- 21 Apr, 2023 1 commit
-
-
Kuninori Morimoto authored
If CPU is using soc-generic-dmaengine-pcm, Platform Component will be same as CPU Component. In this case, we can use CPU dlc for Platform dlc. This patch shares CPU dlc with Platform, and add comment. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Tested-by:
Mark Brown <broonie@kernel.org>
-
- 20 Apr, 2023 17 commits
-
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: Last minute patch for correct the pasue/resume operation with IPC4. The issues are hardto reproduce and needs extended stress testing to be hit, in which case the audio breaks due to DMA errors.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Simplify IPC messages to avoid passing a reply structure that is not used later.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Preparation of ALC712 support with different types of SoundWire devices per link, new RaptorLake SoundWire device, better error handling for Cirrus devices and cosmetic changes for Max98373. Bard Liao (3): ASoC: Intel: sof_sdw: set codec_num = 1 if the device is not aggregated ASoC: Intel: sof_sdw: support different devices on the same sdw link ASoC: Intel: sof_sdw: append codec type to dai link name Curtis Malainey (1): ASoC: Intel: sof_cirrus_common: Guard against missing buses Yong Zhi (2): ASoC: Intel: sof_sdw: remove late_probe flag in struct sof_sdw_codec_info ASoC: Intel: sof_sdw_max98373: change sof_sdw_mx8373_late_probe to static call apoorv (1): ASoC: Intel: soc-acpi: Add entry for rt711-sdca-sdw at link 2 in RPL match table sound/soc/intel/boards/sof_cirrus_common.c | 7 +- sound/soc/intel/boards/sof_sdw.c | 181 ++++++++++++------ sound/soc/intel/boards/sof_sdw_common.h | 3 - sound/soc/intel/boards/sof_sdw_max98373.c | 22 +-- .../intel/common/soc-acpi-intel-rpl-match.c | 17 +- 5 files changed, 152 insertions(+), 78 deletions(-) -- 2.37.2 -
Simon Trimmer authored
cs35l56_mbox_send() logs a warning when sending a mbox command fails so the callers can be simplified. Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230420102043.1151830-1-rf@opensource.cirrus.comSigned-off-by:
-
Mark Brown authored
The es8316 driver uses a register range to specify the single volatile register it has. While the cost will be in the noise this is a bunch of overhead compared to just having a volatile_reg() callback so switch to the callback. Signed-off-by:
-
Ranjani Sridharan authored
Suspending to S0iX with IPC3 requires the PM_GATE IPC to be sent again to stop the DMA trace. But with IPC4, this is not needed as the trace is stopped with the LARGE_CONFIG_SET IPC. Also, sending the MOD_D0IX IPC to set the D0I3 state again when the DSP is in D0I3 already results in an imbalance in PM runtime states in the firmware. So split the set_power_state ops for IPC3 and IPC4 to avoid sending the MOD_D0IX IPC when the DSP is already in D0I3 with IPC4. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Ranjani Sridharan authored
In the case of IPC4, a pipeline is only paused during STOP/PAUSE/SUSPEND triggers and the FW keeps the host DMA running when a pipeline is paused. The start/stop tests iterate through STOP/START triggers without involving a hw_free. This means that the pipeline state will only toggle between PAUSED (during the STOP trigger) and RUNNING (during the START trigger). So this test should be treated in the same way as a PAUSE_PUSH/PAUSE_RELEASE test and the DMA should be kept running when toggling the pipeline states between PAUSED and RUNNING. Since there is no way to tell if a STOP trigger will be followed by hw_free or not, this patch proposes to always skip DMA stop during the STOP trigger and handle it later during hw_free. Introduce a new flag in struct sof_ipc_pcm_ops, delayed_platform_trigger, that will be used to ensure that the host DMA will not be stopped during the STOP/PAUSE/RELEASE triggers and set it for IPC4. The platform_trigger call to stop the DMA will be invoked during PCM hw_free instead when the pipeline is reset. Signed-off-by:
-
Ranjani Sridharan authored
The FW does not pause/stop the host DMA during pause and stopping the host DMA from the driver could result in an unknown behaviour. So, skip triggering the HD-Audio host DMA during pause/release. Signed-off-by:
-
Bard Liao authored
The existing sdw_sof machine driver constructs two SoundWire interfaces by direction and sdw link id. It means that we will have exactly the same dai link name if two dai links are on the same sdw link with the same direction. The new Realtek codec has two SoundWire interfaces for jack and DMIC functions and they are treated as different codecs. To create two dai links for jack and DMIC, we need to have different dai link names. This patch suggests to append codec type if there are two or more different types of devices on the same sdw bus. Signed-off-by:
-
Bard Liao authored
The existing code assumes all devices on the same soundwire link are the same devices. eg. all rt1316. This commit removes the assumption and supports different devices on the same soundwire link. Signed-off-by:
-
Bard Liao authored
We assume adr_link->num_adr = 1 if a device is not aggregated. However, the assumption is not valid if there are different type devices on the same soundwire link. Signed-off-by:
-
Yong Zhi authored
sof_sdw_mx8373_late_probe is only used in sof_sdw_max98373, so it should be static and rename it to 'mx8373_sdw_late_probe'. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
-
Yong Zhi authored
Just use codec_card_late_probe ptr in struct sof_sdw_codec_info for validation check and drop late_probe variable. Signed-off-by:
-
apoorv authored
RT711 sdca sdw is added with SDW2 link for RPL-P CRB platform. Signed-off-by:
apoorv <apoorv@intel.com> Signed-off-by:
-
Curtis Malainey authored
Even if we find a acpi device we can still be missing the physical node. Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
-
Curtis Malainey authored
Convert all existing calls that pass "NULL, 0" for reply data to the new no_reply calls. Also convert any calls that pass in data but don't actually parse the result. Signed-off-by:
-
Curtis Malainey authored
95% of the calls inside SOF to TX an IPC don't care about a reply. Yet the previous commit cleaned up a bunch of replies that were being populated and then thrown away. This adds some functions so users who do not need replies don't feel obligated to provide the space to the API. Signed-off-by:
-
- 19 Apr, 2023 2 commits
-
-
Shengjiu Wang authored
This reverts commit 33683cbf ("ASoC: fsl: remove unnecessary dai_link->platform"). dai_link->platform is needed. The platform component is "snd_dmaengine_pcm", which is registered from cpu driver, If dai_link->platform is not assigned, then platform component will not be probed, then there will be issue: aplay: main:831: audio open error: Invalid argument Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1681900158-17428-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Christophe JAILLET authored
dev_err_probe() already display the error code. There is no need to duplicate it explicitly in the error message. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Iuliana Prodan <iuliana.prodan@nxp.com> Acked-by:
-
- 18 Apr, 2023 12 commits
-
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: These patches make some small changes to align with the B0 silicon revision.
-
Richard Fitzgerald authored
Rename the mixer source defines from CS35L56_INPUT_SRC_SWIRE_RXn to CS35L56_INPUT_SRC_SWIRE_DP1_CHANNELn to match the latest datasheet. Signed-off-by:
-
Richard Fitzgerald authored
The mixer source index value for SDW2RX1 is different between A1 and B0 silicon. As the driver doesn't provide a DAI for SDW2 just remove it as a mixer source option. Signed-off-by:
-
Richard Fitzgerald authored
Reduce SDW1 to 4 channels and remove the controls for SDW1 TX5 and TX6. The TX5 and TX6 channels have been removed from B0 silicon. There is no need to support them on A1 silicon. Signed-off-by:
-
Richard Fitzgerald authored
EINT20 contains wake-source interrupts and also interface-blocked interrupts, which all default to unmasked after reset or wake. The comment in cs35l56_init() only mentioned the wake interrupts. Update the comment so it's clear that it's intentional to also mask the *_BLOCKED interrupts. Signed-off-by:
-
Krzysztof Kozlowski authored
Replace dev_err() in probe() path with dev_err_probe() to: 1. Make code a bit simpler and easier to read, 2. Do not print messages on deferred probe. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230418074630.8681-4-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The probe already stores pointer to &pdev->dev, so use it to make the code a bit easier to read. Signed-off-by:
-
Krzysztof Kozlowski authored
Replace dev_err() in probe() path with dev_err_probe() to: 1. Make code a bit simpler and easier to read, 2. Do not print messages on deferred probe. Signed-off-by:
-
Saalim Quadri authored
Convert the WM8728 audio CODEC bindings to DT schema Signed-off-by:
Saalim Quadri <danascape@gmail.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230417204323.137681-1-danascape@gmail.comSigned-off-by:
-
Tom Rix authored
clang build reports sound/soc/codecs/nau8825.c:2826:31: error: overlapping comparisons always evaluate to false [-Werror,-Wtautological-overlap-compare] if (nau8825->adc_delay < 125 && nau8825->adc_delay > 500) ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ This is a bug, a logical-or should have been used. Fixes: fc0b096c ("ASoC: nau8825: Add delay control for input path") Signed-off-by:Tom Rix <trix@redhat.com> Acked-by:
David Lin <CTLIN0@nuvoton.com> Link: https://lore.kernel.org/r/20230418120955.3230705-1-trix@redhat.comSigned-off-by:
-
Krzysztof Kozlowski authored
Code can be a bit simpler with dev_err_probe(). Signed-off-by:
-
Saalim Quadri authored
Convert the WM8737 audio CODEC bindings to DT schema Signed-off-by:
-
- 17 Apr, 2023 8 commits
-
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: Various code improvements. These remove redundant code and clean up less-than-optimal original implementations.
