GCC seems to incorrectly fail to evaluate skb_ext_total_length() at
compile time under certain conditions.

The issue even occurs if all values in skb_ext_type_len[] are "0",
ruling out the possibility of an actual overflow.

As the patch has been in mainline since v6.6 without triggering the
problem it seems to be a very uncommon occurrence.

As the issue only occurs when -fno-tree-loop-im is specified as part of
CFLAGS_GCOV, disable the BUILD_BUG_ON() only when building with coverage
reporting enabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312171924.4FozI5FG-lkp@intel.com/Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/487cfd35-fe68-416f-9bfd-6bb417f98304@app.fastmail.com/
Fixes: 5d21d0a6 ("net: generalize calculation of skb extensions length")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231218-net-skbuff-build-bug-v1-1-eefc2fb0a7d3@weissschuh.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In order to avoid a NULL pointer dereference, check entry->buf pointer before running
skb_free_frag in mtk_wed_wo_queue_tx_clean routine.

Fixes: 79968444 ("net: ethernet: mtk_wed: introduce wed wo support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/3c1262464d215faa8acebfc08869798c81c96f4a.1702827359.git.lorenzo@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The driver should continue get the timestamp if STMMAC_FLAG_EXT_SNAPSHOT_EN
flag is set.

Fixes: aa5513f5 ("net: stmmac: replace the ext_snapshot_en field with a flag")
Cc: <stable@vger.kernel.org> # 6.6
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Add encryption key size check when acting as peripheral
 - Shut up false-positive build warning
 - Send reject if L2CAP command request is corrupted
 - Fix Use-After-Free in bt_sock_recvmsg
 - Fix not notifying when connection encryption changes
 - Fix not checking if HCI_OP_INQUIRY has been sent
 - Fix address type send over to the MGMT interface
 - Fix deadlock in vhci_send_frame
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Liu Jian says:

====================
check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()

v2->v3:
	Filter using vlan_hw_filter_capable().
	Add one basic test.
====================

Link: https://lore.kernel.org/r/20231216075219.2379123-1-liujian56@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add one basic vlan hw filter test.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

I got the below warning trace:

WARNING: CPU: 4 PID: 4056 at net/core/dev.c:11066 unregister_netdevice_many_notify
CPU: 4 PID: 4056 Comm: ip Not tainted 6.7.0-rc4+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify+0x9a4/0x9b0
Call Trace:
 rtnl_dellink
 rtnetlink_rcv_msg
 netlink_rcv_skb
 netlink_unicast
 netlink_sendmsg
 __sock_sendmsg
 ____sys_sendmsg
 ___sys_sendmsg
 __sys_sendmsg
 do_syscall_64
 entry_SYSCALL_64_after_hwframe

It can be repoduced via:

    ip netns add ns1
    ip netns exec ns1 ip link add bond0 type bond mode 0
    ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
    ip netns exec ns1 ip link set bond_slave_1 master bond0
[1] ip netns exec ns1 ethtool -K bond0 rx-vlan-filter off
[2] ip netns exec ns1 ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0
[3] ip netns exec ns1 ip link add link bond0 name bond0.0 type vlan id 0
[4] ip netns exec ns1 ip link set bond_slave_1 nomaster
[5] ip netns exec ns1 ip link del veth2
    ip netns del ns1

This is all caused by command [1] turning off the rx-vlan-filter function
of bond0. The reason is the same as commit 01f4fd27 ("bonding: Fix
incorrect deletion of ETH_P_8021AD protocol vid from slaves"). Commands
[2] [3] add the same vid to slave and master respectively, causing
command [4] to empty slave->vlan_info. The following command [5] triggers
this problem.

To fix this problem, we should add VLAN_FILTER feature checks in
vlan_vids_add_by_dev() and vlan_vids_del_by_dev() to prevent incorrect
addition or deletion of vlan_vid information.

Fixes: 348a1443 ("vlan: introduce functions to do mass addition/deletion of vids by another device")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Jijie Shao will be responsible for
maintaining the hns3 driver's code in the future,
so add Jijie to the hns3 driver's matainer list.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20231216070413.233668-1-shaojijie@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Mana uses PAGE_POOL API. x86_64 defconfig doesn't select it:

ld: vmlinux.o: in function `mana_create_page_pool.isra.0':
mana_en.c:(.text+0x9ae36f): undefined reference to `page_pool_create'
ld: vmlinux.o: in function `mana_get_rxfrag':
mana_en.c:(.text+0x9afed1): undefined reference to `page_pool_alloc_pages'
make[3]: *** [/home/yury/work/linux/scripts/Makefile.vmlinux:37: vmlinux] Error 1
make[2]: *** [/home/yury/work/linux/Makefile:1154: vmlinux] Error 2
make[1]: *** [/home/yury/work/linux/Makefile:234: __sub-make] Error 2
make[1]: Leaving directory '/home/yury/work/build-linux-x86_64'
make: *** [Makefile:234: __sub-make] Error 2

So we need to select it explicitly.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter")
Link: https://lore.kernel.org/r/20231215203353.635379-1-yury.norov@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

There is a bug in the ks8851 Ethernet driver that more data is written
to the hardware TX buffer than actually available. This is caused by
wrong accounting of the free TX buffer space.

The driver maintains a tx_space variable that represents the TX buffer
space that is deemed to be free. The ks8851_start_xmit_spi() function
adds an SKB to a queue if tx_space is large enough and reduces tx_space
by the amount of buffer space it will later need in the TX buffer and
then schedules a work item. If there is not enough space then the TX
queue is stopped.

The worker function ks8851_tx_work() dequeues all the SKBs and writes
the data into the hardware TX buffer. The last packet will trigger an
interrupt after it was send. Here it is assumed that all data fits into
the TX buffer.

In the interrupt routine (which runs asynchronously because it is a
threaded interrupt) tx_space is updated with the current value from the
hardware. Also the TX queue is woken up again.

Now it could happen that after data was sent to the hardware and before
handling the TX interrupt new data is queued in ks8851_start_xmit_spi()
when the TX buffer space had still some space left. When the interrupt
is actually handled tx_space is updated from the hardware but now we
already have new SKBs queued that have not been written to the hardware
TX buffer yet. Since tx_space has been overwritten by the value from the
hardware the space is not accounted for.

Now we have more data queued then buffer space available in the hardware
and ks8851_tx_work() will potentially overrun the hardware TX buffer. In
many cases it will still work because often the buffer is written out
fast enough so that no overrun occurs but for example if the peer
throttles us via flow control then an overrun may happen.

This can be fixed in different ways. The most simple way would be to set
tx_space to 0 before writing data to the hardware TX buffer preventing
the queuing of more SKBs until the TX interrupt has been handled. I have
chosen a slightly more efficient (and still rather simple) way and
track the amount of data that is already queued and not yet written to
the hardware. When new SKBs are to be queued the already queued amount
of data is honoured when checking free TX buffer space.

