = r1 1: (7a) *(u64 *)(r10 -8) = 0 2: (bf) r2 = r10 3: (07) r2 += -8 4: (18) r1 = 0x0 6: (85) call bpf_map_lookup_elem#1 7: (15) if r0 == 0x0 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp 8: (b7) r3 = 0 9: (7b) *(u64 *)(r0 +0) = r3 10: (db) lock *(u64 *)(r0 +0) += r6 11: (b7) r0 = 0 12: (95) exit from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp 11: (b7) r0 = 0 12: (95) exit Prevent this by checking xadd src reg for pointer types. Also add a couple of test cases related to this. Fixes: 1be7f75d ("bpf: enable non-root eBPF programs") Fixes: 17a52670 ("bpf: verifier (add verifier core)") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
-
David S. Miller authored
Michael Grzeschik says: ==================== arcnet: Collection of latest fixes Here we sum up the recent fixes I collected on the way to use and stabilise the framework. Part of it is an possible deadlock that we prevent as well to fix the calculation of the dev_id that can be setup by an rotary encoder. Beside that we added an trivial spelling patch and fix some wrong and missing assignments that improves the code footprint. ==================== Signed-off-by: -
Michael Grzeschik authored
We add the pdev data to the pci devices netdev structure. This way the interface get consistent device names in the userspace (udev). Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
-
Michael Grzeschik authored
The dev_id was miscalculated. Only the two bits 4-5 are relevant for the MA1 card. PCIARC1 and PCIFB2 use the four bits 4-7 for id selection. Signed-off-by:
-
Michael Grzeschik authored
The assignment is superfluous. Signed-off-by:
-
Colin Ian King authored
Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Michael Grzeschik authored
This patch prevents the arcnet driver from the following deadlock. [ 41.273910] ====================================================== [ 41.280397] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 41.287433] 4.4.0-00034-gc0ae784 #536 Not tainted [ 41.292366] ------------------------------------------------------ [ 41.298863] arcecho/233 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire: [ 41.305628] (&(&lp->lock)->rlock){+.+...}, at: [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 41.315199] [ 41.315199] and this task is already holding: [ 41.321324] (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8 [ 41.329593] which would create a new lock dependency: [ 41.334893] (_xmit_ARCNET#2){+.-...} -> (&(&lp->lock)->rlock){+.+...} [ 41.341801] [ 41.341801] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 41.350108] (_xmit_ARCNET#2){+.-...} ... which became SOFTIRQ-irq-safe at: [ 41.357539] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.362677] [<c063ab8c>] dev_watchdog+0x5c/0x264 [ 41.367723] [<c0094edc>] call_timer_fn+0x6c/0xf4 [ 41.372759] [<c00950b8>] run_timer_softirq+0x154/0x210 [ 41.378340] [<c0036b30>] __do_softirq+0x144/0x298 [ 41.383469] [<c0036fb4>] irq_exit+0xcc/0x130 [ 41.388138] [<c0085c50>] __handle_domain_irq+0x60/0xb4 [ 41.393728] [<c0014578>] __irq_svc+0x58/0x78 [ 41.398402] [<c0010274>] arch_cpu_idle+0x24/0x3c [ 41.403443] [<c007127c>] cpu_startup_entry+0x1f8/0x25c [ 41.409029] [<c09adc90>] start_kernel+0x3c0/0x3cc [ 41.414170] [ 41.414170] to a SOFTIRQ-irq-unsafe lock: [ 41.419931] (&(&lp->lock)->rlock){+.+...} ... which became SOFTIRQ-irq-unsafe at: [ 41.427996] ... [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.433409] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.439646] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.445063] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.450661] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.455700] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.460649] [<c0050f10>] kthread+0xe4/0xf8 [ 41.465158] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.470207] [ 41.470207] other info that might help us debug this: [ 41.470207] [ 41.478627] Possible interrupt unsafe locking scenario: [ 41.478627] [ 41.485763] CPU0 CPU1 [ 41.490521] ---- ---- [ 41.495279] lock(&(&lp->lock)->rlock); [ 41.499414] local_irq_disable(); [ 41.505636] lock(_xmit_ARCNET#2); [ 41.511967] lock(&(&lp->lock)->rlock); [ 41.518741] <Interrupt> [ 41.521490] lock(_xmit_ARCNET#2); [ 41.525356] [ 41.525356] *** DEADLOCK *** [ 41.525356] [ 41.531587] 1 lock held by arcecho/233: [ 41.535617] #0: (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8 [ 41.544355] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 41.552362] -> (_xmit_ARCNET#2){+.