- 26 Mar, 2021 5 commits
-
-
Marcel Holtmann authored
Increment the mgmt revision due to recent changes. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Marcel Holtmann authored
The list of trusted events should contain the advertisement monitor events and not the untrusted one, so move entries to the correct list. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Marcel Holtmann authored
The list of supported mgmt commands for PHY configuration is missing, so just add them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Marcel Holtmann authored
The read advertising features error handling returns false the opcode for the set advertising command. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Marcel Holtmann authored
The return error when trying to change the setting when a controller is powered up, shall be MGMT_STATUS_REJECTED. However instead now the error MGMT_STATUS_NOT_POWERED is used which is exactly the opposite. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
- 25 Mar, 2021 10 commits
-
-
Bhaskar Chowdhury authored
s/minium/minimum/ s/procdure/procedure/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Lokendra Singh authored
This skips parsing the firmware version information from the firmware file while controller is in bootloader mode. As in bootloader mode, we are supposed to patch unconditionally. Signed-off-by: Lokendra Singh <lokendra.singh@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Lokendra Singh authored
In Operational firmware mode, 'Minimum FW version' TLV ID is not available. So, we cannot fetch already running firmware info for comparison against another build. However, It can be collected using a combination of other TLV ID's information. Signed-off-by: Lokendra Singh <lokendra.singh@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Lokendra Singh authored
This moves limited_cce and sbe_type checks under bootloader during tlv parsing as operational firmware don't have access to these values. Any attempt to read such values in operational firmware will only fetch garbage data. Signed-off-by: Lokendra Singh <lokendra.singh@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Luiz Augusto von Dentz authored
This moves duplicated code for waiting firmware download completion to a function that can be reused. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Luiz Augusto von Dentz authored
This moves duplicated code for waiting firmware download completion to a function that can be reused. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Luiz Augusto von Dentz authored
This moves version checks of intel_version() to btintel_version_info(). Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Luiz Augusto von Dentz authored
This moves version checks of intel_version_tlv() to btintel_version_info_tlv(). Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Luiz Augusto von Dentz authored
In order to allow new firmware to load, it first needs to check if the firmware version on file matches the one loaded if it doesn't, then it needs to revert to bootloader mode in order to load the new firmware. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Luiz Augusto von Dentz authored
This checks the firmware build number, week and year against the repective loaded version. If details are a match, skip the download process. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 24 Mar, 2021 1 commit
-
-
Meng Yu authored
Macros should not use a trailing semicolon. Signed-off-by: Meng Yu <yumeng18@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 23 Mar, 2021 2 commits
-
-
Meng Yu authored
remove trailing semicolon in macros and coding style fix. Signed-off-by: Meng Yu <yumeng18@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Archie Pusaka authored
