- 12 Aug, 2013 26 commits
-
-
Johan Hovold authored
commit d8a083cc upstream. Fix race in mos7840_get_reg which unconditionally manipulated the control urb (which may already be in use) by adding a control-urb busy flag. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
commit fc514460 upstream. Allocate a descriptor for each period of a cyclic transfer, not just the first. Also since the callback needs to be called for each finished period make sure to initialize the callback and callback_param fields of each descriptor in a cyclic transfer. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Uwe Kleine-König authored
commit 079a036f upstream. Without this patch the driver waits ~1 ms for the UART to become idle. At 115200n8 this time is (theoretically) enough to transfer 11.5 characters (= 115200 bits/s / (10 Bits/char) * 1ms). As the mxs-auart has a fifo size of 16 characters the clock is gated too early. The problem is worse for lower baud rates. This only happens to really shut down the transmitter in the middle of a transfer if /dev/ttyAPPx isn't opened in userspace (e.g. by a getty) but was at least once (because the bootloader doesn't disable the transmitter). So increase the timeout to 20 ms which should be enough for 9600n8, too. Moreover skip gating the clock if the timeout is elapsed. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Axel Lin authored
commit d5a12ea7 upstream. Platform drivers use "platform:" prefix in module alias. Also use DRIVER_NAME in MODULE_ALIAS to make module autoloading work. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Uwe Kleine-König authored
commit d970d7fe upstream. The handler needs to ack the pending events before actually handling them. Otherwise a new event might come in after it it considered non-pending or handled and is acked then without being handled. So this event is only noticed when the next interrupt happens. Without this patch an i.MX28 based machine running an rt-patched kernel regularly hangs during boot. Signed-off-by:
-
Vinod Koul authored
commit a8d30608 upstream. the return value of SNDRV_COMPRESS_VERSION always return default -ENOTTY as the return value was never updated for this call assign return value from put_user() Reported-by:
Haynes <hgeorge@codeaurora.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 697aebab upstream. A fixup for Apple Mac Mini was lost during the adaption to the generic parser because the fallback for the generic ID 8384:7680 was dropped, and it resulted in the silence output (and maybe other problems). Unfortunately, just adding the missing subsystem ID wasn't enough, in this case. The subsystem ID of this machine is 0000:0100 (what Apple thought...?), and since snd_hda_pick_fixup() doesn't take the vendor id zero into account, the driver ignored this entry. Now it's fixed to regard the vendor id zero as a valid value. Reported-and-tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vivien Didelot authored
commit 5c52add1 upstream. Without this patch, the values for ideality (register 0x4b) and ideality selection mask (register 0x4c) are inverted. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Thomas Bogendoerfer authored
commit dd5e6d6a upstream. We can't use dev->mod_index for selecting the interrupt routing entry, because it's not an index into interrupt routing table. It will be even wrong on a machine with 2 CPUs (4 cores). But all needed information is contained in the PAT entries for the serial ports. mod[0] contains the iosapic address and mod_info has some indications for the interrupt input (at least it looks like it). This patch implements the searching for the right iosapic and uses this interrupt input information. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
John David Anglin authored
commit 50861f5a upstream. The parisc architecture does not have a pte special bit. As a result, special mappings are handled with the VM_PFNMAP and VM_MIXEDMAP flags. VM_MIXEDMAP mappings may or may not have a "struct page" backing. When pfn_valid() is false, there is no "struct page" backing. Otherwise, they are treated as normal pages. The FireGL driver uses the VM_MIXEDMAP without a backing "struct page". This treatment caused a panic due to a TLB data miss in update_mmu_cache. This appeared to be in the code generated for page_address(). We were in fact using a very circular bit of code to determine the physical address of the PFN in various cache routines. This wasn't valid when there was no "struct page" backing. The needed address can in fact be determined simply from the PFN itself without using the "struct page". The attached patch updates update_mmu_cache(), flush_cache_mm(), flush_cache_range() and flush_cache_page() to check pfn_valid() and to directly compute the PFN physical and virtual addresses. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