-...} ops: 27 { [ 41.557357] HARDIRQ-ON-W at: [ 41.560664] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.567445] [<c063ba28>] dev_deactivate_many+0x114/0x304 [ 41.574866] [<c063bc3c>] dev_deactivate+0x24/0x38 [ 41.581646] [<c0630374>] linkwatch_do_dev+0x40/0x74 [ 41.588613] [<c06305d8>] __linkwatch_run_queue+0xec/0x140 [ 41.596120] [<c0630658>] linkwatch_event+0x2c/0x34 [ 41.602991] [<c004af30>] process_one_work+0x188/0x40c [ 41.610131] [<c004b200>] worker_thread+0x4c/0x480 [ 41.616912] [<c0050f10>] kthread+0xe4/0xf8 [ 41.623048] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.629735] IN-SOFTIRQ-W at: [ 41.633039] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.639820] [<c063ab8c>] dev_watchdog+0x5c/0x264 [ 41.646508] [<c0094edc>] call_timer_fn+0x6c/0xf4 [ 41.653190] [<c00950b8>] run_timer_softirq+0x154/0x210 [ 41.660425] [<c0036b30>] __do_softirq+0x144/0x298 [ 41.667201] [<c0036fb4>] irq_exit+0xcc/0x130 [ 41.673518] [<c0085c50>] __handle_domain_irq+0x60/0xb4 [ 41.680754] [<c0014578>] __irq_svc+0x58/0x78 [ 41.687077] [<c0010274>] arch_cpu_idle+0x24/0x3c [ 41.693769] [<c007127c>] cpu_startup_entry+0x1f8/0x25c [ 41.701006] [<c09adc90>] start_kernel+0x3c0/0x3cc [ 41.707791] INITIAL USE at: [ 41.711003] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.717696] [<c063ba28>] dev_deactivate_many+0x114/0x304 [ 41.725026] [<c063bc3c>] dev_deactivate+0x24/0x38 [ 41.731718] [<c0630374>] linkwatch_do_dev+0x40/0x74 [ 41.738593] [<c06305d8>] __linkwatch_run_queue+0xec/0x140 [ 41.746011] [<c0630658>] linkwatch_event+0x2c/0x34 [ 41.752789] [<c004af30>] process_one_work+0x188/0x40c [ 41.759847] [<c004b200>] worker_thread+0x4c/0x480 [ 41.766541] [<c0050f10>] kthread+0xe4/0xf8 [ 41.772596] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.779198] } [ 41.780945] ... key at: [<c124d620>] netdev_xmit_lock_key+0x38/0x1c8 [ 41.788192] ... acquired at: [ 41.791309] [<c007bed8>] lock_acquire+0x70/0x90 [ 41.796361] [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54 [ 41.802324] [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 41.808844] [<c06b9380>] packet_direct_xmit+0x130/0x1c8 [ 41.814622] [<c06bc7e4>] packet_sendmsg+0x3b8/0x680 [ 41.820034] [<c05fe8b0>] sock_sendmsg+0x14/0x24 [ 41.825091] [<c05ffd68>] SyS_sendto+0xb8/0xe0 [ 41.829956] [<c05ffda8>] SyS_send+0x18/0x20 [ 41.834638] [<c000f780>] ret_fast_syscall+0x0/0x1c [ 41.839954] [ 41.841514] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 41.850302] -> (&(&lp->lock)->rlock){+.+...} ops: 5 { [ 41.855644] HARDIRQ-ON-W at: [ 41.858945] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.865726] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.873607] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.880666] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.887901] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.894593] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.901195] [<c0050f10>] kthread+0xe4/0xf8 [ 41.907338] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.914025] SOFTIRQ-ON-W at: [ 41.917328] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.924106] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.931981] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.939028] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.946264] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.952954] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.959548] [<c0050f10>] kthread+0xe4/0xf8 [ 41.965689] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.972379] INITIAL USE at: [ 41.975595] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.982283] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.990063] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.997027] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 42.004172] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 