Pull nios2 updates from Ley Foon Tan:
 "Most of updates are MMU related"

* tag 'nios2-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: Fix update_mmu_cache preload the TLB with the new PTE
  nios2: update_mmu_cache preload the TLB with the new PTE
  nios2: User address TLB flush break after finding the matching entry
  nios2: flush_tlb_all use TLBMISC way auto-increment feature
  nios2: improve readability of tlb functions
  nios2: flush_tlb_mm flush only the pid
  nios2: flush_tlb_pid can just restore TLBMISC once
  nios2: TLBMISC writes do not require PID bits to be set
  nios2: Use an invalid TLB entry address helper function
  nios2: pte_clear does not need to flush TLB
  nios2: flush_tlb_page use PID based flush
  nios2: update_mmu_cache clear the old entry from the TLB
  nios2: remove redundant 'default n' from Kconfig-s
  nios2: ksyms: Add missing symbol exports

Merge tag 'for-5.1/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Update bio-based DM core to always call blk_queue_split() and update
   DM targets to properly advertise discard limits that
   blk_queue_split() looks at when dtermining to split discard. Whereby
   allowing DM core's own 'split_discard_bios' to be removed.

 - Improve DM cache target to provide support for discard passdown to
   the origin device.

 - Introduce support to directly boot to a DM mapped device from init by
   using dm-mod.create= module param. This eliminates the need for an
   elaborate initramfs that is otherwise needed to create DM devices.

   This feature's implementation has been worked on for quite some time
   (got up to v12) and is of particular interest to Android and other
   more embedded platforms (e.g. ARM).

 - Rate limit errors from the DM integrity target that were identified
   as the cause for recent NMI hangs due to console limitations.

 - Add sanity checks for user input to thin-pool and external snapshot
   creation.

 - Remove some unused leftover kmem caches from when old .request_fn
   request-based support was removed.

 - Various small cleanups and fixes to targets (e.g. typos, needless
   unlikely() annotations, use struct_size(), remove needless
   .direct_access method from dm-snapshot)

* tag 'for-5.1/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm integrity: limit the rate of error messages
  dm snapshot: don't define direct_access if we don't support it
  dm cache: add support for discard passdown to the origin device
  dm writecache: fix typo in name for writeback_wq
  dm: add support to directly boot to a mapped device
  dm thin: add sanity checks to thin-pool and external snapshot creation
  dm block manager: remove redundant unlikely annotation
  dm verity fec: remove redundant unlikely annotation
  dm integrity: remove redundant unlikely annotation
  dm: always call blk_queue_split() in dm_process_bio()
  dm: fix to_sector() for 32bit
  dm switch: use struct_size() in kzalloc()
  dm: remove unused _rq_tio_cache and _rq_cache
  dm: eliminate 'split_discard_bios' flag from DM target interface
  dm: update dm_process_bio() to split bio if in ->make_request_fn()

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
  hisi_sas, target/iscsi and target/core.

  Additionally Christoph refactored gdth as part of the dma changes. The
  major mid-layer change this time is the removal of bidi commands and
  with them the whole of the osd/exofs driver and filesystem. This is a
  major simplification for block and mq in particular"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
  scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
  scsi: cxgb4i: get pf number from lldi->pf
  scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
  scsi: mpt3sas: Add missing breaks in switch statements
  scsi: aacraid: Fix missing break in switch statement
  scsi: kill command serial number
  scsi: csiostor: drop serial_number usage
  scsi: mvumi: use request tag instead of serial_number
  scsi: dpt_i2o: remove serial number usage
  scsi: st: osst: Remove negative constant left-shifts
  scsi: ufs-bsg: Allow reading descriptors
  scsi: ufs: Allow reading descriptor via raw upiu
  scsi: ufs-bsg: Change the calling convention for write descriptor
  scsi: ufs: Remove unused device quirks
  Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  scsi: megaraid_sas: Remove a bunch of set but not used variables
  scsi: clean obsolete return values of eh_timed_out
  scsi: sd: Optimal I/O size should be a multiple of physical block size
  scsi: MAINTAINERS: SCSI initiator and target tweaks
  scsi: fcoe: make use of fip_mode enum complete
  ...

Pull rdma updates from Jason Gunthorpe:
 "This has been a slightly more active cycle than normal with ongoing
  core changes and quite a lot of collected driver updates.

   - Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe

   - A new data transfer mode for HFI1 giving higher performance

   - Significant functional and bug fix update to the mlx5
     On-Demand-Paging MR feature

   - A chip hang reset recovery system for hns

   - Change mm->pinned_vm to an atomic64

   - Update bnxt_re to support a new 57500 chip

   - A sane netlink 'rdma link add' method for creating rxe devices and
     fixing the various unregistration race conditions in rxe's
     unregister flow

   - Allow lookup up objects by an ID over netlink

   - Various reworking of the core to driver interface:
       - drivers should not assume umem SGLs are in PAGE_SIZE chunks
       - ucontext is accessed via udata not other means
       - start to make the core code responsible for object memory
         allocation
       - drivers should convert struct device to struct ib_device via a
         helper
       - drivers have more tools to avoid use after unregister problems"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits)
  net/mlx5: ODP support for XRC transport is not enabled by default in FW
  IB/hfi1: Close race condition on user context disable and close
  RDMA/umem: Revert broken 'off by one' fix
  RDMA/umem: minor bug fix in error handling path
  RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
  cxgb4: kfree mhp after the debug print
  IB/rdmavt: Fix concurrency panics in QP post_send and modify to error
  IB/rdmavt: Fix loopback send with invalidate ordering
  IB/iser: Fix dma_nents type definition
  IB/mlx5: Set correct write permissions for implicit ODP MR
  bnxt_re: Clean cq for kernel consumers only
  RDMA/uverbs: Don't do double free of allocated PD
  RDMA: Handle ucontext allocations by IB/core
  RDMA/core: Fix a WARN() message
  bnxt_re: fix the regression due to changes in alloc_pbl
  IB/mlx4: Increase the timeout for CM cache
  IB/core: Abort page fault handler silently during owning process exit
  IB/mlx5: Validate correct PD before prefetch MR
  IB/mlx5: Protect against prefetch of invalid MR
  RDMA/uverbs: Store PR pointer before it is overwritten
  ...

