- 19 Mar, 2019 40 commits
-
-
kbuild test robot authored
commit c634dc6b upstream. Fixes: 400816f6 ("perf/x86/intel: Implement support for TSX Force Abort") Signed-off-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: kbuild-all@01.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Zijlstra authored
commit ede271b0 upstream. Through: validate_event() x86_pmu.get_event_constraints(.idx=-1) tfa_get_event_constraints() dyn_constraint() cpuc->constraint_list[-1] is used, which is an obvious out-of-bound access. In this case, simply skip the TFA constraint code, there is no event constraint with just PMC3, therefore the code will never result in the empty set. Fixes: 400816f6 ("perf/x86/intel: Implement support for TSX Force Abort") Reported-by:
Tony Jones <tonyj@suse.com> Reported-by:
"DSouza, Nelson" <nelson.dsouza@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Jian-Hong Pan authored
commit cbc05fd6 upstream. The Acer TravelMate X514-51T with ALC255 cannot detect the headset MIC until ALC255_FIXUP_ACER_HEADSET_MIC quirk applied. Although, the internal DMIC uses another module - snd_soc_skl as the driver. We still need the NID 0x1a in the quirk to enable the headset MIC. Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit c0ca5ece upstream. Dell Precision 5820 with ALC3234 codec (which is equivalent with ALC255) shows click noises at (runtime) PM resume on the headphone. The biggest source of the noise comes from the cleared headphone pin control at resume, which is done via the standard shutup procedure. Although we have an override of the standard shutup callback to replace with NOP, this would skip other needed stuff (e.g. the pull down of headset power). So, instead, this "fixes" the behavior of alc_fixup_no_shutup() by introducing spec->no_shutup_pins flag. When this flag is set, Realtek codec won't call the standard snd_hda_shutup_pins() & co. Now alc_fixup_no_shutup() just sets this flag instead of overriding spec->shutup callback itself. This allows us to apply the similar fix for other entries easily if needed in future. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jian-Hong Pan authored
commit 8bb37a2a upstream. The ASUS UX362FA with ALC294 cannot detect the headset MIC and outputs through the internal speaker and the headphone. This issue can be fixed by the quirk in the commit 4e051106 ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294. Besides, ASUS UX362FA and UX533FD have the same audio initial pin config values. So, this patch replaces SND_PCI_QUIRK of UX533FD with a new SND_HDA_PIN_QUIRK which benefits both UX362FA and UX533FD. Fixes: 4e051106 ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294") Signed-off-by:
Ming Shuo Chiu <chiu@endlessm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jaroslav Kysela authored
commit 167897f4 upstream. Apply the HP_MIC_NO_PRESENCE fixups for the more HP Z2 G4 and HP Z240 models. Reported-by:
Jeff Burrell <jeff.burrell@hp.com> Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit cfc35f9c upstream. I set 10 seconds for the timeout of the i915 audio component binding with a hope that recent machines are fast enough to handle all probe tasks in that period, but I was too optimistic. The binding may take longer than that, and this caused a problem on the machine with both audio and graphics driver modules loaded in parallel, as Paul Menzel experienced. This problem haven't hit so often just because the KMS driver is loaded in initrd on most machines. As a simple workaround, extend the timeout to 60 seconds. Fixes: f9b54e19 ("ALSA: hda/i915: Allow delayed i915 audio component binding") Reported-by:
Paul Menzel <pmenzel+alsa-devel@molgen.mpg.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Sakamoto authored
commit f97a0944 upstream. In data blocks of common isochronous packet for MOTU devices, PCM frames are multiplexed in a shape of '24 bit * 4 Audio Pack', described in IEC 61883-6. The frames are not aligned to quadlet. For capture PCM substream, ALSA firewire-motu driver constructs PCM frames by reading data blocks byte-by-byte. However this operation includes bug for lower byte of the PCM sample. This brings invalid content of the PCM samples. This commit fixes the bug. Reported-by:
Peter Sjöberg <autopeter@gmail.com> Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 4641c939 ("ALSA: firewire-motu: add MOTU specific protocol layer") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Takashi Sakamoto authored
commit 7dc661bd upstream. ALSA bebob driver has an entry for Focusrite Saffire Pro 10 I/O. The entry matches vendor_id in root directory and model_id in unit directory of configuration ROM for IEEE 1394 bus. On the other hand, configuration ROM of Focusrite Liquid Saffire 56 has the same vendor_id and model_id. This device is an application of TCAT Dice (TCD2220 a.k.a Dice Jr.) however ALSA bebob driver can be bound to it randomly instead of ALSA dice driver. At present, drivers in ALSA firewire stack can not handle this situation appropriately. This commit uses more identical mod_alias for Focusrite Saffire Pro 10 I/O in ALSA bebob driver. $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 042a829d bus_info_length 4, crc_length 42, crc 33437 404 31333934 bus_name "1394" 408 f0649222 irmc 1, cmc 1, isc 1, bmc 1, pmc 0, cyc_clk_acc 100, max_rec 9 (1024), max_rom 2, gen 2, spd 2 (S400) 40c 00130e01 company_id 00130e | 410 000606e0 device_id 01000606e0 | EUI-64 00130e01000606e0 root directory ----------------------------------------------------------------- 414 0009d31c directory_length 9, crc 54044 418 04000014 hardware version 41c 0c0083c0 node capabilities per IEEE 1394 420 0300130e vendor 424 81000012 --> descriptor leaf at 46c 428 17000006 model 42c 81000016 --> descriptor leaf at 484 430 130120c2 version 434 d1000002 --> unit directory at 43c 438 d4000006 --> dependent info directory at 450 unit directory at 43c ----------------------------------------------------------------- 43c 0004707c directory_length 4, crc 28796 440 1200a02d specifier id: 1394 TA 444 13010001 version: AV/C 448 17000006 model 44c 81000013 --> descriptor leaf at 498 dependent info directory at 450 ----------------------------------------------------------------- 450 000637c7 directory_length 6, crc 14279 454 120007f5 specifier id 458 13000001 version 45c 3affffc7 (immediate value) 460 3b100000 (immediate value) 464 3cffffc7 (immediate value) 468 3d600000 (immediate value) descriptor leaf at 46c ----------------------------------------------------------------- 46c 00056f3b leaf_length 5, crc 28475 470 00000000 textual descriptor 474 00000000 minimal ASCII 478 466f6375 "Focu" 47c 73726974 "srit" 480 65000000 "e" descriptor leaf at 484 ----------------------------------------------------------------- 484 0004a165 leaf_length 4, crc 41317 488 00000000 textual descriptor 48c 00000000 minimal ASCII 490 50726f31 "Pro1" 494 30494f00 "0IO" descriptor leaf at 498 ----------------------------------------------------------------- 498 0004a165 leaf_length 4, crc 41317 49c 00000000 textual descriptor 4a0 00000000 minimal ASCII 4a4 50726f31 "Pro1" 4a8 30494f00 "0IO" $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 040442e4 bus_info_length 4, crc_length 4, crc 17124 404 31333934 bus_name "1394" 408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255, max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400) 40c 00130e04 company_id 00130e | 410 018001e9 device_id 04018001e9 | EUI-64 00130e04018001e9 root directory ----------------------------------------------------------------- 414 00065612 directory_length 6, crc 22034 418 0300130e vendor 41c 8100000a --> descriptor leaf at 444 420 17000006 model 424 8100000e --> descriptor leaf at 45c 428 0c0087c0 node capabilities per IEEE 1394 42c d1000001 --> unit directory at 430 unit directory at 430 ----------------------------------------------------------------- 430 000418a0 directory_length 4, crc 6304 434 1200130e specifier id 438 13000001 version 43c 17000006 model 440 8100000f --> descriptor leaf at 47c descriptor leaf at 444 ----------------------------------------------------------------- 444 00056f3b leaf_length 5, crc 28475 448 00000000 textual descriptor 44c 00000000 minimal ASCII 450 466f6375 "Focu" 454 73726974 "srit" 458 65000000 "e" descriptor leaf at 45c ----------------------------------------------------------------- 45c 000762c6 leaf_length 7, crc 25286 460 00000000 textual descriptor 464 00000000 minimal ASCII 468 4c495155 "LIQU" 46c 49445f53 "ID_S" 470 41464649 "AFFI" 474 52455f35 "RE_5" 478 36000000 "6" descriptor leaf at 47c ----------------------------------------------------------------- 47c 000762c6 leaf_length 7, crc 25286 480 00000000 textual descriptor 484 00000000 minimal ASCII 488 4c495155 "LIQU" 48c 49445f53 "ID_S" 490 41464649 "AFFI" 494 52455f35 "RE_5" 498 36000000 "6" Cc: <stable@vger.kernel.org> # v3.16+ Fixes: 25784ec2 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series") Signed-off-by:
-
Peter Zijlstra authored
commit f764c58b upstream. Guenter reported a build warning for CONFIG_CPU_SUP_INTEL=n: > With allmodconfig-CONFIG_CPU_SUP_INTEL, this patch results in: > > In file included from arch/x86/events/amd/core.c:8:0: > arch/x86/events/amd/../perf_event.h:1036:45: warning: ‘struct cpu_hw_event’ declared inside parameter list will not be visible outside of this definition or declaration > static inline int intel_cpuc_prepare(struct cpu_hw_event *cpuc, int cpu) While harmless (an unsed pointer is an unused pointer, no matter the type) it needs fixing. Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jaegeuk Kim authored
commit 31867b23 upstream. Otherwise, we can get wrong counts incurring checkpoint hang. IO_W (CP: -24, Data: 24, Flush: ( 0 0 1), Discard: ( 0 0)) Thread A Thread B - f2fs_write_data_pages - __write_data_page - f2fs_submit_page_write - inc_page_count(F2FS_WB_DATA) type is F2FS_WB_DATA due to file is non-atomic one - f2fs_ioc_start_atomic_write - set_inode_flag(FI_ATOMIC_FILE) - f2fs_write_end_io - dec_page_count(F2FS_WB_CP_DATA) type is F2FS_WB_DATA due to file becomes atomic one Cc: <stable@vger.kernel.org> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Vlad Buslov authored
[ Upstream commit ecb3dea4 ] When adding new filter to flower classifier, fl_change() inserts it to handle_idr before initializing filter extensions and assigning it a mask. Normally this ordering doesn't matter because all flower classifier ops callbacks assume rtnl lock protection. However, when filter has an action that doesn't have its kernel module loaded, rtnl lock is released before call to request_module(). During this time the filter can be accessed bu concurrent task before its initialization is completed, which can lead to a crash. Example case of NULL pointer dereference in concurrent dump: Task 1 Task 2 tc_new_tfilter() fl_change() idr_alloc_u32(fnew) fl_set_parms() tcf_exts_validate() tcf_action_init() tcf_action_init_1() rtnl_unlock() request_module() ... rtnl_lock() tc_dump_tfilter() tcf_chain_dump() fl_walk() idr_get_next_ul() tcf_node_dump() tcf_fill_node() fl_dump() mask = &f->mask->key; <- NULL ptr rtnl_lock() Extension initialization and mask assignment don't depend on fnew->handle that is allocated by idr_alloc_u32(). Move idr allocation code after action creation and mask assignment in fl_change() to prevent concurrent access to not fully initialized filter when rtnl lock is released to load action module. Fixes: 01683a14 ("net: sched: refactor flower walk to iterate over idr") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Al Viro authored