-
Alex Ivanov authored
commit 06f0cce4 upstream. Allow binding of user memory to the AGP GART on systems with HP Quicksilver AGP bus. This resolves 'bind memory failed' error seen in dmesg: [29.365973] [TTM] AGP Bind memory failed. … [29.367030] [drm] Forcing AGP to PCI mode The system doesn't more fail to bind the memory, and hence not falling back to the PCI mode (if other failures aren't detected). This is just a simple write down from the following patches: agp/amd-k7: Allow binding user memory to the AGP GART agp/hp-agp: Allow binding user memory to the AGP GART Signed-off-by:
Alex Ivanov <gnidorah@p0n4ik.tk> Signed-off-by:
-
Robert Jennings authored
commit 3be7db6a upstream. When an associativity level change is found for one thread, the siblings threads need to be updated as well. This is done today for PRRN in stage_topology_update() but is missing for VPHN in update_cpu_associativity_changes_mask(). This patch will correctly update all thread siblings during a topology change. Without this patch a topology update can result in a CPU in init_sched_groups_power() getting stuck indefinitely in a loop. This loop is built in build_sched_groups(). As a result of the thread moving to a node separate from its siblings the struct sched_group will have its next pointer set to point to itself rather than the sched_group struct of the next thread. This happens because we have a domain without the SD_OVERLAP flag, which is correct, and a topology that doesn't conform with reality (threads on the same core assigned to different numa nodes). When this list is traversed by init_sched_groups_power() it will reach the thread's sched_group structure and loop indefinitely; the cpu will be stuck at this point. The bug was exposed when VPHN was enabled in commit b7abef04 (v3.9). Reported-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Will Deacon authored
commit acfdd4b1 upstream. a.out support on ARM requires that argc, argv and envp are passed in r0-r2 respectively, which requires hacking load_aout_binary to prevent argc being clobbered by the return code. Whilst mainline kernels do set the registers up in start_thread, the aout loader has never carried the hack in mainline. Initialising the registers in this way actually goes against the libc expectations for ELF binaries, where argc, argv and envp are passed on the stack, with r0 being used to hold a pointer to an exit function for cleaning up after the dynamic linker if required. If the pointer is NULL, then it is ignored. When execing an ELF binary, Linux currently zeroes r0, then sets it to argc and then finally clobbers it with the return value of the execve syscall, so we actually end up with: r0 = 0 stack[0] = argc r1 = stack[1] = argv r2 = stack[2] = envp libc treats r1 and r2 as undefined. The clobbering of r0 by sys_execve works for user-spawned threads, but when executing an ELF binary from a kernel thread (via call_usermodehelper), the execve is performed on the ret_from_fork path, which restores r0 from the saved pt_regs, resulting in argc being presented to the C library. This has horrible consequences when the application exits, since we have an exit function registered using argc, resulting in a jump to hyperspace. This patch solves the problem by removing the partial a.out support from arch/arm/ altogether. Signed-off-by:
Will Deacon <will.deacon@arm.com> Cc: Ashish Sangwan <ashishsangwan2@gmail.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Catalin Marinas authored
commit bdae73cd upstream. As of commit b9d4d42a (ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on pre-ARMv6 CPUs), the mm switching on VIVT processors is done in the finish_arch_post_lock_switch() function to avoid whole cache flushing with interrupts disabled. The need for deferred mm switch is stored as a thread flag (TIF_SWITCH_MM). However, with preemption enabled, we can have another thread switch before finish_arch_post_lock_switch(). If the new thread has the same mm as the previous 'next' thread, the scheduler will not call switch_mm() and the TIF_SWITCH_MM flag won't be set for the new thread. This patch moves the switch pending flag to the mm_context_t structure since this is specific to the mm rather than thread. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