Pull PCI updates from Bjorn Helgaas:

 - Use match_string() instead of reimplementing it (Andy Shevchenko)

 - Enable SERR# forwarding for all bridges (Bharat Kumar Gogada)

 - Use Latency Tolerance Reporting if already enabled by platform (Bjorn
   Helgaas)

 - Save/restore LTR info for suspend/resume (Bjorn Helgaas)

 - Fix DPC use of uninitialized data (Dongdong Liu)

 - Probe bridge window attributes only once at enumeration-time to fix
   device accesses during rescan (Bjorn Helgaas)

 - Return BAR size (not "size -1 ") from pci_size() to simplify code (Du
   Changbin)

 - Use config header type (not class code) identify bridges more
   reliably (Honghui Zhang)

 - Work around Intel Denverton incorrect Trace Hub BAR size reporting
   (Alexander Shishkin)

 - Reorder pciehp cached state/hardware state updates to avoid missed
   interrupts (Mika Westerberg)

 - Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann)

 - Mark expected switch fall-through (Mathieu Malaterre)

 - Use of_node_name_eq() for node name comparisons (Rob Herring)

 - Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang)

 - Consolidate Rohm Vendor ID definitions (Andy Shevchenko)

 - Use u32 (not __u32) for things not exposed to userspace (Logan
   Gunthorpe)

 - Fix locking semantics of bus and slot reset interfaces (Alex
   Williamson)

 - Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang)

 - Allow portdrv to claim subtractive decode Ports so PCIe services will
   work for them (Honghui Zhang)

 - Report PCIe links that become degraded at run-time (Alexandru
   Gagniuc)

 - Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt
   hotplug (Mika Westerberg)

 - Revert runtime PM suspend/resume callbacks that broke PME on network
   cable plug (Mika Westerberg)

 - Disable Data Link State Changed interrupts to prevent wakeup
   immediately after suspend (Mika Westerberg)

 - Extend altera to support Stratix 10 (Ley Foon Tan)

 - Allow building altera driver on ARM64 (Ley Foon Tan)

 - Replace Douglas with Tom Joseph as Cadence PCI host/endpoint
   maintainer (Lorenzo Pieralisi)

 - Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro)

 - Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I)

 - Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay
   Abraham I)

 - Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I)

 - Simplify dwc (remove unnecessary header includes, name variables
   consistently, reduce inverted logic, etc) (Gustavo Pimentel)

 - Add i.MX8MQ support (Andrey Smirnov)

 - Add message to help debug dwc MSI-X mask bit errors (Gustavo
   Pimentel)

 - Work around imx7d PCIe PLL erratum (Trent Piepho)

 - Don't assert qcom reset GPIO during probe (Bjorn Andersson)

 - Skip dwc MSI init if MSIs have been disabled (Lucas Stach)

 - Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI
   endpoint framework (Wen Yang)

 - Add interface to discover supported endpoint features to replace a
   bitfield that wasn't flexible enough (Kishon Vijay Abraham I)

 - Implement the new supported-feature interface for designware-plat,
   dra7xx, rockchip, cadence (Kishon Vijay Abraham I)

 - Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I)

 - Add layerscape endpoint mode support (Xiaowei Bao)

 - Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya
   Nakamura)

 - Rework hv_irq_unmask() to use cpumask_to_vpset() instead of
   open-coded reimplementation (Maya Nakamura)

 - Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura)

 - Fix mediatek MMIO size computation to enable full size of available
   MMIO space (Honghui Zhang)

 - Fix mediatek DMA window size computation to allow endpoint DMA access
   to full DRAM address range (Honghui Zhang)

 - Fix mvebu prefetchable BAR regression caused by common bridge
   emulation that assumed all bridges had prefetchable windows (Thomas
   Petazzoni)

 - Make advk_pci_bridge_emul_ops static (Wei Yongjun)

 - Configure MPS settings for VMD root ports (Jon Derrick)

* tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits)
  PCI: Update PCIEPORTBUS Kconfig help text
  PCI: Fix "try" semantics of bus and slot reset
  PCI/LINK: Report degraded links via link bandwidth notification
  dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0
  PCI: altera: Enable driver on ARM64
  PCI: altera: Add Stratix 10 PCIe support
  PCI/PME: Fix possible use-after-free on remove
  PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static
  PCI: dwc: skip MSI init if MSIs have been explicitly disabled
  PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
  PCI: hv: Replace hv_vp_set with hv_vpset
  PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt
  PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM
  PCI: mediatek: Fix memory mapped IO range size computation
  PCI: dwc: Remove superfluous shifting in definitions
  PCI: dwc: Make use of GENMASK/FIELD_PREP
  PCI: dwc: Make use of BIT() in constant definitions
  PCI: dwc: Share code for dw_pcie_rd/wr_other_conf()
  PCI: dwc: Make use of IS_ALIGNED()
  PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ
  ...

Pull media updates from Mauro Carvalho Chehab:

 - remove sensor drivers that got converted from soc_camera

 - remaining soc_camera drivers got moved to staging

 - some documentation cleanups and improvements

 - the imx staging driver now supports imx7

 - the ov9640, mt9m001 and mt9m111 got converted from soc_camera

 - the vim2m driver now does what a m2m convert driver expects to do

 - epoll() fixes on media subsystems

 - several drivers fixes, typos, cleanups and improvements

* tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (346 commits)
  media: dvb/earth-pt1: fix wrong initialization for demod blocks
  media: vim2m: Address some coding style issues
  media: vim2m: don't use BUG()
  media: vim2m: speedup passthrough copy
  media: vim2m: add an horizontal scaler
  media: vim2m: don't accept YUYV anymore as output format
  media: vim2m: add vertical linear scaler
  media: vim2m: better handle cap/out buffers with different sizes
  media: vim2m: use different framesizes for bayer formats
  media: vim2m: add support for VIDIOC_ENUM_FRAMESIZES
  media: vim2m: ensure that width is multiple of two
  media: vim2m: improve debug messages
  media: vim2m: add bayer capture formats
  media: a few more typos at staging, pci, platform, radio and usb
  media: Documentation: fix several typos
  media: staging: fix several typos
  media: include: fix several typos
  media: common: fix several typos
  media: v4l2-core: fix several typos
  media: usb: fix several typos
  ...

Pull gfs2 updates from Bob Peterson:
 "We've only got three patches ready for this merge window:

   - Fix a hang related to missed wakeups for glocks from Andreas
     Gruenbacher

   - Rework of how gfs2 manages its debugfs files from Greg K-H

   - An incorrect assert when truncating or deleting files from Tim
     Smith"

* tag 'gfs2-5.1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix missed wakeups in find_insert_glock
  gfs2: Fix an incorrect gfs2_assert()
  gfs: no need to check return value of debugfs_create functions

Pull smb3 updates from Steve French:

 - smb3/cifs fixes including for large i/o error cases

 - fixes for three xfstests

 - improved crediting (smb3 flow control)

 - improved tracing

* tag '5.1-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (44 commits)
  fs: cifs: Kconfig: pedantic formatting
  smb3: request more credits on normal (non-large read/write) ops
  CIFS: Mask off signals when sending SMB packets
  CIFS: Return -EAGAIN instead of -ENOTSOCK
  CIFS: Only send SMB2_NEGOTIATE command on new TCP connections
  CIFS: Fix read after write for files with read caching
  smb3: for kerberos mounts display the credential uid used
  cifs: use correct format characters
  smb3: add dynamic trace point for query_info_enter/done
  smb3: add dynamic trace point for smb3_cmd_enter
  smb3: improve dynamic tracing of open and posix mkdir
  smb3: add missing read completion trace point
  smb3: Add tracepoints for read, write and query_dir enter
  smb3: add tracepoints for query dir
  smb3: Update POSIX negotiate context with POSIX ctxt GUID
  cifs: update internal module version number
  CIFS: Try to acquire credits at once for compound requests
  CIFS: Return error code when getting file handle for writeback
  CIFS: Move open file handling to writepages
  CIFS: Move unlocking pages from wdata_send_pages()
  ...