[ Upstream commit ae3b5641 ] Several u->addr and u->path users are not holding any locks in common with unix_bind(). unix_state_lock() is useless for those purposes. u->addr is assign-once and *(u->addr) is fully set up by the time we set u->addr (all under unix_table_lock). u->path is also set in the same critical area, also before setting u->addr, and any unix_sock with ->path filled will have non-NULL ->addr. So setting ->addr with smp_store_release() is all we need for those "lockless" users - just have them fetch ->addr with smp_load_acquire() and don't even bother looking at ->path if they see NULL ->addr. Users of ->addr and ->path fall into several classes now: 1) ones that do smp_load_acquire(u->addr) and access *(u->addr) and u->path only if smp_load_acquire() has returned non-NULL. 2) places holding unix_table_lock. These are guaranteed that *(u->addr) is seen fully initialized. If unix_sock is in one of the "bound" chains, so's ->path. 3) unix_sock_destructor() using ->addr is safe. All places that set u->addr are guaranteed to have seen all stores *(u->addr) while holding a reference to u and unix_sock_destructor() is called when (atomic) refcount hits zero. 4) unix_release_sock() using ->path is safe. unix_bind() is serialized wrt unix_release() (normally - by struct file refcount), and for the instances that had ->path set by unix_bind() unix_release_sock() comes from unix_release(), so they are fine. Instances that had it set in unix_stream_connect() either end up attached to a socket (in unix_accept()), in which case the call chain to unix_release_sock() and serialization are the same as in the previous case, or they never get accept'ed and unix_release_sock() is called when the listener is shut down and its queue gets purged. In that case the listener's queue lock provides the barriers needed - unix_stream_connect() shoves our unix_sock into listener's queue under that lock right after having set ->path and eventual unix_release_sock() caller picks them from that queue under the same lock right before calling unix_release_sock(). 5) unix_find_other() use of ->path is pointless, but safe - it happens with successful lookup by (abstract) name, so ->path.dentry is guaranteed to be NULL there. earlier-variant-reviewed-by:
"Paul E. McKenney" <paulmck@linux.ibm.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Ursula Braun authored
[ Upstream commit d7cf4a3b ] smc_poll() returns with mask bit EPOLLPRI if the connection urg_state is SMC_URG_VALID. Since SMC_URG_VALID is zero, smc_poll signals EPOLLPRI errorneously if called in state SMC_INIT before the connection is created, for instance in a non-blocking connect scenario. This patch switches to non-zero values for the urg states. Reviewed-by:
Karsten Graul <kgraul@linux.ibm.com> Fixes: de8474eb ("net/smc: urgent data support") Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Michal Soltys authored
[ Upstream commit 3c963a33 ] This patch fixes a subtle PACKET_ORIGDEV regression which was a side effect of fixes introduced by: 6a9e461f bonding: pass link-local packets to bonding master also. ... to: b89f04c6 bonding: deliver link-local packets with skb->dev set to link that packets arrived on While 6a9e461f restored pre-b89f04c6 presence of link-local packets on bonding masters (which is required e.g. by linux bridges participating in spanning tree or needed for lab-like setups created with group_fwd_mask) it also caused the originating device information to be lost due to cloning. Maciej Żenczykowski proposed another solution that doesn't require packet cloning and retains original device information - instead of returning RX_HANDLER_PASS for all link-local packets it's now limited only to packets from inactive slaves. At the same time, packets passed to bonding masters retain correct information about the originating device and PACKET_ORIGDEV can be used to determine it. This elegantly solves all issues so far: - link-local packets that were removed from bonding masters - LLDP daemons being forced to explicitly bind to slave interfaces - PACKET_ORIGDEV having no effect on bond interfaces Fixes: 6a9e461f (bonding: pass link-local packets to bonding master also.) Reported-by:
Vincent Bernat <vincent@bernat.ch> Signed-off-by:
Michal Soltys <soltys@ziu.info> Signed-off-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit bf1dc8ba ] We need a RCU critical section around rt6_info->from deference, and proper annotation. Fixes: 4ed591c8 ("net/ipv6: Allow onlink routes to have a device mismatch if it is the default route") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 193f3685 ] We must access rt6_info->from under RCU read lock: move the dereference under such lock, with proper annotation. v1 -> v2: - avoid using multiple, racy, fetch operations for rt->from Fixes: a68886a6 ("net/ipv6: Make from in rt6_info rcu protected") Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 7cc9f700 ] When running Docker with userns isolation e.g. --userns-remap="default" and spawning up some containers with CAP_NET_ADMIN under this realm, I noticed that link changes on ipvlan slave device inside that container can affect all devices from this ipvlan group which are in other net namespaces where the container should have no permission to make changes to, such as the init netns, for example. This effectively allows to undo ipvlan private mode and switch globally to bridge mode where slaves can communicate directly without going through hostns, or it allows to switch between global operation mode (l2/l3/l3s) for everyone bound to the given ipvlan master device. libnetwork plugin here is creating an ipvlan master and ipvlan slave in hostns and a slave each that is moved into the container's netns upon creation event. * In hostns: # ip -d a [...] 8: cilium_host@bond0: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l3 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.0.1/32 scope link cilium_host valid_lft forever preferred_lft forever [...] * Spawn container & change ipvlan mode setting inside of it: # docker run -dt --cap-add=NET_ADMIN --network cilium-net --name client -l app=test cilium/netperf 9fff485d69dcb5ce37c9e33ca20a11ccafc236d690105aadbfb77e4f4170879c # docker exec -ti client ip -d a [...] 10: cilium0@if4: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l3 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0 valid_lft forever preferred_lft forever # docker exec -ti client ip link change link cilium0 name cilium0 type ipvlan mode l2 # docker exec -ti client ip -d a [...] 10: cilium0@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0 valid_lft forever preferred_lft forever * In hostns (mode switched to l2): # ip -d a [...] 8: cilium_host@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.0.1/32 scope link cilium_host valid_lft forever preferred_lft forever [...] Same l3 -> l2 switch would also happen by creating another slave inside the container's network namespace when specifying the existing cilium0 link to derive the actual (bond0) master: # docker exec -ti client ip link add link cilium0 name cilium1 type ipvlan mode l2 # docker exec -ti client ip -d a [...] 2: cilium1@if4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 10: cilium0@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0 valid_lft forever preferred_lft forever * In hostns: # ip -d a [...] 8: cilium_host@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.0.1/32 scope link cilium_host valid_lft forever preferred_lft forever [...] One way to mitigate it is to check CAP_NET_ADMIN permissions of the ipvlan master device's ns, and only then allow to change mode or flags for all devices bound to it. Above two cases are then disallowed after the patch. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
