- 27 Jun, 2017 12 commits
-
-
Adrian Hunter authored
Add ptwrite to the op code map and the perf tools new instructions test. To run the test: $ tools/perf/perf test "x86 ins" 39: Test x86 instruction decoder - new instructions : Ok Or to see the details: $ tools/perf/perf test -v "x86 ins" 2>&1 | grep ptwrite For information about ptwrite, refer the Intel SDM. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Link: http://lkml.kernel.org/r/1495180230-19367-1-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Colin Ian King authored
Trivial fix to typo in jvmti_close() warnx warning message. Signed-off-by:
Colin King <colin.king@canonical.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20170627124917.19151-1-colin.king@canonical.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Finally can nuke this function, no more users. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-eivvvzn8ie6w42gy3batxoy7@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Just warn the user and ignore those values. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-tbf60nj3ierm6hrkhpothymx@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To consolidate the error reporting facility. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-b41iot1094katoffdf19w9zk@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Now everything uses pr_warning(), so ditch it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-hv8r0mgdhk73wtfq3zrhavgx@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Convert sole user of warning() in this file to pr_warning(), consolidating error reporting facilities. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-3y7yf6v673ujl2rcs34tzv8n@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
warning() is going away, consolidating error reporting. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-5r3636cwl4z1varo90mervai@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Complete the switch to using te pr_{warning,error,etc} error reporting facilities. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-3l9gr6237b4aqyo0rsspixe2@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
And switch from warning() to pr_warning(), to elliminate another duplication: too many error reporting facilities. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-pkzcjrhek3uuqc4i5i9ealwd@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
The warning(str_error_r(errno)) pattern can be replaced with a function, do it. And while at it use pr_warning(), we have way too many error reporting facilities, time to drop some, starting with the one we got from the git sources. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-lbak5npj1ri1uuvf1en3c0p0@git.kernel.orgSigned-off-by:
-
Thomas Richter authored
This patch adds platform dependency into the test case 15 (perf_event_attr). It is based on a suggestion from Jiri Olsa. Add a new optional attribute named 'arch' in the [config] section of the test case file. It is a comma separated list of architecture names this test can be executed on. For example: arch = x86_64,alpha,ppc If this attribute is missing the test is executed on any platform. This does not break existing behavior. The values listed for this attribute should be identical to uname -m output. If the list starts with an exclamation mark (!) the comparison is inverted, for example for arch = !s390x,ppc the test is not executed on s390x or ppc platforms. The exclamation mark must be at the beginnning of the list. Here is an example debug output: [root@s35lp76]# fgrep arch tests/attr/test-stat-C2 arch = x86_64,alpha,ppc [root@s35lp76]# PERF_TEST_ATTR=/tmp /usr/bin/python2 ./tests/attr.py \ -d ./tests/attr/ -p ./perf -vvvvv -t test-stat-C1 provides the following output: running './tests/attr//test-stat-C1' test limitation 'x86_64,alpha,ppc' <--- new loading expected events Event event:base-stat fd = 1 group_fd = -1 ..... Here is the output when a test is skipped: [root@s35lp76]# fgrep arch tests/attr/test-stat-C1 arch = !s390x [root@s35lp76]# PERF_TEST_ATTR=/tmp /usr/bin/python2 ./tests/attr.py \ -d ./tests/attr/ -p ./perf -vvvvv -t test-stat-C1 provides the following output: test limitation '!s390x' <--- new skipped [s390x] './tests/attr//test-stat-C1' <--- new The test is skipped with return code 0. Suggested-and-Acked-by:Jiri Olsa <jolsa@redhat.com> Reviewed-by:
Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: linux-s390@vger.kernel.org Link: http://lkml.kernel.org/r/20170622073625.86762-1-tmricht@linux.vnet.ibm.comSigned-off-by:
-
- 21 Jun, 2017 23 commits