42.010766] [<c0087548>] irq_thread+0x13c/0x1dc [ 42.017267] [<c0050f10>] kthread+0xe4/0xf8 [ 42.023314] [<c000f810>] ret_from_fork+0x14/0x24 [ 42.029903] } [ 42.031648] ... key at: [<bf0854cc>] __key.42091+0x0/0xfffff0f8 [arcnet] [ 42.039255] ... acquired at: [ 42.042372] [<c007bed8>] lock_acquire+0x70/0x90 [ 42.047413] [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54 [ 42.053364] [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 42.059872] [<c06b9380>] packet_direct_xmit+0x130/0x1c8 [ 42.065634] [<c06bc7e4>] packet_sendmsg+0x3b8/0x680 [ 42.071030] [<c05fe8b0>] sock_sendmsg+0x14/0x24 [ 42.076069] [<c05ffd68>] SyS_sendto+0xb8/0xe0 [ 42.080926] [<c05ffda8>] SyS_send+0x18/0x20 [ 42.085601] [<c000f780>] ret_fast_syscall+0x0/0x1c [ 42.090918] [ 42.092481] [ 42.092481] stack backtrace: [ 42.097065] CPU: 0 PID: 233 Comm: arcecho Not tainted 4.4.0-00034-gc0ae784 #536 [ 42.104751] Hardware name: Generic AM33XX (Flattened Device Tree) [ 42.111183] [<c0017ec8>] (unwind_backtrace) from [<c00139d0>] (show_stack+0x10/0x14) [ 42.119337] [<c00139d0>] (show_stack) from [<c02a82c4>] (dump_stack+0x8c/0x9c) [ 42.126937] [<c02a82c4>] (dump_stack) from [<c0078260>] (check_usage+0x4bc/0x63c) [ 42.134815] [<c0078260>] (check_usage) from [<c0078438>] (check_irq_usage+0x58/0xb0) [ 42.142964] [<c0078438>] (check_irq_usage) from [<c007aaa0>] (__lock_acquire+0x1524/0x20b0) [ 42.151740] [<c007aaa0>] (__lock_acquire) from [<c007bed8>] (lock_acquire+0x70/0x90) [ 42.159886] [<c007bed8>] (lock_acquire) from [<c06f9140>] (_raw_spin_lock_irqsave+0x40/0x54) [ 42.168768] [<c06f9140>] (_raw_spin_lock_irqsave) from [<bf083bc8>] (arcnet_send_packet+0x60/0x1c0 [arcnet]) [ 42.179115] [<bf083bc8>] (arcnet_send_packet [arcnet]) from [<c06b9380>] (packet_direct_xmit+0x130/0x1c8) [ 42.189182] [<c06b9380>] (packet_direct_xmit) from [<c06bc7e4>] (packet_sendmsg+0x3b8/0x680) [ 42.198059] [<c06bc7e4>] (packet_sendmsg) from [<c05fe8b0>] (sock_sendmsg+0x14/0x24) [ 42.206199] [<c05fe8b0>] (sock_sendmsg) from [<c05ffd68>] (SyS_sendto+0xb8/0xe0) [ 42.213978] [<c05ffd68>] (SyS_sendto) from [<c05ffda8>] (SyS_send+0x18/0x20) [ 42.221388] [<c05ffda8>] (SyS_send) from [<c000f780>] (ret_fast_syscall+0x0/0x1c) Signed-off-by: -
Dan Carpenter authored
My static checker complains that ofdpa_neigh_del() can sometimes free "found". It just makes sense to use it first before deleting it. Fixes: ecf244f7 ("rocker: fix maybe-uninitialized warning") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ido Schimmel authored
In case a VLAN device is enslaved to a bridge we shouldn't create a router interface (RIF) for it when it's configured with an IP address. This is already handled by the driver for other types of netdevs, such as physical ports and LAG devices. If this IP address is then removed and the interface is subsequently unlinked from the bridge, a NULL pointer dereference can happen, as the original 802.1d FID was replaced with an rFID which was then deleted. To reproduce: $ ip link set dev enp3s0np9 up $ ip link add name enp3s0np9.111 link enp3s0np9 type vlan id 111 $ ip link set dev enp3s0np9.111 up $ ip link add name br0 type bridge $ ip link set dev br0 up $ ip link set enp3s0np9.111 master br0 $ ip address add dev enp3s0np9.111 192.168.0.1/24 $ ip address del dev enp3s0np9.111 192.168.0.1/24 $ ip link set dev enp3s0np9.111 nomaster Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Petr Machata <petrm@mellanox.com> Tested-by:
-
Gao Feng authored
When qdisc fail to init, qdisc_create would invoke the destroy callback to cleanup. But there is no check if the callback exists really. So it would cause the panic if there is no real destroy callback like the qdisc codel, fq, and so on. Take codel as an example following: When a malicious user constructs one invalid netlink msg, it would cause codel_init->codel_change->nla_parse_nested failed. Then kernel would invoke the destroy callback directly but qdisc codel doesn't define one. It causes one panic as a result. Now add one the check for destroy to avoid the possible panic. Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jason Wang authored
