Invoke mutex_destroy() to catch any esw state_lock errors.
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Annotate mutex destroy to keep it symmetric to init sequence.
It should be destroyed after its users (representor netdevices) are
destroyed in below flow.

esw_offloads_disable()
  esw_offloads_unload_rep()

Hence, initialize the mutex before creating the representors which uses
it.
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Allow passing NULL spec when creating a flow rule. Such rules will act
as "catch all" flow rules.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Following introduction of per vport configuration of vport and rep,
unload all reps per rep type is still needed as IB reps can be
unloaded individually. However, a few internal functions exist purely
for this purpose, merge them to a single function.

This patch doesn't change any existing functionality.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Currently, ECPF eswitch manager does one-time only configuration for
VF vports when device switches to offloads mode. However, when num of
VFs changed from host side, driver doesn't update VF vports
configurations.

Hence, perform VFs vport configuration update whenever num_vfs change
event occurs.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Both legacy and offload modes require vport setup, only offload mode
requires rep setup. Before this patch, vport and rep operations are
separated applied to all relevant vports in different stages.

Change to use per vport configuration, so that vport and rep operations
are modularized per vport.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Vport enable and disable sequence is incorrect. It should be:
  enable()
  esw_vport_setup_acl,
  esw_vport_setup,
  esw_vport_enable_qos.

  disable()
  esw_vport_disable_qos,
  esw_vport_cleanup,
  esw_vport_cleanup_acl.

Instead of having two setup functions for port and acl, merge
acl setup to port setup function.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Rename esw_apply_vport_config() to esw_vport_setup(), and add new
helper function esw_vport_cleanup() to make them symmetric.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

esw_vport_enable_qos can return error in cases below:
1. QoS is already enabled. Warnning is useless in this case.
2. Create scheduling element cmd failed. There is already a warning.

Remove the redundant warnning if esw_vport_enable_qos returns err.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Consider scenario below, CPU 1 is at risk to query already destroyed
drop counters. Need to apply the same state mutex when disabling vport.

+-------------------------------+-------------------------------------+
| CPU 0                         | CPU 1                               |
+-------------------------------+-------------------------------------+
| mlx5_device_disable_sriov     | mlx5e_get_vf_stats                  |
| mlx5_eswitch_disable          | mlx5_eswitch_get_vport_stats        |
| esw_disable_vport             | mlx5_eswitch_query_vport_drop_stats |
| mlx5_fc_destroy(drop_counter) | mlx5_fc_query(drop_counter)         |
+-------------------------------+-------------------------------------+

Fixes: b8a0dbe3 ("net/mlx5e: E-switch, Add steering drop counters")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

esw_vport_create_legacy_acl_tables bails out immediately for eswitch
manager, hence remove all the check of esw manager cap after.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Minor overlapping changes, nothing serious.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm fixes from Dave Airlie:
 "It's a bit quieter, probably not as much as it could be.

  There is on large regression fix in here from Lyude for displayport
  bandwidth calculations, there've been reports of multi-monitor in
  docks not working since -rc1 and this has been tested to fix those.

  Otherwise it's a bunch of i915 (with some GVT fixes), a set of amdgpu
  watermark + bios fixes, and an exynos iommu cleanup fix.

  core:
   - DP MST bandwidth regression fix.

  i915:
   - hard lockup fix
   - GVT fixes
   - 32-bit alignment issue fix
   - timeline wait fixes
   - cacheline_retire and free

  amdgpu:
   - Update the display watermark bounding box for navi14
   - Fix fetching vbios directly from rom on vega20/arcturus
   - Navi and renoir watermark fixes

  exynos:
   - iommu object cleanup fix"

