- 10 Oct, 2012 5 commits
-
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Thomas Abraham authored
Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare calls as required by common clock framework. Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Acked-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Manjunathappa, Prakash authored
Save and restore register context of LCDC respectively before suspend and after resume. Signed-off-by:
Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by:
-
Manjunathappa, Prakash authored
Add pm_runtime support to the da8xx-fb frame buffer driver. Signed-off-by:
-
Alexander Holler authored
Line 0 and 1 were both written to line 0 (on the display) and all subsequent lines had an offset of -1. The result was that the last line on the display was never overwritten by writes to /dev/fbN. Cc: stable@vger.kernel.org Signed-off-by:
Alexander Holler <holler@ahsoftware.de> Acked-by:
Bernie Thompson <bernie@plugable.com> Signed-off-by:
-
- 22 Sep, 2012 30 commits
-
-
Sachin Kamat authored
'dsim' is allocated and checked for NULL in the probe function. Hence this check is redundant. This cleanup also fixes a potential NULL pointer dereference error when dsim which is NULL references its member in the error print message. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Sachin Kamat authored
This code is never executed and hence removed. Signed-off-by:
-
Stephen Boyd authored
This driver doesn't need to use these mach includes so remove them. This is a necessary step to support a single zImage. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Jingoo Han authored
The value of AUX channel differential amplitude current is changed from 8 mA to 16 mA, in order to increase AUX channel voltage level. In this case, AUX channel voltage level can be changed from 400 mV to 800 mV, when resistance between AUX TX and RX is 100 ohm. According to DP spec, although the normative voltage level is 390 mV, the informative voltage level is 430 mV. So, 800 mV can be helpful to improve voltage margin of AUX channel. Signed-off-by:
-
Jingoo Han authored
This patch adds bit-masking for LINK_TRAINING_CTL register, when pre-emphasis level is set. The bit 3 and bit 2 of LINK_TRAINING_CTL register are used for pre-emphasis level setting, so other bits should be masked. Signed-off-by:
-
Jingoo Han authored
This patch fixes the checkpatch warnings listed below: WARNING: usleep_range should not use min == max args; see Documentation/timers/timers-howto.txt WARNING: quoted string split across lines Signed-off-by:
-
Sachin Kamat authored
printk calls are replaced by pr_* and dev_* calls to silence checkpatch warnings. Signed-off-by:
-
Lars-Peter Clausen authored
Use devm_request_and_ioremap instead of request_mem_region + devm_ioremap. This also fixes the following compile error introduced in commit b2ca7f4d ("drivers/video/jz4740_fb.c: use devm_ functions"): drivers/video/jz4740_fb.c: In function 'jzfb_probe': drivers/video/jz4740_fb.c:676:2: error: implicit declaration of function 'devm_ioremap' drivers/video/jz4740_fb.c:676:13: warning: assignment makes pointer from integer without a cast Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Peter Senna Tschudin authored
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by:
-
Jean Delvare authored
It doesn't seem these spinlocks were properly initialized. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Wei Yongjun authored
Using list_move_tail() instead of list_del() + list_add_tail(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Daniel Drake authored
As detailed in the thread titled "viafb PLL/clock tweaking causes XO-1.5 instability," enabling or disabling the IGA1/IGA2 clocks causes occasional stability problems during suspend/resume cycles on this platform. This is rather odd, as the documentation suggests that clocks have two states (on/off) and the default (stable) configuration is configured to enable the clock only when it is needed. However, explicitly enabling *or* disabling the clock triggers this system instability, suggesting that there is a 3rd state at play here. Leaving the clock enable/disable registers alone solves this problem. This fixes spurious reboots during suspend/resume behaviour introduced by commit b692a63a. Signed-off-by:
Daniel Drake <dsd@laptop.org> Signed-off-by:
-
Jingoo Han authored
To check channel equalization, the value of LANE_ALIGN_STATUS_UPDATED is necessary in exynos_dp_channel_eq_ok(). Also, link_align includes this value. However, link_status does not include this value, so it makes the problem that channel equalization is failed during link training. Signed-off-by:
-
Manjunathappa, Prakash authored
It is expected that LCDC to continue to be disabled after resume if it is blanked before suspend. This is also true for DVFS. But it is observed that LCDC being enabled after suspend/resume cycle or DVFS. Correcting it by having check for FB_BLANK_UNBLANK before enabling. Signed-off-by:
-
Axel Lin authored
This fixes below build error: CC [M] drivers/video/mbx/mbxfb.o drivers/video/mbx/mbxfb.c: In function 'mbxfb_probe': drivers/video/mbx/mbxfb.c:942:2: error: implicit declaration of function 'devm_ioremap_nocache' [-Werror=implicit-function-declaration] drivers/video/mbx/mbxfb.c:942:22: warning: assignment makes pointer from integer without a cast [enabled by default] drivers/video/mbx/mbxfb.c:952:21: warning: assignment makes pointer from integer without a cast [enabled by default] cc1: some warnings being treated as errors Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
-
Roland Stigge authored
This patch removes the video driver for pnx4008. The architecture is being removed via the arm-soc tree. Signed-off-by:
Roland Stigge <stigge@antcom.de> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Manjunathappa, Prakash authored
Wait for active frame transfer to complete after disabling LCDC. At the same this wait is not be required when there are sync and underflow errors. Patch applies for revision 2 of LCDC present am335x. More information on disable and reset sequence can be found in section 13.4.6 of AM335x TRM @www.ti.com/am335x. Signed-off-by:
-
Devendra Naga authored
the driver's module init and exit functions are calling platform_driver_register and platform_driver_unregister and doing nothing else. This same as that of the module_platform_driver, remove this init and exit functions and use the module_platform_driver instead Signed-off-by:
Devendra Naga <develkernel412222@gmail.com> Signed-off-by:
-
Emil Goode authored
This patch solves problems with the error handling by introducing labels for proper error paths and it also frees resources that where missed. Signed-off-by:
Emil Goode <emilgoode@gmail.com> Signed-off-by:
-
Bjarni Ingi Gislason authored
The code 124 (0x7C, |) is rendered as a broken line in two fonts, instead of a continuous line. Some keyboards show a "broken bar" on one of theirs keys, other show a (continuous) "vertical line". Signed-off-by:
Bjarni Ingi Gislason <bjarniig@rhi.hi.is> Signed-off-by:
-
- 20 Sep, 2012 1 commit
-
-
Florian Tobias Schandinat authored
Merge branch 'v3.7-for-florian' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fbdev-next
-
- 23 Aug, 2012 4 commits
-
-
Jingoo Han authored
SW reset sets DP TX to initial value, so configurations for analog parameter and interrupt are not set properly. Therefore, exynos_dp_init_analog_param() and exynos_dp_init_interrupt() should be moved to after sw reset is called, in order to set these values properly. Signed-off-by:
-
Jingoo Han authored
This patch changes return type of exynos_dp_init_video to void, because the return value is unnecessary. Signed-off-by:
-
Sean Paul authored
Fix the return value of exynos_dp_get_pll_lock_status to reflect what it actually returns. Signed-off-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Olof Johansson <olofj@chromium.org> Acked-by:
-
Sean Paul authored
This patch adds the function name to aux transaction failure messages so we can tell which transaction is failing. It also changes the level of Aux Transaction fail messages from error to debug. We retry the transactions a few times and will report errors if warranted outside of this function. Signed-off-by:
Doug Anderson <dianders@chromium.org> Reviewed-by:
Bernie Thompson <bhthompson@chromium.org> Acked-by:
-