Pull fscrypt updates from Eric Biggers:
 "First: Ted, Jaegeuk, and I have decided to add me as a co-maintainer
  for fscrypt, and we're now using a shared git tree. So we've updated
  MAINTAINERS accordingly, and I'm doing the pull request this time.

  The actual changes for v5.1 are:

   - Remove the fs-specific kconfig options like CONFIG_EXT4_ENCRYPTION
     and make fscrypt support for all fscrypt-capable filesystems be
     controlled by CONFIG_FS_ENCRYPTION, similar to how CONFIG_QUOTA
     works.

   - Improve error code for rename() and link() into encrypted
     directories.

   - Various cleanups"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  MAINTAINERS: add Eric Biggers as an fscrypt maintainer
  fscrypt: return -EXDEV for incompatible rename or link into encrypted dir
  fscrypt: remove filesystem specific build config option
  f2fs: use IS_ENCRYPTED() to check encryption status
  ext4: use IS_ENCRYPTED() to check encryption status
  fscrypt: remove CRYPTO_CTR dependency

Pull leaking_addresses updates from Tobin Harding:
 "Here are two super trivial patches to the leaking addresses script.

  One fixes the debugging output which is currently broken in a bunch of
  places, the other removes the --version command line option.

  Both patches have been tested and sitting in linux-next tree for a
  month or so"

* tag 'leaks-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tobin/leaks:
  leaking_addresses: Completely remove --version flag
  leaking_addresses: Fix calls to dprint

Pull documentation updates from Jonathan Corbet:
 "A fairly routine cycle for docs - lots of typo fixes, some new
  documents, and more translations. There's also some LICENSES
  adjustments from Thomas"

* tag 'docs-5.1' of git://git.lwn.net/linux: (74 commits)
  docs: Bring some order to filesystem documentation
  Documentation/locking/lockdep: Drop last two chars of sample states
  doc: rcu: Suspicious RCU usage is a warning
  docs: driver-api: iio: fix errors in documentation
  Documentation/process/howto: Update for 4.x -> 5.x versioning
  docs: Explicitly state that the 'Fixes:' tag shouldn't split lines
  doc: security: Add kern-doc for lsm_hooks.h
  doc: sctp: Merge and clean up rst files
  Docs: Correct /proc/stat path
  scripts/spdxcheck.py: fix C++ comment style detection
  doc: fix typos in license-rules.rst
  Documentation: fix admin-guide/README.rst minimum gcc version requirement
  doc: process: complete removal of info about -git patches
  doc: translations: sync translations 'remove info about -git patches'
  perf-security: wrap paragraphs on 72 columns
  perf-security: elaborate on perf_events/Perf privileged users
  perf-security: document collected perf_events/Perf data categories
  perf-security: document perf_events/Perf resource control
  sysfs.txt: add note on available attribute macros
  docs: kernel-doc: typo "if ... if" -> "if ... is"
  ...

Pull printk updates from Petr Mladek:

 - Allow to sort mixed lines by an extra information about the caller

 - Remove no longer used LOG_PREFIX.

 - Some clean up and documentation update.

* tag 'printk-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  printk/docs: Add extra integer types to printk-formats
  printk: Remove no longer used LOG_PREFIX.
  lib/vsprintf: Remove %pCr remnant in comment
  printk: Pass caller information to log_store().
  printk: Add caller information to printk() output.

Merge tag 'linux-kselftest-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update fromShuah Khan:

 - ir test compile warnings fixes

 - seccomp test fixes and improvements from Tycho Andersen and Kees Cook

 - ftrace fixes to non-POSIX-compliant constructs in colored output code
   and handling absence of tput from Juerg Haefliger

* tag 'linux-kselftest-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ftrace: Handle the absence of tput
  selftests/ftrace: Replace \e with \033
  selftests/ftrace: Replace echo -e with printf
  selftests: ir: skip when non-root user runs the test
  selftests: ir: skip when lirc device doesn't exist.
  selftests: ir: fix warning: "%s" directive output may be truncated ’ directive output may be truncated
  selftests/seccomp: Actually sleep for 1/10th second
  selftests/harness: Update named initializer syntax
  selftests: unshare userns in seccomp pidns testcases
  selftests: set NO_NEW_PRIVS bit in seccomp user tests
  selftests: skip seccomp get_metadata test if not real root
  selftest: include stdio.h in kselftest.h
  selftests: fix typo in seccomp_bpf.c
  selftests: don't kill child immediately in get_metadata() test

Pull gcc-plugins updates from Kees Cook:
 "This adds additional type coverage to the existing structleak plugin
  and adds a large set of selftests to help evaluate stack variable
  zero-initialization coverage.

  That can be used to test whatever instrumentation might be performing
  zero-initialization: either with the structleak plugin or with Clang's
  coming "-ftrivial-auto-var-init=zero" option.

  Summary:

   - Add scalar and array initialization coverage

   - Refactor Kconfig to make options more clear

   - Add self-test module for testing automatic initialization"

* tag 'gcc-plugins-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  lib: Introduce test_stackinit module
  gcc-plugins: structleak: Generalize to all variable types

Pull pstore cleanups from Kees Cook:

 - Remove some needless memory allocations (Yue Hu, Kees Cook)

 - Add zero-length checks to avoid no-op calls (Yue Hu)

* tag 'pstore-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Avoid needless alloc during header write
  pstore/ram: Add kmsg hlen zero check to ramoops_pstore_write()
  pstore/ram: Move initialization earlier
  pstore: Avoid writing records with zero size
  pstore/ram: Replace dummy_data heap memory with stack memory

Fixes: ("MAINTAINERS: Update from @linux.vnet.ibm.com to @linux.ibm.com")
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull io_uring IO interface from Jens Axboe:
 "Second attempt at adding the io_uring interface.

  Since the first one, we've added basic unit testing of the three
  system calls, that resides in liburing like the other unit tests that
  we have so far. It'll take a while to get full coverage of it, but
  we're working towards it. I've also added two basic test programs to
  tools/io_uring. One uses the raw interface and has support for all the
  various features that io_uring supports outside of standard IO, like
  fixed files, fixed IO buffers, and polled IO. The other uses the
  liburing API, and is a simplified version of cp(1).