`

* tag 'drm-fixes-2020-03-13' of git://anongit.freedesktop.org/drm/drm:
  drm/dp_mst: Rewrite and fix bandwidth limit checks
  drm/dp_mst: Reprobe path resources in CSN handler
  drm/dp_mst: Use full_pbn instead of available_pbn for bandwidth checks
  drm/dp_mst: Rename drm_dp_mst_is_dp_mst_end_device() to be less redundant
  drm/i915: Defer semaphore priority bumping to a workqueue
  drm/i915/gt: Close race between cacheline_retire and free
  drm/i915/execlists: Enable timeslice on partial virtual engine dequeue
  drm/i915: be more solid in checking the alignment
  drm/i915/gvt: Fix dma-buf display blur issue on CFL
  drm/i915: Return early for await_start on same timeline
  drm/i915: Actually emit the await_start
  drm/amdgpu/powerplay: nv1x, renior copy dcn clock settings of watermark to smu during boot up
  drm/exynos: Fix cleanup of IOMMU related objects
  drm/amdgpu: correct ROM_INDEX/DATA offset for VEGA20
  drm/amd/display: update soc bb for nv14
  drm/i915/gvt: Fix emulated vbt size issue
  drm/i915/gvt: Fix unnecessary schedule timer when no vGPU exits

Merge tag 'topic/mst-bw-check-fixes-for-airlied-2020-03-12-2' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

UAPI Changes: None

Cross-subsystem Changes: None

Core Changes: Fixed regressions introduced by commit cd82d82c
("drm/dp_mst: Add branch bandwidth validation to MST atomic check"),
which would cause us to:

* Calculate the available bandwidth on an MST topology incorrectly, and
  as a result reject most display configurations that would try to enable
  more then one sink on a topology
* Occasionally expose MST connectors to userspace before finishing
  probing their PBN capabilities, resulting in us rejecting display
  configurations because we assumed briefly that no bandwidth was
  available

Driver Changes: None
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bf16ee577567beed91c86b7d9cda3ec2e8c50a71.camel@redhat.com

Merge tag 'drm-intel-fixes-2020-03-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.6-rc6:
- hard lockup fix
- GVT fixes
- 32-bit alignment issue fix
- timeline wait fixes
- cacheline_retire and free
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lfo6ksvw.fsf@intel.com

Merge tag 'amd-drm-fixes-5.6-2020-03-11' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.6-2020-03-11:

amdgpu:
- Update the display watermark bounding box for navi14
- Fix fetching vbios directly from rom on vega20/arcturus
- Navi and renoir watermark fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312020924.4161-1-alexander.deucher@amd.com

Pull networking fixes from David Miller:
 "It looks like a decent sized set of fixes, but a lot of these are one
  liner off-by-one and similar type changes:

   1) Fix netlink header pointer to calcular bad attribute offset
      reported to user. From Pablo Neira Ayuso.

   2) Don't double clear PHY interrupts when ->did_interrupt is set,
      from Heiner Kallweit.

   3) Add missing validation of various (devlink, nl802154, fib, etc.)
      attributes, from Jakub Kicinski.

   4) Missing *pos increments in various netfilter seq_next ops, from
      Vasily Averin.

   5) Missing break in of_mdiobus_register() loop, from Dajun Jin.

   6) Don't double bump tx_dropped in veth driver, from Jiang Lidong.

   7) Work around FMAN erratum A050385, from Madalin Bucur.

   8) Make sure ARP header is pulled early enough in bonding driver,
      from Eric Dumazet.

   9) Do a cond_resched() during multicast processing of ipvlan and
      macvlan, from Mahesh Bandewar.

  10) Don't attach cgroups to unrelated sockets when in interrupt
      context, from Shakeel Butt.

  11) Fix tpacket ring state management when encountering unknown GSO
      types. From Willem de Bruijn.

  12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend()
      only in the suspend context. From Heiner Kallweit"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
  net: systemport: fix index check to avoid an array out of bounds access
  tc-testing: add ETS scheduler to tdc build configuration
  net: phy: fix MDIO bus PM PHY resuming
  net: hns3: clear port base VLAN when unload PF
  net: hns3: fix RMW issue for VLAN filter switch
  net: hns3: fix VF VLAN table entries inconsistent issue
  net: hns3: fix "tc qdisc del" failed issue
  taprio: Fix sending packets without dequeueing them
  net: mvmdio: avoid error message for optional IRQ
  net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register
  net: memcg: fix lockdep splat in inet_csk_accept()
  s390/qeth: implement smarter resizing of the RX buffer pool
  s390/qeth: refactor buffer pool code
  s390/qeth: use page pointers to manage RX buffer pool
  seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number
  net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
  net/packet: tpacket_rcv: do not increment ring index on drop
  sxgbe: Fix off by one in samsung driver strncpy size arg
  net: caif: Add lockdep expression to RCU traversal primitive
  MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer
  ...