There is a possibility of receiving a zapped sock on l2cap_sock_connect(). This could lead to interesting crashes, one such case is tearing down an already tore l2cap_sock as is happened with this call trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0xc4/0x118 lib/dump_stack.c:56 register_lock_class kernel/locking/lockdep.c:792 [inline] register_lock_class+0x239/0x6f6 kernel/locking/lockdep.c:742 __lock_acquire+0x209/0x1e27 kernel/locking/lockdep.c:3105 lock_acquire+0x29c/0x2fb kernel/locking/lockdep.c:3599 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:137 [inline] _raw_spin_lock_bh+0x38/0x47 kernel/locking/spinlock.c:175 spin_lock_bh include/linux/spinlock.h:307 [inline] lock_sock_nested+0x44/0xfa net/core/sock.c:2518 l2cap_sock_teardown_cb+0x88/0x2fb net/bluetooth/l2cap_sock.c:1345 l2cap_chan_del+0xa3/0x383 net/bluetooth/l2cap_core.c:598 l2cap_chan_close+0x537/0x5dd net/bluetooth/l2cap_core.c:756 l2cap_chan_timeout+0x104/0x17e net/bluetooth/l2cap_core.c:429 process_one_work+0x7e3/0xcb0 kernel/workqueue.c:2064 worker_thread+0x5a5/0x773 kernel/workqueue.c:2196 kthread+0x291/0x2a6 kernel/kthread.c:211 ret_from_fork+0x4e/0x80 arch/x86/entry/entry_64.S:604 Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reported-by: syzbot+abfc0f5e668d4099af73@syzkaller.appspotmail.com Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 22 Mar, 2021 5 commits
-
-
Arnd Bergmann authored
gcc-11 points out that the declaration does not match the definition: net/bluetooth/ecdh_helper.c:122:55: error: argument 2 of type ‘const u8[32]’ {aka ‘const unsigned char[32]’} with mismatched bound [-Werror=array-parameter=] 122 | int set_ecdh_privkey(struct crypto_kpp *tfm, const u8 private_key[32]) | ~~~~~~~~~^~~~~~~~~~~~~~~ In file included from net/bluetooth/ecdh_helper.c:23: net/bluetooth/ecdh_helper.h:28:56: note: previously declared as ‘const u8 *’ {aka ‘const unsigned char *’} 28 | int set_ecdh_privkey(struct crypto_kpp *tfm, const u8 *private_key); | ~~~~~~~~~~^~~~~~~~~~~ Change the declaration to contain the size of the array, rather than just a pointer. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Tetsuo Handa authored
syzbot is hitting "INFO: trying to register non-static key." message [1], for "struct l2cap_chan"->tx_q.lock spinlock is not yet initialized when l2cap_chan_del() is called due to e.g. timeout. Since "struct l2cap_chan"->lock mutex is initialized at l2cap_chan_create() immediately after "struct l2cap_chan" is allocated using kzalloc(), let's as well initialize "struct l2cap_chan"->{tx_q,srej_q}.lock spinlocks there. [1] https://syzkaller.appspot.com/bug?extid=fadfba6a911f6bf71842Reported-and-tested-by: syzbot <syzbot+fadfba6a911f6bf71842@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Bhaskar Chowdhury authored
s/packat/packet/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Archie Pusaka authored
hci_chan can be created in 2 places: hci_loglink_complete_evt() if it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory, Only AMP hci_chan should be removed by a call to hci_disconn_loglink_complete_evt(). However, the controller might mess up, call that function, and destroy an hci_chan which is not initiated by hci_loglink_complete_evt(). This patch adds a verification that the destroyed hci_chan must have been init'd by hci_loglink_complete_evt(). Example crash call trace: Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe3/0x144 lib/dump_stack.c:118 print_address_description+0x67/0x22a mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report mm/kasan/report.c:412 [inline] kasan_report+0x251/0x28f mm/kasan/report.c:396 hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072 l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877 l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661 l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline] l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline] l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline] l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023 l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596 hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline] hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 Allocated by task 38: set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553 kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787 kmalloc include/linux/slab.h:515 [inline] kzalloc include/linux/slab.h:709 [inline] hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674 l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062 l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline] l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381 hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404 hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline] hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 Freed by task 1732: set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free mm/kasan/kasan.c:521 [inline] __kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436 