As found by gcc -Wmaybe-uninitialized, having a storage_bytes value other
than 2 or 4 will result in undefined behavior:

drivers/iio/temperature/maxim_thermocouple.c: In function 'maxim_thermocouple_read':
drivers/iio/temperature/maxim_thermocouple.c:141:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This probably cannot happen, but returning -EINVAL here is appropriate
and makes gcc happy and the code more robust.

Fixes: 231147ee ("iio: maxim_thermocouple: Align 16 bit big endian value of raw reads")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
(cherry picked from commit 32cb7d27)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This basicly reverts commit e534f3e9 (staging:nvec: Introduce the use of
the managed version of kzalloc). Serio struct should never by managed
because it is refcounted. Doing so will lead to a double free oops on module
remove.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Fixes: e534f3e9 ("staging:nvec: Introduce the use of the managed version of kzalloc")
Cc: stable <stable@vger.kernel.org> # 3.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 36b30d61.

This is necessary to detect paz00 (ac100) touchpad properly as one
speaking ETPS/2 protocol. Without it X.org's synaptics driver doesn't
work as the touchpad is detected as an ImPS/2 mouse instead.

Commit ec6184b1 changed the way
auto-detection is performed on ports marked as pass through and made the
issue apparent.

A pass through port is an additional PS/2 port used to connect a slave
device to a master device that is using PS/2 to communicate with the
host (so slave's PS/2 communication is tunneled over master's PS/2
link). "Synaptics PS/2 TouchPad Interfacing Guide" describes such a
setup (PS/2 PASS-THROUGH OPTION section).

Since paz00's embedded controller is not connected to a PS/2 port
itself, the PS/2 interface it exposes is not a pass-through one.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Fixes: 36b30d61 ("staging: nvec: ps2: change serio type to passthrough")
Cc: stable <stable@vger.kernel.org> # 3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This command was sent behind serio's back and the answer to it was
confusing atkbd probe function which lead to the elantech touchpad
getting detected as a keyboard.

To prevent this from happening just let every party do its part of the
job.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Cc: stable <stable@vger.kernel.org> # 3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make sure to drop the device reference taken by of_find_device_by_node()
before returning from arche_platform_change_state().

Note that this code is expected to be removed, but let's fix up the leak
nonetheless.

Fixes: 886aba55 ("greybus: arche-platform: Export fn to allow...")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`ni_tio_clock_period_ps()` used to return the clock period in
picoseconds, and had a `BUG()` call for invalid cases.  It was changed
to pass the clock period back via a pointer parameter and return an
error for the invalid cases.  Unfortunately the code to handle
user-specified clock sources with user-specified clock period is still
returning the clock period the old way, which can lead to the caller not
getting the clock period, or seeing an unexpected error.  Fix it by
passing the clock period via the pointer parameter and returning `0`.

Fixes: b42ca86a ("staging: comedi: ni_tio: remove BUG() checks for ni_tio_get_clock_src()")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Early commit 30ca5cb6 ("staging: sm750fb: change definition of
PANEL_PLANE_TL fields") and 27b047bb ("staging: sm750fb: change
definition of PANEL_PLANE_BR fields") modify the register bit fields
definitions. But the modifications are wrong, because the bit mask of
"bit field 10:0" is not 0xeff, but 0x7ff. The wrong definition bugs
makes display very strange.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: stable <stable@vger.kernel.org> # 4.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-fixes-for-4.9b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Second set of IIO fixes for the 4.9 cycle.

Interestingly scale related fixes for accelerometers at both ends of
the range.  Obviously more varied devices turning up than we've seen before!

* ad5933
  - fix an uninitialized value in a return case that is winding up GCC.
* hid sensors
  - missing pm function prevents hid rotations sensors from working on newer
  ISH hubs (works by luck on older ones)
  - increase of scale precision needed to fix a case where on a yoga 260
  the reported scale is 0 (presumably a high precision but very low g sensor).
* st_sensors
  - fix an issue seen with the hs3lis331dl where the range is much greater
  than previous devices (100's of g) and hence the per bit scale is greater
  than 1.

While testing, it was observed that on some platforms the scale value
from iio sysfs for gyroscope is always 0 (E.g. Yoga 260). This results
in the final angular velocity component values to be zeros.