  This adds support for a new IO interface, io_uring.

  io_uring allows an application to communicate with the kernel through
  two rings, the submission queue (SQ) and completion queue (CQ) ring.
  This allows for very efficient handling of IOs, see the v5 posting for
  some basic numbers:

    https://lore.kernel.org/linux-block/20190116175003.17880-1-axboe@kernel.dk/

  Outside of just efficiency, the interface is also flexible and
  extendable, and allows for future use cases like the upcoming NVMe
  key-value store API, networked IO, and so on. It also supports async
  buffered IO, something that we've always failed to support in the
  kernel.

  Outside of basic IO features, it supports async polled IO as well.
  This particular feature has already been tested at Facebook months ago
  for flash storage boxes, with 25-33% improvements. It makes polled IO
  actually useful for real world use cases, where even basic flash sees
  a nice win in terms of efficiency, latency, and performance. These
  boxes were IOPS bound before, now they are not.

  This series adds three new system calls. One for setting up an
  io_uring instance (io_uring_setup(2)), one for submitting/completing
  IO (io_uring_enter(2)), and one for aux functions like registrating
  file sets, buffers, etc (io_uring_register(2)). Through the help of
  Arnd, I've coordinated the syscall numbers so merge on that front
  should be painless.

  Jon did a writeup of the interface a while back, which (except for
  minor details that have been tweaked) is still accurate. Find that
  here:

    https://lwn.net/Articles/776703/

  Huge thanks to Al Viro for helping getting the reference cycle code
  correct, and to Jann Horn for his extensive reviews focused on both
  security and bugs in general.

  There's a userspace library that provides basic functionality for
  applications that don't need or want to care about how to fiddle with
  the rings directly. It has helpers to allow applications to easily set
  up an io_uring instance, and submit/complete IO through it without
  knowing about the intricacies of the rings. It also includes man pages
  (thanks to Jeff Moyer), and will continue to grow support helper
  functions and features as time progresses. Find it here:

    git://git.kernel.dk/liburing

  Fio has full support for the raw interface, both in the form of an IO
  engine (io_uring), but also with a small test application (t/io_uring)
  that can exercise and benchmark the interface"

* tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block:
  io_uring: add a few test tools
  io_uring: allow workqueue item to handle multiple buffered requests
  io_uring: add support for IORING_OP_POLL
  io_uring: add io_kiocb ref count
  io_uring: add submission polling
  io_uring: add file set registration
  net: split out functions related to registering inflight socket files
  io_uring: add support for pre-mapped user IO buffers
  block: implement bio helper to add iter bvec pages to bio
  io_uring: batch io_kiocb allocation
  io_uring: use fget/fput_many() for file references
  fs: add fget_many() and fput_many()
  io_uring: support for IO polling
  io_uring: add fsync support
  Add io_uring IO interface

Pull block layer updates from Jens Axboe:
 "Not a huge amount of changes in this round, the biggest one is that we
  finally have Mings multi-page bvec support merged. Apart from that,
  this pull request contains:

   - Small series that avoids quiescing the queue for sysfs changes that
     match what we currently have (Aleksei)

   - Series of bcache fixes (via Coly)

   - Series of lightnvm fixes (via Mathias)

   - NVMe pull request from Christoph. Nothing major, just SPDX/license
     cleanups, RR mp policy (Hannes), and little fixes (Bart,
     Chaitanya).

   - BFQ series (Paolo)

   - Save blk-mq cpu -> hw queue mapping, removing a pointer indirection
     for the fast path (Jianchao)

   - fops->iopoll() added for async IO polling, this is a feature that
     the upcoming io_uring interface will use (Christoph, me)

   - Partition scan loop fixes (Dongli)

   - mtip32xx conversion from managed resource API (Christoph)

   - cdrom registration race fix (Guenter)

   - MD pull from Song, two minor fixes.

   - Various documentation fixes (Marcos)

   - Multi-page bvec feature. This brings a lot of nice improvements
     with it, like more efficient splitting, larger IOs can be supported
     without growing the bvec table size, and so on. (Ming)

   - Various little fixes to core and drivers"

* tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits)
  block: fix updating bio's front segment size
  block: Replace function name in string with __func__
  nbd: propagate genlmsg_reply return code
  floppy: remove set but not used variable 'q'
  null_blk: fix checking for REQ_FUA
  block: fix NULL pointer dereference in register_disk
  fs: fix guard_bio_eod to check for real EOD errors
  blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map
  block: optimize bvec iteration in bvec_iter_advance
  block: introduce mp_bvec_for_each_page() for iterating over page
  block: optimize blk_bio_segment_split for single-page bvec
  block: optimize __blk_segment_map_sg() for single-page bvec
  block: introduce bvec_nth_page()
  iomap: wire up the iopoll method
  block: add bio_set_polled() helper
  block: wire up block device iopoll method
  fs: add an iopoll method to struct file_operations
  loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()
  loop: do not print warn message if partition scan is successful
  block: bounce: make sure that bvec table is updated
  ...

Pull libata updates from Jens Axboe:
 "Pretty quiet round: a few small fixes, comment typo, and most notably
  a low level driver for the PATA Buddha controller"

* tag 'for-5.1/libata-20190301' of git://git.kernel.dk/linux-block:
  ata: libahci: Only warn for AHCI_HFLAG_MULTI_MSI set when genuine custom irq handler implemented
  libata: fix a typo in comment
  ata: macio: Use of_node_name_eq for node name comparisons
  ata: pata_samsung_cf: simplify getting .driver_data
  ata: pata_platform: Add IRQF_SHARED to IRQ flags
  ata: pata_of_platform: Allow to use 16-bit wide data transfer
  ata: add Buddha PATA controller driver

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v5.1 cycle:

  Core changes:

   - The big change this time around is the irqchip handling in the
     qualcomm pin controllers, closely coupled with the gpiochip. This
     rework, in a classic fall-between-the-chairs fashion has been
     sidestepped for too long.

     The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms
     have been rewritten to use hierarchical irqchip. This creates the
     base from which I intend to gradually pull support for hierarchical
     irqchips into the gpiolib irqchip helpers to cut down on duplicate
     code.

     We have too many hacks in the kernel because people have been
     working around the missing hierarchical irqchip for years, and once
     it was there, noone understood it for a while. We are now slowly
     adapting to using it.

     This is why this pull requests include changes to MFD, SPMI,
     IRQchip core and some ARM Device Trees pertaining to the Qualcomm
     chip family. Since Qualcomm have so many chips and such large
     deployments it is paramount that this platform gets this right, and
     now it (hopefully) does.

   - Core support for pull-up and pull-down configuration, also from the
     device tree. When a simple GPIO chip supports an "off or on" pull-up
     or pull-down resistor, we provide a way to set this up using
     machine descriptors or device tree.

     If more elaborate control of pull up/down (such as resistance shunt
     setting) is required, drivers should be phased over to use pin
     control. We do not yet provide a userspace ABI for this pull
     up-down setting but I suspect the makers are going to ask for it
     soon enough. PCA953x is the first user of this new API.