slab_free mm/slub.c:3009 [inline] kfree+0x182/0x21e mm/slub.c:3972 hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline] hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 The buggy address belongs to the object at ffff8881d7af9180 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 24 bytes inside of 128-byte region [ffff8881d7af9180, ffff8881d7af9200) The buggy address belongs to the page: page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0 flags: 0x8000000000000200(slab) raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200 raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reported-by: syzbot+98228e7407314d2d4ba2@syzkaller.appspotmail.com Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Archie Pusaka authored
Currently l2cap_chan_set_defaults() reset chan->conf_state to zero. However, there is a flag CONF_NOT_COMPLETE which is set when creating the l2cap_chan. It is suggested that the flag should be cleared when l2cap_chan is ready, but when l2cap_chan_set_defaults() is called, l2cap_chan is not yet ready. Therefore, we must set this flag as the default. Example crash call trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0xc4/0x118 lib/dump_stack.c:56 panic+0x1c6/0x38b kernel/panic.c:117 __warn+0x170/0x1b9 kernel/panic.c:471 warn_slowpath_fmt+0xc7/0xf8 kernel/panic.c:494 debug_print_object+0x175/0x193 lib/debugobjects.c:260 debug_object_assert_init+0x171/0x1bf lib/debugobjects.c:614 debug_timer_assert_init kernel/time/timer.c:629 [inline] debug_assert_init kernel/time/timer.c:677 [inline] del_timer+0x7c/0x179 kernel/time/timer.c:1034 try_to_grab_pending+0x81/0x2e5 kernel/workqueue.c:1230 cancel_delayed_work+0x7c/0x1c4 kernel/workqueue.c:2929 l2cap_clear_timer+0x1e/0x41 include/net/bluetooth/l2cap.h:834 l2cap_chan_del+0x2d8/0x37e net/bluetooth/l2cap_core.c:640 l2cap_chan_close+0x532/0x5d8 net/bluetooth/l2cap_core.c:756 l2cap_sock_shutdown+0x806/0x969 net/bluetooth/l2cap_sock.c:1174 l2cap_sock_release+0x64/0x14d net/bluetooth/l2cap_sock.c:1217 __sock_release+0xda/0x217 net/socket.c:580 sock_close+0x1b/0x1f net/socket.c:1039 __fput+0x322/0x55c fs/file_table.c:208 ____fput+0x17/0x19 fs/file_table.c:244 task_work_run+0x19b/0x1d3 kernel/task_work.c:115 exit_task_work include/linux/task_work.h:21 [inline] do_exit+0xe4c/0x204a kernel/exit.c:766 do_group_exit+0x291/0x291 kernel/exit.c:891 get_signal+0x749/0x1093 kernel/signal.c:2396 do_signal+0xa5/0xcdb arch/x86/kernel/signal.c:737 exit_to_usermode_loop arch/x86/entry/common.c:243 [inline] prepare_exit_to_usermode+0xed/0x235 arch/x86/entry/common.c:277 syscall_return_slowpath+0x3a7/0x3b3 arch/x86/entry/common.c:348 int_ret_from_sys_call+0x25/0xa3 Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reported-by: syzbot+338f014a98367a08a114@syzkaller.appspotmail.com Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 18 Mar, 2021 2 commits
-
-
Linus Walleij authored
Add the missing brcm,bcm4330-bt and brcm,bcm4334-bt to the match table so device trees can use this compatible as well and not need to use the fallback brcm,bcm4329-bt. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Linus Walleij authored
BCM4334 was missing from the binding. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 17 Mar, 2021 1 commit
-
-
Ayush Garg authored
Skip updation of tx and rx PHYs values, when PHY Update event's status is not successful. Signed-off-by: Ayush Garg <ayush.garg@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 16 Mar, 2021 1 commit
-
-
Jiri Kosina authored
Commit eab2404b ("Bluetooth: Add BT_PHY socket option") added a dependency between socket lock and hci_dev->lock that could lead to deadlock. It turns out that hci_conn_get_phy() is not in any way relying on hdev being immutable during the runtime of this function, neither does it even look at any of the members of hdev, and as such there is no need to hold that lock. This fixes the lockdep splat below: ====================================================== WARNING: possible circular locking dependency detected 5.12.0-rc1-00026-g73d464503354 #10 Not tainted ------------------------------------------------------ bluetoothd/1118 is trying to acquire lock: ffff8f078383c078 (&hdev->lock){+.+.