This is caused by insufficient precision of scale value displayed in sysfs.
If the precision is changed to nano from current micro, then this is
sufficient to display the scale value on this platform.
Since this can be a problem for all other HID sensors, increase scale
precision of all HID sensors to nano from current micro.

Results on Yoga 260:

name		scale before	scale now
--------------------------------------------
gyro_3d		0.000000	0.000000174
als			0.001000	0.001000000
magn_3d		0.000001	0.000001000
accel_3d		0.000009	0.000009806
Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This fix makes newer ISH hubs work. Previous ones worked by lucky
coincidence.

Rotation sensor function does not work due to miss PM function.
Add common hid sensor iio pm function for rotation sensor.

Further clarification from Srinivas:

If CONFIG_PM is not defined, then this prevents this sensor to
function. So above commit caused this.

This sensor was supposed to be always on to trigger wake up in prior
external hubs. But with the new ISH hub this is not the case.
Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Fixes: 2b89635e ("iio: hid_sensor_hub: Common PM functions")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

fix scale configuration/parsing for h3lis331dl accel driver
when sensitivity is higher than 1(m/s^2)/digit
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Fixes: 1e52fefc ("iio: accel: Add support for the h3lis331dl accelerometer")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Pull x86 bugfix from Thomas Gleixner:
 "A single bugfix for the recent changes related to registering the boot
  cpu when this has not happened before prefill_possible_map().

  The main problem with this change got fixed already, but we missed the
  case where the local APIC is not yet mapped, when prefill_possible_map()
  is invoked, so the registration of the boot cpu which has the APIC bit
  set in CPUID will explode.

  I should have seen that issue earlier, but all I can do now is feeling
  embarassed"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/smpboot: Init apic mapping before usage

Pull ubi/ubifs fixes from Richard Weinberger:
 "This contains fixes for issues in both UBI and UBIFS:

   - A regression wrt overlayfs, introduced in -rc2.
   - An UBI issue, found by Dan Carpenter's static checker"

* tag 'upstream-4.9-rc3' of git://git.infradead.org/linux-ubifs:
  ubifs: Fix regression in ubifs_readdir()
  ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()

Pull ARM SoC fixes from Olof Johansson:
 "We haven't seen a whole lot of fixes for the first two weeks since the
  merge window, but here is the batch that we have at the moment.

  Nothing sticks out as particularly bad or scary, it's mostly a handful
  of smaller fixes to several platforms. The Uniphier reset controller
  changes could probably have been delayed to 4.10, but they're not
  scary and just plumbing up driver changes that went in during the
  merge window.

  We're also adding another maintainer to Marvell Berlin platforms, to
  help out when Sebastian is too busy. Yay teamwork!"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031
  ARM: dts: vf610: fix IRQ flag of global timer
  ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path
  ARM: imx: gpc: Initialize all power domains
  arm64: dts: Updated NAND DT properties for NS2 SVK
  arm64: dts: uniphier: change MIO node to SD control node
  ARM: dts: uniphier: change MIO node to SD control node
  reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs
  arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
  ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER
  arm64: dts: Add timer erratum property for LS2080A and LS1043A
  arm64: dts: rockchip: remove the abuse of keep-power-in-suspend
  ARM: multi_v7_defconfig: Enable Intel e1000e driver
  MAINTAINERS: add myself as Marvell berlin SoC maintainer
  bus: qcom-ebi2: depend on ARCH_QCOM or COMPILE_TEST
  ARM: dts: fix the SD card on the Snowball
  arm64: dts: rockchip: remove always-on and boot-on from vcc_sd
  arm64: dts: marvell: fix clocksource for CP110 master SPI0
  ARM: mvebu: Select corediv clk for all mvebu v7 SoC

Pull char/misc driver fixes from Greg KH:
 "Here are a few small char/misc driver fixes for reported issues.

  The "biggest" are two binder fixes for reported issues that have been
  shipping in Android phones for a while now, the others are various
  fixes for reported problems.

  And there's a MAINTAINERS update for good measure.