We don't hold any tx lock when trying to disable TX during reset, this would lead a use after free since ndo_start_xmit() tries to access the virtqueue which has already been freed. Fix this by using netif_tx_disable() before freeing the vqs, this could make sure no tx after vq freeing. Reported-by:
Jean-Philippe Menil <jpmenil@gmail.com> Tested-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Robert McCabe <robert.mccabe@rockwellcollins.com> Signed-off-by:
-
- 27 Jun, 2017 3 commits
-
-
Andrew F. Davis authored
The Belkin B2B128 is a USB 3.0 Hub + Gigabit Ethernet Adapter, the Ethernet adapter uses the ASIX AX88179 USB 3.0 to Gigabit Ethernet chip supported by this driver, add the USB ID for the same. This patch is based on work by Geoffrey Tran <geoffrey.tran@gmail.com> who has indicated they would like this upstreamed by someone more familiar with the upstreaming process. Signed-off-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
-
Madalin Bucur authored
A previous commit (5567e989) inserted a dependency on DMA API that requires HAS_DMA to be added in Kconfig. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Eric Dumazet authored
Similar to the fix provided by Dominik Heidler in commit 9b3dc0a1 ("l2tp: cast l2tp traffic counter to unsigned") we need to take care of 32bit kernels in dev_get_stats(). When using atomic_long_read(), we add a 'long' to u64 and might misinterpret high order bit, unless we cast to unsigned. Fixes: caf586e5 ("net: add a core netdev->rx_dropped counter") Fixes: 015f0688 ("net: net: add a core netdev->tx_dropped counter") Fixes: 6e7333d3 ("net: add rx_nohandler stat counter") Signed-off-by:
-
- 25 Jun, 2017 3 commits
-
-
WANG Cong authored
We have to reset the sk->sk_rx_dst when we disconnect a TCP connection, because otherwise when we re-connect it this dst reference is simply overridden in tcp_finish_connect(). This fixes a dst leak which leads to a loopback dev refcnt leak. It is a long-standing bug, Kevin reported a very similar (if not same) bug before. Thanks to Andrei for providing such a reliable reproducer which greatly narrows down the problem. Fixes: 41063e9d ("ipv4: Early TCP socket demux.") Reported-by:
Andrei Vagin <avagin@gmail.com> Reported-by:
Kevin Xu <kaiwen.xu@hulu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Wei Wang authored
In __ip6_datagram_connect(), reset sk->sk_v6_daddr and inet->dport if error occurs. In udp_v6_early_demux(), check for sk_state to make sure it is in TCP_ESTABLISHED state. Together, it makes sure unconnected UDP socket won't be considered as a valid candidate for early demux. v3: add TCP_ESTABLISHED state check in udp_v6_early_demux() v2: fix compilation error Fixes: 5425077d ("net: ipv6: Add early demux handler for UDP unicast") Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
-
Mintz, Yuval authored
When mc configuration changes bnx2x_config_mcast() can return 0 for success, negative for failure and positive for benign reason preventing its immediate work, e.g., when the command awaits the completion of a previously sent command. When removing all configured macs on a 578xx adapter, if a positive value would be returned driver would errneously log it as an error. Fixes: c7b7b483 ("bnx2x: Don't flush multicast MACs") Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
- 23 Jun, 2017 7 commits
-
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Error handling and netpoll fixes. Add missing error handling and fix netpoll handling. The current code handles RX and TX events in netpoll mode and is causing lots of warnings and errors in the RX code path in netpoll mode. The fix is to only handle TX events in netpoll mode. ==================== Signed-off-by: -
Michael Chan authored
To handle netpoll properly, the driver must only handle TX packets during NAPI. Handling RX events cause warnings and errors in netpoll mode. The ndo_poll_controller() method should call napi_schedule() directly so that a NAPI weight of zero will be used during netpoll mode. The bnxt_en driver supports 2 ring modes: combined, and separate rx/tx. In separate rx/tx mode, the ndo_poll_controller() method will only process the tx rings. In combined mode, the rx and tx completion entries are mixed in the completion ring and we need to drop the rx entries and recycle the rx buffers. Add a function bnxt_force_rx_discard() to handle this in netpoll mode when we see rx entries in combined ring mode. Reported-by:
Calvin Owens <calvinowens@fb.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
When we get a TPA_END completion to handle a completed LRO packet, it is possible that hardware would indicate errors. The current code is not checking for the error condition. Define the proper error bits and the macro to check for this error and abort properly. Signed-off-by:
-
Richard Cochran authored
The function, skb_complete_tx_timestamp(), used to allow passing in a NULL pointer for the time stamps, but that was changed in commit 62bccb8c ("net-timestamp: Make the clone operation stand-alone from phy timestamping"), and the existing call sites, all of which are in the dp83640 driver, were fixed up. Even though the kernel-doc was subsequently updated in commit 7a76a021 ("net-timestamp: Update skb_complete_tx_timestamp comment"), still a bug fix from Manfred Rudigier came into the driver using the old semantics. Probably Manfred derived that patch from an older kernel version. This fix should be applied to the stable trees as well. Fixes: 81e8f2e9 ("net: dp83640: Fix tx timestamp overflow handling.") Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2017-06-23 1) Fix xfrm garbage collecting when unregistering a netdevice. From Hangbin Liu. 2) Fix NULL pointer derefernce when exiting a network namespace. From Hangbin Liu. 3) Fix some error codes in pfkey to prevent a NULL pointer derefernce. From Dan Carpenter. 4) Fix NULL pointer derefernce on allocation failure in pfkey. From Dan Carpenter. 5) Adjust IPv6 payload_len to include extension headers. Otherwise we corrupt the packets when doing ESP GRO on transport mode. From Yossi Kuperman. 6) Set nhoff to the proper offset of the IPv6 nexthdr when doing ESP GRO. From Yossi Kuperman. Please pull or let me know if there are problems. ==================== Signed-off-by: -
WANG Cong authored
The memory allocation size is controlled by user-space, if it is too large just fail silently and return NULL, not to mention there is a fallback allocation later. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Michal Kubeček authored
Our customer encountered stuck NFS writes for blocks starting at specific offsets w.r.t. page boundary caused by networking stack sending packets via UFO enabled device with wrong checksum. The problem can be reproduced by composing a long UDP datagram from multiple parts using MSG_MORE flag: sendto(sd, buff, 1000, MSG_MORE, ...); sendto(sd, buff, 1000, MSG_MORE, ...); sendto(sd, buff, 3000, 0, ...); Assume this packet is to be routed via a device with MTU 1500 and NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(), this condition is tested (among others) to decide whether to call ip_ufo_append_data(): ((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb)) At the moment, we already have skb with 1028 bytes of data which is not marked for GSO so that the test is false (fragheaderlen is usually 20). Thus we append second 1000 bytes to this skb without invoking UFO. Third sendto(), however, has sufficient length to trigger the UFO path so that we end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb() uses udp_csum() to calculate the checksum but that assumes all fragments have correct checksum in skb->csum which is not true for UFO fragments. When checking against MTU, we need to add skb->len to length of new segment if we already have a partially filled skb and fragheaderlen only if there isn't one. In the IPv6 case, skb can only be null if this is the first segment so that we have to use headersize (length of the first IPv6 header) rather than fragheaderlen (length of IPv6 header of further fragments) for skb == NULL. Fixes: e89e9cf5 ("[IPv4/IPv6]: UFO Scatter-gather approach") Fixes: e4c5e13a ("ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output") Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
- 22 Jun, 2017 14 commits
-
-
Martin Habets authored