George Wilkie authored
[ Upstream commit 8c7a7726 ] When a port is added to a team, its initial state is derived from netif_carrier_ok rather than netif_oper_up. If it is carrier up but operationally down at the time of being added, the port state.linkup will be set prematurely. port state.linkup should be set consistently using netif_oper_up rather than netif_carrier_ok. Fixes: f1d22a1e ("team: account for oper state") Signed-off-by:
George Wilkie <gwilkie@vyatta.att-mail.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit f5b51fe8 ] When a netdevice is unregistered, we flush the relevant exception via rt6_sync_down_dev() -> fib6_ifdown() -> fib6_del() -> fib6_del_route(). Finally, we end-up calling rt6_remove_exception(), where we release the relevant dst, while we keep the references to the related fib6_info and dev. Such references should be released later when the dst will be destroyed. There are a number of caches that can keep the exception around for an unlimited amount of time - namely dst_cache, possibly even socket cache. As a result device registration may hang, as demonstrated by this script: ip netns add cl ip netns add rt ip netns add srv ip netns exec rt sysctl -w net.ipv6.conf.all.forwarding=1 ip link add name cl_veth type veth peer name cl_rt_veth ip link set dev cl_veth netns cl ip -n cl link set dev cl_veth up ip -n cl addr add dev cl_veth 2001::2/64 ip -n cl route add default via 2001::1 ip -n cl link add tunv6 type ip6tnl mode ip6ip6 local 2001::2 remote 2002::1 hoplimit 64 dev cl_veth ip -n cl link set tunv6 up ip -n cl addr add 2013::2/64 dev tunv6 ip link set dev cl_rt_veth netns rt ip -n rt link set dev cl_rt_veth up ip -n rt addr add dev cl_rt_veth 2001::1/64 ip link add name rt_srv_veth type veth peer name srv_veth ip link set dev srv_veth netns srv ip -n srv link set dev srv_veth up ip -n srv addr add dev srv_veth 2002::1/64 ip -n srv route add default via 2002::2 ip -n srv link add tunv6 type ip6tnl mode ip6ip6 local 2002::1 remote 2001::2 hoplimit 64 dev srv_veth ip -n srv link set tunv6 up ip -n srv addr add 2013::1/64 dev tunv6 ip link set dev rt_srv_veth netns rt ip -n rt link set dev rt_srv_veth up ip -n rt addr add dev rt_srv_veth 2002::2/64 ip netns exec srv netserver & sleep 0.1 ip netns exec cl ping6 -c 4 2013::1 ip netns exec cl netperf -H 2013::1 -t TCP_STREAM -l 3 & sleep 1 ip -n rt link set dev rt_srv_veth mtu 1400 wait %2 ip -n cl link del cl_veth This commit addresses the issue purging all the references held by the exception at time, as we currently do for e.g. ipv6 pcpu dst entries. v1 -> v2: - re-order the code to avoid accessing dst and net after dst_dev_put() Fixes: 93531c67 ("net/ipv6: separate handling of FIB entries from dst based routes") Signed-off-by:
-
Kalash Nainwal authored
[ Upstream commit 97f0082a ] Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 to keep legacy software happy. This is similar to what was done for ipv4 in commit 709772e6 ("net: Fix routing tables with id > 255 for legacy software"). Signed-off-by:
Kalash Nainwal <kalash@arista.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 6ff7b060 ] KASAN has found use-after-free in fixed_mdio_bus_init, commit 0c692d07 ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") call put_device() while device_register() fails,give up the last reference to the device and allow mdiobus_release to be executed ,kfreeing the bus. However in most drives, mdiobus_free be called to free the bus while mdiobus_register fails. use-after-free occurs when access bus again, this patch revert it to let mdiobus_free free the bus. KASAN report details as below: BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524 CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 fixed_mdio_bus_init+0x283/0x1000 [fixed_phy] ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 Allocated by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143 fixed_mdio_bus_init+0x163/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kfree+0xe1/0x270 mm/slub.c:3938 device_release+0x78/0x200 drivers/base/core.c:919 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 put_device+0x1c/0x30 drivers/base/core.c:2060 __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382 fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc824c80 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 248 bytes inside of 2048-byte region [ffff8881dc824c80, ffff8881dc825480) The buggy address belongs to the page: page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0 flags: 0x2fffc0000010200(slab|head) raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800 raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0c692d07 ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 797a22bd ] syzbot was able to trigger another soft lockup [1] I first thought it was the O(N^2) issue I mentioned in my prior fix (f657d22ee1f "net/x25: do not hold the cpu too long in x25_new_lci()"), but I eventually found that x25_bind() was not checking SOCK_ZAPPED state under socket lock protection. This means that multiple threads can end up calling x25_insert_socket() for the same socket, and corrupt x25_list [1] watchdog: BUG: soft lockup - CPU#0 stuck for 123s! [syz-executor.2:10492] Modules linked in: irq event stamp: 27515 hardirqs last enabled at (27514): [<ffffffff81006673>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (27515): [<ffffffff8100668f>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (32): [<ffffffff8632ee73>] x25_get_neigh+0xa3/0xd0 