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-4.13-20170621' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Add support to measure SMI cost in 'perf stat' (Kan Liang) - Add support for unwinding callchains in powerpc with libdw (Paolo Bonzini) Fixes: - Fix message: cpu list option is -C not -c (Adrian Hunter) - Fix 'perf script' message: field list option is -F not -f (Adrian Hunter) - Intel PT fixes: (Adrian Hunter) o Fix missing stack clear o Ensure IP is zero when state is INTEL_PT_STATE_NO_IP o Fix last_ip usage o Ensure never to set 'last_ip' when packet 'count' is zero o Clear FUP flag on error o Fix transactions_sample_type Infrastructure changes: - Intel PT cleanups/refactorings (Adrian Hunter) o Use FUP always when scanning for an IP o Add missing __fallthrough o Remove redundant initial_skip checks o Allow decoding with branch tracing disabled o Add default config for pass-through branch enable o Add documentation for new config terms o Add decoder support for ptwrite and power event packets o Add reserved byte to CBR packet payload o Add decoder support for CBR events - Move find_process() to the only place that uses it, skimming some more fat from util.[ch] (Arnaldo Carvalho de Melo) - Do parameter validation earlier on fetch_kernel_version() (Arnaldo Carvalho de Melo) - Remove unused _ALL_SOURCE define (Arnaldo Carvalho de Melo) - Add sysfs__write_int function (Kan Liang) Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Adrian Hunter authored
Fix message because field list option is -F not -f. Signed-off-by:
-
Adrian Hunter authored
Fix message because cpu list option is -C not -c Signed-off-by:
-
Adrian Hunter authored
'transactions_sample_type' is needed to correctly inject transactions samples but it was not being set. Set it from the event sample type. Signed-off-by:
-
Adrian Hunter authored
'initial_skip' is checked inside the sample synthesis functions which means it is actually being done twice for 'instructions' and 'transactions' samples. Remove the redundant checks. Signed-off-by:
-
Adrian Hunter authored
Add decoder support for informing the tools of changes to the core-to-bus ratio (CBR). Signed-off-by:
-
Adrian Hunter authored
Future proof CBR packet decoding by passing through also the undefined 'reserved' byte in the packet payload. Signed-off-by:
-
Adrian Hunter authored
Add decoder support for PTWRITE, MWAIT, PWRE, PWRX and EXSTOP packets. This patch only affects the decoder, so the tools still do not select or consume the new information. That is added in subsequent patches. Signed-off-by:
-
Adrian Hunter authored
Add documentation for new config terms. Signed-off-by:
-
Adrian Hunter authored
Branch tracing is enabled by default, so a fake config bit called 'pt' (pass-through) was added to allow the 'branch enable' bit to have affect. Add default config 'pt,branch' which will allow users to disable branch tracing using 'branch=0' instead of having to specify 'pt,branch=0'. Signed-off-by:
-
Adrian Hunter authored
The kernel now supports the disabling of branch tracing, however the decoder assumes branch tracing is always enabled. Pass through a parameter to indicate whether branch tracing is enabled and use it to avoid cases when the decoder is expecting branch packets. There are 2 such cases. First, FUP packets which can bind to an IP even when there is no branch tracing. Secondly, the decoder will try to use branch packets to find an IP to start decoding or to recover from errors. Signed-off-by:
-
Adrian Hunter authored
perf tools uses __fallthrough. Add missing __fallthrough to a switch statement. Signed-off-by:
-
Adrian Hunter authored
Sometimes a FUP packet is associated with a TSX transaction and a flag is set to indicate that. Ensure that flag is cleared on any error condition because at that point the decoder can no longer assume it is correct. Signed-off-by:
-
Adrian Hunter authored
The decoder will try to use branch packets to find an IP to start decoding or to recover from errors. Currently the FUP packet is used only in the case of an overflow, however there is no reason for that to be a special case. So just use FUP always when scanning for an IP. Signed-off-by:
-
Adrian Hunter authored
Intel PT uses IP compression based on the last IP. For decoding purposes, 'last IP' is not updated when a branch target has been suppressed, which is indicated by IPBytes == 0. IPBytes is stored in the packet 'count', so ensure never to set 'last_ip' when packet 'count' is zero. Signed-off-by:
-
Adrian Hunter authored
Intel PT uses IP compression based on the last IP. For decoding purposes, 'last IP' is considered to be reset to zero whenever there is a synchronization packet (PSB). The decoder wasn't doing that, and was treating the zero value to mean that there was no last IP, whereas compression can be done against the zero value. Fix by setting last_ip to zero when a PSB is received and keep track of have_last_ip. Signed-off-by:
-
Adrian Hunter authored
A value of zero is used to indicate that there is no IP. Ensure the value is zero when the state is INTEL_PT_STATE_NO_IP. Signed-off-by:
-
Adrian Hunter authored
The return compression stack must be cleared whenever there is a PSB. Fix one case where that was not happening. Signed-off-by:
-
Adrian Hunter authored
