- 20 Jun, 2024 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, bpf and netfilter. Happy summer solstice! The line count is a bit inflated by a selftest and update to a driver's FW interface header, in reality this is slightly below average for us. We are expecting one driver fix from Intel, but there are no big known issues. Current release - regressions: - ipv6: bring NLM_DONE out to a separate recv() again Current release - new code bugs: - wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API Previous releases - regressions: - wifi: mac80211: fix monitor channel setting with chanctx emulation (probably most awaited of the fixes in this PR, tracked by Thorsten) - usb: ax88179_178a: bring back reset on init, if PHY is disconnected - bpf: fix UML x86_64 compile failure with BPF - bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit with malicious BPF - eth: mvpp2: use slab_build_skb() for packets in slab, driver was missed during API refactoring - wifi: iwlwifi: add missing unlock of mvm mutex Previous releases - always broken: - ipv6: add a number of missing null-checks for in6_dev_get(), in case IPv6 disabling races with the datapath - bpf: fix reg_set_min_max corruption of fake_reg - sched: act_ct: add netns as part of the key of tcf_ct_flow_table" * tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits) net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings selftests: virtio_net: add forgotten config options bnxt_en: Restore PTP tx_avail count in case of skb_pad() error bnxt_en: Set TSO max segs on devices with limits bnxt_en: Update firmware interface to 1.10.3.44 net: stmmac: Assign configured channel value to EXTTS event net: do not leave a dangling sk pointer, when socket creation fails net/tcp_ao: Don't leak ao_info on error-path ice: Fix VSI list rule with ICE_SW_LKUP_LAST type ipv6: bring NLM_DONE out to a separate recv() again selftests: add selftest for the SRv6 End.DX6 behavior with netfilter selftests: add selftest for the SRv6 End.DX4 behavior with netfilter netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors netfilter: ipset: Fix suspicious rcu_dereference_protected() selftests: openvswitch: Set value to nla flags. octeontx2-pf: Fix linking objects into multiple modules octeontx2-pf: Add error handling to VLAN unoffload handling virtio_net: fixing XDP for fully checksummed packets handling virtio_net: checksum offloading handling fix ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Lots of small HD-audio quirks and fixes (mostly Realtek codec and Cirrus stuff). Also a small MIDI 2.0 fix and a fix for missing module description are included" * tag 'sound-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda: cs35l56: Select SERIAL_MULTI_INSTANTIATE ALSA: hda/realtek: Add more codec ID to no shutup pins list sound/oss/dmasound: add missing MODULE_DESCRIPTION() macro ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14ARP8 ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM ALSA: hda: tas2781: Component should be unbound before deconstruction ALSA: hda: cs35l41: Component should be unbound before deconstruction ALSA: hda: cs35l56: Component should be unbound before deconstruction ALSA/hda: intel-dsp-config: Document AVS as dsp_driver option ALSA: hda/realtek: Support Lenovo Thinkbook 13x Gen 4 ALSA: hda/realtek: Support Lenovo Thinkbook 16P Gen 5 ALSA: hda: cs35l41: Support Lenovo Thinkbook 13x Gen 4 ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P Gen 5 ALSA: hda/realtek: Remove Framework Laptop 16 from quirks ALSA: hda/realtek: Limit mic boost on N14AP7 ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 445/465 G11. ALSA: seq: ump: Fix missing System Reset message handling ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind() ALSA: hda: cs35l56: Fix lifecycle of codec pointer
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull mfd fix from Lee Jones: - Fix AXP717 PMIC probe and by extension its consumers * tag 'mfd-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: axp20x: AXP717: Fix missing IRQ status registers range
-
Oliver Neukum authored