I tested this with a setup of two linked KS8851 running iperf3 between
the two in bidirectional mode. Before the fix I got a stall after some
minutes. With the fix I saw now issues anymore after hours.

Fixes: 3ba81f3e ("net: Micrel KS8851 SPI network driver")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231214181112.76052-1-rwahl@gmx.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Matthieu Baerts says:

====================
mptcp: misc. fixes for v6.7

Here are a few fixes related to MPTCP:

Patch 1 avoids skipping some subtests of the MPTCP Join selftest by
mistake when using older versions of GCC. This fixes a patch introduced
in v6.4, backported up to v6.1.

Patch 2 fixes an inconsistent state when using MPTCP + FastOpen. A fix
for v6.2.

Patch 3 adds a description for MPTCP Kunit test modules to avoid a
warning.

Patch 4 adds an entry to the mailmap file for Geliang's email addresses.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>

Map Geliang's old mail addresses to his @linux.dev one.
Suggested-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

W=1 builds warn on missing MODULE_DESCRIPTION, add them here in MPTCP.

Only two were missing: two modules with different KUnit tests for MPTCP.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The netlink PM can race with fastopen self-connect attempts, shutting
down the first subflow via:

MPTCP_PM_CMD_DEL_ADDR -> mptcp_nl_remove_id_zero_address ->
  mptcp_pm_nl_rm_subflow_received -> mptcp_close_ssk

and transitioning such subflow to FIN_WAIT1 status before the syn-ack
packet is processed. The MPTCP code does not react to such state change,
leaving the connection in not-fallback status and the subflow handshake
uncompleted, triggering the following splat:

  WARNING: CPU: 0 PID: 10630 at net/mptcp/subflow.c:1405 subflow_data_ready+0x39f/0x690 net/mptcp/subflow.c:1405
  Modules linked in:
  CPU: 0 PID: 10630 Comm: kworker/u4:11 Not tainted 6.6.0-syzkaller-14500-g1c410411 #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
  Workqueue: bat_events batadv_nc_worker
  RIP: 0010:subflow_data_ready+0x39f/0x690 net/mptcp/subflow.c:1405
  Code: 18 89 ee e8 e3 d2 21 f7 40 84 ed 75 1f e8 a9 d7 21 f7 44 89 fe bf 07 00 00 00 e8 0c d3 21 f7 41 83 ff 07 74 07 e8 91 d7 21 f7 <0f> 0b e8 8a d7 21 f7 48 89 df e8 d2 b2 ff ff 31 ff 89 c5 89 c6 e8
  RSP: 0018:ffffc90000007448 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff888031efc700 RCX: ffffffff8a65baf4
  RDX: ffff888043222140 RSI: ffffffff8a65baff RDI: 0000000000000005
  RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007
  R10: 000000000000000b R11: 0000000000000000 R12: 1ffff92000000e89
  R13: ffff88807a534d80 R14: ffff888021c11a00 R15: 000000000000000b
  FS:  0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fa19a0ffc81 CR3: 000000007a2db000 CR4: 00000000003506f0
  DR0: 000000000000d8dd DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Call Trace:
   <IRQ>
   tcp_data_ready+0x14c/0x5b0 net/ipv4/tcp_input.c:5128
   tcp_data_queue+0x19c3/0x5190 net/ipv4/tcp_input.c:5208
   tcp_rcv_state_process+0x11ef/0x4e10 net/ipv4/tcp_input.c:6844
   tcp_v4_do_rcv+0x369/0xa10 net/ipv4/tcp_ipv4.c:1929
   tcp_v4_rcv+0x3888/0x3b30 net/ipv4/tcp_ipv4.c:2329
   ip_protocol_deliver_rcu+0x9f/0x480 net/ipv4/ip_input.c:205
   ip_local_deliver_finish+0x2e4/0x510 net/ipv4/ip_input.c:233
   NF_HOOK include/linux/netfilter.h:314 [inline]
   NF_HOOK include/linux/netfilter.h:308 [inline]
   ip_local_deliver+0x1b6/0x550 net/ipv4/ip_input.c:254
   dst_input include/net/dst.h:461 [inline]
   ip_rcv_finish+0x1c4/0x2e0 net/ipv4/ip_input.c:449
   NF_HOOK include/linux/netfilter.h:314 [inline]
   NF_HOOK include/linux/netfilter.h:308 [inline]
   ip_rcv+0xce/0x440 net/ipv4/ip_input.c:569
   __netif_receive_skb_one_core+0x115/0x180 net/core/dev.c:5527
   __netif_receive_skb+0x1f/0x1b0 net/core/dev.c:5641
   process_backlog+0x101/0x6b0 net/core/dev.c:5969
   __napi_poll.constprop.0+0xb4/0x540 net/core/dev.c:6531
   napi_poll net/core/dev.c:6600 [inline]
   net_rx_action+0x956/0xe90 net/core/dev.c:6733
   __do_softirq+0x21a/0x968 kernel/softirq.c:553
   do_softirq kernel/softirq.c:454 [inline]
   do_softirq+0xaa/0xe0 kernel/softirq.c:441
   </IRQ>
   <TASK>
   __local_bh_enable_ip+0xf8/0x120 kernel/softirq.c:381
   spin_unlock_bh include/linux/spinlock.h:396 [inline]
   batadv_nc_purge_paths+0x1ce/0x3c0 net/batman-adv/network-coding.c:471
   batadv_nc_worker+0x9b1/0x10e0 net/batman-adv/network-coding.c:722
   process_one_work+0x884/0x15c0 kernel/workqueue.c:2630
   process_scheduled_works kernel/workqueue.c:2703 [inline]
   worker_thread+0x8b9/0x1290 kernel/workqueue.c:2784
   kthread+0x33c/0x440 kernel/kthread.c:388
   ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
   ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
   </TASK>

To address the issue, catch the racing subflow state change and
use it to cause the MPTCP fallback. Such fallback is also used to
cause the first subflow state propagation to the msk socket via
mptcp_set_connected(). After this change, the first subflow can
additionally propagate the TCP_FIN_WAIT1 state, so rename the
helper accordingly.

Finally, if the state propagation is delayed to the msk release
callback, the first subflow can change to a different state in between.
Cache the relevant target state in a new msk-level field and use
such value to update the msk state at release time.

Fixes: 1e777f39 ("mptcp: add MSG_FASTOPEN sendmsg flag support")
Cc: stable@vger.kernel.org
Reported-by: <syzbot+c53d4d3ddb327e80bc51@syzkaller.appspotmail.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/458Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

MPC backups tests will skip unexpected sometimes (For example, when
compiling kernel with an older version of gcc, such as gcc-8), since
static functions like mptcp_subflow_send_ack also be listed in
/proc/kallsyms, with a 't' in front of it, not 'T' ('T' is for a global
function):

 > grep "mptcp_subflow_send_ack" /proc/kallsyms

 0000000000000000 T __pfx___mptcp_subflow_send_ack
 0000000000000000 T __mptcp_subflow_send_ack
 0000000000000000 t __pfx_mptcp_subflow_send_ack
 0000000000000000 t mptcp_subflow_send_ack

In this case, mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"
will be false, MPC backups tests will skip. This is not what we expected.

