- 01 Jul, 2020 40 commits
-
-
Fan Guo authored
[ Upstream commit a17f4bed ] If ib_dma_mapping_error() returns non-zero value, ib_mad_post_receive_mads() will jump out of loops and return -ENOMEM without freeing mad_priv. Fix this memory-leak problem by freeing mad_priv in this case. Fixes: 2c34e68f ("IB/mad: Check and handle potential DMA mapping errors") Link: https://lore.kernel.org/r/20200612063824.180611-1-guofan5@huawei.comSigned-off-by:
Fan Guo <guofan5@huawei.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Qiushi Wu authored
[ Upstream commit f141a422 ] Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count if pm_runtime_put is not called in error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails. Fixes: fc05a5b2 ("ASoC: rockchip: add support for pdm controller") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20200613205158.27296-1-wu000273@umn.eduSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mark Zhang authored
[ Upstream commit 730c8912 ] The bind_list and listen_list must be accessed under a lock, add the missing locking around the access in cm_ib_id_from_event() In addition add lockdep asserts to make it clearer what the locking semantic is here. general protection fault: 0000 [#1] SMP NOPTI CPU: 226 PID: 126135 Comm: kworker/226:1 Tainted: G OE 4.12.14-150.47-default #1 SLE15 Hardware name: Cray Inc. Windom/Windom, BIOS 0.8.7 01-10-2020 Workqueue: ib_cm cm_work_handler [ib_cm] task: ffff9c5a60a1d2c0 task.stack: ffffc1d91f554000 RIP: 0010:cma_ib_req_handler+0x3f1/0x11b0 [rdma_cm] RSP: 0018:ffffc1d91f557b40 EFLAGS: 00010286 RAX: deacffffffffff30 RBX: 0000000000000001 RCX: ffff9c2af5bb6000 RDX: 00000000000000a9 RSI: ffff9c5aa4ed2f10 RDI: ffffc1d91f557b08 RBP: ffffc1d91f557d90 R08: ffff9c340cc80000 R09: ffff9c2c0f901900 R10: 0000000000000000 R11: 0000000000000001 R12: deacffffffffff30 R13: ffff9c5a48aeec00 R14: ffffc1d91f557c30 R15: ffff9c5c2eea3688 FS: 0000000000000000(0000) GS:ffff9c5c2fa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00002b5cc03fa320 CR3: 0000003f8500a000 CR4: 00000000003406e0 Call Trace: ? rdma_addr_cancel+0xa0/0xa0 [ib_core] ? cm_process_work+0x28/0x140 [ib_cm] cm_process_work+0x28/0x140 [ib_cm] ? cm_get_bth_pkey.isra.44+0x34/0xa0 [ib_cm] cm_work_handler+0xa06/0x1a6f [ib_cm] ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to+0x7c/0x4b0 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 process_one_work+0x1da/0x400 worker_thread+0x2b/0x3f0 ? process_one_work+0x400/0x400 kthread+0x118/0x140 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x22/0x40 Code: 00 66 83 f8 02 0f 84 ca 05 00 00 49 8b 84 24 d0 01 00 00 48 85 c0 0f 84 68 07 00 00 48 2d d0 01 00 00 49 89 c4 0f 84 59 07 00 00 <41> 0f b7 44 24 20 49 8b 77 50 66 83 f8 0a 75 9e 49 8b 7c 24 28 Fixes: 4c21b5bc ("IB/cma: Add net_dev and private data checks to RDMA CM") Link: https://lore.kernel.org/r/20200616104304.2426081-1-leon@kernel.orgSigned-off-by:
Mark Zhang <markz@mellanox.com> Reviewed-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Michal Kalderon authored
[ Upstream commit 0dfbd5ec ] Private data passed to iwarp_cm_handler is copied for connection request / response, but ignored otherwise. If junk is passed, it is stored in the event and used later in the event processing. The driver passes an old junk pointer during connection close which leads to a use-after-free on event processing. Set private data to NULL for events that don 't have private data. BUG: KASAN: use-after-free in ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: Read of size 4 at addr ffff8886caa71200 by task kworker/u128:1/5250 kernel: kernel: Workqueue: iw_cm_wq cm_work_handler [iw_cm] kernel: Call Trace: kernel: dump_stack+0x8c/0xc0 kernel: print_address_description.constprop.0+0x1b/0x210 kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: __kasan_report.cold+0x1a/0x33 kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: kasan_report+0xe/0x20 kernel: check_memory_region+0x130/0x1a0 kernel: memcpy+0x20/0x50 kernel: ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: ? __rpc_execute+0x608/0x620 [sunrpc] kernel: cma_iw_handler+0x212/0x330 [rdma_cm] kernel: ? iw_conn_req_handler+0x6e0/0x6e0 [rdma_cm] kernel: ? enqueue_timer+0x86/0x140 kernel: ? _raw_write_lock_irq+0xd0/0xd0 kernel: cm_work_handler+0xd3d/0x1070 [iw_cm] Fixes: e411e058 ("RDMA/qedr: Add iWARP connection management functions") Link: https://lore.kernel.org/r/20200616093408.17827-1-michal.kalderon@marvell.comSigned-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