This functions retrieves values by passing a pointer. As the function that retrieves them can fail before touching the pointers, the variables must be initialized. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+5186630949e3c55f0799@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20240619132816.11526-1-oneukum@suse.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jiri Pirko authored
One may use tools/testing/selftests/drivers/net/virtio_net/config for example for vng build command like this one: $ vng -v -b -f tools/testing/selftests/drivers/net/virtio_net/config In that case, the needed kernel config options are not turned on. Add the missed kernel config options. Reported-by:
Matthieu Baerts <matttbe@kernel.org> Closes: https://lore.kernel.org/netdev/1a63f209-b1d4-4809-bc30-295a5cafa296@kernel.org/ Fixes: ccfaed04 ("selftests: virtio_net: add initial tests") Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240619061748.1869404-1-jiri@resnulli.usSigned-off-by:
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Bug fixes for net The first firmware interface update is needed by the second patch to limit the number of TSO segments on the 5760X chips. The third patch fixes the TX error path for PTP packets. ==================== Link: https://lore.kernel.org/r/20240618215313.29631-1-michael.chan@broadcom.comSigned-off-by:
-
Pavan Chebbi authored
The current code only restores PTP tx_avail count when we get DMA mapping errors. Fix it so that the PTP tx_avail count will be restored for both DMA mapping errors and skb_pad() errors. Otherwise PTP TX timestamp will not be available after a PTP packet hits the skb_pad() error. Fixes: 83bb623c ("bnxt_en: Transmit and retrieve packet timestamps") Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240618215313.29631-4-michael.chan@broadcom.comSigned-off-by:
-
Michael Chan authored
Firmware will now advertise a non-zero TSO max segments if the device has a limit. 0 means no limit. The latest 5760X chip (early revs) has a limit of 2047 that cannot be exceeded. If exceeded, the chip will send out just a small number of segments. Call netif_set_tso_max_segs() if the device has a limit. Fixes: 2012a6ab ("bnxt_en: Add 5760X (P7) PCI IDs") Reviewed-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Michael Chan authored
The relevant change is the max_tso_segs value returned by firmware in the HWRM_FUNC_QCAPS response. This value will be used in the next patch to cap the TSO segments. Signed-off-by:
-
Oleksij Rempel authored
Assign the configured channel value to the EXTTS event in the timestamp interrupt handler. Without assigning the correct channel, applications like ts2phc will refuse to accept the event, resulting in errors such as: ... ts2phc[656.834]: config item end1.ts2phc.pin_index is 0 ts2phc[656.834]: config item end1.ts2phc.channel is 3 ts2phc[656.834]: config item end1.ts2phc.extts_polarity is 2 ts2phc[656.834]: config item end1.ts2phc.extts_correction is 0 ... ts2phc[656.862]: extts on unexpected channel ts2phc[658.141]: extts on unexpected channel ts2phc[659.140]: extts on unexpected channel Fixes: f4da5652 ("net: stmmac: Add support for external trigger timestamping") Cc: stable@vger.kernel.org Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Link: https://lore.kernel.org/r/20240618073821.619751-1-o.rempel@pengutronix.deSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes the suspicious RCU usage warning that resulted from the recent fix for the race between namespace cleanup and gc in ipset left out checking the pernet exit phase when calling rcu_dereference_protected(), from Jozsef Kadlecsik. Patch #2 fixes incorrect input and output netdevice in SRv6 prerouting hooks, from Jianguo Wu. Patch #3 moves nf_hooks_lwtunnel sysctl toggle to the netfilter core. The connection tracking system is loaded on-demand, this ensures availability of this knob regardless. Patch #4-#5 adds selftests for SRv6 netfilter hooks also from Jianguo Wu. netfilter pull request 24-06-19 * tag 'nf-24-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: add selftest for the SRv6 End.DX6 behavior with netfilter selftests: add selftest for the SRv6 End.DX4 behavior with netfilter netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors netfilter: ipset: Fix suspicious rcu_dereference_protected() ==================== Link: https://lore.kernel.org/r/20240619170537.2846-1-pablo@netfilter.orgSigned-off-by:
-
Ignat Korchagin authored
It is possible to trigger a use-after-free by: * attaching an fentry probe to __sock_release() and the probe calling the bpf_get_socket_cookie() helper * running traceroute -I 1.1.1.1 on a freshly booted VM A KASAN enabled kernel will log something like below (decoded and stripped): ================================================================== BUG: KASAN: slab-use-after-free in __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) Read of size 8 at addr ffff888007110dd8 by task traceroute/299 CPU: 2 PID: 299 Comm: traceroute Tainted: G E 6.10.0-rc2+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1)) print_report (mm/kasan/report.c:378 mm/kasan/report.c:488) ? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) kasan_report (mm/kasan/report.c:603) ? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) kasan_check_range (mm/kasan/generic.c:183 mm/kasan/generic.c:189) __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) bpf_get_socket_ptr_cookie (./arch/x86/include/asm/preempt.h:94 ./include/linux/sock_diag.h:42 net/core/filter.c:5094 net/core/filter.c:5092) bpf_prog_875642cf11f1d139___sock_release+0x6e/0x8e bpf_trampoline_6442506592+0x47/0xaf __sock_release (net/socket.c:652) __sock_create (net/socket.c:1601) ... Allocated by task 299 on cpu 2 at 78.328492s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) __kasan_slab_alloc (mm/kasan/common.c:312 mm/kasan/common.c:338) kmem_cache_alloc_noprof (mm/slub.c:3941 mm/slub.c:4000 mm/slub.c:4007) sk_prot_alloc (net/core/sock.c:2075) sk_alloc (net/core/sock.c:2134) inet_create (net/ipv4/af_inet.c:327 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1572) __sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706) __x64_sys_socket (net/socket.c:1718) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 299 on cpu 2 at 78.328502s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) kasan_save_free_info (mm/kasan/generic.c:582) poison_slab_object (mm/kasan/common.c:242) __kasan_slab_free (mm/kasan/common.c:256) kmem_cache_free (mm/slub.c:4437 mm/slub.c:4511) __sk_destruct (net/core/sock.c:2117 net/core/sock.c:2208) inet_create (net/ipv4/af_inet.c:397 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1572) __sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706) __x64_sys_socket (net/socket.c:1718) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fix this by clearing the struct socket reference in sk_common_release() to cover all protocol families create functions, which may already attached the reference to the sk object with sock_init_data(). Fixes: c5dbb89f ("bpf: Expose bpf_get_socket_cookie to tracing programs") Suggested-by:Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
Ignat Korchagin <ignat@cloudflare.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/netdev/20240613194047.36478-1-kuniyu@amazon.com/T/Reviewed-by:
D. Wythe <alibuda@linux.alibaba.com> Link: https://lore.kernel.org/r/20240617210205.67311-1-ignat@cloudflare.comSigned-off-by:
-
Simon Trimmer authored
The ACPI IDs used in the CS35L56 HDA drivers are all handled by the serial multi-instantiate driver which starts multiple Linux device instances from a single ACPI Device() node. As serial multi-instantiate is not an optional part of the system add it as a dependency in Kconfig so that it is not overlooked. Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Link: https://lore.kernel.org/20240619161602.117452-1-simont@opensource.cirrus.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Dmitry Safonov authored
It seems I introduced it together with TCP_AO_CMDF_AO_REQUIRED, on version 5 [1] of TCP-AO patches. Quite frustrative that having all these selftests that I've written, running kmemtest & kcov was always in todo. [1]: https://lore.kernel.org/netdev/20230215183335.800122-5-dima@arista.com/Reported-by:
Dmitry Safonov <0x7f454c46@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240619-tcp-ao-required-leak-v1-1-6408f3c94247@gmail.comSigned-off-by:
-
Marcin Szycik authored
Adding/updating VSI list rule, as well as allocating/freeing VSI list resource are called several times with type ICE_SW_LKUP_LAST, which fails because ice_update_vsi_list_rule() and ice_aq_alloc_free_vsi_list() consider it invalid. Allow calling these functions with ICE_SW_LKUP_LAST. This fixes at least one issue in switchdev mode, where the same rule with different action cannot be added, e.g.: tc filter add dev $PF1 ingress protocol arp prio 0 flower skip_sw \ dst_mac ff:ff:ff:ff:ff:ff action mirred egress redirect dev $VF1_PR tc filter add dev $PF1 ingress protocol arp prio 0 flower skip_sw \ dst_mac ff:ff:ff:ff:ff:ff action mirred egress redirect dev $VF2_PR Fixes: 0f94570d ("ice: allow adding advanced rules") Suggested-by:Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240618210206.981885-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Commit under Fixes optimized the number of recv() calls needed during RTM_GETROUTE dumps, but we got multiple reports of applications hanging on recv() calls. Applications expect that a route dump will be terminated with a recv() reading an individual NLM_DONE message. Coalescing NLM_DONE is perfectly legal in netlink, but even tho reporters fixed the code in respective projects, chances are it will take time for those applications to get updated. So revert to old behavior (for now)? This is an IPv6 version of commit 460b0d33 ("inet: bring NLM_DONE out to a separate recv() again"). Reported-by:
Maciej Żenczykowski <zenczykowski@gmail.com> Link: https://lore.kernel.org/all/CANP3RGc1RG71oPEBXNx_WZFP9AyphJefdO4paczN92n__ds4ow@mail.gmail.comReported-by:
Stefano Brivio <sbrivio@redhat.com> Link: https://lore.kernel.org/all/20240315124808.033ff58d@elisabethReported-by:
Ilya Maximets <i.maximets@ovn.org> Link: https://lore.kernel.org/all/02b50aae-f0e9-47a4-8365-a977a85975d3@ovn.org Fixes: 5fc68320 ("ipv6: remove RTNL protection from inet6_dump_fib()") Tested-by:
-
- 19 Jun, 2024 17 commits
-
-
Linus Torvalds authored
Merge tag 'probes-fixes-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fix from Masami Hiramatsu: - Restrict gen-API tests for synthetic and kprobe events to only be built as modules, as they generate dynamic events that cannot be removed, causing ftracetest and startup selftests to fail * tag 'probes-fixes-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Build event generation tests only as modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - fix for BCM6538 boards - fix RB532 PCI workaround * tag 'mips-fixes_6.10_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: Revert "MIPS: pci: lantiq: restore reset gpio polarity" mips: bmips: BCM6358: make sure CBR is correctly set MIPS: pci: lantiq: restore reset gpio polarity MIPS: Routerboard 532: Fix vendor retry check code
-
Jianguo Wu authored
this selftest is designed for evaluating the SRv6 End.DX6 behavior used with netfilter(rpfilter), in this example, for implementing IPv6 L3 VPN use cases. Signed-off-by:
Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Jianguo Wu authored
this selftest is designed for evaluating the SRv6 End.DX4 behavior used with netfilter(rpfilter), in this example, for implementing IPv4 L3 VPN use cases. Signed-off-by:
-
Jianguo Wu authored
Currently, the sysctl net.netfilter.nf_hooks_lwtunnel depends on the nf_conntrack module, but the nf_conntrack module is not always loaded. Therefore, accessing net.netfilter.nf_hooks_lwtunnel may have an error. Move sysctl nf_hooks_lwtunnel into the netfilter core. Fixes: 7a3f5b0d ("netfilter: add netfilter hooks to SRv6 data plane") Suggested-by:
-
Jianguo Wu authored