The correct logic here should be: if mptcp_subflow_send_ack is not a
global function in /proc/kallsyms, do these MPC backups tests. So a 'T'
must be added in front of mptcp_subflow_send_ack.

Fixes: 632978f0 ("selftests: mptcp: join: skip MPC backups tests if not supported")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Calling led_trigger_register() when attaching a PHY located on an SFP
module potentially (and practically) leads into a deadlock.
Fix this by not calling led_trigger_register() for PHYs localted on SFP
modules as such modules actually never got any LEDs.

======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc4-next-20231208+ #0 Tainted: G           O
------------------------------------------------------
kworker/u8:2/43 is trying to acquire lock:
ffffffc08108c4e8 (triggers_list_lock){++++}-{3:3}, at: led_trigger_register+0x4c/0x1a8

but task is already holding lock:
ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&sfp->sm_mutex){+.+.}-{3:3}:
       __mutex_lock+0x88/0x7a0
       mutex_lock_nested+0x20/0x28
       cleanup_module+0x2ae0/0x3120 [sfp]
       sfp_register_bus+0x5c/0x9c
       sfp_register_socket+0x48/0xd4
       cleanup_module+0x271c/0x3120 [sfp]
       platform_probe+0x64/0xb8
       really_probe+0x17c/0x3c0
       __driver_probe_device+0x78/0x164
       driver_probe_device+0x3c/0xd4
       __driver_attach+0xec/0x1f0
       bus_for_each_dev+0x60/0xa0
       driver_attach+0x20/0x28
       bus_add_driver+0x108/0x208
       driver_register+0x5c/0x118
       __platform_driver_register+0x24/0x2c
       init_module+0x28/0xa7c [sfp]
       do_one_initcall+0x70/0x2ec
       do_init_module+0x54/0x1e4
       load_module+0x1b78/0x1c8c
       __do_sys_init_module+0x1bc/0x2cc
       __arm64_sys_init_module+0x18/0x20
       invoke_syscall.constprop.0+0x4c/0xdc
       do_el0_svc+0x3c/0xbc
       el0_svc+0x34/0x80
       el0t_64_sync_handler+0xf8/0x124
       el0t_64_sync+0x150/0x154

-> #2 (rtnl_mutex){+.+.}-{3:3}:
       __mutex_lock+0x88/0x7a0
       mutex_lock_nested+0x20/0x28
       rtnl_lock+0x18/0x20
       set_device_name+0x30/0x130
       netdev_trig_activate+0x13c/0x1ac
       led_trigger_set+0x118/0x234
       led_trigger_write+0x104/0x17c
       sysfs_kf_bin_write+0x64/0x80
       kernfs_fop_write_iter+0x128/0x1b4
       vfs_write+0x178/0x2a4
       ksys_write+0x58/0xd4
       __arm64_sys_write+0x18/0x20
       invoke_syscall.constprop.0+0x4c/0xdc
       do_el0_svc+0x3c/0xbc
       el0_svc+0x34/0x80
       el0t_64_sync_handler+0xf8/0x124
       el0t_64_sync+0x150/0x154

-> #1 (&led_cdev->trigger_lock){++++}-{3:3}:
       down_write+0x4c/0x13c
       led_trigger_write+0xf8/0x17c
       sysfs_kf_bin_write+0x64/0x80
       kernfs_fop_write_iter+0x128/0x1b4
       vfs_write+0x178/0x2a4
       ksys_write+0x58/0xd4
       __arm64_sys_write+0x18/0x20
       invoke_syscall.constprop.0+0x4c/0xdc
       do_el0_svc+0x3c/0xbc
       el0_svc+0x34/0x80
       el0t_64_sync_handler+0xf8/0x124
       el0t_64_sync+0x150/0x154

-> #0 (triggers_list_lock){++++}-{3:3}:
       __lock_acquire+0x12a0/0x2014
       lock_acquire+0x100/0x2ac
       down_write+0x4c/0x13c
       led_trigger_register+0x4c/0x1a8
       phy_led_triggers_register+0x9c/0x214
       phy_attach_direct+0x154/0x36c
       phylink_attach_phy+0x30/0x60
       phylink_sfp_connect_phy+0x140/0x510
       sfp_add_phy+0x34/0x50
       init_module+0x15c/0xa7c [sfp]
       cleanup_module+0x1d94/0x3120 [sfp]
       cleanup_module+0x2bb4/0x3120 [sfp]
       process_one_work+0x1f8/0x4ec
       worker_thread+0x1e8/0x3d8
       kthread+0x104/0x110
       ret_from_fork+0x10/0x20

other info that might help us debug this:

Chain exists of:
  triggers_list_lock --> rtnl_mutex --> &sfp->sm_mutex

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&sfp->sm_mutex);
                               lock(rtnl_mutex);
                               lock(&sfp->sm_mutex);
  lock(triggers_list_lock);

 *** DEADLOCK ***

4 locks held by kworker/u8:2/43:
 #0: ffffff80c000f938 ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
 #1: ffffffc08214bde8 ((work_completion)(&(&sfp->timeout)->work)){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
 #2: ffffffc0810902f8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x18/0x20
 #3: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]

stack backtrace:
CPU: 0 PID: 43 Comm: kworker/u8:2 Tainted: G           O       6.7.0-rc4-next-20231208+ #0
Hardware name: Bananapi BPI-R4 (DT)
Workqueue: events_power_efficient cleanup_module [sfp]
Call trace:
 dump_backtrace+0xa8/0x10c
 show_stack+0x14/0x1c
 dump_stack_lvl+0x5c/0xa0
 dump_stack+0x14/0x1c
 print_circular_bug+0x328/0x430
 check_noncircular+0x124/0x134
 __lock_acquire+0x12a0/0x2014
 lock_acquire+0x100/0x2ac
 down_write+0x4c/0x13c
 led_trigger_register+0x4c/0x1a8
 phy_led_triggers_register+0x9c/0x214
 phy_attach_direct+0x154/0x36c
 phylink_attach_phy+0x30/0x60
 phylink_sfp_connect_phy+0x140/0x510
 sfp_add_phy+0x34/0x50
 init_module+0x15c/0xa7c [sfp]
 cleanup_module+0x1d94/0x3120 [sfp]
 cleanup_module+0x2bb4/0x3120 [sfp]
 process_one_work+0x1f8/0x4ec
 worker_thread+0x1e8/0x3d8
 kthread+0x104/0x110
 ret_from_fork+0x10/0x20
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fixes: 01e5b728 ("net: phy: Add a binding for PHY LEDs")
Link: https://lore.kernel.org/r/102a9dce38bdf00215735d04cd4704458273ad9c.1702339354.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove double-mapping of DMA buffers as it can prevent page pool entries
from being freed.  Mapping is managed by page pool infrastructure and
was previously managed by the driver in __bnxt_alloc_rx_page before
allowing the page pool infrastructure to manage it.