David Howells authored
[ Upstream commit a2ad7c21 ] The handling of the receive window size (rwind) from a received ACK packet is not correct. The rxrpc_input_ackinfo() function currently checks the current Tx window size against the rwind from the ACK to see if it has changed, but then limits the rwind size before storing it in the tx_winsize member and, if it increased, wake up the transmitting process. This means that if rwind > RXRPC_RXTX_BUFF_SIZE - 1, this path will always be followed. Fix this by limiting rwind before we compare it to tx_winsize. The effect of this can be seen by enabling the rxrpc_rx_rwind_change tracepoint. Fixes: 702f2ac8 ("rxrpc: Wake up the transmitter if Rx window size increases on the peer") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Matthew Hagan authored
[ Upstream commit ac4e106d ] The FA2 mailbox is specified at 0x18025000 but should actually be 0x18025c00, length 0x400 according to socregs_nsp.h and board_bu.c. Also the interrupt was off by one and should be GIC SPI 151 instead of 150. Fixes: 17d51717 ("ARM: dts: NSP: Add mailbox (PDC) to NSP") Signed-off-by:
Matthew Hagan <mnhagan88@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit 95b2c3ec ] When a register patch is registered the reg_sequence is copied but the memory allocated is never freed. Add a kfree in regmap_exit to clean it up. Fixes: 22f0d90a ("regmap: Support register patch sets") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200617152129.19655-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit cc5277fe ] The callers don't expect *d_cdp to be set to an error pointer, they only check for NULL. This leads to a static checker warning: arch/x86/kernel/cpu/resctrl/rdtgroup.c:2648 __init_one_rdt_domain() warn: 'd_cdp' could be an error pointer This would not trigger a bug in this specific case because __init_one_rdt_domain() calls it with a valid domain that would not have a negative id and thus not trigger the return of the ERR_PTR(). If this was a negative domain id then the call to rdt_find_domain() in domain_add_cpu() would have returned the ERR_PTR() much earlier and the creation of the domain with an invalid id would have been prevented. Even though a bug is not triggered currently the right and safe thing to do is to set the pointer to NULL because that is what can be checked for when the caller is handling the CDP and non-CDP cases. Fixes: 52eb7433 ("x86/resctrl: Fix rdt_find_domain() return value and checks") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Reinette Chatre <reinette.chatre@intel.com> Acked-by:
Fenghua Yu <fenghua.yu@intel.com> Link: https://lkml.kernel.org/r/20200602193611.GA190851@mwandaSigned-off-by:
-
Tony Lindgren authored
[ Upstream commit 9cf28e41 ] While testing the recent suspend and resume regressions I noticed that duovero can still end up losing edge gpio interrupts on runtime suspend. This causes NFSroot easily stopping working after resume on duovero. Let's fix the issue by using gpio level interrupts for smsc as then the gpio interrupt state is seen by the gpio controller on resume. Fixes: 731b4098 ("ARM: dts: Configure duovero for to allow core retention during idle") Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Shengjiu Wang authored