Marc Kleine-Budde <mkl@pengutronix.de> Tested-by:
-
Will Deacon authored
commit bf3f0f33 upstream. Commit ae8a8b95 ("ARM: 7691/1: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead") added early function returns for page table cache flushing operations on ARMv7 SMP CPUs. Unfortunately, when targetting Thumb-2, these `mov pc, lr' sequences assemble to 2 bytes which can lead to corruption of the instruction stream after code patching. This patch fixes the alternates to use wide (32-bit) instructions for Thumb-2, therefore ensuring that the patching code works correctly. Signed-off-by:
-
Aaro Koskinen authored
commit fe956a1d upstream. slots-fan on G5 Xserve is always running at full speed with windfarm_rm31 driver, resulting in a very high acoustic noise level. It seems the fan parameters are incorrect, and have been copied from the Drive Bay fan (RPM, not present on rm31) of the legacy therm_pm72 driver. This patch changes the parameters to match the Slots fan (PWM) of therm_pm72. With the patch, slots-fan speed drops from 99% to 19% during normal use, and slots-temp settle to ~42'C. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Russell King authored
commit 8c0cc8a5 upstream. Olof reports that noMMU builds error out with: arch/arm/kernel/signal.c: In function 'setup_return': arch/arm/kernel/signal.c:413:25: error: 'mm_context_t' has no member named 'sigpage' This shows one of the evilnesses of IS_ENABLED(). Get rid of it here and replace it with #ifdef's - and as no noMMU platform can make use of sigpage, depend on CONIFG_MMU not CONFIG_ARM_MPU. Reported-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Russell King authored
commit e0d40756 upstream. Unfortunately, I never committed the fix to a nasty oops which can occur as a result of that commit: ------------[ cut here ]------------ kernel BUG at /home/olof/work/batch/include/linux/mm.h:414! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 490 Comm: killall5 Not tainted 3.11.0-rc3-00288-gabe03080 #53 task: e90acac0 ti: e9be8000 task.ti: e9be8000 PC is at special_mapping_fault+0xa4/0xc4 LR is at __do_fault+0x68/0x48c This doesn't show up unless you do quite a bit of testing; a simple boot test does not do this, so all my nightly tests were passing fine. The reason for this is that install_special_mapping() expects the page array to stick around, and as this was only inserting one page which was stored on the kernel stack, that's why this was blowing up. Reported-by:
-
Russell King authored
commit a5463cd3 upstream. If kuser helpers are not provided by the kernel, disable user access to the vectors page. With the kuser helpers gone, there is no reason for this page to be visible to userspace. Signed-off-by:
-
Russell King authored
commit 48be69a0 upstream. Move the signal handlers into a VDSO page rather than keeping them in the vectors page. This allows us to place them randomly within this page, and also map the page at a random location within userspace further protecting these code fragments from ROP attacks. The new VDSO page is also poisoned in the same way as the vector page. Signed-off-by:
-
Russell King authored
commit f6f91b0d upstream. Provide a kernel configuration option to allow the kernel user helpers to be removed from the vector page, thereby preventing their use with ROP (return orientated programming) attacks. This option is only visible for CPU architectures which natively support all the operations which kernel user helpers would normally provide, and must be enabled with caution. Acked-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
-
Russell King authored
commit e39e3f3e upstream. FIQ should no longer copy the FIQ code into the user visible vector page. Instead, it should use the hidden page. This change makes that happen. Acked-by:
-
Russell King authored
commit b9b32bf7 upstream. Use linker magic to create the vectors and vector stubs: we can tell the linker to place them at an appropriate VMA, but keep the LMA within the kernel. This gets rid of some unnecessary symbol manipulation, and have the linker calculate the relocations appropriately. Acked-by:
-
Russell King authored
commit 19accfd3 upstream. Move the machine vector stubs into the page above the vector page, which we can prevent from being visible to userspace. Also move the reset stub, and place the swi vector at a location that the 'ldr' can get to it. This hides pointers into the kernel which could give valuable information to attackers, and reduces the number of exploitable instructions at a fixed address. Acked-by:
-
Russell King authored
commit 5b43e7a3 upstream. Poison the memory between each kuser helper. This ensures that any branch between the kuser helpers will be appropriately trapped. Acked-by:
-
Russell King authored
commit f928d4f2 upstream. Fill the empty regions of the vectors page with an exception generating instruction. This ensures that any inappropriate branch to the vector page is appropriately trapped, rather than just encountering some code to execute. (The vectors page was filled with zero before, which corresponds with the "andeq r0, r0, r0" instruction - a no-op.) Acked-by Nicolas Pitre <nico@linaro.org> Signed-off-by:
-
- 04 Aug, 2013 14 commits
-
-
Greg Kroah-Hartman authored
-
Yinghai Lu authored
commit d5c78673 upstream. On one sytem that mtrr range is more then 44bits, in dmesg we have [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-through [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 [000080000000-0000FFFFFFFF] mask 3FFF80000000 uncachable [ 0.000000] 1 [380000000000-38FFFFFFFFFF] mask 3F0000000000 uncachable [ 0.000000] 2 [000099000000-000099FFFFFF] mask 3FFFFF000000 write-through [ 0.000000] 3 [00009A000000-00009AFFFFFF] mask 3FFFFF000000 write-through [ 0.000000] 4 [381FFA000000-381FFBFFFFFF] mask 3FFFFE000000 write-through [ 0.000000] 5 [381FFC000000-381FFC0FFFFF] mask 3FFFFFF00000 write-through [ 0.000000] 6 [0000AD000000-0000ADFFFFFF] mask 3FFFFF000000 write-through [ 0.000000] 7 [0000BD000000-0000BDFFFFFF] mask 3FFFFF000000 write-through [ 0.000000] 8 disabled [ 0.000000] 9 disabled but /proc/mtrr report wrong: reg00: base=0x080000000 ( 2048MB), size= 2048MB, count=1: uncachable reg01: base=0x80000000000 (8388608MB), size=1048576MB, count=1: uncachable reg02: base=0x099000000 ( 2448MB), size= 16MB, count=1: write-through reg03: base=0x09a000000 ( 2464MB), size= 16MB, count=1: write-through reg04: base=0x81ffa000000 (8519584MB), size= 32MB, count=1: write-through reg05: base=0x81ffc000000 (8519616MB), size= 1MB, count=1: write-through reg06: base=0x0ad000000 ( 2768MB), size= 16MB, count=1: write-through reg07: base=0x0bd000000 ( 3024MB), size= 16MB, count=1: write-through reg08: base=0x09b000000 ( 2480MB), size= 16MB, count=1: write-combining so bit 44 and bit 45 get cut off. We have problems in arch/x86/kernel/cpu/mtrr/generic.c::generic_get_mtrr(). 1. for base, we miss cast base_lo to 64bit before shifting. Fix that by adding u64 casting. 2. for size, it only can handle 44 bits aka 32bits + page_shift Fix that with 64bit mask instead of 32bit mask_lo, then range could be more than 44bits. At the same time, we need to update size_or_mask for old cpus that does support cpuid 0x80000008 to get phys_addr. Need to set high 32bits to all 1s, otherwise will not get correct size for them. Also fix mtrr_add_page: it should check base and (base + size - 1) instead of base and size, as base and size could be small but base + size could bigger enough to be out of boundary. We can use boot_cpu_data.x86_phys_bits directly to avoid size_or_mask. So When are we going to have size more than 44bits? that is 16TiB. after patch we have right ouput: reg00: base=0x080000000 ( 2048MB), size= 2048MB, count=1: uncachable reg01: base=0x380000000000 (58720256MB), size=1048576MB, count=1: uncachable reg02: base=0x099000000 ( 2448MB), size= 16MB, count=1: write-through reg03: base=0x09a000000 ( 2464MB), size= 16MB, count=1: write-through reg04: base=0x381ffa000000 (58851232MB), size= 32MB, count=1: write-through reg05: base=0x381ffc000000 (58851264MB), size= 1MB, count=1: write-through reg06: base=0x0ad000000 ( 2768MB), size= 16MB, count=1: write-through reg07: base=0x0bd000000 ( 3024MB), size= 16MB, count=1: write-through reg08: base=0x09b000000 ( 2480MB), size= 16MB, count=1: write-combining -v2: simply checking in mtrr_add_page according to hpa. [ hpa: This probably wants to go into -stable only after having sat in mainline for a bit. It is not a regression. ] Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1371162815-29931-1-git-send-email-yinghai@kernel.orgSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Xiong Zhang authored
commit 06755608 upstream. obj->mm_list link to dev_priv->mm.inactive_list/active_list obj->global_list link to dev_priv->mm.unbound_list/bound_list This regression has been introduced in commit 93927ca5 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 10 18:03:00 2013 +0100 drm/i915: Revert shrinker changes from "Track unbound pages" Cc: stable@vger.kernel.org Signed-off-by:
Xiong Zhang <xiong.y.zhang@intel.com> [danvet: Add regression notice.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Zhouping Liu <zliu@redhat.com>
-
Michael Witten authored
commit a363a9da upstream. Among other things, the following: commit 31160d7f Date: Tue Jan 8 16:22:36 2013 -0500 perf tools: Fix GNU make v3.80 compatibility issue attempts to aid the user by tapping into an existing error message, as described in the commit message: ... Also fix an issue where _get_attempt was called with only one argument. This prevented the error message from printing the name of the variable that can be used to fix the problem. or more precisely: -$(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2))) +$(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2),$(1))) However, The "missing" argument was in fact missing on purpose; it's absence is a signal that the error message should be skipped, because the failure would be due to the default value, not any user-supplied value. This can be seen in how `_ge_attempt' uses `gea_err' (in the config/utilities.mak file): _ge_attempt = $(if $(get-executable),$(get-executable),$(_gea_warn)$(call _gea_err,$(2))) _gea_warn = $(warning The path '$(1)' is not executable.) _gea_err = $(if $(1),$(error Please set '$(1)' appropriately)) That is, because the argument is no longer missing, the value `$(1)' (associated with `_gea_err') always evaluates to true, thus always triggering the error condition that is meant to be reserved for only the case when a user explicitly supplies an invalid value. Concretely, the result is a regression in the Makefile's configuration of python support; rather than gracefully disable support when the relevant executables cannot be found according to default values, the build process halts in error as though the user explicitly supplied the values. This new commit simply reverts the offending one-line change. Reported-by:
Pekka Enberg <penberg@kernel.org> Link: http://lkml.kernel.org/r/CAOJsxLHv17Ys3M7P5q25imkUxQW6LE_vABxh1N3Tt7Mv6Ho4iw@mail.gmail.comSigned-off-by:
Michael Witten <mfwitten@gmail.com> Cc: Mark Brown <broonie@sirena.org.uk> Signed-off-by:
-
Nicholas Bellinger authored
commit 561bf158 upstream This patch moves ISCSI_OP_REJECT failures into iscsit_sequence_cmd() in order to avoid external iscsit_reject_cmd() reject usage for all PDU types. It also updates PDU specific handlers for traditional iscsi-target code to not reset the session after posting a ISCSI_OP_REJECT during setup. (v2: Fix CMDSN_LOWER_THAN_EXP for ISCSI_OP_SCSI to call target_put_sess_cmd() after iscsit_sequence_cmd() failure) Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Nicholas Bellinger authored
commit ba159914 upstream This patch changes iscsit_add_reject() + iscsit_add_reject_from_cmd() usage to not sleep on iscsi_cmd->reject_comp to address a free-after-use usage bug in v3.10 with iser-target code. It saves ->reject_reason for use within iscsit_build_reject() so the correct value for both transport cases. It also drops the legacy fail_conn parameter usage throughput iscsi-target code and adds two iscsit_add_reject_cmd() and iscsit_reject_cmd helper functions, along with various small cleanups. (v2: Re-enable target_put_sess_cmd() to be called from iscsit_add_reject_from_cmd() for rejects invoked after target_get_sess_cmd() has been called) Signed-off-by:
-
Sergey Senozhatsky authored
commit a01c34f7 upstream. Fix a warning from lockdep caused by calling flush_work() for uninitialized hotplug work. Initialize hotplug_work, audio_work and reset_work upon successful radeon_irq_kms_init() completion and thus perform hotplug flush_work only when rdev->irq.installed is true. [ 4.790019] [drm] Loading CEDAR Microcode [ 4.790943] r600_cp: Failed to load firmware "radeon/CEDAR_smc.bin" [ 4.791152] [drm:evergreen_startup] *ERROR* Failed to load firmware! [ 4.791330] radeon 0000:01:00.0: disabling GPU acceleration [ 4.792633] INFO: trying to register non-static key. [ 4.792792] the code is fine but needs lockdep annotation. [ 4.792953] turning off the locking correctness validator. [ 4.793114] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.11.0-rc0-dbg-10676-gfe56456-dirty #1816 [ 4.793314] Hardware name: Acer Aspire 5741G /Aspire 5741G , BIOS V1.20 02/08/2011 [ 4.793507] ffffffff821fd810 ffff8801530b9a18 