Fixes: 578fcfd2 ("bnxt_en: Let the page pool manage the DMA mapping")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20231214213138.98095-1-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This can cause a race with bt_sock_ioctl() because
bt_sock_recvmsg() gets the skb from sk->sk_receive_queue
and then frees it without holding lock_sock.
A use-after-free for a skb occurs with the following flow.
```
bt_sock_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
bt_sock_ioctl() -> skb_peek()
```
Add lock_sock to bt_sock_recvmsg() to fix this issue.

Cc: stable@vger.kernel.org
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

When we are slave role and receives l2cap conn req when encryption has
started, we should check the enc key size to avoid KNOB attack or BLUFFS
attack.
From SIG recommendation, implementations are advised to reject
service-level connections on an encrypted baseband link with key
strengths below 7 octets.
A simple and clear way to achieve this is to place the enc key size
check in hci_cc_read_enc_key_size()

The btmon log below shows the case that lacks enc key size check.

> HCI Event: Connect Request (0x04) plen 10
        Address: BB:22:33:44:55:99 (OUI BB-22-33)
        Class: 0x480104
          Major class: Computer (desktop, notebook, PDA, organizers)
          Minor class: Desktop workstation
          Capturing (Scanner, Microphone)
          Telephony (Cordless telephony, Modem, Headset)
        Link type: ACL (0x01)
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
        Address: BB:22:33:44:55:99 (OUI BB-22-33)
        Role: Peripheral (0x01)
> HCI Event: Command Status (0x0f) plen 4
      Accept Connection Request (0x01|0x0009) ncmd 2
        Status: Success (0x00)
> HCI Event: Connect Complete (0x03) plen 11
        Status: Success (0x00)
        Handle: 1
        Address: BB:22:33:44:55:99 (OUI BB-22-33)
        Link type: ACL (0x01)
        Encryption: Disabled (0x00)
...

> HCI Event: Encryption Change (0x08) plen 4
        Status: Success (0x00)
        Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
        Encryption: Enabled with E0 (0x01)
< HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2
        Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
> HCI Event: Command Complete (0x0e) plen 7
      Read Encryption Key Size (0x05|0x0008) ncmd 2
        Status: Success (0x00)
        Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
        Key size: 6
// We should check the enc key size
...

> ACL Data RX: Handle 1 flags 0x02 dlen 12
      L2CAP: Connection Request (0x02) ident 3 len 4
        PSM: 25 (0x0019)
        Source CID: 64
< ACL Data TX: Handle 1 flags 0x00 dlen 16
      L2CAP: Connection Response (0x03) ident 3 len 8
        Destination CID: 64
        Source CID: 64
        Result: Connection pending (0x0001)
        Status: Authorization pending (0x0002)
> HCI Event: Number of Completed Packets (0x13) plen 5
        Num handles: 1
        Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
        Count: 1
        #35: len 16 (25 Kb/s)
        Latency: 5 msec (2-7 msec ~4 msec)
< ACL Data TX: Handle 1 flags 0x00 dlen 16
      L2CAP: Connection Response (0x03) ident 3 len 8
        Destination CID: 64
        Source CID: 64
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)

Cc: stable@vger.kernel.org
Signed-off-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

If two Bluetooth devices both support BR/EDR and BLE, and also
support Secure Connections, then they only need to pair once.
The LTK generated during the LE pairing process may be converted
into a BR/EDR link key for BR/EDR transport, and conversely, a
link key generated during the BR/EDR SSP pairing process can be
converted into an LTK for LE transport. Hence, the link type of
the link key and LTK is not fixed, they can be either an LE LINK
or an ACL LINK.

Currently, in the mgmt_new_irk/ltk/crsk/link_key functions, the
link type is fixed, which could lead to incorrect address types
being reported to the application layer. Therefore, it is necessary
to add link_type/addr_type to the smp_irk/ltk/crsk and link_key,
to ensure the generation of the correct address type.

SMP over BREDR:
Before Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
        BR/EDR SMP: Identity Address Information (0x09) len 7
        Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 00:00:00:00:00:00 (Non-Resolvable)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)

After Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
      BR/EDR SMP: Identity Address Information (0x09) len 7
        Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 00:00:00:00:00:00 (Non-Resolvable)
        BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)

SMP over LE:
Before Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 5F:5C:07:37:47:D5 (Resolvable)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
        BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated Combination key from P-256 (0x08)

After Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 5E:03:1C:00:38:21 (Resolvable)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
        Store hint: Yes (0x01)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated Combination key from P-256 (0x08)

Cc: stable@vger.kernel.org
Signed-off-by: Xiao Yao <xiaoyao@rock-chips.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

L2CAP/COS/CED/BI-02-C PTS test send a malformed L2CAP signaling packet
with 2 commands in it (a connection request and an unknown command) and
expect to get a connection response packet and a command reject packet.
The second is currently not sent.

Cc: stable@vger.kernel.org
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

hci_conn_hash_lookup_cis shall always match the requested CIG and CIS
ids even when they are unset as otherwise it result in not being able
to bind/connect different sockets to the same address as that would
result in having multiple sockets mapping to the same hci_conn which
doesn't really work and prevents BAP audio configuration such as
AC 6(i) when CIG and CIS are left unset.

Fixes: c14516fa ("Bluetooth: hci_conn: Fix not matching by CIS ID")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Turning on -Wstringop-overflow globally exposed a misleading compiler
warning in bluetooth:

net/bluetooth/hci_event.c: In function 'hci_cc_read_class_of_dev':
net/bluetooth/hci_event.c:524:9: error: 'memcpy' writing 3 bytes into a
region of size 0 overflows the destination [-Werror=stringop-overflow=]
  524 |         memcpy(hdev->dev_class, rp->dev_class, 3);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The problem here is the check for hdev being NULL in bt_dev_dbg() that
leads the compiler to conclude that hdev->dev_class might be an invalid
pointer access.

Add another explicit check for the same condition to make sure gcc sees
this cannot happen.

Fixes: a9de9248 ("[Bluetooth] Switch from OGF+OCF to using only opcodes")
Fixes: 1b56c90018f0 ("Makefile: Enable -Wstringop-overflow globally")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Before setting HCI_INQUIRY bit check if HCI_OP_INQUIRY was really sent
otherwise the controller maybe be generating invalid events or, more
likely, it is a result of fuzzing tools attempting to test the right
behavior of the stack when unexpected events are generated.

Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218151Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

syzbot found a potential circular dependency leading to a deadlock:
    -> #3 (&hdev->req_lock){+.+.}-{3:3}:
    __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
    __mutex_lock kernel/locking/mutex.c:732 [inline]
    mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
    hci_dev_do_close+0x3f/0x9f net/bluetooth/hci_core.c:551
    hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935
    rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345
    rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274
    vfs_write+0x277/0xcf5 fs/read_write.c:594
    ksys_write+0x19b/0x2bd fs/read_write.c:650
    do_syscall_x64 arch/x86/entry/common.c:55 [inline]
    do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
    entry_SYSCALL_64_after_hwframe+0x61/0xcb

    -> #2 (rfkill_global_mutex){+.+.}-{3:3}:
    __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
    __mutex_lock kernel/locking/mutex.c:732 [inline]
    mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
    rfkill_register+0x30/0x7e3 net/rfkill/core.c:1045
    hci_register_dev+0x48f/0x96d net/bluetooth/hci_core.c:2622
    __vhci_create_device drivers/bluetooth/hci_vhci.c:341 [inline]
    vhci_create_device+0x3ad/0x68f drivers/bluetooth/hci_vhci.c:374
    vhci_get_user drivers/bluetooth/hci_vhci.c:431 [inline]
    vhci_write+0x37b/0x429 drivers/bluetooth/hci_vhci.c:511
    call_write_iter include/linux/fs.h:2109 [inline]
    new_sync_write fs/read_write.c:509 [inline]
    vfs_write+0xaa8/0xcf5 fs/read_write.c:596
    ksys_write+0x19b/0x2bd fs/read_write.c:650
    do_syscall_x64 arch/x86/entry/common.c:55 [inline]
    do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
    entry_SYSCALL_64_after_hwframe+0x61/0xcb

    -> #1 (&data->open_mutex){+.+.}-{3:3}:
    __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
    __mutex_lock kernel/locking/mutex.c:732 [inline]
    mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
    vhci_send_frame+0x68/0x9c drivers/bluetooth/hci_vhci.c:75
    hci_send_frame+0x1cc/0x2ff net/bluetooth/hci_core.c:2989
    hci_sched_acl_pkt net/bluetooth/hci_core.c:3498 [inline]
    hci_sched_acl net/bluetooth/hci_core.c:3583 [inline]
    hci_tx_work+0xb94/0x1a60 net/bluetooth/hci_core.c:3654
    process_one_work+0x901/0xfb8 kernel/workqueue.c:2310
    worker_thread+0xa67/0x1003 kernel/workqueue.c:2457
    kthread+0x36a/0x430 kernel/kthread.c:319
    ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298

    -> #0 ((work_completion)(&hdev->tx_work)){+.+.}-{0:0}:
    check_prev_add kernel/locking/lockdep.c:3053 [inline]
    check_prevs_add kernel/locking/lockdep.c:3172 [inline]
    validate_chain kernel/locking/lockdep.c:3787 [inline]
    __lock_acquire+0x2d32/0x77fa kernel/locking/lockdep.c:5011
    lock_acquire+0x273/0x4d5 kernel/locking/lockdep.c:5622
    __flush_work+0xee/0x19f kernel/workqueue.c:3090
    hci_dev_close_sync+0x32f/0x1113 net/bluetooth/hci_sync.c:4352
    hci_dev_do_close+0x47/0x9f net/bluetooth/hci_core.c:553
    hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935
    rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345
    rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274
    vfs_write+0x277/0xcf5 fs/read_write.c:594
    ksys_write+0x19b/0x2bd fs/read_write.c:650
    do_syscall_x64 arch/x86/entry/common.c:55 [inline]
    do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
    entry_SYSCALL_64_after_hwframe+0x61/0xcb

This change removes the need for acquiring the open_mutex in
vhci_send_frame, thus eliminating the potential deadlock while
maintaining the required packet ordering.

Fixes: 92d4abd6 ("Bluetooth: vhci: Fix race when opening vhci device")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Some layers such as SMP depend on getting notified about encryption
changes immediately as they only allow certain PDU to be transmitted
over an encrypted link which may cause SMP implementation to reject
valid PDUs received thus causing pairing to fail when it shouldn't.

Fixes: 7aca0ac4 ("Bluetooth: Wait for HCI_OP_WRITE_AUTH_PAYLOAD_TO to complete")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

syzbot found an interesting netdev refcounting issue in
net/rose/af_rose.c, thanks to CONFIG_NET_DEV_REFCNT_TRACKER=y [1]

Problem is that rose_kill_by_device() can change rose->device
while other threads do not expect the pointer to be changed.

We have to first collect sockets in a temporary array,
then perform the changes while holding the socket
lock and rose_list_lock spinlock (in this order)

Change rose_release() to also acquire rose_list_lock
before releasing the netdev refcount.

[1]

[ 1185.055088][ T7889] ref_tracker: reference already released.
[ 1185.061476][ T7889] ref_tracker: allocated in:
[ 1185.066081][ T7889]  rose_bind+0x4ab/0xd10
[ 1185.070446][ T7889]  __sys_bind+0x1ec/0x220
[ 1185.074818][ T7889]  __x64_sys_bind+0x72/0xb0
[ 1185.079356][ T7889]  do_syscall_64+0x40/0x110
[ 1185.083897][ T7889]  entry_SYSCALL_64_after_hwframe+0x63/0x6b
[ 1185.089835][ T7889] ref_tracker: freed in:
[ 1185.094088][ T7889]  rose_release+0x2f5/0x570
[ 1185.098629][ T7889]  __sock_release+0xae/0x260
[ 1185.103262][ T7889]  sock_close+0x1c/0x20
[ 1185.107453][ T7889]  __fput+0x270/0xbb0
[ 1185.111467][ T7889]  task_work_run+0x14d/0x240
[ 1185.116085][ T7889]  get_signal+0x106f/0x2790
[ 1185.120622][ T7889]  arch_do_signal_or_restart+0x90/0x7f0
[ 1185.126205][ T7889]  exit_to_user_mode_prepare+0x121/0x240
[ 1185.131846][ T7889]  syscall_exit_to_user_mode+0x1e/0x60
[ 1185.137293][ T7889]  do_syscall_64+0x4d/0x110
[ 1185.141783][ T7889]  entry_SYSCALL_64_after_hwframe+0x63/0x6b
[ 1185.148085][ T7889] ------------[ cut here ]------------