-
Liliang Ye authored
of_node_put() should have been done directly after mqs_priv->regmap = syscon_node_to_regmap(gpr_np); otherwise it creates a reference leak on the success path. To fix this, of_node_put() is moved to the correct location, and change all the gotos to direct returns. Fixes: a9d27367 ("ASoC: fsl_mqs: Fix error handling in probe") Signed-off-by:
Liliang Ye <yll@hust.edu.cn> Reviewed-by:
Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/20230403152647.17638-1-yll@hust.edu.cnSigned-off-by:
-
Mark Brown authored
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: ASoC is using many type of mutex lock, but some of them has helper function, but some doesn't. Or, it has helper function, but is static. This patch-set adds helper function and use it.
-
Kuninori Morimoto authored
ASoC need to use card->mutex with _INIT or _RUNTIME, but there is no helper function for it. This patch adds its helper function and use it. Because people might misunderstand that _init() is mutex initialization, this patch renames _INIT to _ROOT and adds new snd_soc_card_mutex_lock_root() for it. Signed-off-by:
-
Kuninori Morimoto authored
soc-pcm.c has snd_soc_dpcm_mutex_lock/unlock(), but other files can't use it because it is static function. It requests snd_soc_pcm_runtime as parameter (A), but sometimes we want to use it by snd_soc_card (B). (A) static inline void snd_soc_dpcm_mutex_lock(struct snd_soc_pcm_runtime *rtd) { mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass); } ^^^^^^^^^ (B) mutex_lock_nested(&card->pcm_mutex, card->pcm_subclass); ^^^^ We want to use it with both "rtd" and "card" for dapm lock/unlock. To enable it, this patch uses _Generic macro. This patch makes snd_soc_dpcm_mutex_{un}lock() global function, and use it on each files. Signed-off-by: -
Kuninori Morimoto authored
soc.h has snd_soc_dapm_mutex_lock/unlock() definition and many drivers are using it, but soc-dapm.c is not. 1st reason is snd_soc_dapm_mutex_lock/unlock() requests snd_soc_dapm_context pointer as parameter (A), but sometimes soc-dapm.c needs to use snd_soc_card (B). (A) static inline void snd_soc_dapm_mutex_lock(struct snd_soc_dapm_context *dapm) { mutex_lock_nested(&dapm->card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); } ^^^^^^^^^^ (B) mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); ^^^^ 2nd reason is it want to use SND_SOC_DAPM_CLASS_INIT for mutex_lock_nested(), but helper is using _RUNTIME (A). The conclusion is we want to use "dapm vs card" and "_RUNTIME vs _INIT" for dapm lock/unlock. To enable this selfish request, this patch uses _Generic macro. We can use snd_soc_dapm_mutex_lock/unlock() for both dapm and card case. snd_soc_dapm_mutex_lock(dapm); snd_soc_dapm_mutex_unlock(dapm); snd_soc_dapm_mutex_lock(card); snd_soc_dapm_mutex_unlock(card); Current soc-dapm.c is using both mutex_lock() and mutex_lock_nested(). This patch handles mutex_lock() as mutex_lock_nested(..., 0), in other words, handles below as same. mutex_lock(&card->dapm_mutex); mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_INIT); Because people might misunderstand that _init() is mutex initialization, this patch renames _INIT to _ROOT and adds new snd_soc_dapm_mutex_lock_root() for it. This patch also moves snd_soc_dapm_subclass definition from soc-dapm.h to soc.h to keep related code together. Because very complex soc.h vs soc-dapm.h relationship, it is difficult/impossible to define these helper into soc-dapm.h. Signed-off-by: -
Saalim Quadri authored
Convert the WM8753 audio codec bindings to DT schema. Signed-off-by:
-
Paweł Anikiel authored
The SSM260x chips have an internal MCLK /2 divider (bit D7 in register R8). Add logic that allows for more MCLK values using this divider. Signed-off-by:
Paweł Anikiel <pan@semihalf.com> Link: https://lore.kernel.org/r/20230414140203.707729-7-pan@semihalf.comSigned-off-by:
-