}-{3:3}, at: hci_conn_get_phy+0x1c/0x150 [bluetooth] but task is already holding lock: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}: lock_sock_nested+0x72/0xa0 l2cap_sock_ready_cb+0x18/0x70 [bluetooth] l2cap_config_rsp+0x27a/0x520 [bluetooth] l2cap_sig_channel+0x658/0x1330 [bluetooth] l2cap_recv_frame+0x1ba/0x310 [bluetooth] hci_rx_work+0x1cc/0x640 [bluetooth] process_one_work+0x244/0x5f0 worker_thread+0x3c/0x380 kthread+0x13e/0x160 ret_from_fork+0x22/0x30 -> #2 (&chan->lock#2/1){+.+.}-{3:3}: __mutex_lock+0xa3/0xa10 l2cap_chan_connect+0x33a/0x940 [bluetooth] l2cap_sock_connect+0x141/0x2a0 [bluetooth] __sys_connect+0x9b/0xc0 __x64_sys_connect+0x16/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&conn->chan_lock){+.+.}-{3:3}: __mutex_lock+0xa3/0xa10 l2cap_chan_connect+0x322/0x940 [bluetooth] l2cap_sock_connect+0x141/0x2a0 [bluetooth] __sys_connect+0x9b/0xc0 __x64_sys_connect+0x16/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&hdev->lock){+.+.}-{3:3}: __lock_acquire+0x147a/0x1a50 lock_acquire+0x277/0x3d0 __mutex_lock+0xa3/0xa10 hci_conn_get_phy+0x1c/0x150 [bluetooth] l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth] __sys_getsockopt+0xcc/0x200 __x64_sys_getsockopt+0x20/0x30 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &hdev->lock --> &chan->lock#2/1 --> sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock(&chan->lock#2/1); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock(&hdev->lock); *** DEADLOCK *** 1 lock held by bluetoothd/1118: #0: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 [bluetooth] stack backtrace: CPU: 3 PID: 1118 Comm: bluetoothd Not tainted 5.12.0-rc1-00026-g73d464503354 #10 Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017 Call Trace: dump_stack+0x7f/0xa1 check_noncircular+0x105/0x120 ? __lock_acquire+0x147a/0x1a50 __lock_acquire+0x147a/0x1a50 lock_acquire+0x277/0x3d0 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] ? __lock_acquire+0x2e1/0x1a50 ? lock_is_held_type+0xb4/0x120 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] __mutex_lock+0xa3/0xa10 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] ? lock_acquire+0x277/0x3d0 ? mark_held_locks+0x49/0x70 ? mark_held_locks+0x49/0x70 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] hci_conn_get_phy+0x1c/0x150 [bluetooth] l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth] __sys_getsockopt+0xcc/0x200 __x64_sys_getsockopt+0x20/0x30 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fb73df33eee Code: 48 8b 0d 85 0f 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 52 0f 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007fffcfbbbf08 EFLAGS: 00000203 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 0000000000000019 RCX: 00007fb73df33eee RDX: 000000000000000e RSI: 0000000000000112 RDI: 0000000000000018 RBP: 0000000000000000 R08: 00007fffcfbbbf44 R09: 0000000000000000 R10: 00007fffcfbbbf3c R11: 0000000000000203 R12: 0000000000000000 R13: 0000000000000018 R14: 0000000000000000 R15: 0000556fcefc70d0 Fixes: eab2404b ("Bluetooth: Add BT_PHY socket option") Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 15 Mar, 2021 3 commits
-
-
Luiz Augusto von Dentz authored
This converts instances of BT_ERR and BT_DBG to bt_dev_err and bt_dev_dbg which can be enabled at runtime when BT_FEATURE_DEBUG is enabled. Note: Not all instances could be converted as some are exercised by selftest. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Luiz Augusto von Dentz authored
When receiving L2CAP_CREDIT_BASED_CONNECTION_REQ the remote may request more channels than allowed by the spec (10 octecs = 5 CIDs) so this checks if the number of channels is bigger than the maximum allowed and respond with an error. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Sonny Sasaka authored
Not cancelling it has caused a bug where passive background scanning is disabled out of the blue, preventing BLE keyboards/mice to reconnect. Here is how it happens: After hci_req_stop_discovery, there is still le_scan_restart_work scheduled. Invocation of le_scan_restart_work causes a harmful le_scan_disable_work to be scheduled. This le_scan_disable_work will eventually disable passive scanning when the timer fires. Sample btmon trace: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 Type: Passive (0x00) Interval: 367.500 msec (0x024c) Window: 37.500 msec (0x003c) Own address type: Public (0x00) Filter policy: Accept all advertisement (0x00) > HCI Event: Command Complete (0x0e) plen 4 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 Scanning: Enabled (0x01) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 LE Set Scan Enable (0x08|0x000c) ncmd 2 Status: Success (0x00) ... < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 LE Set Scan Enable (0x08|0x000c) ncmd 2 Status: Success (0x00) // Background scanning is not working here onwards. Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 11 Mar, 2021 2 commits