ffffffff8160434e 0000000000000002 [ 4.794155] ffff8801530b9ad8 ffffffff810b8404 ffff8801530b0798 ffff8801530b0000 [ 4.794789] ffff8801530b9b00 0000000000000046 00000000000004c0 ffffffff00000000 [ 4.795418] Call Trace: [ 4.795573] [<ffffffff8160434e>] dump_stack+0x4e/0x82 [ 4.795731] [<ffffffff810b8404>] __lock_acquire+0x1a64/0x1d30 [ 4.795893] [<ffffffff814a87f0>] ? dev_vprintk_emit+0x50/0x60 [ 4.796034] [<ffffffff810b8fb4>] lock_acquire+0xa4/0x200 [ 4.796216] [<ffffffff8106cd75>] ? flush_work+0x5/0x280 [ 4.796375] [<ffffffff8106cdad>] flush_work+0x3d/0x280 [ 4.796520] [<ffffffff8106cd75>] ? flush_work+0x5/0x280 [ 4.796682] [<ffffffff810b659d>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [ 4.796862] [<ffffffff8131d775>] ? delay_tsc+0x95/0xf0 [ 4.797024] [<ffffffff8141bb8b>] radeon_irq_kms_fini+0x2b/0x70 [ 4.797186] [<ffffffff814557c9>] evergreen_init+0x2a9/0x2e0 [ 4.797347] [<ffffffff813ebb1f>] radeon_device_init+0x5ef/0x700 [ 4.797511] [<ffffffff81335bc7>] ? pci_find_capability+0x47/0x50 [ 4.797672] [<ffffffff813edaed>] radeon_driver_load_kms+0x8d/0x150 [ 4.797843] [<ffffffff813ce426>] drm_get_pci_dev+0x166/0x280 [ 4.798007] [<ffffffff8116cff5>] ? kfree+0xf5/0x2e0 [ 4.798168] [<ffffffff813ea298>] ? radeon_pci_probe+0x98/0xd0 [ 4.798329] [<ffffffff813ea2aa>] radeon_pci_probe+0xaa/0xd0 [ 4.798489] [<ffffffff81339404>] pci_device_probe+0x84/0xe0 [ 4.798644] [<ffffffff814ac7d6>] driver_probe_device+0x76/0x240 [ 4.798805] [<ffffffff814aca73>] __driver_attach+0x93/0xa0 [ 4.798948] [<ffffffff814ac9e0>] ? __device_attach+0x40/0x40 [ 4.799126] [<ffffffff814aa82b>] bus_for_each_dev+0x6b/0xb0 [ 4.799272] [<ffffffff814ac2be>] driver_attach+0x1e/0x20 [ 4.799434] [<ffffffff814abec0>] bus_add_driver+0x1f0/0x280 [ 4.799596] [<ffffffff814ad0e4>] driver_register+0x74/0x150 [ 4.799758] [<ffffffff8133923d>] __pci_register_driver+0x5d/0x60 [ 4.799936] [<ffffffff81d16efc>] ? ttm_init+0x67/0x67 [ 4.800081] [<ffffffff813ce655>] drm_pci_init+0x115/0x130 [ 4.800243] [<ffffffff81d16efc>] ? ttm_init+0x67/0x67 [ 4.800405] [<ffffffff81d16f98>] radeon_init+0x9c/0xba [ 4.800586] [<ffffffff810002ca>] do_one_initcall+0xfa/0x150 [ 4.800746] [<ffffffff81073f60>] ? parse_args+0x120/0x330 [ 4.800909] [<ffffffff81cdafae>] kernel_init_freeable+0x111/0x191 [ 4.801052] [<ffffffff81cda87a>] ? do_early_param+0x88/0x88 [ 4.801233] [<ffffffff815fb670>] ? rest_init+0x140/0x140 [ 4.801393] [<ffffffff815fb67e>] kernel_init+0xe/0x180 [ 4.801556] [<ffffffff8160dcac>] ret_from_fork+0x7c/0xb0 [ 4.801718] [<ffffffff815fb670>] ? rest_init+0x140/0x140 Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
David Vrabel authored
commit 179fbd5a upstream. Unbinding an event channel (either with the ioctl or when the evtchn device is closed) may deadlock because disable_irq() is called with port_user_lock held which is also locked by the interrupt handler. Think of the IOCTL_EVTCHN_UNBIND is being serviced, the routine has just taken the lock, and an interrupt happens. The evtchn_interrupt is invoked, tries to take the lock and spins forever. A quick glance at the code shows that the spinlock is a local IRQ variant. Unfortunately that does not help as "disable_irq() waits for the interrupt handler on all CPUs to stop running. If the irq occurs on another VCPU, it tries to take port_user_lock and can't because the unbind ioctl is holding it." (from David). Hence we cannot depend on the said spinlock to protect us. We could make it a system wide IRQ disable spinlock but there is a better way. We can piggyback on the fact that the existence of the spinlock is to make get_port_user() checks be up-to-date. And we can alter those checks to not depend on the spin lock (as it's protected by u->bind_mutex in the ioctl) and can remove the unnecessary locking (this is IOCTL_EVTCHN_UNBIND) path. In the interrupt handler we cannot use the mutex, but we do not need it. "The unbind disables the irq before making the port user stale, so when you clear it you are guaranteed that the interrupt handler that might use that port cannot be running." (from David). Hence this patch removes the spinlock usage on the teardown path and piggybacks on disable_irq happening before we muck with the get_port_user() data. This ensures that the interrupt handler will never run on stale data. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v1: Expanded the commit description a bit] Signed-off-by:
Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by:
-
Al Viro authored