Sigh, this is mostly my fault for not giving commit cd82d82c
("drm/dp_mst: Add branch bandwidth validation to MST atomic check")
enough scrutiny during review. The way we're checking bandwidth
limitations here is mostly wrong:

For starters, drm_dp_mst_atomic_check_bw_limit() determines the
pbn_limit of a branch by simply scanning each port on the current branch
device, then uses the last non-zero full_pbn value that it finds. It
then counts the sum of the PBN used on each branch device for that
level, and compares against the full_pbn value it found before.

This is wrong because ports can and will have different PBN limitations
on many hubs, especially since a number of DisplayPort hubs out there
will be clever and only use the smallest link rate required for each
downstream sink - potentially giving every port a different full_pbn
value depending on what link rate it's trained at. This means with our
current code, which max PBN value we end up with is not well defined.

Additionally, we also need to remember when checking bandwidth
limitations that the top-most device in any MST topology is a branch
device, not a port. This means that the first level of a topology
doesn't technically have a full_pbn value that needs to be checked.
Instead, we should assume that so long as our VCPI allocations fit we're
within the bandwidth limitations of the primary MSTB.

We do however, want to check full_pbn on every port including those of
the primary MSTB. However, it's important to keep in mind that this
value represents the minimum link rate /between a port's sink or mstb,
and the mstb itself/. A quick diagram to explain:

                                MSTB #1
                               /       \
                              /         \
                           Port #1    Port #2
       full_pbn for Port #1 → |          | ← full_pbn for Port #2
                           Sink #1    MSTB #2
                                         |
                                       etc...

Note that in the above diagram, the combined PBN from all VCPI
allocations on said hub should not exceed the full_pbn value of port #2,
and the display configuration on sink #1 should not exceed the full_pbn
value of port #1. However, port #1 and port #2 can otherwise consume as
much bandwidth as they want so long as their VCPI allocations still fit.

And finally - our current bandwidth checking code also makes the mistake
of not checking whether something is an end device or not before trying
to traverse down it.

So, let's fix it by rewriting our bandwidth checking helpers. We split
the function into one part for handling branches which simply adds up
the total PBN on each branch and returns it, and one for checking each
port to ensure we're not going over its PBN limit. Phew.

This should fix regressions seen, where we erroneously reject display
configurations due to thinking they're going over our bandwidth limits
when they're not.

Changes since v1:
* Took an even closer look at how PBN limitations are supposed to be
  handled, and did some experimenting with Sean Paul. Ended up rewriting
  these helpers again, but this time they should actually be correct!
Changes since v2:
* Small indenting fix
* Fix pbn_used check in drm_dp_mst_atomic_check_port_bw_limit()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: cd82d82c ("drm/dp_mst: Add branch bandwidth validation to MST atomic check")
Cc: Sean Paul <seanpaul@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309210131.1497545-1-lyude@redhat.com

We used to punt off reprobing path resources to the link address probe
work, but now that we handle CSNs asynchronously from the driver's HPD
handling we can do whatever the heck we want from the CSN!

So, reprobe the path resources from drm_dp_mst_handle_conn_stat(). Also,
get rid of the path resource reprobing code in
drm_dp_check_and_send_link_address() since it's needlessly complicated
when we already reprobe path resources from
drm_dp_handle_link_address_port(). And finally, teach
drm_dp_send_enum_path_resources() to return 1 on PBN changes so we know
if we need to send another hotplug or not.

This fixes issues where we've indicated to userspace that a port has
just been connected, before we actually probed it's available PBN -
something that results in unexpected atomic check failures.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: cd82d82c ("drm/dp_mst: Add branch bandwidth validation to MST atomic check")
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-4-lyude@redhat.comReviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>

DisplayPort specifications are fun. For a while, it's been really
unclear to us what available_pbn actually does. There's a somewhat vague
explanation in the DisplayPort spec (starting from 1.2) that partially
explains it:

  The minimum payload bandwidth number supported by the path. Each node
  updates this number with its available payload bandwidth number if its
  payload bandwidth number is less than that in the Message Transaction
  reply.