   - The GPIO mockup driver has been revamped after some discussion
     improving the IRQ simulator in the process.

     The idea is to make it possible to use the mockup for both testing
     and virtual prototyping, e.g. when you do not yet have a GPIO
     expander to play with but really want to get something to develop
     code around before hardware is available. It's neat. The blackbox
     testing usecase is currently making its way into kernelci.

   - ACPI GPIO core preserves non direction flags when updating flags.

   - A new device core helper for devm_platform_ioremap_resource() is
     funneled through the GPIO tree with Greg's ACK.

  New drivers:

   - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O)

   - Gateworks PLD GPIO driver (vaccumed up from OpenWrt)

   - AMD G-Series PCH (Platform Controller Hub) GPIO driver.

   - Fintek F81804 & F81966 subvariants.

   - PCA953x now supports NXP PCAL6416.

  Driver improvements:

   - IRQ support on the Nintendo Wii (Hollywood) GPIO.

   - get_direction() support for the MVEBU driver.

   - Set the right output level on SAMA5D2.

   - Drop the unused irq trigger setting on the Spreadtrum driver.

   - Wakeup support for PCA953x.

   - A slew of cleanups in the various Intel drivers"

* tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits)
  gpio: gpio-omap: fix level interrupt idling
  gpio: amd-fch: Set proper output level for direction_output
  x86: apuv2: remove unused variable
  gpio: pca953x: Use PCA_LATCH_INT
  platform/x86: fix PCENGINES_APU2 Kconfig warning
  gpio: pca953x: Fix dereference of irq data in shutdown
  gpio: amd-fch: Fix type error found by sparse
  gpio: amd-fch: Drop const from resource
  gpio: mxc: add check to return defer probe if clock tree NOT ready
  gpio: ftgpio: Register per-instance irqchip
  gpio: ixp4xx: Add DT bindings
  x86: pcengines apuv2 gpio/leds/keys platform driver
  gpio: AMD G-Series PCH gpio driver
  drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()
  gpio: tqmx86: Set proper output level for direction_output
  gpio: sprd: Change to use SoC compatible string
  gpio: sprd: Use SoC compatible string instead of wildcard string
  gpio: of: Handle both enable-gpio{,s}
  gpio: of: Restrict enable-gpio quirk to regulator-gpio
  gpio: davinci: use devm_platform_ioremap_resource()
  ...

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add STMPE ADC Input driver
   - Add STMicroelectronics STPMIC1 Parent driver
   - Add STMicroelectronics STPMIC1 OnKey Misc driver
   - Add STMicroelectronics STPMIC1 Watchdog driver
   - Add Cirrus Logic Lochnagar Parent driver
   - Add TQ-Systems TQMX86 Parent driver

  New Device Support:
   - Add support for ADC to STMPE

  New (or moved) Functionality:
   - Move Lightbar functionality to its own driver; cros_ec_lightbar
   - Move VBC functionality to its own driver; cros_ec_vbc
   - Move VBC functionality to its own driver; cros_ec_vbc
   - Move DebugFS functionality to its own driver; cros_ec_debugfs
   - Move SYSFS functionality to its own driver; cros_ec_sysfs
   - Add support for input voltage options; tps65218

  Fixes:
   - Use devm_* managed resources; cros_ec
   - Device Tree documentation; stmpe, aspeed-lpc, lochnagar
   - Trivial Clean-ups; stmpe
   - Rip out broken modular code; aat2870-core, adp5520, as3711,
         db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd,
	 syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi,
	 wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core
   - Kconfig fixups; INTEL_SOC_PMIC
   - Improve error path; sm501, sec-core
   - Use struct_size() helper; sm501
   - Constify; at91-usart
   - Use pointers instead of copying data; at91-usart
   - Deliver proper return value; cros_ec_dev
   - Trivial formatting/whitespace; sec-core"

* tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits)
  mfd: mxs-lradc: Mark expected switch fall-through
  mfd: sec-core: Cleanup formatting to a consistent style
  mfd: tqmx86: IO controller with I2C, Wachdog and GPIO
  mfd: intel-lpss: Move linux/pm.h to the local header
  mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM
  mfd: tps68470: Drop unused MODULE_DEVICE_TABLE
  mfd: at91-usart: No need to copy mfd_cell in probe
  mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev
  mfd: lochnagar: Add support for the Cirrus Logic Lochnagar
  mfd: lochnagar: Add initial binding documentation
  dt-bindings: mfd: aspeed-lpc: Make parameter optional
  mfd: sec-core: Return gracefully instead of BUG() if device cannot match
  mfd: sm501: Use struct_size() in devm_kzalloc()
  mfd: sm501: Fix potential NULL pointer dereference
  mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies
  mfd: tps65218.c: Add input voltage options
  mfd: wm8400-core: Make it explicitly non-modular
  mfd: wm8350-core: Drop unused module infrastructure from non-modular code
  mfd: wm8350-i2c: Make it explicitly non-modular
  mfd: wm831x-core: Drop unused module infrastructure from non-modular code
  ...

Pull backlight fixlet from Lee Jones:
 "Allow GPIO call to sleep in pwm_bl driver"

* tag 'backlight-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Use gpiod_get_value_cansleep() to get initial state

Pull RTC updates from Alexandre Belloni:
 "There is an unusual amount of new drivers this cycle, and this
  explains the number of insertions.

  Other than that, the changes are the usual fixes and feature addition.

  Subsystem updates:
   - new quartz-load-femtofarads DT property for quartz load capacitance
   - remove rtc_class_ops.read_callback

  New drivers:
   - Abracon AB-RTCMC-32.768kHz-EOZ9
   - Amlogic Meson RTC
   - Cadence RTC IP
   - Microcrystal RV3028
   - Whwave sd3078

  Driver updates:
   - cmos: ignore bogus century byte
   - ds1307: rework rx8130 support
   - isl1208: add isl1209 support, nvmem support
   - rs5C372: report invalid time when the oscillator stopped
   - rx8581: add rx8571 support"

* tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (66 commits)
  rtc: pic32: convert to SPDX identifier
  rtc: pic32: let the core handle range
  rtc: pic32: convert to devm_rtc_allocate_device
  rtc: update my email address
  rtc: rv8803: convert to SPDX identifier
  rtc: rv8803: let the core handle range
  rtc: tx4939: convert to SPDX identifier
  rtc: tx4939: use .set_time
  rtc: tx4939: switch to rtc_time64_to_tm/rtc_tm_to_time64
  rtc: tx4939: set range
  rtc: tx4939: remove useless test
  rtc: zynqmp: let the core handle range
  rtc: zynqmp: fix possible race condition
  rtc: imx-sc: use rtc_time64_to_tm
  rtc: rx8581: Add support for Epson rx8571 RTC
  dt-bindings: rtc: add rx8571 compatible
  rtc: pcf85063: remove dead code
  rtc: remove rtc_class_ops.read_callback
  rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support
  dt-bindings: rtc: add ABEOZ9
  ...