net/x25/x25_link.c:336 softirqs last disabled at (34): [<ffffffff86324bc3>] x25_find_socket+0x23/0x140 net/x25/af_x25.c:341 CPU: 0 PID: 10492 Comm: syz-executor.2 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__sanitizer_cov_trace_pc+0x4/0x50 kernel/kcov.c:97 Code: f4 ff ff ff e8 11 9f ea ff 48 c7 05 12 fb e5 08 00 00 00 00 e9 c8 e9 ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 <48> 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 38 0c 92 7e 81 e2 RSP: 0018:ffff88806e94fc48 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffff1100d84dac5 RBX: 0000000000000001 RCX: ffffc90006197000 RDX: 0000000000040000 RSI: ffffffff86324bf3 RDI: ffff88806c26d628 RBP: ffff88806e94fc48 R08: ffff88806c1c6500 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: ffff88806c26d628 R13: ffff888090455200 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f3a107e4700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3a107e3db8 CR3: 00000000a5544000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __x25_find_socket net/x25/af_x25.c:327 [inline] x25_find_socket+0x7d/0x140 net/x25/af_x25.c:342 x25_new_lci net/x25/af_x25.c:355 [inline] x25_connect+0x380/0xde0 net/x25/af_x25.c:784 __sys_connect+0x266/0x330 net/socket.c:1662 __do_sys_connect net/socket.c:1673 [inline] __se_sys_connect net/socket.c:1670 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1670 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f3a107e3c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e29 RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000005 RBP: 000000000073c040 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3a107e46d4 R13: 00000000004be362 R14: 00000000004ceb98 R15: 00000000ffffffff Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 10493 Comm: syz-executor.3 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline] RIP: 0010:queued_write_lock_slowpath+0x143/0x290 kernel/locking/qrwlock.c:86 Code: 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 41 0f b6 55 00 <41> 38 d7 7c eb 84 d2 74 e7 48 89 df e8 cc aa 4e 00 eb dd be 04 00 RSP: 0018:ffff888085c47bd8 EFLAGS: 00000206 RAX: 0000000000000300 RBX: ffffffff89412b00 RCX: 1ffffffff1282560 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89412b00 RBP: ffff888085c47c70 R08: 1ffffffff1282560 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: 00000000000000ff R13: fffffbfff1282560 R14: 1ffff11010b88f7d R15: 0000000000000003 FS: 00007fdd04086700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdd04064db8 CR3: 0000000090be0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: queued_write_lock include/asm-generic/qrwlock.h:104 [inline] do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline] _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267 x25_bind+0x273/0x340 net/x25/af_x25.c:703 __sys_bind+0x23f/0x290 net/socket.c:1481 __do_sys_bind net/socket.c:1492 [inline] __se_sys_bind net/socket.c:1490 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Fixes: 90c27297 ("X.25 remove bkl in bind") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 8511a653 ] Calculation of qp mtt size (in function mlx4_RST2INIT_wrapper) ultimately depends on function roundup_pow_of_two. If the amount of memory required by the QP is less than one page, roundup_pow_of_two is called with argument zero. In this case, the roundup_pow_of_two result is undefined. Calling roundup_pow_of_two with a zero argument resulted in the following stack trace: UBSAN: Undefined behaviour in ./include/linux/log2.h:61:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 4 PID: 26939 Comm: rping Tainted: G OE 4.19.0-rc1 Hardware name: Supermicro X9DR3-F/X9DR3-F, BIOS 3.2a 07/09/2015 Call Trace: dump_stack+0x9a/0xeb ubsan_epilogue+0x9/0x7c __ubsan_handle_shift_out_of_bounds+0x254/0x29d ? __ubsan_handle_load_invalid_value+0x180/0x180 ? debug_show_all_locks+0x310/0x310 ? sched_clock+0x5/0x10 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x260 ? find_held_lock+0x35/0x1e0 ? mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core] mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core] Fix this by explicitly testing for zero, and returning one if the argument is zero (assuming that the next higher power of 2 in this case should be one). Fixes: c82e9aa0 ("mlx4_core: resource tracking for HCA resources used by guests") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit c07d2792 ] In procedures mlx4_cmd_use_events() and mlx4_cmd_use_polling(), we need to guarantee that there are no FW commands in progress on the comm channel (for VFs) or wrapped FW commands (on the PF) when SRIOV is active. We do this by also taking the slave_cmd_mutex when SRIOV is active. This is especially important when switching from event to polling, since we free the command-context array during the switch. If there are FW commands in progress (e.g., waiting for a completion event), the completion event handler will access freed memory. Since the decision to use comm_wait or comm_poll is taken before grabbing the event_sem/poll_sem in mlx4_comm_cmd_wait/poll, we must take the slave_cmd_mutex as well (to guarantee that the decision to use events or polling and the call to the appropriate cmd function are atomic). Fixes: a7e1f049 ("net/mlx4_core: Fix deadlock when switching between polling and event fw commands") Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit e15ce4b8 ] As part of unloading a device, the driver switches from FW command event mode to FW command polling mode. Part of switching over to polling mode is freeing the command context array memory (unfortunately, currently, without NULLing the command context array pointer). The reset flow calls "complete" to complete all outstanding fw commands (if we are in event mode). The check for event vs. polling mode here is to test if the command context array pointer is NULL. If the reset flow is activated after the switch to polling mode, it will attempt (incorrectly) to complete all the commands in the context array -- because the pointer was not NULLed when the driver switched over to polling mode. As a result, we have a use-after-free situation, which results in a