So, it sounds like available_pbn represents the smallest link rate in
use between the source and the branch device. Cool, so full_pbn is just
the highest possible PBN that the branch device supports right?

Well, we assumed that for quite a while until Sean Paul noticed that on
some MST hubs, available_pbn will actually get set to 0 whenever there's
any active payloads on the respective branch device. This caused quite a
bit of confusion since clearing the payload ID table would end up fixing
the available_pbn value.

So, we just went with that until commit cd82d82c ("drm/dp_mst: Add
branch bandwidth validation to MST atomic check") started breaking
people's setups due to us getting erroneous available_pbn values. So, we
did some more digging and got confused until we finally looked at the
definition for full_pbn:

  The bandwidth of the link at the trained link rate and lane count
  between the DP Source device and the DP Sink device with no time slots
  allocated to VC Payloads, represented as a Payload Bandwidth Number. As
  with the Available_Payload_Bandwidth_Number, this number is determined
  by the link with the lowest lane count and link rate.

That's what we get for not reading specs closely enough, hehe. So, since
full_pbn is definitely what we want for doing bandwidth restriction
checks - let's start using that instead and ignore available_pbn
entirely.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: cd82d82c ("drm/dp_mst: Add branch bandwidth validation to MST atomic check")
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-3-lyude@redhat.comReviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>

It's already prefixed by dp_mst, so we don't really need to repeat
ourselves here. One of the changes I should have picked up originally
when reviewing MST DSC support.

There should be no functional changes here

Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Sean Paul <seanpaul@google.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-2-lyude@redhat.com

Convert the various uses of fallthrough comments to fallthrough;

Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/

And by hand:

net/ipv6/ip6_fib.c has a fallthrough comment outside of an #ifdef block
that causes gcc to emit a warning if converted in-place.

So move the new fallthrough; inside the containing #ifdef/#endif too.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to unlock before returning if this allocation fails.

Fixes: 75f36270 ("octeontx2-pf: Support to enable/disable pause frames via ethtool")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull vfs fixes from Al Viro:
 "A couple of fixes for old crap in ->atomic_open() instances"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  cifs_atomic_open(): fix double-put on late allocation failure
  gfs2_atomic_open(): fix O_EXCL|O_CREAT handling on cold dcache

Currently the bounds check on index is off by one and can lead to
an out of bounds access on array priv->filters_loc when index is
RXCHK_BRCM_TAG_MAX.

Fixes: bb9051a2 ("net: systemport: Add support for WAKE_FILTER")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: fix net-next

David:	These patches resolve two issues caused by the IPA driver
	being incorporated into net-next.  I hope you will merge
	them as soon as you can.

The IPA driver was merged into net-next last week, but two problems
arise as a result, affecting net-next and linux-next:
  - The patch that defines field_max() was not incorporated into
    net-next, but is required by the IPA code
  - A patch that updates "sdm845.dtsi" *was* incorporated into
    net-next, but other changes to that file in the Qualcomm
    for-next branch lead to errors

Bjorn has agreed to incorporate the DTS file change into the
Qualcomm tree after it is reverted from net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 9cc5ae12.

This commit:
  b303f9f0 arm64: dts: sdm845: Redefine interconnect provider DT nodes
found in the Qualcomm for-next tree removes/redefines the interconnect
provider node(s) used for IPA.  I'm not sure whether it technically
conflicts with the IPA change to "sdm845.dtsi" in for-next, but it renders
it broken.

Revert this commit in the for-next tree, with the plan to incorporate
it into the Qualcomm tree instead.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Define FIELD_MAX(), which supplies the maximum value that can be
represented by a field value.  Define field_max() as well, to go
along with the lower-case forms of the field mask functions.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

add CONFIG_NET_SCH_ETS to 'config', otherwise test suites using this file
to perform a full tdc run will encounter the following warning:

  ok 645 e90e - Add ETS qdisc using bands # skipped - "-----> teardown stage" did not complete successfully

Fixes: 82c664b6 ("selftests: qdiscs: Add test coverage for ETS Qdisc")
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

So far we have the unfortunate situation that mdio_bus_phy_may_suspend()
is called in suspend AND resume path, assuming that function result is
the same. After the original change this is no longer the case,
resulting in broken resume as reported by Geert.