Pull thermal soc updates from Eduardo Valentin:
 "Specifics:

   - mediatek thermal now supports MT8183

   - broadcom thermal now supports Stingray

   - qoirq now supports multiple sensors

   - fixes on different drivers: rcar, tsens, tegra

  Some new drivers are still pending further review and I chose to leave
  them for the next merge window while still sending this material"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: rcar_gen3_thermal: Register hwmon sysfs interface
  thermal/qcom/tsens-common : fix possible object reference leak
  thermal: tegra: add get_trend ops
  thermal: tegra: fix memory allocation
  thermal: tegra: remove unnecessary warnings
  thermal: mediatek: add support for MT8183
  dt-bindings: thermal: add binding document for mt8183 thermal controller
  thermal: mediatek: add flag for bank selection
  thermal: mediatek: add thermal controller offset
  thermal: mediatek: add calibration item
  thermal: mediatek: add common index of vts settings.
  thermal: mediatek: fix register index error
  thermal: qoriq: add multiple sensors support
  thermal: broadcom: Add Stingray thermal driver
  dt-bindings: thermal: Add binding document for SR thermal

Pull ibft updates from Konrad Rzeszutek Wilk:
 "Two tiny fixes - a missing break, and upgrading the subsystem to use
  modern macros"

* 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
  iscsi_ibft: use virt_to_phys instead of isa_virt_to_bus
  iscsi_ibft: Fix missing break in switch statement

Pull swiotlb updates from Konrad Rzeszutek Wilk:
 "Expands the SWIOTLB to have debugfs support (along with bug-fixes),
  and a tiny fix"

* 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: drop pointless static qualifier in swiotlb_create_debugfs()
  swiotlb: checking whether swiotlb buffer is full with io_tlb_used
  swiotlb: add debugfs to track swiotlb buffer usage
  swiotlb: fix comment on swiotlb_bounce()

Pull i2c updates from Wolfram Sang:

 - the I2C core gained helpers to assist drivers in handling their
   suspended state, and drivers were converted to use it

 - two new fault-injectors for stress-testing

 - bigger refactoring and feature improvements for the ocores,
   sh_mobile, and tegra drivers

 - platform_data removal for the at24 EEPROM driver

 - ... and various improvements and bugfixes all over the subsystem

* 'i2c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
  i2c: Allow recovery of the initial IRQ by an I2C client device.
  i2c: ocores: turn incomplete kdoc into a comment
  i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
  i2c: tegra: Only display error messages if DMA setup fails
  i2c: gpio: fault-injector: add 'inject_panic' injector
  i2c: gpio: fault-injector: add 'lose_arbitration' injector
  i2c: tegra: remove multi-master support
  i2c: tegra: remove master fifo support on tegra186
  i2c: tegra: change phrasing, "fallbacking" to "falling back"
  i2c: expand minor range when registering chrdev region
  i2c: aspeed: Add multi-master use case support
  i2c: core-smbus: don't trace smbus_reply data on errors
  i2c: ocores: Add support for bus clock via platform data
  i2c: ocores: Add support for IO mapper registers.
  i2c: ocores: checkpatch fixes
  i2c: ocores: add SPDX tag
  i2c: ocores: add polling interface
  i2c: ocores: do not handle IRQ if IF is not set
  i2c: ocores: stop transfer on timeout
  i2c: tegra: add i2c interface timing support
  ...

Pull power supply and reset updates from Sebastian Reichel:
 "Nothing too fancy in the power-supply subsystem this time. There are
  less patches than usual, since I did not have enough time to review
  them in time. The good news is, that all patches have been in
  linux-next for more than two weeks and there are no complicated
  cross-subsystem patchsets this time!

  Summary:

   - at91-reset: add sam9x60 support

   - sc27xx: improve capacity logic

   - goldfish_battery: enhance driver by adding many new properties

   - isp1704: drop platform data and migrate to gpiod

   - misc small fixes and improvements"

* tag 'for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (25 commits)
  power: reset: at91-reset: add support for sam9x60 SoC
  dt-bindings: arm: atmel: add new sam9x60 reset controller binding
  dt-bindings: arm: atmel: add missing samx7 to reset controller
  max17042_battery: fix potential use-after-free on device remove
  power: supply: core: Add a field to support battery max voltage
  dt-bindings: power: supply: Add voltage-max-design-microvolt property
  bq27x00: use cached flags
  power: supply: ds2782: fix possible use-after-free on remove
  power: supply: bq25890: show max charge current/voltage as configured
  power: supply: sc27xx: Fix capacity saving function
  power: supply: sc27xx: Fix the incorrect formula when converting capacity to coulomb counter
  power: supply: sc27xx: Add one property to read charge voltage
  dt-bindings: power: sc27xx: Add one IIO channel to read charge voltage
  drivers: power: supply: goldfish_battery: Add support for reading more properties
  power: supply: charger-manager: Fix trivial language typos
  cpcap-charger: generate events for userspace
  power: supply: remove some duplicated includes
  power: twl4030: fix a missing check of return value
  drivers: power: supply: goldfish_battery: Use tabs for alignment
  drivers: power: supply: goldfish_battery: Fix alignment
  ...

Pull HIS update from Sebastian Reichel:
 "Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE"

* tag 'hsi-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: omap_ssi_port: fix debugfs_simple_attr.cocci warnings

Pull IPMI updates from Corey Minyard:
 "A couple of bug fixes and a bunch of code cleanup:

   - Fix a use after free error in a certain error situation.

   - Fix some flag handling issues in the SSIF (I2C) IPMI driver.

   - A bunch of cleanups, spacing issues, converting pr_xxx to dev_xxx,
     use standard UUID handling, and some other minor stuff.

   - The IPMI code was creating a platform device if none was supplied.
     Instead of doing that, have every source that creates an IPMI
     device supply a device struct. This fixes several issues,including
     a crash in one situation, and cleans things up a bit"

* tag 'for-linus-5.1' of git://github.com/cminyard/linux-ipmi:
  ipmi_si: Potential array underflow in hotmod_handler()
  ipmi_si: Remove hacks for adding a dummy platform devices
  ipmi_si: Consolidate scanning the platform bus
  ipmi_si: Remove hotmod devices on removal and exit
  ipmi_si: Remove hardcode IPMI devices by scanning the platform bus
  ipmi_si: Switch hotmod to use a platform device
  ipmi: Consolidate the adding of platform devices
  ipmi_si: Rename addr_type to addr_space to match what it does
  ipmi_si: Convert some types into unsigned
  ipmi_si: Fix crash when using hard-coded device
  ipmi: Use dedicated API for copying a UUID
  ipmi: Use defined constant for UUID representation
  ipmi:ssif: Change some pr_xxx to dev_xxx calls
  ipmi: kcs_bmc: handle devm_kasprintf() failure case
  ipmi: Fix return value when a message is truncated
  ipmi: clean an indentation issue, remove extraneous space
  ipmi: Make the smi watcher be disabled immediately when not needed
  ipmi: Fix how the lower layers are told to watch for messages
  ipmi: Fix SSIF flag requests
  ipmi_si: fix use-after-free of resource->name