kernel crash. For example: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90 PGD 0 Oops: 0000 [#1] SMP Modules linked in: netconsole nfsv3 nfs_acl nfs lockd grace ... CPU: 2 PID: 940 Comm: kworker/2:3 Kdump: loaded Not tainted 3.10.0-862.el7.x86_64 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016 Workqueue: events hv_eject_device_work [pci_hyperv] task: ffff8d1734ca0fd0 ti: ffff8d17354bc000 task.ti: ffff8d17354bc000 RIP: 0010:[<ffffffff876c4a8e>] [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90 RSP: 0018:ffff8d17354bfa38 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff8d17362d42c8 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8d17362d42c8 RBP: ffff8d17354bfa70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000298 R11: ffff8d173610e000 R12: ffff8d17362d42d0 R13: 0000000000000246 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8d1802680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000f16d8000 CR4: 00000000001406e0 Call Trace: [<ffffffff876c7adc>] complete+0x3c/0x50 [<ffffffffc04242f0>] mlx4_cmd_wake_completions+0x70/0x90 [mlx4_core] [<ffffffffc041e7b1>] mlx4_enter_error_state+0xe1/0x380 [mlx4_core] [<ffffffffc041fa4b>] mlx4_comm_cmd+0x29b/0x360 [mlx4_core] [<ffffffffc041ff51>] __mlx4_cmd+0x441/0x920 [mlx4_core] [<ffffffff877f62b1>] ? __slab_free+0x81/0x2f0 [<ffffffff87951384>] ? __radix_tree_lookup+0x84/0xf0 [<ffffffffc043a8eb>] mlx4_free_mtt_range+0x5b/0xb0 [mlx4_core] [<ffffffffc043a957>] mlx4_mtt_cleanup+0x17/0x20 [mlx4_core] [<ffffffffc04272c7>] mlx4_free_eq+0xa7/0x1c0 [mlx4_core] [<ffffffffc042803e>] mlx4_cleanup_eq_table+0xde/0x130 [mlx4_core] [<ffffffffc0433e08>] mlx4_unload_one+0x118/0x300 [mlx4_core] [<ffffffffc0434191>] mlx4_remove_one+0x91/0x1f0 [mlx4_core] The fix is to set the command context array pointer to NULL after freeing the array. Fixes: f5aef5aa ("net/mlx4_core: Activate reset flow upon fatal command cases") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 59cbf56f ] Same reasons than the ones explained in commit 4179cb5a ("vxlan: test dev->flags & IFF_UP before calling netif_rx()") netif_rx() or gro_cells_receive() must be called under a strict contract. At device dismantle phase, core networking clears IFF_UP and flush_all_backlogs() is called after rcu grace period to make sure no incoming packet might be in a cpu backlog and still referencing the device. A similar protocol is used for gro_cells infrastructure, as gro_cells_destroy() will be called only after a full rcu grace period is observed after IFF_UP has been cleared. Most drivers call netif_rx() from their interrupt handler, and since the interrupts are disabled at device dismantle, netif_rx() does not have to check dev->flags & IFF_UP Virtual drivers do not have this guarantee, and must therefore make the check themselves. Otherwise we risk use-after-free and/or crashes. Fixes: d342894c ("vxlan: virtual extensible lan") Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit ad6c9986 ] If we receive a packet while deleting a VXLAN device, there's a chance vxlan_rcv() is called at the same time as vxlan_dellink(). This is fine, except that vxlan_dellink() should never ever touch stuff that's still in use, such as the GRO cells list. Otherwise, vxlan_rcv() crashes while queueing packets via gro_cells_receive(). Move the gro_cells_destroy() to vxlan_uninit(), which runs after the RCU grace period is elapsed and nothing needs the gro_cells anymore. This is now done in the same way as commit 8e816df8 ("geneve: Use GRO cells infrastructure.") originally implemented for GENEVE. Reported-by:
Jianlin Shi <jishi@redhat.com> Fixes: 58ce31cc ("vxlan: GRO support at tunnel layer") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
-
Guillaume Nault authored
[ Upstream commit 9d3e1368 ] Commit 7716682c ("tcp/dccp: fix another race at listener dismantle") let inet_csk_reqsk_queue_add() fail, and adjusted {tcp,dccp}_check_req() accordingly. However, TFO and syncookies weren't modified, thus leaking allocated resources on error. Contrary to tcp_check_req(), in both syncookies and TFO cases, we need to drop the request socket. Also, since the child socket is created with inet_csk_clone_lock(), we have to unlock it and drop an extra reference (->sk_refcount is initially set to 2 and inet_csk_reqsk_queue_add() drops only one ref). For TFO, we also need to revert the work done by tcp_try_fastopen() (with reqsk_fastopen_remove()). Fixes: 7716682c ("tcp/dccp: fix another race at listener dismantle") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Christoph Paasch authored
[ Upstream commit f2feaefd ] Since commit eeea10b8 ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()"), tcp_vX_fill_cb is only called after tcp_filter(). That means, TCP_SKB_CB(skb)->end_seq still points to the IP-part of the cb. We thus should not mock with it, as this can trigger bugs (thanks syzkaller): [ 12.349396] ================================================================== [ 12.350188] BUG: KASAN: slab-out-of-bounds in ip6_datagram_recv_specific_ctl+0x19b3/0x1a20 [ 12.351035] Read of size 1 at addr ffff88006adbc208 by task test_ip6_datagr/1799 Setting end_seq is actually no more necessary in tcp_filter as it gets initialized later on in tcp_vX_fill_cb. Cc: Eric Dumazet <edumazet@google.com> Fixes: eeea10b8 ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
-
Soheil Hassas Yeganeh authored