WARNING: CPU: 1 PID: 7889 at lib/ref_tracker.c:255 ref_tracker_free+0x61a/0x810 lib/ref_tracker.c:255
Modules linked in:
CPU: 1 PID: 7889 Comm: syz-executor.2 Not tainted 6.7.0-rc4-syzkaller-00162-g65c95f78 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:ref_tracker_free+0x61a/0x810 lib/ref_tracker.c:255
Code: 00 44 8b 6b 18 31 ff 44 89 ee e8 21 62 f5 fc 45 85 ed 0f 85 a6 00 00 00 e8 a3 66 f5 fc 48 8b 34 24 48 89 ef e8 27 5f f1 05 90 <0f> 0b 90 bb ea ff ff ff e9 52 fd ff ff e8 84 66 f5 fc 4c 8d 6d 44
RSP: 0018:ffffc90004917850 EFLAGS: 00010202
RAX: 0000000000000201 RBX: ffff88802618f4c0 RCX: 0000000000000000
RDX: 0000000000000202 RSI: ffffffff8accb920 RDI: 0000000000000001
RBP: ffff8880269ea5b8 R08: 0000000000000001 R09: fffffbfff23e35f6
R10: ffffffff91f1afb7 R11: 0000000000000001 R12: 1ffff92000922f0c
R13: 0000000005a2039b R14: ffff88802618f4d8 R15: 00000000ffffffff
FS: 00007f0a720ef6c0(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f43a819d988 CR3: 0000000076c64000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
netdev_tracker_free include/linux/netdevice.h:4127 [inline]
netdev_put include/linux/netdevice.h:4144 [inline]
netdev_put include/linux/netdevice.h:4140 [inline]
rose_kill_by_device net/rose/af_rose.c:195 [inline]
rose_device_event+0x25d/0x330 net/rose/af_rose.c:218
notifier_call_chain+0xb6/0x3b0 kernel/notifier.c:93
call_netdevice_notifiers_info+0xbe/0x130 net/core/dev.c:1967
call_netdevice_notifiers_extack net/core/dev.c:2005 [inline]
call_netdevice_notifiers net/core/dev.c:2019 [inline]
__dev_notify_flags+0x1f5/0x2e0 net/core/dev.c:8646
dev_change_flags+0x122/0x170 net/core/dev.c:8682
dev_ifsioc+0x9ad/0x1090 net/core/dev_ioctl.c:529
dev_ioctl+0x224/0x1090 net/core/dev_ioctl.c:786
sock_do_ioctl+0x198/0x270 net/socket.c:1234
sock_ioctl+0x22e/0x6b0 net/socket.c:1339
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl fs/ioctl.c:857 [inline]
__x64_sys_ioctl+0x18f/0x210 fs/ioctl.c:857
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f0a7147cba9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f0a720ef0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f0a7159bf80 RCX: 00007f0a7147cba9
RDX: 0000000020000040 RSI: 0000000000008914 RDI: 0000000000000004
RBP: 00007f0a714c847a R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f0a7159bf80 R15: 00007ffc8bb3a5f8
</TASK>

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Bernard Pidoux <f6bvp@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the error handling of 'offset > adapter->ring_size', the
tx_ring->tx_buffer allocated by kzalloc should be freed,
instead of 'goto failed' instantly.

Fixes: a6a53252 ("atl1e: Atheros L1E Gigabit Ethernet driver")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ife_decode() calls pskb_may_pull() two times, we need to reload
ifehdr after the second one, or risk use-after-free as reported
by syzbot:

BUG: KASAN: slab-use-after-free in __ife_tlv_meta_valid net/ife/ife.c:108 [inline]
BUG: KASAN: slab-use-after-free in ife_tlv_meta_decode+0x1d1/0x210 net/ife/ife.c:131
Read of size 2 at addr ffff88802d7300a4 by task syz-executor.5/22323

CPU: 0 PID: 22323 Comm: syz-executor.5 Not tainted 6.7.0-rc3-syzkaller-00804-g074ac38d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc4/0x620 mm/kasan/report.c:475
kasan_report+0xda/0x110 mm/kasan/report.c:588
__ife_tlv_meta_valid net/ife/ife.c:108 [inline]
ife_tlv_meta_decode+0x1d1/0x210 net/ife/ife.c:131
tcf_ife_decode net/sched/act_ife.c:739 [inline]
tcf_ife_act+0x4e3/0x1cd0 net/sched/act_ife.c:879
tc_act include/net/tc_wrapper.h:221 [inline]
tcf_action_exec+0x1ac/0x620 net/sched/act_api.c:1079
tcf_exts_exec include/net/pkt_cls.h:344 [inline]
mall_classify+0x201/0x310 net/sched/cls_matchall.c:42
tc_classify include/net/tc_wrapper.h:227 [inline]
__tcf_classify net/sched/cls_api.c:1703 [inline]
tcf_classify+0x82f/0x1260 net/sched/cls_api.c:1800
hfsc_classify net/sched/sch_hfsc.c:1147 [inline]
hfsc_enqueue+0x315/0x1060 net/sched/sch_hfsc.c:1546
dev_qdisc_enqueue+0x3f/0x230 net/core/dev.c:3739
__dev_xmit_skb net/core/dev.c:3828 [inline]
__dev_queue_xmit+0x1de1/0x3d30 net/core/dev.c:4311
dev_queue_xmit include/linux/netdevice.h:3165 [inline]
packet_xmit+0x237/0x350 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x24aa/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7fe9acc7cae9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe9ada450c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007fe9acd9bf80 RCX: 00007fe9acc7cae9
RDX: 000000000000fce0 RSI: 00000000200002c0 RDI: 0000000000000003
RBP: 00007fe9accc847a R08: 0000000020000140 R09: 0000000000000014
R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007fe9acd9bf80 R15: 00007ffd5427ae78
</TASK>

Allocated by task 22323:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:374 [inline]
__kasan_kmalloc+0xa2/0xb0 mm/kasan/common.c:383
kasan_kmalloc include/linux/kasan.h:198 [inline]
__do_kmalloc_node mm/slab_common.c:1007 [inline]
__kmalloc_node_track_caller+0x5a/0x90 mm/slab_common.c:1027
kmalloc_reserve+0xef/0x260 net/core/skbuff.c:582
__alloc_skb+0x12b/0x330 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1298 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x1e2a/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b

Freed by task 22323:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200
kasan_slab_free include/linux/kasan.h:164 [inline]
slab_free_hook mm/slub.c:1800 [inline]
slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826
slab_free mm/slub.c:3809 [inline]
__kmem_cache_free+0xc0/0x180 mm/slub.c:3822
skb_kfree_head net/core/skbuff.c:950 [inline]
skb_free_head+0x110/0x1b0 net/core/skbuff.c:962
pskb_expand_head+0x3c5/0x1170 net/core/skbuff.c:2130
__pskb_pull_tail+0xe1/0x1830 net/core/skbuff.c:2655
pskb_may_pull_reason include/linux/skbuff.h:2685 [inline]
pskb_may_pull include/linux/skbuff.h:2693 [inline]
ife_decode+0x394/0x4f0 net/ife/ife.c:82
tcf_ife_decode net/sched/act_ife.c:727 [inline]
tcf_ife_act+0x43b/0x1cd0 net/sched/act_ife.c:879
tc_act include/net/tc_wrapper.h:221 [inline]
tcf_action_exec+0x1ac/0x620 net/sched/act_api.c:1079
tcf_exts_exec include/net/pkt_cls.h:344 [inline]
mall_classify+0x201/0x310 net/sched/cls_matchall.c:42
tc_classify include/net/tc_wrapper.h:227 [inline]
__tcf_classify net/sched/cls_api.c:1703 [inline]
tcf_classify+0x82f/0x1260 net/sched/cls_api.c:1800
hfsc_classify net/sched/sch_hfsc.c:1147 [inline]
hfsc_enqueue+0x315/0x1060 net/sched/sch_hfsc.c:1546
dev_qdisc_enqueue+0x3f/0x230 net/core/dev.c:3739
__dev_xmit_skb net/core/dev.c:3828 [inline]
__dev_queue_xmit+0x1de1/0x3d30 net/core/dev.c:4311
dev_queue_xmit include/linux/netdevice.h:3165 [inline]
packet_xmit+0x237/0x350 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x24aa/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b