Pull RAS updates from Borislav Petkov:
 "This time around we have in store:

   - Disable MC4_MISC thresholding banks on all AMD family 0x15 models
     (Shirish S)

   - AMD MCE error descriptions update and error decode improvements
     (Yazen Ghannam)

   - The usual smaller conversions and fixes"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Improve error message when kernel cannot recover, p2
  EDAC/mce_amd: Decode MCA_STATUS in bit definition order
  EDAC/mce_amd: Decode MCA_STATUS[Scrub] bit
  EDAC, mce_amd: Print ExtErrorCode and description on a single line
  EDAC, mce_amd: Match error descriptions to latest documentation
  x86/MCE/AMD, EDAC/mce_amd: Add new error descriptions for some SMCA bank types
  x86/MCE/AMD, EDAC/mce_amd: Add new McaTypes for CS, PSP, and SMU units
  x86/MCE/AMD, EDAC/mce_amd: Add new MP5, NBIO, and PCIE SMCA bank types
  RAS: Add a MAINTAINERS entry
  RAS: Use consistent types for UUIDs
  x86/MCE/AMD: Carve out the MC4_MISC thresholding quirk
  x86/MCE/AMD: Turn off MC4_MISC thresholding on all family 0x15 models
  x86/MCE: Switch to use the new generic UUID API

Pull EDAC updates from Borislav Petkov:

 - A new EDAC AST 2500 SoC driver (Stefan M Schaeckeler)

 - New i10nm EDAC driver for Intel 10nm CPUs (Qiuxu Zhuo and Tony Luck)

 - Altera SDRAM functionality carveout for separate enablement of RAS
   and SDRAM capabilities on some Altera chips. (Thor Thayer)

 - The usual round of cleanups and fixes

And last but not least: recruit James Morse as a reviewer for the ARM
side.

* tag 'edac_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC/altera: Add separate SDRAM EDAC config
  EDAC, altera: Add missing of_node_put()
  EDAC, skx_common: Add code to recognise new compound error code
  EDAC, i10nm: Fix randconfig builds
  EDAC, i10nm: Add a driver for Intel 10nm server processors
  EDAC, skx_edac: Delete duplicated code
  EDAC, skx_common: Separate common code out from skx_edac
  EDAC: Do not check return value of debugfs_create() functions
  EDAC: Add James Morse as a reviewer
  dt-bindings, EDAC: Add Aspeed AST2500
  EDAC, aspeed: Add an Aspeed AST2500 EDAC driver

Pull HID updates from Jiri Kosina:

 - support for Pro Pen slim, from Jason Gerecke

 - power management improvements to Intel-ISH driver, from Song Hongyan

 - UCLogic driver revamp in order to be able to support wider range of
   Huion tablets, from Nikolai Kondrashov

 - Asus Transbook support, from NOGUCHI Hiroshi

 - other assorted small bugfixes / cleanups and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (46 commits)
  HID: Remove Waltop tablets from hid_have_special_driver
  HID: Remove KYE tablets from hid_have_special_driver
  HID: Remove hid-uclogic entries from hid_have_special_driver
  HID: uclogic: Do not initialize non-USB devices
  HID: uclogic: Add support for Ugee G5
  HID: uclogic: Support Gray-coded rotary encoders
  HID: uclogic: Support faking Wacom pad device ID
  HID: uclogic: Add support for XP-Pen Deco 01
  HID: uclogic: Add support for XP-Pen Star G640
  HID: uclogic: Add support for XP-Pen Star G540
  HID: uclogic: Add support for Ugee EX07S frame controls
  HID: uclogic: Add support for Ugee M540
  HID: uclogic: Add support for Ugee 2150
  HID: uclogic: Support v2 protocol
  HID: uclogic: Support fragmented high-res reports
  HID: uclogic: Support in-range reporting emulation
  HID: uclogic: Designate current protocol v1
  HID: uclogic: Re-initialize tablets on resume
  HID: uclogic: Extract tablet parameter discovery into a module
  HID: uclogic: Extract report descriptors to a module
  ...

Pull livepatching updates from Jiri Kosina:

 - support for something we call 'atomic replace', and allows for much
   better handling of cumulative patches (which is something very useful
   for distros), from Jason Baron with help of Petr Mladek and Joe
   Lawrence

 - improvement of handling of tasks blocking finalization, from Miroslav
   Benes

 - update of MAINTAINERS file to reflect move towards group
   maintainership

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits)
  livepatch/selftests: use "$@" to preserve argument list
  livepatch: Module coming and going callbacks can proceed with all listed patches
  livepatch: Proper error handling in the shadow variables selftest
  livepatch: return -ENOMEM on ptr_id() allocation failure
  livepatch: Introduce klp_for_each_patch macro
  livepatch: core: Return EOPNOTSUPP instead of ENOSYS
  selftests/livepatch: add DYNAMIC_DEBUG config dependency
  livepatch: samples: non static warnings fix
  livepatch: update MAINTAINERS
  livepatch: Remove signal sysfs attribute
  livepatch: Send a fake signal periodically
  selftests/livepatch: introduce tests
  livepatch: Remove ordering (stacking) of the livepatches
  livepatch: Atomic replace and cumulative patches documentation
  livepatch: Remove Nop structures when unused
  livepatch: Add atomic replace
  livepatch: Use lists to manage patches, objects and functions
  livepatch: Simplify API by removing registration step
  livepatch: Don't block the removal of patches loaded after a forced transition
  livepatch: Consolidate klp_free functions
  ...

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for the 5.1 merge window.

  The big changes I'd highlight are:
   - nouveau has HMM support now, there is finally an in-tree user so we
     can quieten down the rip it out people.
   - i915 now enables fastboot by default on Skylake+
   - Displayport Multistream support has been refactored and should
     hopefully be more reliable.