input_action_end_dx4() and input_action_end_dx6() are called NF_HOOK() for PREROUTING hook, in PREROUTING hook, we should passing a valid indev, and a NULL outdev to NF_HOOK(), otherwise may trigger a NULL pointer dereference, as below: [74830.647293] BUG: kernel NULL pointer dereference, address: 0000000000000090 [74830.655633] #PF: supervisor read access in kernel mode [74830.657888] #PF: error_code(0x0000) - not-present page [74830.659500] PGD 0 P4D 0 [74830.660450] Oops: 0000 [#1] PREEMPT SMP PTI ... [74830.664953] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [74830.666569] RIP: 0010:rpfilter_mt+0x44/0x15e [ipt_rpfilter] ... [74830.689725] Call Trace: [74830.690402] <IRQ> [74830.690953] ? show_trace_log_lvl+0x1c4/0x2df [74830.692020] ? show_trace_log_lvl+0x1c4/0x2df [74830.693095] ? ipt_do_table+0x286/0x710 [ip_tables] [74830.694275] ? __die_body.cold+0x8/0xd [74830.695205] ? page_fault_oops+0xac/0x140 [74830.696244] ? exc_page_fault+0x62/0x150 [74830.697225] ? asm_exc_page_fault+0x22/0x30 [74830.698344] ? rpfilter_mt+0x44/0x15e [ipt_rpfilter] [74830.699540] ipt_do_table+0x286/0x710 [ip_tables] [74830.700758] ? ip6_route_input+0x19d/0x240 [74830.701752] nf_hook_slow+0x3f/0xb0 [74830.702678] input_action_end_dx4+0x19b/0x1e0 [74830.703735] ? input_action_end_t+0xe0/0xe0 [74830.704734] seg6_local_input_core+0x2d/0x60 [74830.705782] lwtunnel_input+0x5b/0xb0 [74830.706690] __netif_receive_skb_one_core+0x63/0xa0 [74830.707825] process_backlog+0x99/0x140 [74830.709538] __napi_poll+0x2c/0x160 [74830.710673] net_rx_action+0x296/0x350 [74830.711860] __do_softirq+0xcb/0x2ac [74830.713049] do_softirq+0x63/0x90 input_action_end_dx4() passing a NULL indev to NF_HOOK(), and finally trigger a NULL dereference in rpfilter_mt()->rpfilter_is_loopback(): static bool rpfilter_is_loopback(const struct sk_buff *skb, const struct net_device *in) { // in is NULL return skb->pkt_type == PACKET_LOOPBACK || in->flags & IFF_LOOPBACK; } Fixes: 7a3f5b0d ("netfilter: add netfilter hooks to SRv6 data plane") Signed-off-by: -
Jozsef Kadlecsik authored
When destroying all sets, we are either in pernet exit phase or are executing a "destroy all sets command" from userspace. The latter was taken into account in ip_set_dereference() (nfnetlink mutex is held), but the former was not. The patch adds the required check to rcu_dereference_protected() in ip_set_dereference(). Fixes: 4e7aaa6b ("netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type") Reported-by: syzbot+b62c37cdd58103293a5a@syzkaller.appspotmail.com Reported-by: syzbot+cfbe1da5fdfc39efc293@syzkaller.appspotmail.com Reported-by:
kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202406141556.e0b6f17e-lkp@intel.comSigned-off-by:
Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by:
-
Adrian Moreno authored
Netlink flags, although they don't have payload at the netlink level, are represented as having "True" as value in pyroute2. Without it, trying to add a flow with a flag-type action (e.g: pop_vlan) fails with the following traceback: Traceback (most recent call last): File "[...]/ovs-dpctl.py", line 2498, in <module> sys.exit(main(sys.argv)) ^^^^^^^^^^^^^^ File "[...]/ovs-dpctl.py", line 2487, in main ovsflow.add_flow(rep["dpifindex"], flow) File "[...]/ovs-dpctl.py", line 2136, in add_flow reply = self.nlm_request( ^^^^^^^^^^^^^^^^^ File "[...]/pyroute2/netlink/nlsocket.py", line 822, in nlm_request return tuple(self._genlm_request(*argv, **kwarg)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "[...]/pyroute2/netlink/generic/__init__.py", line 126, in nlm_request return tuple(super().nlm_request(*argv, **kwarg)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "[...]/pyroute2/netlink/nlsocket.py", line 1124, in nlm_request self.put(msg, msg_type, msg_flags, msg_seq=msg_seq) File "[...]/pyroute2/netlink/nlsocket.py", line 389, in put self.sendto_gate(msg, addr) File "[...]/pyroute2/netlink/nlsocket.py", line 1056, in sendto_gate msg.encode() File "[...]/pyroute2/netlink/__init__.py", line 1245, in encode offset = self.encode_nlas(offset) ^^^^^^^^^^^^^^^^^^^^^^^^ File "[...]/pyroute2/netlink/__init__.py", line 1560, in encode_nlas nla_instance.setvalue(cell[1]) File "[...]/pyroute2/netlink/__init__.py", line 1265, in setvalue nlv.setvalue(nla_tuple[1]) ~~~~~~~~~^^^ IndexError: list index out of range Signed-off-by:Adrian Moreno <amorenoz@redhat.com> Acked-by:
Aaron Conole <aconole@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geetha sowjanya authored
This patch fixes the below build warning messages that are caused due to linking same files to multiple modules by exporting the required symbols. "scripts/Makefile.build:244: drivers/net/ethernet/marvell/octeontx2/nic/Makefile: otx2_devlink.o is added to multiple modules: rvu_nicpf rvu_nicvf scripts/Makefile.build:244: drivers/net/ethernet/marvell/octeontx2/nic/Makefile: otx2_dcbnl.o is added to multiple modules: rvu_nicpf rvu_nicvf" Fixes: 8e675581 ("octeontx2-pf: PFC config support with DCBx"). Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Reviewed-by:
-
Simon Horman authored
otx2_sq_append_skb makes used of __vlan_hwaccel_push_inside() to unoffload VLANs - push them from skb meta data into skb data. However, it omitts a check for __vlan_hwaccel_push_inside() returning NULL. Found by inspection based on [1] and [2]. Compile tested only. [1] Re: [PATCH net-next v1] net: stmmac: Enable TSO on VLANs https://lore.kernel.org/all/ZmrN2W8Fye450TKs@shell.armlinux.org.uk/ [2] Re: [PATCH net-next v2] net: stmmac: Enable TSO on VLANs https://lore.kernel.org/all/CANn89i+11L5=tKsa7V7Aeyxaj6nYGRwy35PAbCRYJ73G+b25sg@mail.gmail.com/ Fixes: fd9d7859 ("octeontx2-pf: Implement ingress/egress VLAN offload") Signed-off-by: -
David S. Miller authored
Heng Qi says: ==================== virtio_net: fixes for checksum offloading and XDP handling This series of patches aim to address two specific issues identified in the virtio_net driver related to checksum offloading and XDP processing of fully checksummed packets. The first patch corrects the handling of checksum offloading in the driver. The second patch addresses an issue where the XDP program had no trouble with fully checksummed packets. ==================== Signed-off-by: -
Heng Qi authored
The XDP program can't correctly handle partially checksummed packets, but works fine with fully checksummed packets. If the device has already validated fully checksummed packets, then the driver doesn't need to re-validate them, saving CPU resources. Additionally, the driver does not drop all partially checksummed packets when VIRTIO_NET_F_GUEST_CSUM is not negotiated. This is not a bug, as the driver has always done this. Fixes: 436c9453 ("virtio-net: keep vnet header zeroed after processing XDP") Signed-off-by:
Heng Qi <hengqi@linux.alibaba.com> Signed-off-by:
-
Heng Qi authored
In virtio spec 0.95, VIRTIO_NET_F_GUEST_CSUM was designed to handle partially checksummed packets, and the validation of fully checksummed packets by the device is independent of VIRTIO_NET_F_GUEST_CSUM negotiation. However, the specification erroneously stated: "If VIRTIO_NET_F_GUEST_CSUM is not negotiated, the device MUST set flags to zero and SHOULD supply a fully checksummed packet to the driver." This statement is inaccurate because even without VIRTIO_NET_F_GUEST_CSUM negotiation, the device can still set the VIRTIO_NET_HDR_F_DATA_VALID flag. Essentially, the device can facilitate the validation of these packets' checksums - a process known as RX checksum offloading - removing the need for the driver to do so. This scenario is currently not implemented in the driver and requires correction. The necessary specification correction[1] has been made and approved in the virtio TC vote. [1] https://lists.oasis-open.org/archives/virtio-comment/202401/msg00011.html Fixes: 4f49129b ("virtio-net: Set RXCSUM feature if GUEST_CSUM is available") Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Jose Ignacio Tornos Martinez authored