  All have been in linux-next with no reported issues"

* tag 'char-misc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  MAINTAINERS: Add entry for genwqe driver
  VMCI: Doorbell create and destroy fixes
  GenWQE: Fix bad page access during abort of resource allocation
  vme: vme_get_size potentially returning incorrect value on failure
  extcon: qcom-spmi-misc: Sync the extcon state on interrupt
  hv: do not lose pending heartbeat vmbus packets
  mei: txe: don't clean an unprocessed interrupt cause.
  ANDROID: binder: Clear binder and cookie when setting handle in flat binder struct
  ANDROID: binder: Add strong ref checks

Merge tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes

Correct regulator handling on Rockchip arm64 boards to make
bind/unbind calls work correctly and remove a sdio-only
property from non-sdio mmc hosts, that accidentially was
added there.

* tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: remove the abuse of keep-power-in-suspend
  arm64: dts: rockchip: remove always-on and boot-on from vcc_sd
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux into fixes

This pull request contains a single fix for Broadcom ARM64-based SoCs:

- Ray adds the required bus width and OOB sector size properties to the
  Northstar 2 SVK reference board in order for the NAND controller to work
  properly

* tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux:
  arm64: dts: Updated NAND DT properties for NS2 SVK
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

The i.MX fixes for 4.9:
 - A couple of patches from Fabio to fix the GPC power domain regression
   which is caused by PM Domain core change 0159ec67
   ("PM / Domains: Verify the PM domain is present when adding a
   provider"), and a related kernel crash seen with multi_v7_defconfig
   build.
 - Correct the PHY ID mask for AR8031 to match phy driver code.
 - Apply new added timer erratum A008585 for LS1043A and LS2080A SoC.
 - Correct vf610 global timer IRQ flag to avoid warning from gic driver
   after commit 992345a5 ("irqchip/gic: WARN if setting the
   interrupt type for a PPI fails").

* tag 'imx-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031
  ARM: dts: vf610: fix IRQ flag of global timer
  ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path
  ARM: imx: gpc: Initialize all power domains
  arm64: dts: Add timer erratum property for LS2080A and LS1043A
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into fixes

UniPhier ARM SoC fixes for v4.9

- Add "select ARCH_HAS_RESET_CONTROLLER" in Kconfig
- Rename wrongly-named mioctrl to sdctrl

* tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: change MIO node to SD control node
  ARM: dts: uniphier: change MIO node to SD control node
  reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs
  arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
  ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull driver core fixes from Greg KH:
 "Here are two small driver core / kernfs fixes for 4.9-rc3.

  One makes the Kconfig entry for DEBUG_TEST_DRIVER_REMOVE a bit more
  explicit that this is a crazy thing to enable for a distro kernel
  (thanks for trying Fedora!), the other resolves an issue with vim
  opening kernfs files (sysfs, configfs, etc.)

  Both have been in linux-next with no reported issues"

* tag 'driver-core-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Make Kconfig text for DEBUG_TEST_DRIVER_REMOVE stronger
  kernfs: Add noop_fsync to supported kernfs_file_fops

Pull staging and IIO driver fixes from Greg KH:
 "Here are some small staging and iio driver fixes for reported issues
  for 4.9-rc3. Nothing major, the "largest" being a lustre fix for a
  sysfs file that was obviously wrong, and had never been tested, so it
  was moved to debugfs as that is where it belongs. The others are small
  bug fixes for reported issues with various staging or iio drivers.

  All have been in linux-next for a while with no reported issues"

* tag 'staging-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  greybus: fix a leak on error in gb_module_create()
  greybus: es2: fix error return code in ap_probe()
  greybus: arche-platform: Add missing of_node_put() in arche_platform_change_state()
  staging: android: ion: Fix error handling in ion_query_heaps()
  iio: accel: sca3000_core: avoid potentially uninitialized variable
  iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value
  staging/lustre/llite: Move unstable_stats from sysfs to debugfs
  Staging: wilc1000: Fix kernel Oops on opening the device
  staging: android/ion: testing the wrong variable
  Staging: greybus: uart: Use gbphy_dev->dev instead of bundle->dev
  Staging: greybus: gpio: Use gbphy_dev->dev instead of bundle->dev
  iio: adc: ti-adc081c: Select IIO_TRIGGERED_BUFFER to prevent build errors
  iio: maxim_thermocouple: Align 16 bit big endian value of raw reads

Pull tty/serial driver fixes from Greg KH:
 "Here are a number of small tty and serial driver fixes for reported
  issues for 4.9-rc3. Nothing major, but they do resolve a bunch of
  problems with the tty core changes that are in 4.9-rc1, and finally
  the atmel serial driver is back working properly.