[ Upstream commit 6466e715 ] Returning 0 as inq to userspace indicates there is no more data to read, and the application needs to wait for EPOLLIN. For a connection that has received FIN from the remote peer, however, the application must continue reading until getting EOF (return value of 0 from tcp_recvmsg) or an error, if edge-triggered epoll (EPOLLET) is being used. Otherwise, the application will never receive a new EPOLLIN, since there is no epoll edge after the FIN. Return 1 when there is no data left on the queue but the connection has received FIN, so that the applications continue reading. Fixes: b75eba76 (tcp: send in-queue bytes in cmsg upon read) Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 2e990dfd ] syzbot reported a NULL-ptr deref caused by that sched->init() in sctp_stream_init() set stream->rr_next = NULL. kasan: GPF could be caused by NULL-ptr deref or user memory access RIP: 0010:sctp_sched_rr_dequeue+0xd3/0x170 net/sctp/stream_sched_rr.c:141 Call Trace: sctp_outq_dequeue_data net/sctp/outqueue.c:90 [inline] sctp_outq_flush_data net/sctp/outqueue.c:1079 [inline] sctp_outq_flush+0xba2/0x2790 net/sctp/outqueue.c:1205 All sched info is saved in sout->ext now, in sctp_stream_init() sctp_stream_alloc_out() will not change it, there's no need to call sched->init() again, since sctp_outq_init() has already done it. Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations") Reported-by: syzbot+4c9934f20522c0efd657@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 69ffaebb ] rxrpc_get_client_conn() adds a new call to the front of the waiting_calls queue if the connection it's going to use already exists. This is bad as it allows calls to get starved out. Fix this by adding to the tail instead. Also change the other enqueue point in the same function to put it on the front (ie. when we have a new connection). This makes the point that in the case of a new connection the new call goes at the front (though it doesn't actually matter since the queue should be unoccupied). Fixes: 45025bce ("rxrpc: Improve management and caching of client connection objects") Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit ee60ad21 ] The race occurs in __mkroute_output() when 2 threads lookup a dst: CPU A CPU B find_exception() find_exception() [fnhe expires] ip_del_fnhe() [fnhe is deleted] rt_bind_exception() In rt_bind_exception() it will bind a deleted fnhe with the new dst, and this dst will get no chance to be freed. It causes a dev defcnt leak and consecutive dmesg warnings: unregister_netdevice: waiting for ethX to become free. Usage count = 1 Especially thanks Jon to identify the issue. This patch fixes it by setting fnhe_daddr to 0 in ip_del_fnhe() to stop binding the deleted fnhe with a new dst when checking fnhe's fnhe_daddr and daddr in rt_bind_exception(). It works as both ip_del_fnhe() and rt_bind_exception() are protected by fnhe_lock and the fhne is freed by kfree_rcu(). Fixes: deed49df ("route: check and remove route cache when we get route") Signed-off-by:
Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by:
-
Masaru Nagai authored
[ Upstream commit ae9819e3 ] Hardware has the CBS (Credit Based Shaper) which affects only Q3 and Q2. When updating the CBS settings, even if the driver does so after waiting for Tx DMA finished, there is a possibility that frame data still remains in TxFIFO. To avoid this, decrease TxFIFO depth of Q3 and Q2 to one. This patch has been exercised this using netperf TCP_MAERTS, TCP_STREAM and UDP_STREAM tests run on an Ebisu board. No performance change was detected, outside of noise in the tests, both in terms of throughput and CPU utilisation. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: updated changelog] Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Xin Long authored
[ Upstream commit 9417d81f ] sk_setup_caps() is called to set sk->sk_dst_cache in pptp_connect, so we have to dst_release(sk->sk_dst_cache) in pptp_sock_destruct, otherwise, the dst refcnt will leak. It can be reproduced by this syz log: r1 = socket$pptp(0x18, 0x1, 0x2) bind$pptp(r1, &(0x7f0000000100)={0x18, 0x2, {0x0, @local}}, 0x1e) connect$pptp(r1, &(0x7f0000000000)={0x18, 0x2, {0x3, @remote}}, 0x1e) Consecutive dmesg warnings will occur: unregister_netdevice: waiting for lo to become free. Usage count = 1 v1->v2: - use rcu_dereference_protected() instead of rcu_dereference_check(), as suggested by Eric. Fixes: 00959ade ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)") Reported-by:
Xiumei Mu <xmu@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit ee74d0bd ] In case x25_connect() fails and frees the socket neighbour, we also need to undo the change done to x25->state. Before my last bug fix, we had use-after-free so this patch fixes a latent bug. syzbot report : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 16137 Comm: syz-executor.1 Not tainted 5.0.0+ #117 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:x25_write_internal+0x1e8/0xdf0 net/x25/x25_subr.c:173 Code: 00 40 88 b5 e0 fe ff ff 0f 85 01 0b 00 00 48 8b 8b 80 04 00 00 48 ba 00 00 00 00 00 fc ff df 48 8d 79 1c 48 89 fe 48 c1 ee 03 <0f> b6 34 16 48 89 fa 83 e2 07 83 c2 03 40 38 f2 7c 09 40 84 f6 0f RSP: 0018:ffff888076717a08 EFLAGS: 00010207 RAX: ffff88805f2f2292 RBX: ffff8880a0ae6000 RCX: 0000000000000000 kobject: 'loop5' (0000000018d0d0ee): kobject_uevent_env RDX: dffffc0000000000 RSI: 0000000000000003 RDI: 000000000000001c RBP: ffff888076717b40 R08: ffff8880950e0580 R09: ffffed100be5e46d R10: ffffed100be5e46c R11: ffff88805f2f2363 R12: ffff888065579840 kobject: 'loop5' (0000000018d0d0ee): fill_kobj_path: path = '/devices/virtual/block/loop5' R13: 1ffff1100ece2f47 R14: 0000000000000013 R15: 0000000000000013 FS: 00007fb88cf43700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9a42a41028 CR3: 0000000087a67000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: x25_release+0xd0/0x340 net/x25/af_x25.c:658 __sock_release+0xd3/0x2b0 net/socket.c:579 sock_close+0x1b/0x30 net/socket.c:1162 __fput+0x2df/0x8d0 fs/file_table.c:278 ____fput+0x16/0x20 fs/file_table.c:309 task_work_run+0x14a/0x1c0 kernel/task_work.c:113 get_signal+0x1961/0x1d50 kernel/signal.c:2388 do_signal+0x87/0x1940 arch/x86/kernel/signal.c:816 exit_to_usermode_loop+0x244/0x2c0 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline] syscall_return_slowpath arch/x86/entry/common.c:268 [inline] do_syscall_64+0x52d/0x610 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457f29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fb88cf42c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: fffffffffffffe00 RBX: 0000000000000003 RCX: 0000000000457f29 RDX: 0000000000000012 RSI: 0000000020000080 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb88cf436d4 R13: 00000000004be462 R14: 00000000004cec98 R15: 00000000ffffffff Modules linked in: Fixes: 95d6ebd5 ("net/x25: fix use-after-free in x25_device_event()") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 95d6ebd5 ] In case of failure x25_connect() does a x25_neigh_put(x25->neighbour) but