To fix this call mdio_bus_phy_may_suspend() in the suspend path only,
and let the phy_device store the info whether it was suspended by
MDIO bus PM.

Fixes: 503ba7c6 ("net: phy: Avoid multiple suspends")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michal Kubecek says:

====================
ethtool netlink interface, part 3

Implementation of more netlink request types:

  - netdev features (ethtool -k/-K, patches 3-6)
  - private flags (--show-priv-flags / --set-priv-flags, patches 7-9)
  - ring sizes (ethtool -g/-G, patches 10-12)
  - channel counts (ethtool -l/-L, patches 13-15)

Patch 1 is a style cleanup suggested in part 2 review and patch 2 updates
the mapping between netdev features and legacy ioctl requests (which are
still used by ethtool for backward compatibility).

Changes in v2:
  - fix netdev reference leaks in error path of ethnl_set_rings() and
    ethnl_set_channels() (found by Jakub Kicinski)
  - use __set_bit() rather than set_bit() (suggested by David Miller)
  - in replies to RINGS_GET and CHANNELS_GET requests, omit ring and
    channel types not supported by driver/device (suggested by Jakub
    Kicinski)
  - more descriptive message size calculations in rings_reply_size() and
    channels_reply_size() (suggested by Jakub Kicinski)
  - coding style cleanup (suggested by Jakub Kicinski)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Send ETHTOOL_MSG_CHANNELS_NTF notification whenever channel counts of
a network device are modified using ETHTOOL_MSG_CHANNELS_SET netlink
message or ETHTOOL_SCHANNELS ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement CHANNELS_SET netlink request to set channel counts of a network
device. These are traditionally set with ETHTOOL_SCHANNELS ioctl request.

Like the ioctl implementation, the generic ethtool code checks if supplied
values do not exceed driver defined limits; if they do, first offending
attribute is reported using extack. Checks preventing removing channels
used for RX indirection table or zerocopy AF_XDP socket are also
implemented.

Move ethtool_get_max_rxfh_channel() helper into common.c so that it can be
used by both ioctl and netlink code.

v2:
  - fix netdev reference leak in error path (found by Jakub Kicinsky)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement CHANNELS_GET request to get channel counts of a network device.
These are traditionally available via ETHTOOL_GCHANNELS ioctl request.

Omit attributes for channel types which are not supported by driver or
device (zero reported for maximum).

v2: (all suggested by Jakub Kicinski)
  - minor cleanup in channels_prepare_data()
  - more descriptive channels_reply_size()
  - omit attributes with zero max count
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Send ETHTOOL_MSG_RINGS_NTF notification whenever ring sizes of a network
device are modified using ETHTOOL_MSG_RINGS_SET netlink message or
ETHTOOL_SRINGPARAM ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement RINGS_SET netlink request to set ring sizes of a network device.
These are traditionally set with ETHTOOL_SRINGPARAM ioctl request.

Like the ioctl implementation, the generic ethtool code checks if supplied
values do not exceed driver defined limits; if they do, first offending
attribute is reported using extack.

v2:
  - fix netdev reference leak in error path (found by Jakub Kicinsky)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement RINGS_GET request to get ring sizes of a network device. These
are traditionally available via ETHTOOL_GRINGPARAM ioctl request.

Omit attributes for ring types which are not supported by driver or device
(zero reported for maximum).

v2: (all suggested by Jakub Kicinski)
  - minor cleanup in rings_prepare_data()
  - more descriptive rings_reply_size()
  - omit attributes with zero max size
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Send ETHTOOL_MSG_PRIVFLAGS_NTF notification whenever private flags of
a network device are modified using ETHTOOL_MSG_PRIVFLAGS_SET netlink
message or ETHTOOL_SPFLAGS ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement PRIVFLAGS_SET netlink request to set private flags of a network
device. These are traditionally set with ETHTOOL_SPFLAGS ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement PRIVFLAGS_GET request to get private flags for a network device.
These are traditionally available via ETHTOOL_GPFLAGS ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>