[ Upstream commit ed1220df ] For mono channel, SSI will switch to Normal mode. In Normal mode and Network mode, the Word Length Control bits control the word length divider in clock generator, which is different with I2S Master mode (the word length is fixed to 32bit), it should be the value of params_width(hw_params). The condition "slots == 2" is not good for I2S Master mode, because for Network mode and Normal mode, the slots can also be 2. Then we need to use (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK) to check if it is I2S Master mode. So we refine the formula for mono channel, otherwise there will be sound issue for S24_LE. Fixes: b0a7043d ("ASoC: fsl_ssi: Caculate bit clock rate using slot number and width") Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/034eff1435ff6ce300b6c781130cefd9db22ab9a.1592276147.git.shengjiu.wang@nxp.comSigned-off-by:
-
Robin Gong authored
[ Upstream commit 6f1cf525 ] PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG and pfuze100_sw_regulator_ops. Fixes: 1dced996 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a") Reported-by:
Christophe Meynard <Christophe.Meynard@ign.fr> Signed-off-by:
Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/1592171648-8752-1-git-send-email-yibin.gong@nxp.comSigned-off-by:
-
Qiushi Wu authored
[ Upstream commit 4ddf4739 ] kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb7183" fixed a similar problem. Fixes: 0bb54905 ("efi: Add esrt support") Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit 6476b60f ] Successful send of EOS command does not indicate that EOS is actually finished, correct event to wait EOS is finished is EOS_RENDERED event. EOS_RENDERED means that the DSP has finished processing all the buffers for that particular session and stream. This patch fixes EOS handling! Fixes: 68fd8480 ("ASoC: qdsp6: q6asm: Add support to audio stream apis") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200611124159.20742-3-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Huy Nguyen authored
[ Upstream commit 94579ac3 ] During IPsec performance testing, we see bad ICMP checksum. The error packet has duplicated ESP trailer due to double validate_xmit_xfrm calls. The first call is from ip_output, but the packet cannot be sent because netif_xmit_frozen_or_stopped is true and the packet gets dev_requeue_skb. The second call is from NET_TX softirq. However after the first call, the packet already has the ESP trailer. Fix by marking the skb with XFRM_XMIT bit after the packet is handled by validate_xmit_xfrm to avoid duplicate ESP trailer insertion. Fixes: f6e27114 ("net: Add a xfrm validate function to validate_xmit_skb") Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Reviewed-by:
Boris Pismenny <borisp@mellanox.com> Reviewed-by:
Raed Salem <raeds@mellanox.com> Reviewed-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Zhang Xiaoxu authored
[ Upstream commit 6b690402 ] CIFS implements the fallocate(FALLOC_FL_ZERO_RANGE) with send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the remote file to zero, but local page cache not update, then the data inconsistent with server, which leads the xfstest generic/008 failed. So we need to remove the local page caches before send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. After next read, it will re-cache it. Fixes: 30175628 ("[SMB3] Enable fallocate -z support for SMB3 mounts") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Cc: stable@vger.kernel.org # v3.17 Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Zhang Xiaoxu authored
[ Upstream commit acc91c2d ] When punch hole success, we also can read old data from file: # strace -e trace=pread64,fallocate xfs_io -f -c "pread 20 40" \ -c "fpunch 20 40" -c"pread 20 40" file pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40 fallocate(3, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 20, 40) = 0 pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40 CIFS implements the fallocate(FALLOCATE_FL_PUNCH_HOLE) with send SMB ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the remote file to zero, but local page caches not updated, then the local page caches inconsistent with server. Also can be found by xfstests generic/316. So, we need to remove the page caches before send the SMB ioctl(FSCTL_SET_ZERO_DATA) to server. Fixes: 31742c5a ("enable fallocate punch hole ("fallocate -p") for SMB3") Suggested-by:
-
Shay Drory authored