forgets to clear x25->neighbour pointer, thus triggering use-after-free. Since the socket is visible in x25_list, we need to hold x25_list_lock to protect the operation. syzbot report : BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline] BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854 CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 x25_kill_by_device net/x25/af_x25.c:217 [inline] x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4467c9 Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9 RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003 RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000 R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669 Allocated by task 7843: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615 kmalloc include/linux/slab.h:545 [inline] x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249 x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7865: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:457 kasan_slab_free+0xe/0x10 mm/kasan/common.c:465 __cache_free mm/slab.c:3494 [inline] kfree+0xcf/0x230 mm/slab.c:3811 x25_neigh_put include/net/x25.h:253 [inline] x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a030edc0 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 16 bytes inside of 256-byte region [ffff8880a030edc0, ffff8880a030eec0) The buggy address belongs to the page: page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0 raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Signed-off-by:
-
Miaohe Lin authored
[ Upstream commit a843dc4e ] In func check_6rd,tunnel->ip6rd.relay_prefixlen may equal to 32,so UBSAN complain about it. UBSAN: Undefined behaviour in net/ipv6/sit.c:781:47 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 6 PID: 20036 Comm: syz-executor.0 Not tainted 4.19.27 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 ubsan_epilogue+0xe/0x81 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x293/0x2e8 lib/ubsan.c:425 check_6rd.constprop.9+0x433/0x4e0 net/ipv6/sit.c:781 try_6rd net/ipv6/sit.c:806 [inline] ipip6_tunnel_xmit net/ipv6/sit.c:866 [inline] sit_tunnel_xmit+0x141c/0x2720 net/ipv6/sit.c:1033 __netdev_start_xmit include/linux/netdevice.h:4300 [inline] netdev_start_xmit include/linux/netdevice.h:4309 [inline] xmit_one net/core/dev.c:3243 [inline] dev_hard_start_xmit+0x17c/0x780 net/core/dev.c:3259 __dev_queue_xmit+0x1656/0x2500 net/core/dev.c:3829 neigh_output include/net/neighbour.h:501 [inline] ip6_finish_output2+0xa36/0x2290 net/ipv6/ip6_output.c:120 ip6_finish_output+0x3e7/0xa20 net/ipv6/ip6_output.c:154 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip6_output+0x1e2/0x720 net/ipv6/ip6_output.c:171 dst_output include/net/dst.h:444 [inline] ip6_local_out+0x99/0x170 net/ipv6/output_core.c:176 ip6_send_skb+0x9d/0x2f0 net/ipv6/ip6_output.c:1697 ip6_push_pending_frames+0xc0/0x100 net/ipv6/ip6_output.c:1717 rawv6_push_pending_frames net/ipv6/raw.c:616 [inline] rawv6_sendmsg+0x2435/0x3530 net/ipv6/raw.c:946 inet_sendmsg+0xf8/0x5c0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xc8/0x110 net/socket.c:631 ___sys_sendmsg+0x6cf/0x890 net/socket.c:2114 __sys_sendmsg+0xf0/0x1b0 net/socket.c:2152 do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
linmiaohe <linmiaohe@huawei.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 1e027960 ] syzbot found another add_timer() issue, this time in net/hsr [1] Let's use mod_timer() which is safe. [1] kernel BUG at kernel/time/timer.c:1136! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 15909 Comm: syz-executor.3 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 kobject: 'loop2' (00000000f5629718): kobject_uevent_env RIP: 0010:add_timer kernel/time/timer.c:1136 [inline] RIP: 0010:add_timer+0x654/0xbe0 kernel/time/timer.c:1134 Code: 0f 94 c5 31 ff 44 89 ee e8 09 61 0f 00 45 84 ed 0f 84 77 fd ff ff e8 bb 5f 0f 00 e8 07 10 a0 ff e9 68 fd ff ff e8 ac 5f 0f 00 <0f> 0b e8 a5 5f 0f 00 0f 0b e8 9e 5f 0f 00 4c 89 b5 58 ff ff ff e9 RSP: 0018:ffff8880656eeca0 EFLAGS: 00010246 kobject: 'loop2' (00000000f5629718): fill_kobj_path: path = '/devices/virtual/block/loop2' RAX: 0000000000040000 RBX: 1ffff1100caddd9a RCX: ffffc9000c436000 RDX: 0000000000040000 RSI: ffffffff816056c4 RDI: ffff88806a2f6cc8 RBP: ffff8880656eed58 R08: ffff888067f4a300 R09: ffff888067f4abc8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88806a2f6cc0 R13: dffffc0000000000 R14: 0000000000000001 R15: ffff8880656eed30 FS: 00007fc2019bf700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000738000 CR3: 0000000067e8e000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: hsr_check_announce net/hsr/hsr_device.c:99 [inline] hsr_check_carrier_and_operstate+0x567/0x6f0 net/hsr/hsr_device.c:120 hsr_netdev_notify+0x297/0xa00 net/hsr/hsr_main.c:51 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] dev_open net/core/dev.c:1436 [inline] dev_open+0x143/0x160 net/core/dev.c:1424 team_port_add drivers/net/team/team.c:1203 [inline] team_add_slave+0xa07/0x15d0 drivers/net/team/team.c:1933 do_set_master net/core/rtnetlink.c:2358 [inline] do_set_master+0x1d4/0x230 net/core/rtnetlink.c:2332 do_setlink+0x966/0x3510 net/core/rtnetlink.c:2493 rtnl_setlink+0x271/0x3b0 net/core/rtnetlink.c:2747 rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192 netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:632 sock_write_iter+0x27c/0x3e0 net/socket.c:923 call_write_iter include/linux/fs.h:1869 [inline] do_iter_readv_writev+0x5e0/0x8e0 fs/read_write.c:680 do_iter_write fs/read_write.c:956 [inline] do_iter_write+0x184/0x610 fs/read_write.c:937 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1001 do_writev+0xf6/0x290 fs/read_write.c:1036 __do_sys_writev fs/read_write.c:1109 [inline] __se_sys_writev fs/read_write.c:1106 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1106 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457f29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc2019bec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457f29 RDX: 0000000000000001 RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc2019bf6d4 R13: 00000000004c4a60 R14: 00000000004dd218 R15: 00000000ffffffff Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by:
-