After ecf848eb ("net: usb: ax88179_178a: fix link status when link is set to down/up") to not reset from usbnet_open after the reset from usbnet_probe at initialization stage to speed up this, some issues have been reported. It seems to happen that if the initialization is slower, and some time passes between the probe operation and the open operation, the second reset from open is necessary too to have the device working. The reason is that if there is no activity with the phy, this is "disconnected". In order to improve this, the solution is to detect when the phy is "disconnected", and we can use the phy status register for this. So we will only reset the device from reset operation in this situation, that is, only if necessary. The same bahavior is happening when the device is stopped (link set to down) and later is restarted (link set to up), so if the phy keeps working we only need to enable the mac again, but if enough time passes between the device stop and restart, reset is necessary, and we can detect the situation checking the phy status register too. cc: stable@vger.kernel.org # 6.6+ Fixes: ecf848eb ("net: usb: ax88179_178a: fix link status when link is set to down/up") Reported-by:
Yongqin Liu <yongqin.liu@linaro.org> Reported-by:
Antje Miederhöfer <a.miederhoefer@gmx.de> Reported-by:
Arne Fitzenreiter <arne_f@ipfire.org> Tested-by:
Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by:
-
Xiaolei Wang authored
commit be27b896 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters") introduced a problem. When deleting, it prompts "Invalid portTransmitRate 0 (idleSlope - sendSlope)" and exits. Add judgment on cbs.enable. Only when offload is enabled, speed divider needs to be calculated. Fixes: be27b896 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters") Signed-off-by:
Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by:
-
Oleksij Rempel authored
Get master/slave configuration for initial system start with the link in down state. This ensures ethtool shows current configuration. Also fixes link reconfiguration with ethtool while in down state, preventing ethtool from displaying outdated configuration. Even though dp83tg720_config_init() is executed periodically as long as the link is in admin up state but no carrier is detected, this is not sufficient for the link in admin down state where dp83tg720_read_status() is not periodically executed. To cover this case, we need an extra read role configuration in dp83tg720_config_aneg(). Fixes: cb80ee2f ("net: phy: Add support for the DP83TG720S Ethernet PHY") Cc: stable@vger.kernel.org Signed-off-by:
-
Oleksij Rempel authored
In case this PHY is bootstrapped for managed mode, we need to manually wake it. Otherwise no link will be detected. Cc: stable@vger.kernel.org Fixes: cb80ee2f ("net: phy: Add support for the DP83TG720S Ethernet PHY") Signed-off-by:
-
- 18 Jun, 2024 7 commits
-
-
Linus Torvalds authored
Merge tag 'linux_kselftest-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: - filesystems: warn_unused_result warnings - seccomp: format-zero-length warnings - fchmodat2: clang build warnings due to-static-libasan - openat2: clang build warnings due to static-libasan, LOCAL_HDRS * tag 'linux_kselftest-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/fchmodat2: fix clang build failure due to -static-libasan selftests/openat2: fix clang build failures: -static-libasan, LOCAL_HDRS selftests: seccomp: fix format-zero-length warnings selftests: filesystems: fix warn_unused_result build warnings
-
Simon Horman authored
openvswitch.sh makes use of substitutions of the form ${ns:0:1}, to obtain the first character of $ns. Empirically, this is works with bash but not dash. When run with dash these evaluate to an empty string and printing an error to stdout. # dash -c 'ns=client; echo "${ns:0:1}"' 2>error # cat error dash: 1: Bad substitution # bash -c 'ns=client; echo "${ns:0:1}"' 2>error c # cat error This leads to tests that neither pass nor fail. F.e. TEST: arp_ping [START] adding sandbox 'test_arp_ping' Adding DP/Bridge IF: sbx:test_arp_ping dp:arpping {, , } create namespaces ./openvswitch.sh: 282: eval: Bad substitution TEST: ct_connect_v4 [START] adding sandbox 'test_ct_connect_v4' Adding DP/Bridge IF: sbx:test_ct_connect_v4 dp:ct4 {, , } ./openvswitch.sh: 322: eval: Bad substitution create namespaces Resolve this by making openvswitch.sh a bash script. Fixes: 918423fd ("selftests: openvswitch: add an initial flow programming case") Signed-off-by: -
Dan Carpenter authored