commit 116a1b9f upstream. Currently, when RMPP MADs are processed while the MAD agent is destroyed, it could result in use after free of rmpp_recv, as decribed below: cpu-0 cpu-1 ----- ----- ib_mad_recv_done() ib_mad_complete_recv() ib_process_rmpp_recv_wc() unregister_mad_agent() ib_cancel_rmpp_recvs() cancel_delayed_work() process_rmpp_data() start_rmpp() queue_delayed_work(rmpp_recv->cleanup_work) destroy_rmpp_recv() free_rmpp_recv() cleanup_work()[1] spin_lock_irqsave(&rmpp_recv->agent->lock) <-- use after free [1] cleanup_work() == recv_cleanup_handler Fix it by waiting for the MAD agent reference count becoming zero before calling to ib_cancel_rmpp_recvs(). Fixes: 9a41e38a ("IB/mad: Use IDR for agent IDs") Link: https://lore.kernel.org/r/20200621104738.54850-2-leon@kernel.orgSigned-off-by:
Shay Drory <shayd@mellanox.com> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zheng Bin authored
commit f4bd34b1 upstream. When a filesystem is mounted on a loop device and on a loop ioctl LOOP_SET_STATUS64, because of kill_bdev, buffer_head mappings are getting destroyed. kill_bdev truncate_inode_pages truncate_inode_pages_range do_invalidatepage block_invalidatepage discard_buffer -->clear BH_Mapped flag sb_bread __bread_gfp bh = __getblk_gfp -->discard_buffer clear BH_Mapped flag __bread_slow submit_bh submit_bh_wbc BUG_ON(!buffer_mapped(bh)) --> hit this BUG_ON Fixes: 5db470e2 ("loop: drop caches if offset or block_size are changed") Signed-off-by:
Zheng Bin <zhengbin13@huawei.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Joakim Tjernlund authored
commit 03894573 upstream. USB_DEVICE(0x0424, 0x274e) can send data before cdc_acm is ready, causing garbage chars on the TTY causing stray input to the shell and/or login prompt. Signed-off-by:
Joakim Tjernlund <joakim.tjernlund@infinera.com> Cc: stable@vger.kernel.org Acked-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20200605105418.22263-1-joakim.tjernlund@infinera.comSigned-off-by:
-
Kai-Heng Feng authored
commit f0c472a6 upstream. Just return if xHCI is quirked to disable LPM. We can save some time from reading registers and doing spinlocks. Add stable tag as we want this patch together with the next one, "Poll for U0 after disabling USB2 LPM" which fixes a suspend issue for some USB2 LPM devices Cc: stable@vger.kernel.org Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200624135949.22611-5-mathias.nyman@linux.intel.comSigned-off-by:
-
Al Cooper authored
commit a73d9d9c upstream. Unable to complete the enumeration of a USB TV Tuner device. Per XHCI spec (4.6.5), the EP state field of the input context shall be cleared for a set address command. In the special case of an FS device that has "MaxPacketSize0 = 8", the Linux XHCI driver does not do this before evaluating the context. With an XHCI controller that checks the EP state field for parameter context error this causes a problem in cases such as the device getting reset again after enumeration. When that field is cleared, the problem does not occur. This was found and fixed by Sasi Kumar. Cc: stable@vger.kernel.org Signed-off-by:
Al Cooper <alcooperx@gmail.com> Signed-off-by:
-
Mathias Nyman authored
commit dceea670 upstream. EP_STATE_MASK should be 0x7 instead of 0xf xhci spec 6.2.3 shows that the EP state field in the endpoint context data structure consist of bits [2:0]. The old value included a bit from the next field which fortunately is a RsvdZ region. So hopefully this hasn't caused too much harm Cc: stable@vger.kernel.org Signed-off-by:
-
Steffen Maier authored