The decoder uses its current timestamp in samples. Usually that is a timestamp that has already passed, but in some cases it is a timestamp for a branch that the decoder is walking towards, and consequently hasn't reached. Improve that situation by using the pkt_state to determine when to use the current or previous timestamp. Signed-off-by:
-
Adrian Hunter authored
Move decoder error setting into one condition. Cc'ed to stable because later fixes depend on it. Signed-off-by:
-
Paolo Bonzini authored
Porting PPC to libdw only needs an architecture-specific hook to move the register state from perf to libdw. The ARM and x86 architectures already use libdw, and it is useful to have as much common code for the unwinder as possible. Mark Wielaard has contributed a frame-based unwinder to libdw, so that unwinding works even for binaries that do not have CFI information. In addition, libunwind is always preferred to libdw by the build machinery so this cannot introduce regressions on machines that have both libunwind and libdw installed. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
Milian Wolff <milian.wolff@kdab.com> Acked-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1496312681-20133-1-git-send-email-pbonzini@redhat.comSigned-off-by:
-
Kan Liang authored
Implementing a new --smi-cost mode in perf stat to measure SMI cost. During the measurement, the /sys/device/cpu/freeze_on_smi will be set. The measurement can be done with one counter (unhalted core cycles), and two free running MSR counters (IA32_APERF and SMI_COUNT). In practice, the percentages of SMI core cycles should be more useful than absolute value. So the output will be the percentage of SMI core cycles and SMI#. metric_only will be set by default. SMI cycles% = (aperf - unhalted core cycles) / aperf Here is an example output. Performance counter stats for 'sudo echo ': SMI cycles% SMI# 0.1% 1 0.010858678 seconds time elapsed Users who wants to get the actual value can apply additional --no-metric-only. Signed-off-by:Kan Liang <Kan.liang@intel.com> Acked-by:
-
Kan Liang authored
Add sysfs__write_int() to ease up writing int to sysfs. New interface is: int sysfs__write_int(const char *entry, int value); Also, introducing filename__write_int() which is useful for new helpers to write sysctl values. Signed-off-by:
-
- 20 Jun, 2017 5 commits
-
-
Arnaldo Carvalho de Melo authored
Curious as to what this was for I looked at /usr/include/ and only some python headers define this, and it ends up being to enable "extensions" on some old OSes: /* Enable extensions on AIX 3, Interix */ I guess we can remove this one safely. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-omnundlxo2brs552bdl6m0j1@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
While trying to reduce util.[ch] I noticed that fetch_kernel_version() and fetch_ubuntu_kernel_version() do lots of operations only to check if they are needed, i.e. it checks if the pointer where to return the kernel version is NULL only after obtaining the kernel version from /proc/version_signature or by parsing the results from uname(). Do it earlier not to confuse people reading this code in the future :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-i94qwyekk4tzbu0b9ce1r1mz@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
And make it static, nobody else uses it, if we ever need it in more places we can carve a new source file for process related methods, for now lets reduce util.{c,h} a tad more. Link: http://lkml.kernel.org/n/tip-zgb28rllvypjibw52aaz9p15@git.kernel.orgSigned-off-by: -
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-4.13-20170719' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Allow adding and removing fields to the default 'perf script' columns, using + or - as field prefixes to do so (Andi Kleen) - Display titles in left frame in the annotate browser (Jin Yao) - Allow resolving the DSO name with 'perf script -F brstack{sym,off},dso' (Mark Santaniello) - Support function filtering in 'perf ftrace' (Namhyung Kim) - Allow specifying function call depth in 'perf ftrace' (Namhyumg Kim) Infrastructure changes: - Adopt __noreturn, __printf, __scanf, noinline, __packed and __aligned __alignment__(()) markers, to make the tools/ source code base to be more compact and look more like kernel code (Arnaldo Carvalho de Melo) - Remove unnecessary check in annotate_browser_write() (Jin Yao) - Return arch from symbol__disassemble() so that callers, such as the annotate TUI browser to use arch specific formattings, such as the upcoming instruction micro-op fusion on Intel Core (Jin Yao) - Remove superfluous check before use in the coresight code base (Kim Phillips) - Remove unused SAMPLE_SIZE defines and BTS priv array (Kim Phillips) - Error handling fix/tidy ups in 'perf config' (Taeung Song) - Avoid error in the BPF proggie built with clang in 'perf test llvm' when PROFILE_ALL_BRANCHES is set (Wang Nan) Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