  Core:
   - header cleanups aiming towards removing drmP.h
   - dma-buf fence seqnos to 64-bits
   - common helper for DP mst hotplug for radeon,i915,amdgpu + new
     refcounting scheme
   - MST i2c improvements
   - drm_syncobj_cb removal
   - ARM FB compression fourcc
   - P010 + P016 fourcc
   - allwinner tiled format modifier
   - i2c over aux I2C_M_STOP support
   - DRM_AUTH handling fixes

  TTM:
   - ref/unref renaming

  New driver:
   - ARM komeda display driver

  scheduler:
   - refactor mirror list handling
   - rework hw fence processing
   - 0 run queue entity fix

  bridge:
   - TI DS90C185 LVDS bridge
   - thc631lvdm83d bridge improvements
   - cadence + allwinner DSI ported to generic phy

  panels:
   - Sitronix ST7701 panel
   - Kingdisplay KD097D04
   - LeMaker BL035-RGB-002
   - PDA 91-00156-A0
   - Innolux EE101IA-01D

  i915:
   - Enable fastboot by default on SKL+/VLV/CHV
   - Export RPCS configuration for ICL media driver
   - Coffelake PCI ID
   - CNL clocks setup fixes
   - ACPI/PMIC support for MIPI/DSI
   - Per-engine WA init for all engines
   - Shrinker locking fixes
   - Kerneldoc updates
   - Lots of ring improvements and reset fixes
   - Coffeelake GVT Support
   - VFIO GVT EDID Region support
   - runtime PM wakeref tracking
   - ILK->IVB primary plane enable delays
   - userptr mutex locking fixes
   - DSI fixes
   - LVDS/TV cleanups
   - HW readout fixes
   - LUT robustness fixes
   - ICL display and watermark fixes
   - gem mmap race fix

  amdgpu:
   - add scheduled dependencies interface
   - DCC on scanout surfaces
   - vega10/20 BACO support
   - Multiple IH rings on soc15
   - XGMI locking fixes
   - DC i2c/aux cleanups
   - runtime SMU debug interface
   - Kexec improvmeents
   - SR-IOV fixes
   - DC freesync + ABM fixes
   - GDS fixes
   - GPUVM fixes
   - vega20 PCIE DPM switching fixes
   - Context priority handling fixes

  radeon:
   - fix missing break in evergreen parser

  nouveau:
   - SVM support via HMM

  msm:
   - QCOM Compressed modifier support

  exynos:
   - s5pv210 rotator support

  imx:
   - zpos property support
   - pending update fixes

  v3d:
   - cache flush improvments

  vc4:
   - reflection support
   - HDMI overscan support

  tegra:
   - CEC refactoring
   - HDMI audio fixes
   - Tegra186 prep work
   - SOR crossbar device tree fixes

  sun4i:
   - implicit fencing support
   - YUV and scalar support improvements
   - A23 support
   - tiling fixes

  atmel-hlcdc:
   - clipping and rotation property fixes

  qxl:
   - BO and PRIME improvements
   - generic fbdev emulation

  dw-hdmi:
   - HDMI 2.0 2160p
   - YUV420 ouput

  rockchip:
   - implicit fencing support
   - reflection proerties

  virtio-gpu:
   - use generic fbdev emulation

  tilcdc:
   - cpufreq vs crtc init fix

  rcar-du:
   - R8A774C0 support
   - D3/E3 RGB output routing fixes and DPAD0 support
   - RA87744 LVDS support

  bochs:
   - atomic and generic fbdev emulation
   - ID mismatch error on bochs load

  meson:
   - remove firmware fbs"

* tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits)
  drm/amd/display: Use vrr friendly pageflip throttling in DC.
  drm/imx: only send commit done event when all state has been applied
  drm/imx: allow building under COMPILE_TEST
  drm/imx: imx-tve: depend on COMMON_CLK
  drm/imx: ipuv3-plane: add zpos property
  drm/imx: ipuv3-plane: add function to query atomic update status
  gpu: ipu-v3: prg: add function to get channel configure status
  gpu: ipu-v3: pre: add double buffer status readback
  drm/amdgpu: Bump amdgpu version for context priority override.
  drm/amdgpu/powerplay: fix typo in BACO header guards
  drm/amdgpu/powerplay: fix return codes in BACO code
  drm/amdgpu: add missing license on baco files
  drm/bochs: Fix the ID mismatch error
  drm/nouveau/dmem: use dma addresses during migration copies
  drm/nouveau/dmem: use physical vram addresses during migration copies
  drm/nouveau/dmem: extend copy function to allow direct use of physical addresses
  drm/nouveau/svm: new ioctl to migrate process memory to GPU memory
  drm/nouveau/dmem: device memory helpers for SVM
  drm/nouveau/svm: initial support for shared virtual memory
  drm/nouveau: prepare for enabling svm with existing userspace interfaces
  ...

Mark Syms has reported seeing tasks that are stuck waiting in
find_insert_glock.  It turns out that struct lm_lockname contains four padding
bytes on 64-bit architectures that function glock_waitqueue doesn't skip when
hashing the glock name.  As a result, we can end up waking up the wrong
waitqueue, and the waiting tasks may be stuck forever.

Fix that by using ht_parms.key_len instead of sizeof(struct lm_lockname) for
the key length.
Reported-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Tony notes that the GPIO module does not idle when level interrupts are
in use, as the wakeup appears to get stuck.

After extensive investigation, it appears that the wakeup will only be
cleared if the interrupt status register is cleared while the interrupt
is enabled. However, we are currently clearing it with the interrupt
disabled for level-based interrupts.

It is acknowledged that this observed behaviour conflicts with a
statement in the TRM:

CAUTION
  After servicing the interrupt, the status bit in the interrupt status
  register (GPIOi.GPIO_IRQSTATUS_0 or GPIOi.GPIO_IRQSTATUS_1) must be
  reset and the interrupt line released (by setting the corresponding
  bit of the interrupt status register to 1) before enabling an
  interrupt for the GPIO channel in the interrupt-enable register
  (GPIOi.GPIO_IRQSTATUS_SET_0 or GPIOi.GPIO_IRQSTATUS_SET_1) to prevent
  the occurrence of unexpected interrupts when enabling an interrupt
  for the GPIO channel.

However, this does not appear to be a practical problem.

Further, as reported by Grygorii Strashko <grygorii.strashko@ti.com>,
the TI Android kernel tree has an earlier similar patch as "GPIO: OMAP:
Fix the sequence to clear the IRQ status" saying:

 if the status is cleared after disabling the IRQ then sWAKEUP will not
 be cleared and gates the module transition

When we unmask the level interrupt after the interrupt has been handled,
enable the interrupt and only then clear the interrupt. If the interrupt
is still pending, the hardware will re-assert the interrupt status.

Should the caution note in the TRM prove to be a problem, we could
use a clear-enable-clear sequence instead.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[tony@atomide.com: updated comments based on an earlier TI patch]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Current amd_fch_gpio_direction_output implementation ignores the value
argument, fix it so direction_output will set proper output level.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Enrico Weigelt <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The driver was newly introduced but the version that got merged
produces a harmless compiler warning:

drivers/platform/x86/pcengines-apuv2.c: In function 'apu_board_init':
drivers/platform/x86/pcengines-apuv2.c:211:6: error: unused variable 'rc' [-Werror=unused-variable]

Remove the evidently useless variable.

Fixes: f8eb0235 ("x86: pcengines apuv2 gpio/leds/keys platform driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-By: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The commit 0cdf21b3

  ("gpio: pca953x: set the PCA_PCAL flag also when matching by DT")

introduces a helper macro which tells that chip supports latched interrupts,
but the macro was never used for ACPI or legacy enumeration.

So, make use of it for legacy and ACPI enumeration.

Cc: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>