The buggy address belongs to the object at ffff88802d730000
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 164 bytes inside of
freed 8192-byte region [ffff88802d730000, ffff88802d732000)

The buggy address belongs to the physical page:
page:ffffea0000b5cc00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2d730
head:ffffea0000b5cc00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfff00000000840(slab|head|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 00fff00000000840 ffff888013042280 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x1d20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL), pid 22323, tgid 22320 (syz-executor.5), ts 950317230369, free_ts 950233467461
set_page_owner include/linux/page_owner.h:31 [inline]
post_alloc_hook+0x2d0/0x350 mm/page_alloc.c:1544
prep_new_page mm/page_alloc.c:1551 [inline]
get_page_from_freelist+0xa28/0x3730 mm/page_alloc.c:3319
__alloc_pages+0x22e/0x2420 mm/page_alloc.c:4575
alloc_pages_mpol+0x258/0x5f0 mm/mempolicy.c:2133
alloc_slab_page mm/slub.c:1870 [inline]
allocate_slab mm/slub.c:2017 [inline]
new_slab+0x283/0x3c0 mm/slub.c:2070
___slab_alloc+0x979/0x1500 mm/slub.c:3223
__slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3322
__slab_alloc_node mm/slub.c:3375 [inline]
slab_alloc_node mm/slub.c:3468 [inline]
__kmem_cache_alloc_node+0x131/0x310 mm/slub.c:3517
__do_kmalloc_node mm/slab_common.c:1006 [inline]
__kmalloc_node_track_caller+0x4a/0x90 mm/slab_common.c:1027
kmalloc_reserve+0xef/0x260 net/core/skbuff.c:582
__alloc_skb+0x12b/0x330 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1298 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x1e2a/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1144 [inline]
free_unref_page_prepare+0x53c/0xb80 mm/page_alloc.c:2354
free_unref_page+0x33/0x3b0 mm/page_alloc.c:2494
__unfreeze_partials+0x226/0x240 mm/slub.c:2655
qlink_free mm/kasan/quarantine.c:168 [inline]
qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
kasan_quarantine_reduce+0x18e/0x1d0 mm/kasan/quarantine.c:294
__kasan_slab_alloc+0x65/0x90 mm/kasan/common.c:305
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3478 [inline]
slab_alloc mm/slub.c:3486 [inline]
__kmem_cache_alloc_lru mm/slub.c:3493 [inline]
kmem_cache_alloc_lru+0x219/0x6f0 mm/slub.c:3509
alloc_inode_sb include/linux/fs.h:2937 [inline]
ext4_alloc_inode+0x28/0x650 fs/ext4/super.c:1408
alloc_inode+0x5d/0x220 fs/inode.c:261
new_inode_pseudo fs/inode.c:1006 [inline]
new_inode+0x22/0x260 fs/inode.c:1032
__ext4_new_inode+0x333/0x5200 fs/ext4/ialloc.c:958
ext4_symlink+0x5d7/0xa20 fs/ext4/namei.c:3398
vfs_symlink fs/namei.c:4464 [inline]
vfs_symlink+0x3e5/0x620 fs/namei.c:4448
do_symlinkat+0x25f/0x310 fs/namei.c:4490
__do_sys_symlinkat fs/namei.c:4506 [inline]
__se_sys_symlinkat fs/namei.c:4503 [inline]
__x64_sys_symlinkat+0x97/0xc0 fs/namei.c:4503
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82

Fixes: d57493d6 ("net: sched: ife: check on metadata length")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Alexander Aring <aahringo@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following NULL pointer dereference issue occurred:

BUG: kernel NULL pointer dereference, address: 0000000000000000
<...>
RIP: 0010:ccid_hc_tx_send_packet net/dccp/ccid.h:166 [inline]
RIP: 0010:dccp_write_xmit+0x49/0x140 net/dccp/output.c:356
<...>
Call Trace:
 <TASK>
 dccp_sendmsg+0x642/0x7e0 net/dccp/proto.c:801
 inet_sendmsg+0x63/0x90 net/ipv4/af_inet.c:846
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg+0x83/0xe0 net/socket.c:745
 ____sys_sendmsg+0x443/0x510 net/socket.c:2558
 ___sys_sendmsg+0xe5/0x150 net/socket.c:2612
 __sys_sendmsg+0xa6/0x120 net/socket.c:2641
 __do_sys_sendmsg net/socket.c:2650 [inline]
 __se_sys_sendmsg net/socket.c:2648 [inline]
 __x64_sys_sendmsg+0x45/0x50 net/socket.c:2648
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x43/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

sk_wait_event() returns an error (-EPIPE) if disconnect() is called on the
socket waiting for the event. However, sk_stream_wait_connect() returns
success, i.e. zero, even if sk_wait_event() returns -EPIPE, so a function
that waits for a connection with sk_stream_wait_connect() may misbehave.

In the case of the above DCCP issue, dccp_sendmsg() is waiting for the
connection. If disconnect() is called in concurrently, the above issue
occurs.

This patch fixes the issue by returning error from sk_stream_wait_connect()
if sk_wait_event() fails.

Fixes: 419ce133 ("tcp: allow again tcp_disconnect() when threads are waiting")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reported-by: syzbot+c71bc336c5061153b502@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During PFC configuration failure the code was not handling a graceful
exit. This patch fixes the same and add proper code for a graceful exit.

Fixes: 99c969a8 ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ifconfig ethx up, will set page->refcount larger than 1,
and then ifconfig ethx down, calling __page_frag_cache_drain()
to free pages, it is not compatible with page pool.
So deleting codes which changing page->refcount.