commit 936e6b85 upstream. Suppose that, for unrelated reasons, FSF requests on behalf of recovery are very slow and can run into the ERP timeout. In the case at hand, we did adapter recovery to a large degree. However due to the slowness a LUN open is pending so the corresponding fc_rport remains blocked. After fast_io_fail_tmo we trigger close physical port recovery for the port under which the LUN should have been opened. The new higher order port recovery dismisses the pending LUN open ERP action and dismisses the pending LUN open FSF request. Such dismissal decouples the ERP action from the pending corresponding FSF request by setting zfcp_fsf_req->erp_action to NULL (among other things) [zfcp_erp_strategy_check_fsfreq()]. If now the ERP timeout for the pending open LUN request runs out, we must not use zfcp_fsf_req->erp_action in the ERP timeout handler. This is a problem since v4.15 commit 75492a51 ("s390/scsi: Convert timers to use timer_setup()"). Before that we intentionally only passed zfcp_erp_action as context argument to zfcp_erp_timeout_handler(). Note: The lifetime of the corresponding zfcp_fsf_req object continues until a (late) response or an (unrelated) adapter recovery. Just like the regular response path ignores dismissed requests [zfcp_fsf_req_complete() => zfcp_fsf_protstatus_eval() => return early] the ERP timeout handler now needs to ignore dismissed requests. So simply return early in the ERP timeout handler if the FSF request is marked as dismissed in its status flags. To protect against the race where zfcp_erp_strategy_check_fsfreq() dismisses and sets zfcp_fsf_req->erp_action to NULL after our previous status flag check, return early if zfcp_fsf_req->erp_action is NULL. After all, the former ERP action does not need to be woken up as that was already done as part of the dismissal above [zfcp_erp_action_dismiss()]. This fixes the following panic due to kernel page fault in IRQ context: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 Fault in home space mode while using kernel ASCE. AS:000009859238c00b R2:00000e3e7ffd000b R3:00000e3e7ffcc007 S:00000e3e7ffd7000 P:000000000000013d Oops: 0004 ilc:2 [#1] SMP Modules linked in: ... CPU: 82 PID: 311273 Comm: stress Kdump: loaded Tainted: G E X ... Hardware name: IBM 8561 T01 701 (LPAR) Krnl PSW : 0404c00180000000 001fffff80549be0 (zfcp_erp_notify+0x40/0xc0 [zfcp]) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000080 00000e3d00000000 00000000000000f0 0000000000030000 000000010028e700 000000000400a39c 000000010028e700 00000e3e7cf87e02 0000000010000000 0700098591cb67f0 0000000000000000 0000000000000000 0000033840e9a000 0000000000000000 001fffe008d6bc18 001fffe008d6bbc8 Krnl Code: 001fffff80549bd4: a7180000 lhi %r1,0 001fffff80549bd8: 4120a0f0 la %r2,240(%r10) #001fffff80549bdc: a53e0003 llilh %r3,3 >001fffff80549be0: ba132000 cs %r1,%r3,0(%r2) 001fffff80549be4: a7740037 brc 7,1fffff80549c52 001fffff80549be8: e320b0180004 lg %r2,24(%r11) 001fffff80549bee: e31020e00004 lg %r1,224(%r2) 001fffff80549bf4: 412020e0 la %r2,224(%r2) Call Trace: [<001fffff80549be0>] zfcp_erp_notify+0x40/0xc0 [zfcp] [<00000985915e26f0>] call_timer_fn+0x38/0x190 [<00000985915e2944>] expire_timers+0xfc/0x190 [<00000985915e2ac4>] run_timer_softirq+0xec/0x218 [<0000098591ca7c4c>] __do_softirq+0x144/0x398 [<00000985915110aa>] do_softirq_own_stack+0x72/0x88 [<0000098591551b58>] irq_exit+0xb0/0xb8 [<0000098591510c6a>] do_IRQ+0x82/0xb0 [<0000098591ca7140>] ext_int_handler+0x128/0x12c [<0000098591722d98>] clear_subpage.constprop.13+0x38/0x60 ([<000009859172ae4c>] clear_huge_page+0xec/0x250) [<000009859177e7a2>] do_huge_pmd_anonymous_page+0x32a/0x768 [<000009859172a712>] __handle_mm_fault+0x88a/0x900 [<000009859172a860>] handle_mm_fault+0xd8/0x1b0 [<0000098591529ef6>] do_dat_exception+0x136/0x3e8 [<0000098591ca6d34>] pgm_check_handler+0x1c8/0x220 Last Breaking-Event-Address: [<001fffff80549c88>] zfcp_erp_timeout_handler+0x10/0x18 [zfcp] Kernel panic - not syncing: Fatal exception in interrupt Link: https://lore.kernel.org/r/20200623140242.98864-1-maier@linux.ibm.com Fixes: 75492a51 ("s390/scsi: Convert timers to use timer_setup()") Cc: <stable@vger.kernel.org> #4.15+ Reviewed-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Takashi Iwai authored