commit acfec9a5 upstream. Eric Sandeen has found a nasty livelock in sget() - take a mount(2) about to fail. The superblock is on ->fs_supers, ->s_umount is held exclusive, ->s_active is 1. Along comes two more processes, trying to mount the same thing; sget() in each is picking that superblock, bumping ->s_count and trying to grab ->s_umount. ->s_active is 3 now. Original mount(2) finally gets to deactivate_locked_super() on failure; ->s_active is 2, superblock is still ->fs_supers because shutdown will *not* happen until ->s_active hits 0. ->s_umount is dropped and now we have two processes chasing each other: s_active = 2, A acquired ->s_umount, B blocked A sees that the damn thing is stillborn, does deactivate_locked_super() s_active = 1, A drops ->s_umount, B gets it A restarts the search and finds the same superblock. And bumps it ->s_active. s_active = 2, B holds ->s_umount, A blocked on trying to get it ... and we are in the earlier situation with A and B switched places. The root cause, of course, is that ->s_active should not grow until we'd got MS_BORN. Then failing ->mount() will have deactivate_locked_super() shut the damn thing down. Fortunately, it's easy to do - the key point is that grab_super() is called only for superblocks currently on ->fs_supers, so it can bump ->s_count and grab ->s_umount first, then check MS_BORN and bump ->s_active; we must never increment ->s_count for superblocks past ->kill_sb(), but grab_super() is never called for those. The bug is pretty old; we would've caught it by now, if not for accidental exclusion between sget() for block filesystems; the things like cgroup or e.g. mtd-based filesystems don't have anything of that sort, so they get bitten. The right way to deal with that is obviously to fix sget()... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Gianluca Anzolin authored
commit 1d9e689c upstream. The function tty_port_tty_hangup() could leak a reference to the tty_struct: struct tty_struct *tty = tty_port_tty_get(port); if (tty && (!check_clocal || !C_CLOCAL(tty))) { tty_hangup(tty); tty_kref_put(tty); } If tty != NULL and the second condition is false we never call tty_kref_put and the reference is leaked. Fix by always calling tty_kref_put() which accepts a NULL argument. The patch fixes a regression introduced by commit aa27a094. Acked-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
Gianluca Anzolin <gianluca@sottospazio.it> Acked-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Oleg Nesterov authored
commit 3964acd0 upstream. vma_adjust() does vma_set_policy(vma, vma_policy(next)) and this is doubly wrong: 1. This leaks vma->vm_policy if it is not NULL and not equal to next->vm_policy. This can happen if vma_merge() expands "area", not prev (case 8). 2. This sets the wrong policy if vma_merge() joins prev and area, area is the vma the caller needs to update and it still has the old policy. Revert commit 1444f92c ("mm: merging memory blocks resets mempolicy") which introduced these problems. Change mbind_range() to recheck mpol_equal() after vma_merge() to fix the problem that commit tried to address. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Steven T Hampson <steven.t.hampson@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Rong Wang authored
commit 1894870e upstream. The name of udc state attribute file under sysfs is registered as "state", while usb_gadget_set_state take it as "status" when it's going to update. This patch fixes the typo. Signed-off-by:
Rong Wang <Rong.Wang@csr.com> Signed-off-by:
Barry Song <Baohua.Song@csr.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Rick Farina (Zero_Chaos) authored
commit fed1f1ed upstream. RT Systems makes many usb serial cables based on the ftdi_sio driver for programming various amateur radios. This patch is a full listing of their current product offerings and should allow these cables to all be recognized. Signed-off-by:
Rick Farina (Zero_Chaos) <zerochaos@gentoo.org> Signed-off-by:
-
Larry Finger authored
commit bcfb8794 upstream. Commit a269913c entitled "rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue" has two bugs for USB drivers. Firstly, the work queue in question was not initialized. Secondly, the callback routine used by this queue is contained within the file used for PCI devices. As a result, it is not available for architectures without PCI hardware. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Reported-by:
Richard Genoud <richard.genoud@gmail.com> Tested-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