Fixes: 3c47e8ae ("net: libwx: Support to receive packets in NAPI")
Signed-off-by: duanqiangwen <duanqiangwen@net-swift.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Johannes Berg says:

====================
 * add (and fix) certificate for regdb handover to Chen-Yu Tsai
 * fix rfkill GPIO handling
 * a few driver (iwlwifi, mt76) crash fixes
 * logic fixes in the stack

* tag 'wireless-2023-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: cfg80211: fix certs build to not depend on file order
  wifi: mt76: fix crash with WED rx support enabled
  wifi: iwlwifi: pcie: avoid a NULL pointer dereference
  wifi: mac80211: mesh_plink: fix matches_local logic
  wifi: mac80211: mesh: check element parsing succeeded
  wifi: mac80211: check defragmentation succeeded
  wifi: mac80211: don't re-add debugfs during reconfig
  net: rfkill: gpio: set GPIO direction
  wifi: mac80211: check if the existing link config remains unchanged
  wifi: cfg80211: Add my certificate
  wifi: iwlwifi: pcie: add another missing bh-disable for rxq->lock
  wifi: ieee80211: don't require protected vendor action frames
====================

Link: https://lore.kernel.org/r/20231214111515.60626-3-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5 fixes 2023-12-13

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2023-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Correct snprintf truncation handling for fw_version buffer used by representors
  net/mlx5e: Correct snprintf truncation handling for fw_version buffer
  net/mlx5e: Fix error codes in alloc_branch_attr()
  net/mlx5e: Fix error code in mlx5e_tc_action_miss_mapping_get()
  net/mlx5: Refactor mlx5_flow_destination->rep pointer to vport num
  net/mlx5: Fix fw tracer first block check
  net/mlx5e: XDP, Drop fragmented packets larger than MTU size
  net/mlx5e: Decrease num_block_tc when unblock tc offload
  net/mlx5e: Fix overrun reported by coverity
  net/mlx5e: fix a potential double-free in fs_udp_create_groups
  net/mlx5e: Fix a race in command alloc flow
  net/mlx5e: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()
  net/mlx5e: fix double free of encap_header
  Revert "net/mlx5e: fix double free of encap_header"
  Revert "net/mlx5e: fix double free of encap_header in update funcs"
====================

Link: https://lore.kernel.org/r/20231214012505.42666-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-12-13 (ice, i40e)

This series contains updates to ice and i40e drivers.

Michal Schmidt prevents possible out-of-bounds access for ice.

Ivan Vecera corrects value for MDIO clause 45 on i40e.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: Fix ST code value for Clause 45
  ice: fix theoretical out-of-bounds access in ethtool link modes
====================

Link: https://lore.kernel.org/r/20231213220827.1311772-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The typo from ocelot_port_rmon_stats_cb() was also carried over to
ocelot_port_pmac_rmon_stats_cb() as well, leading to incorrect TX RMON
stats for the pMAC too.

Fixes: ab3f97a9 ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231214000902.545625-2-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is a typo in the driver due to which we report incorrect TX RMON
counters for the 256-511 octet bucket and all the other buckets larger
than that.

Bug found with the selftest at
https://patchwork.kernel.org/project/netdevbpf/patch/20231211223346.2497157-9-tobias@waldekranz.com/

Fixes: e32036e1 ("net: mscc: ocelot: add support for all sorts of standardized counters present in DSA")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231214000902.545625-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
"Current release - regressions:

   - tcp: fix tcp_disordered_ack() vs usec TS resolution

  Current release - new code bugs:

   - dpll: sanitize possible null pointer dereference in
     dpll_pin_parent_pin_set()

   - eth: octeon_ep: initialise control mbox tasks before using APIs

  Previous releases - regressions:

   - io_uring/af_unix: disable sending io_uring over sockets

   - eth: mlx5e:
       - TC, don't offload post action rule if not supported
       - fix possible deadlock on mlx5e_tx_timeout_work

   - eth: iavf: fix iavf_shutdown to call iavf_remove instead iavf_close

   - eth: bnxt_en: fix skb recycling logic in bnxt_deliver_skb()

   - eth: ena: fix DMA syncing in XDP path when SWIOTLB is on

   - eth: team: fix use-after-free when an option instance allocation
     fails

  Previous releases - always broken:

   - neighbour: don't let neigh_forced_gc() disable preemption for long

   - net: prevent mss overflow in skb_segment()

   - ipv6: support reporting otherwise unknown prefix flags in
     RTM_NEWPREFIX

   - tcp: remove acked SYN flag from packet in the transmit queue
     correctly

   - eth: octeontx2-af:
       - fix a use-after-free in rvu_nix_register_reporters
       - fix promisc mcam entry action

   - eth: dwmac-loongson: make sure MDIO is initialized before use

   - eth: atlantic: fix double free in ring reinit logic"

* tag 'net-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  net: atlantic: fix double free in ring reinit logic
  appletalk: Fix Use-After-Free in atalk_ioctl
  net: stmmac: Handle disabled MDIO busses from devicetree
  net: stmmac: dwmac-qcom-ethqos: Fix drops in 10M SGMII RX
  dpaa2-switch: do not ask for MDB, VLAN and FDB replay
  dpaa2-switch: fix size of the dma_unmap
  net: prevent mss overflow in skb_segment()
  vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space()
  Revert "tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set"
  MIPS: dts: loongson: drop incorrect dwmac fallback compatible
  stmmac: dwmac-loongson: drop useless check for compatible fallback
  stmmac: dwmac-loongson: Make sure MDIO is initialized before use
  tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set
  dpll: sanitize possible null pointer dereference in dpll_pin_parent_pin_set()
  net: ena: Fix XDP redirection error
  net: ena: Fix DMA syncing in XDP path when SWIOTLB is on
  net: ena: Fix xdp drops handling due to multibuf packets
  net: ena: Destroy correct number of xdp queues upon failure
  net: Remove acked SYN flag from packet in the transmit queue correctly
  qed: Fix a potential use-after-free in qed_cxt_tables_alloc
  ...

Pull btrfs fixes from David Sterba:
  "Some fixes to quota accounting code, mostly around error handling and
   correctness:

   - free reserves on various error paths, after IO errors or
     transaction abort

   - don't clear reserved range at the folio release time, it'll be
     properly cleared after final write

   - fix integer overflow due to int used when passing around size of
     freed reservations

   - fix a regression in squota accounting that missed some cases with
     delayed refs"

* tag 'for-6.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: ensure releasing squota reserve on head refs
  btrfs: don't clear qgroup reserved bit in release_folio
  btrfs: free qgroup pertrans reserve on transaction abort
  btrfs: fix qgroup_free_reserved_data int overflow
  btrfs: free qgroup reserve when ORDERED_IOERR is set

Driver has a logic leak in ring data allocation/free,
where double free may happen in aq_ring_free if system is under
stress and driver init/deinit is happening.

The probability is higher to get this during suspend/resume cycle.

Verification was done simulating same conditions with

    stress -m 2000 --vm-bytes 20M --vm-hang 10 --backoff 1000
    while true; do sudo ifconfig enp1s0 down; sudo ifconfig enp1s0 up; done

Fixed by explicitly clearing pointers to NULL on deallocation

Fixes: 018423e9 ("net: ethernet: aquantia: Add ring support code")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/netdev/CAHk-=wiZZi7FcvqVSUirHBjx0bBUZ4dFrMDVLc3+3HCrtq0rBA@mail.gmail.com/Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20231213094044.22988-1-irusskikh@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>