On 32bit systems, the "4 * max" multiply can overflow. Use kcalloc() to do the allocation to prevent this. Fixes: 44c494c8 ("ptp: track available ptp vclocks information") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
-
Linus Torvalds authored
Hardcoding the number of CPUs at compile time does improve code generation, but if you get it wrong the result will be confusion. We already limited this earlier to only "experts" (see commit fe5759d5 "cpumask: limit visibility of FORCE_NR_CPUS"), but with distro kernel configs often having EXPERT enabled, that turns out to not be much of a limit. To quote the philosophers at Disney: "Everyone can be an expert. And when everyone's an expert, no one will be". There's a runtime warning if you then set nr_cpus to anything but the forced number, but apparently that can be ignored too [1] and by then it's pretty much too late anyway. If we had some real way to limit this to "embedded only", maybe it would be worth it, but let's see if anybody even notices that the option is gone. We need to simplify kernel configuration anyway. Link: https://lore.kernel.org/all/20240618105036.208a8860@rorschach.local.home/ [1] Reported-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Paul McKenney <paulmck@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: "Another small set of EFI fixes. Only the x86 one is likely to affect any actual users (and has a cc:stable), but the issue it fixes was only observed in an unusual context (kexec in a confidential VM). - Ensure that EFI runtime services are not unmapped by PAN on ARM - Avoid freeing the memory holding the EFI memory map inadvertently on x86 - Avoid a false positive kmemleak warning on arm64" * tag 'efi-fixes-for-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/arm64: Fix kmemleak false positive in arm64_efi_rt_init() efi/x86: Free EFI memory map only when installing a new one. efi/arm: Disable LPAE PAN when calling EFI runtime services -
Xin Long authored
zones_ht is a global hashtable for flow_table with zone as key. However, it does not consider netns when getting a flow_table from zones_ht in tcf_ct_init(), and it means an act_ct action in netns A may get a flow_table that belongs to netns B if it has the same zone value. In Shuang's test with the TOPO: tcf2_c <---> tcf2_sw1 <---> tcf2_sw2 <---> tcf2_s tcf2_sw1 and tcf2_sw2 saw the same flow and used the same flow table, which caused their ct entries entering unexpected states and the TCP connection not able to end normally. This patch fixes the issue simply by adding netns into the key of tcf_ct_flow_table so that an act_ct action gets a flow_table that belongs to its own netns in tcf_ct_init(). Note that for easy coding we don't use tcf_ct_flow_table.nf_ft.net, as the ct_ft is initialized after inserting it to the hashtable in tcf_ct_flow_table_get() and also it requires to implement several functions in rhashtable_params including hashfn, obj_hashfn and obj_cmpfn. Fixes: 64ff70b8 ("net/sched: act_ct: Offload established connections to flow table") Reported-by:
Shuang Li <shuali@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
-
Xin Long authored
As it says in commit 3bc07321 ("xfrm: Force a dst refcount before entering the xfrm type handlers"): "Crypto requests might return asynchronous. In this case we leave the rcu protected region, so force a refcount on the skb's destination entry before we enter the xfrm type input/output handlers." On TIPC decryption path it has the same problem, and skb_dst_force() should be called before doing decryption to avoid a possible crash. Shuang reported this issue when this warning is triggered: [] WARNING: include/net/dst.h:337 tipc_sk_rcv+0x1055/0x1ea0 [tipc] [] Kdump: loaded Tainted: G W --------- - - 4.18.0-496.el8.x86_64+debug [] Workqueue: crypto cryptd_queue_worker [] RIP: 0010:tipc_sk_rcv+0x1055/0x1ea0 [tipc] [] Call Trace: [] tipc_sk_mcast_rcv+0x548/0xea0 [tipc] [] tipc_rcv+0xcf5/0x1060 [tipc] [] tipc_aead_decrypt_done+0x215/0x2e0 [tipc] [] cryptd_aead_crypt+0xdb/0x190 [] cryptd_queue_worker+0xed/0x190 [] process_one_work+0x93d/0x17e0 Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication") Reported-by:
-