  All have been in linux-next with no reported issues"

* tag 'tty-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial_core: fix NULL struct tty pointer access in uart_write_wakeup
  tty: serial_core: Fix serial console crash on port shutdown
  tty/serial: at91: fix hardware handshake on Atmel platforms
  vt: clear selection before resizing
  sc16is7xx: always write state when configuring GPIO as an output
  sh-sci: document R8A7743/5 support
  tty: serial: 8250: 8250_core: NXP SC16C2552 workaround
  tty: limit terminal size to 4M chars
  tty: serial: fsl_lpuart: Fix Tx DMA edge case
  serial: 8250_lpss: enable MSI for sure
  serial: core: fix console problems on uart_close
  serial: 8250_uniphier: fix clearing divisor latch access bit
  serial: 8250_uniphier: fix more unterminated string
  serial: pch_uart: add terminate entry for dmi_system_id tables
  devicetree: bindings: uart: Add new compatible string for ZynqMP
  serial: xuartps: Add new compatible string for ZynqMP
  serial: SERIAL_STM32 should depend on HAS_DMA
  serial: stm32: Fix comparisons with undefined register
  tty: vt, fix bogus division in csi_J

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for 4.9-rc3.

  There is the usual number of gadget and xhci patches in here to
  resolved reported issues, as well as some usb-serial driver fixes and
  new device ids.

  All have been in linux-next with no reported issues"

* tag 'usb-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  usb: chipidea: host: fix NULL ptr dereference during shutdown
  usb: renesas_usbhs: add wait after initialization for R-Car Gen3
  usb: increase ohci watchdog delay to 275 msec
  usb: musb: Call pm_runtime from musb_gadget_queue
  usb: musb: Fix hardirq-safe hardirq-unsafe lock order error
  usb: ehci-platform: increase EHCI_MAX_RSTS to 4
  usb: ohci-at91: Set RemoteWakeupConnected bit explicitly.
  USB: serial: fix potential NULL-dereference at probe
  xhci: use default USB_RESUME_TIMEOUT when resuming ports.
  xhci: workaround for hosts missing CAS bit
  xhci: add restart quirk for Intel Wildcatpoint PCH
  USB: serial: cp210x: fix tiocmget error handling
  wusb: fix error return code in wusb_prf()
  Revert "Documentation: devicetree: dwc2: Deprecate g-tx-fifo-size"
  Revert "usb: dwc2: gadget: fix TX FIFO size and address initialization"
  Revert "usb: dwc2: gadget: change variable name to more meaningful"
  USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7
  wusb: Stop using the stack for sg crypto scratch space
  usb: dwc3: Fix size used in dma_free_coherent()
  usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable
  ...

The recent changes, which forced the registration of the boot cpu on UP
systems, which do not have ACPI tables, have been fixed for systems w/o
local APIC, but left a wreckage for systems which have neither ACPI nor
mptables, but the CPU has an APIC, e.g. virtualbox.

The boot process crashes in prefill_possible_map() as it wants to register
the boot cpu, which needs to access the local apic, but the local APIC is
not yet mapped.

There is no reason why init_apic_mapping() can't be invoked before
prefill_possible_map(). So instead of playing another silly early mapping
game, as the ACPI/mptables code does, we just move init_apic_mapping()
before the call to prefill_possible_map().

In hindsight, I should have noticed that combination earlier.

Sorry for the churn (also in stable)!

Fixes: ff856051 ("x86/boot/smp: Don't try to poke disabled/non-existent APIC")
Reported-and-debugged-by: Michal Necasek <michal.necasek@oracle.com>
Reported-and-tested-by: Wolfgang Bauer <wbauer@tmo.at>
Cc: prarit@redhat.com
Cc: ville.syrjala@linux.intel.com
Cc: michael.thayer@oracle.com
Cc: knut.osmundsen@oracle.com
Cc: frank.mehnert@oracle.com
Cc: Borislav Petkov <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1610282114380.5053@nanosSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Pull ACPI fixes from Rafael Wysocki:
 "These fix recent ACPICA regressions, an older PCI IRQ management
  regression, and an incorrect return value of a function in the APEI
  code.