commit 220345e9 upstream. The USB-audio mixer code holds a linked list of usb_mixer_elem_list, and several operations are performed for each mixer element. A few of them (snd_usb_mixer_notify_id() and snd_usb_mixer_interrupt_v2()) assume each mixer element being a usb_mixer_elem_info object that is a subclass of usb_mixer_elem_list, cast via container_of() and access it members. This may result in an out-of-bound access when a non-standard list element has been added, as spotted by syzkaller recently. This patch adds a new field, is_std_info, in usb_mixer_elem_list to indicate that the element is the usb_mixer_elem_info type or not, and skip the access to such an element if needed. Reported-by: syzbot+fb14314433463ad51625@syzkaller.appspotmail.com Reported-by: syzbot+2405ca3401e943c538b5@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200624122340.9615-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Macpaul Lin authored
commit a32a1fc9 upstream. We've found Samsung USBC Headset (AKG) (VID: 0x04e8, PID: 0xa051) need a tiny delay after each class compliant request. Otherwise the device might not be able to be recognized each times. Signed-off-by:
Chihhao Chen <chihhao.chen@mediatek.com> Signed-off-by:
Macpaul Lin <macpaul.lin@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1592910203-24035-1-git-send-email-macpaul.lin@mediatek.comSigned-off-by:
-
Yick W. Tse authored
commit c9808bbf upstream. fix error "clock source 41 is not valid, cannot use" [] New USB device found, idVendor=154e, idProduct=1002, bcdDevice= 1.00 [] New USB device strings: Mfr=1, Product=2, SerialNumber=0 [] Product: DCD-1500RE [] Manufacturer: D & M Holdings Inc. [] [] clock source 41 is not valid, cannot use [] usbcore: registered new interface driver snd-usb-audio Signed-off-by:
Yick W. Tse <y_w_tse@yahoo.com.hk> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1373857985.210365.1592048406997@mail.yahoo.comSigned-off-by:
-
Li Jun authored
commit 302c570b upstream. John reported screaming irq caused by rt1711h when system boot[1], this is because irq request is done before tcpci_register_port(), so the chip->tcpci has not been setup, irq handler is entered but can't do anything, this patch is to address this by moving the irq request after tcpci_register_port(). [1] https://lore.kernel.org/linux-usb/20200530040157.31038-1-john.stultz@linaro.org Fixes: ce08eaeb ("staging: typec: rt1711h typec chip driver") Cc: stable <stable@vger.kernel.org> # v4.18+ Cc: John Stultz <john.stultz@linaro.org> Reported-and-tested-by:
John Stultz <john.stultz@linaro.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20200604112118.38062-1-jun.li@nxp.comSigned-off-by:
-
Tang Bin authored
commit 44ed240d upstream. If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ehci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 1bcc5aa8 ("USB: Add initial S5P EHCI driver") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20200602114708.28620-1-tangbin@cmss.chinamobile.comSigned-off-by:
-
Kai-Heng Feng authored
commit b3d71abd upstream. USB2 devices with LPM enabled may interrupt the system suspend: [ 932.510475] usb 1-7: usb suspend, wakeup 0 [ 932.510549] hub 1-0:1.0: hub_suspend [ 932.510581] usb usb1: bus suspend, wakeup 0 [ 932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended [ 932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended .. [ 932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03 .. [ 932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16 [ 932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16 [ 932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16 During system suspend, USB core will let HC suspends the device if it doesn't have remote wakeup enabled and doesn't have any children. However, from the log above we can see that the usb 1-7 doesn't get bus suspended due to not in U0. After a while the port finished U2 -> U0 transition, interrupts the suspend process. The observation is that after disabling LPM, port doesn't transit to U0 immediately and can linger in U2. xHCI spec 4.23.5.2 states that the maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for the affected device is advertised as 400us, which is still not enough based on my testing result. So let's use the maximum permitted latency, 10000, to poll for U0 status to solve the issue. Cc: stable@vger.kernel.org Signed-off-by:
-
Macpaul Lin authored