The 8000 series adapters uses catch-all filters for encapsulated traffic to support filtering VXLAN, NVGRE and GENEVE traffic. This new filter functionality requires a longer MCDI command. This patch increases the size of buffers on stack that were missed, which fixes a kernel panic from the stack protector. Fixes: 9b410801 ("sfc: insert catch-all filters for encapsulated traffic") Signed-off-by:
Martin Habets <mhabets@solarflare.com> Acked-by:
-
Arnd Bergmann authored
This structure member is hidden behind CONFIG_SYSFS, and we get a build error when that is disabled: drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_channels': drivers/net/hyperv/netvsc_drv.c:754:49: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'? drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_rxfh': drivers/net/hyperv/netvsc_drv.c:1181:25: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'? As the value is only set once to the argument of alloc_netdev_mq(), we can compare against that constant directly. Fixes: ff4a4419 ("netvsc: allow get/set of RSS indirection table") Fixes: 2b01888d ("netvsc: allow more flexible setting of number of channels") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
WANG Cong authored
The per netns loopback_dev->ip6_ptr is unregistered and set to NULL when its mtu is set to smaller than IPV6_MIN_MTU, this leads to that we could set rt->rt6i_idev NULL after a rt6_uncached_list_flush_dev() and then crash after another call. In this case we should just bring its inet6_dev down, rather than unregistering it, at least prior to commit 176c39af ("netns: fix addrconf_ifdown kernel panic") we always override the case for loopback. Thanks a lot to Andrey for finding a reliable reproducer. Fixes: 176c39af ("netns: fix addrconf_ifdown kernel panic") Reported-by:
David Ahern <dsahern@gmail.com> Tested-by:
-
David S. Miller authored
Vladislav Yasevich says: ==================== macvlan: Fix some issues with changing mac addresses There are some issues in macvlan wrt to changing it's mac address. * An error is returned in the specified address is the same as an already assigned address. * In passthru mode, the mac address of the macvlan device doesn't change. * After changing the mac address of a passthru macvlan and then removing it, the mac address of the physical device remains changed. This patch series attempts to resolve these issues. V2: Address a small issue in p4 where we save the address from the lowerdev (from girish.moodalbail@oracle.com) ==================== Signed-off-by: -
Vlad Yasevich authored
Passthru macvlans directly change the mac address of the lower level device. That's OK, but after the macvlan is deleted, the lower device is left with changed address and one needs to reboot to bring back the origina HW addresses. This scenario is actually quite common with passthru macvtap devices. This patch attempts to solve this, by storing the mac address of the lower device in macvlan_port structure and keeping track of it through the changes. After this patch, any changes to the lower device mac address done trough the macvlan device, will be reverted back. Any changs done directly to the lower device mac address will be kept. Signed-off-by:
-
Vlad Yasevich authored
Convert the port passthru boolean into flags with accesor functions. Signed-off-by:
-
Vlad Yasevich authored
When a lower device of the passthru macvlan changes it's address, passthru macvlan is supposed to change it's own address as well. However, that doesn't happen correctly because the check in macvlan_addr_busy() will catch the fact that the lower level (port) mac address is the same as the address we are trying to assign to the macvlan, and return an error. As a reasult, the address of the passthru macvlan device is never changed. The same thing happens when the user attempts to change the mac address of the passthru macvlan. The simple solution appers to be to not check against the lower device in case of passthru macvlan device, since the 2 addresses are _supposed_ to be the same. Signed-off-by:
-
Vlad Yasevich authored
The user currently gets an EBUSY error when attempting to set the mac address on a macvlan device to the same value. This should really be a no-op as nothing changes. Catch the condition and return early. Signed-off-by:
-
Wei Liu authored
Add a flag to indicate if a queue is rate-limited. Test the flag in NAPI poll handler and avoid rescheduling the queue if true, otherwise we risk locking up the host. The rescheduling will be done in the timer callback function. Reported-by:
Jean-Louis Dupond <jean-louis@dupond.be> Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Tested-by:
Paul Durrant <paul.durrant@citrix.com> Signed-off-by:
-
Serhey Popovych authored
There are number of problems with configuration peer network device in absence of IFLA_VETH_PEER attributes where attributes for main network device shared with peer. First it is not feasible to configure both network devices with same MAC address since this makes communication in such configuration problematic. This case can be reproduced with following sequence: # ip link add address 02:11:22:33:44:55 type veth # ip li sh ... 26: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \ noop state DOWN mode DEFAULT qlen 1000 link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff 27: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \ noop state DOWN mode DEFAULT qlen 1000 link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff Second it is not possible to register both main and peer network devices with same name, that happens when name for main interface is given with IFLA_IFNAME and same attribute reused for peer. This case can be reproduced with following sequence: # ip link add dev veth1a type veth RTNETLINK answers: File exists To fix both of the cases check if corresponding netlink attributes are taken from peer_tb when valid or name based on rtnl ops kind and random address is used. Signed-off-by:Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by:
-
Lokesh Vutla authored
cpsw driver tries to get macid for am43xx SoCs using the compatible ti,am4372. But not all variants of am43x uses this complatible like epos evm uses ti,am438x. So use a generic compatible ti,am43 to get macid for all am43 based platforms. Reviewed-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
-
WANG Cong authored
In commit 242d3a49 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf") I assumed NETDEV_REGISTER and NETDEV_UNREGISTER are paired, unfortunately, as reported by jeffy, netdev_wait_allrefs() could rebroadcast NETDEV_UNREGISTER event until all refs are gone. We have to add an additional check to avoid this corner case. For netdev_wait_allrefs() dev->reg_state is NETREG_UNREGISTERED, for dev_change_net_namespace(), dev->reg_state is NETREG_REGISTERED. So check for dev->reg_state != NETREG_UNREGISTERED. Fixes: 242d3a49 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf") Reported-by:
jeffy <jeffy.chen@rock-chips.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
-
Zach Brown authored
The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes an autoneg failure case by resetting the hardware. This turns off intterupts. Things will work themselves out if the phy polls, as it will figure out it's state during a poll. However if the phy uses only intterupts, the phy will stall, since interrupts are off. This patch fixes the issue by calling config_intr after resetting the phy. Fixes: d2fd719b ("net/phy: micrel: Add workaround for bad autoneg ") Signed-off-by:Zach Brown <zach.brown@ni.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Yossi Kuperman authored
IP6CB(skb)->nhoff is the offset of the nexthdr field in an IPv6 header, unless there are extension headers present, in which case nhoff points to the nexthdr field of the last extension header. In non-GRO code path, nhoff is set by ipv6_rcv before any XFRM code is executed. Conversely, in GRO code path (when esp6_offload is loaded), nhoff is not set. The following functions fail to read the correct value and eventually the packet is dropped: xfrm6_transport_finish xfrm6_tunnel_input xfrm6_rcv_tnl Set nhoff to the proper offset of nexthdr in esp6_gro_receive. Fixes: 7785bba2 ("esp: Add a software GRO codepath") Signed-off-by:Yossi Kuperman <yossiku@mellanox.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