-
-
Venkata Lakshmi Narayana Gubba authored
Based on device may wakeup status, Bluez stack will enable/disable passive scanning with whitelist in BT controller while suspending. As interrupt from BT SoC is handled by UART driver,we need to use device handle of UART driver to get the status of device may wakeup Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Luiz Augusto von Dentz authored
This fails the pairing procedure when both remote and local non-debug public keys are identical. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 08 Mar, 2021 4 commits
-
-
Kiran K authored
Boot address parameter was not getting updated properly due to wrong offset Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Kiran K authored
print the firmware file name on error loading from fie system Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Linus Walleij authored
Obtain and drive the optional reset GPIO line if this is not hardwired in the platform. This is needed on the Samsung GT-I9070 mobile phone. The invers of power is used, this should be OK to apply simultaneously as the power signal according to figures 47-51 on pages 159-161 in the BCM4330 datasheet. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Linus Walleij authored
This rewrites the Broadcom bluetooth bindings in YAML and adds a GPIO handle for the BT_RST_N line as used on some platforms. The Ingenic UART binding was using this binding in its example DTS fragment, however mistakenly using "vcc-supply" for what is called "vbat-supply". The proper DTS files and the code in the kernel all use "vbat-supply" so fix up the example in this patch so we ge a clean check. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 03 Mar, 2021 2 commits
-
-
Daniel Winkler authored
An issue was found, where if a bluetooth client requests a broadcast advertisement with scan response data, it will not be properly registered with the controller. This is because at the time that the hci_cp_le_set_scan_param structure is created, the scan response will not yet have been received since it comes in a second MGMT call. With empty scan response, the request defaults to a non-scannable PDU type. On some controllers, the subsequent scan response request will fail due to incorrect PDU type, and others will succeed and not use the scan response. This fix allows the advertising parameters MGMT call to include a flag to let the kernel know whether a scan response will be coming, so that the correct PDU type is used in the first place. A bluetoothd change is also incoming to take advantage of it. To test this, I created a broadcast advertisement with scan response data and registered it on the hatch chromebook. Without this change, the request fails, and with it will succeed. Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Abhishek Pandit-Subedi authored
During suspend, there are a few scan enable and set event filter commands that don't need to be sent unless there are actual BR/EDR devices capable of waking the system. Check the HCI_PSCAN bit before writing scan enable and use a new dev flag, HCI_EVENT_FILTER_CONFIGURED to control whether to clear the event filter. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 02 Mar, 2021 1 commit
-
-
Abhishek Pandit-Subedi authored
When suspending, Bluetooth disconnects all connected peers devices. If an LE connection is started but isn't completed, we will see an LE Create Connection Cancel instead of an HCI disconnect. This just adds a check to see if an LE cancel was the last disconnected device and wake the suspend thread when that is the case. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 26 Feb, 2021 1 commit
-
-
mark-yw.chen authored
Warnings: drivers/bluetooth/btusb.c:3775 btusb_mtk_setup() error: uninitialized symbol 'fw_version'. -> add initial value for fw_version. Warnings: sparse: sparse: incorrect type in assignment (different base types) -> add le32_to_cpu to fix incorrect type in assignment. Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-