commit a24d5072 upstream. When runtime suspend was enabled, runtime suspend might happen when xhci is removing hcd. This might cause kernel panic when hcd has been freed but runtime pm suspend related handle need to reference it. Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Longfang Liu authored
commit 1ddcb71a upstream. A Synopsys USB2.0 core used in Huawei Kunpeng920 SoC has a bug which might cause the host controller not issuing ping. Bug description: After indicating an Interrupt on Async Advance, the software uses the doorbell mechanism to delete the Next Link queue head of the last executed queue head. At this time, the host controller still references the removed queue head(the queue head is NULL). NULL reference causes the host controller to lose the USB device. Solution: After deleting the Next Link queue head, when has_synopsys_hc_bug set to 1，the software can write one of the valid queue head addresses to the ASYNCLISTADDR register to allow the host controller to get the valid queue head. in order to solve that problem, this patch set the flag for Huawei Kunpeng920 There are detailed instructions and solutions in this patch: commit 2f7ac6c1 ("USB: ehci: add workaround for Synopsys HC bug") Signed-off-by:
Longfang Liu <liulongfang@huawei.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/1591588019-44284-1-git-send-email-liulongfang@huawei.comSigned-off-by:
-
Tomasz Meresiński authored
commit 5d802192 upstream. The Logitech C922, just like other Logitech webcams, needs the USB_QUIRK_DELAY_INIT or it will randomly not respond after device connection Signed-off-by:
Tomasz Meresiński <tomasz@meresinski.eu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200603203347.7792-1-tomasz@meresinski.euSigned-off-by:
-
Minas Harutyunyan authored
commit 207324a3 upstream. During dwc2 driver probe, after gadget registration to the udc class driver, if exist any builtin function driver it immediately bound to dwc2 and after init host side (dwc2_hcd_init()) stucked in host mode. Patch postpone gadget registration after host side initialization done. Fixes: 117777b2 ("usb: dwc2: Move gadget probe function into platform code") Reported-by:
kbuild test robot <lkp@intel.com> Tested-by:
Marek Vasut <marex@denx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/f21cb38fecc72a230b86155d94c7e60c9cb66f58.1591690938.git.hminas@synopsys.comSigned-off-by:
-
Chuhong Yuan authored
commit 07c112fb upstream. This driver misses calling iounmap() in remove to undo the ioremap() called in probe. Add the missed call to fix it. Fixes: f54aab6e ("usb: ohci-sm501 driver") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Acked-by:
-
Taehee Yoo authored
[ Upstream commit fb7861d1 ] In the current code, ->ndo_start_xmit() can be executed recursively only 10 times because of stack memory. But, in the case of the vxlan, 10 recursion limit value results in a stack overflow. In the current code, the nested interface is limited by 8 depth. There is no critical reason that the recursion limitation value should be 10. So, it would be good to be the same value with the limitation value of nesting interface depth. Test commands: ip link add vxlan10 type vxlan vni 10 dstport 4789 srcport 4789 4789 ip link set vxlan10 up ip a a 192.168.10.1/24 dev vxlan10 ip n a 192.168.10.2 dev vxlan10 lladdr fc:22:33:44:55:66 nud permanent for i in {9..0} do let A=$i+1 ip link add vxlan$i type vxlan vni $i dstport 4789 srcport 4789 4789 ip link set vxlan$i up ip a a 192.168.$i.1/24 dev vxlan$i ip n a 192.168.$i.2 dev vxlan$i lladdr fc:22:33:44:55:66 nud permanent bridge fdb add fc:22:33:44:55:66 dev vxlan$A dst 192.168.$i.2 self done hping3 192.168.10.2 -2 -d 60000 Splat looks like: [ 103.814237][ T1127] ============================================================================= [ 103.871955][ T1127] BUG kmalloc-2k (Tainted: G B ): Padding overwritten. 0x00000000897a2e4f-0x000 [ 103.873187][ T1127] ----------------------------------------------------------------------------- [ 103.873187][ T1127] [ 103.874252][ T1127] INFO: Slab 0x000000005cccc724 objects=5 used=5 fp=0x0000000000000000 flags=0x10000000001020 [ 103.881323][ T1127] CPU: 3 PID: 1127 Comm: hping3 Tainted: G B 5.7.0+ #575 [ 103.882131][ T1127] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 103.883006][ T1127] Call Trace: [ 103.883324][ T1127] dump_stack+0x96/0xdb [ 103.883716][ T1127] slab_err+0xad/0xd0 [ 103.884106][ T1127] ? _raw_spin_unlock+0x1f/0x30 [ 103.884620][ T1127] ? get_partial_node.isra.78+0x140/0x360 [ 103.885214][ T1127] slab_pad_check.part.53+0xf7/0x160 [ 103.885769][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.886316][ T1127] check_slab+0x97/0xb0 [ 103.886763][ T1127] alloc_debug_processing+0x84/0x1a0 [ 103.887308][ T1127] ___slab_alloc+0x5a5/0x630 [ 103.887765][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.888265][ T1127] ? lock_downgrade+0x730/0x730 [ 103.888762][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.889244][ T1127] ? __slab_alloc+0x3e/0x80 [ 103.889675][ T1127] __slab_alloc+0x3e/0x80 [ 103.890108][ T1127] __kmalloc_node_track_caller+0xc7/0x420 [ ... ] Fixes: 11a766ce ("net: Increase xmit RECURSION_LIMIT to 10.") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Tariq Toukan authored
[ Upstream commit 41b14fb8 ] Clearing the sock TX queue in sk_set_socket() might cause unexpected out-of-order transmit when called from sock_orphan(), as outstanding packets can pick a different TX queue and bypass the ones already queued. This is undesired in general. More specifically, it breaks the in-order scheduling property guarantee for device-offloaded TLS sockets. Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it explicitly only where needed. Fixes: e022f0b4 ("net: Introduce sk_tx_queue_mapping") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
-
guodeqing authored
[ Upstream commit 5eea3a63 ] ie., $ ifconfig eth0 6.6.6.6 netmask 255.255.255.0 $ ip rule add from 6.6.6.6 table 6666 $ ip route add 9.9.9.9 via 6.6.6.6 $ ping -I 6.6.6.6 9.9.9.9 PING 9.9.9.9 (9.9.9.9) from 6.6.6.6 : 56(84) bytes of data. 3 packets transmitted, 0 received, 100% packet loss, time 2079ms $ arp Address HWtype HWaddress Flags Mask Iface 6.6.6.6 (incomplete) eth0 The arp request address is error, this is because fib_table_lookup in fib_check_nh lookup the destnation 9.9.9.9 nexthop, the scope of the fib result is RT_SCOPE_LINK,the correct scope is RT_SCOPE_HOST. Here I add a check of whether this is RT_TABLE_MAIN to solve this problem. Fixes: 3bfd8472 ("net: Use passed in table for nexthop lookups") Signed-off-by:
guodeqing <geffrey.guo@huawei.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
[ Upstream commit 8c95eca0 ] As a further optimisation of the diffserv parsing codepath, we can skip it entirely if CAKE is configured to neither use diffserv-based classification, nor to zero out the diffserv bits. Fixes: c87b4ecd ("sch_cake: Make sure we can write the IP header before changing DSCP bits") Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit b344579c ] Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an ACK when the minimum rtt of a connection goes down. From inspection it is clear from the existing code that this could happen in an example like the following: o The first 8 RTT samples in a round trip are 150ms, resulting in a curr_rtt of 150ms and a delay_min of 150ms. o The 9th RTT sample is 100ms. The curr_rtt does not change after the first 8 samples, so curr_rtt remains 150ms. But delay_min can be lowered at any time, so delay_min falls to 100ms. The code executes the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min of 100ms, and the curr_rtt is declared far enough above delay_min to force a (spurious) exit of Slow start. The fix here is simple: allow every RTT sample in a round trip to lower the curr_rtt. Fixes: ae27e98a ("[TCP] CUBIC v2.3") Reported-by:
Mirja Kuehlewind <mirja.kuehlewind@ericsson.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
[ Upstream commit 3f608f0c ] I spotted a few nits when comparing the in-tree version of sch_cake with the out-of-tree one: A redundant error variable declaration shadowing an outer declaration, and an indentation alignment issue. Fix both of these. Fixes: 046f6fd5 ("sched: Add Common Applications Kept Enhanced (cake) qdisc") Signed-off-by:
-