  Specifics:

   - Fix three ACPICA issues related to the interpreter locking and
     introduced by recent changes in that area (Lv Zheng).

   - Fix a PCI IRQ management regression introduced during the 4.7 cycle
     and related to the configuration of shared IRQs on systems with an
     ISA bus (Sinan Kaya).

   - Fix up a return value of one function in the APEI code (Punit
     Agrawal)"

* tag 'acpi-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
  ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method()
  ACPICA: Dispatcher: Fix order issue of method termination
  ACPI / APEI: Fix incorrect return value of ghes_proc()
  ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs
  ACPI/PCI: pci_link: penalize SCI correctly
  ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages

Pull power management fixes from Rafael Wysocki:
 "These fix two intel_pstate issues related to the way it works when the
  scaling_governor sysfs attribute is set to "performance" and fix up
  messages in the system suspend core code.

  Specifics:

   - Fix a missing KERN_CONT in a system suspend message by converting
     the affected code to using pr_info() and pr_cont() instead of the
     "raw" printk() (Jon Hunter).

   - Make intel_pstate set the CPU P-state from its .set_policy()
     callback when the scaling_governor sysfs attribute is set to
     "performance" so that it interacts with NOHZ_FULL more predictably
     which was the case before 4.7 (Rafael Wysocki).

   - Make intel_pstate always request the maximum allowed P-state when
     the scaling_governor sysfs attribute is set to "performance" to
     prevent it from effectively ingoring that setting is some
     situations (Rafael Wysocki)"

* tag 'pm-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Always set max P-state in performance mode
  PM / suspend: Fix missing KERN_CONT for suspend message
  cpufreq: intel_pstate: Set P-state upfront in performance mode

Pull ARC updates from Vineet Gupta:

 - support IDU intc for UP builds

 - support gz, lzma compressed uImage [Daniel Mentz]

 - adjust /proc/cpuinfo for non-continuous cpu ids [Noam Camus]

 - syscall for userspace cmpxchg assist for configs lacking hardware atomics

 - rework of boot log printing mainly for identifying older arc700 cores

 - retiring some old code, build toggles

* tag 'arc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: module: print pretty section names
  ARC: module: elide loop to save reference to .eh_frame
  ARC: mm: retire ARC_DBG_TLB_MISS_COUNT...
  ARC: build: retire old toggles
  ARC: boot log: refactor cpu name/release printing
  ARC: boot log: remove awkward space comma from MMU line
  ARC: boot log: don't assume SWAPE instruction support
  ARC: boot log: refactor printing abt features not captured in BCRs
  ARCv2: boot log: print IOC exists as well as enabled status
  ARCv2: IOC: use @ioc_enable not @ioc_exist where intended
  ARC: syscall for userspace cmpxchg assist
  ARC: fix build warning in elf.h
  ARC: Adjust cpuinfo for non-continuous cpu ids
  ARC: [build] Support gz, lzma compressed uImage
  ARCv2: intc: untangle SMP, MCIP and IDU

* acpica-fixes:
  ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
  ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method()
  ACPICA: Dispatcher: Fix order issue of method termination

* acpi-pci-fixes:
  ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs
  ACPI/PCI: pci_link: penalize SCI correctly
  ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages

* acpi-apei-fixes:
  ACPI / APEI: Fix incorrect return value of ghes_proc()

In the code path of acpi_ev_initialize_region(), there is namespace
modification code unlocked. This patch tunes the code to make sure
such modification are always locked.

Fixes: 74f51b80 (ACPICA: Namespace: Fix dynamic table loading issues)
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

There is a lock unbalanced exit path in acpi_ds_initialize_method(),
this patch corrects it.

Fixes: 441ad11d (ACPICA: Dispatcher: Fix a mutex issue for method auto serialization)
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The last step of the method termination should be the end of the method
serialization. Otherwise, the steps happening after it will face the race
issues that cannot be protected by the method serialization mechanism.

This patch fixes this issue by moving the per-method-object deletion code
prior than the end of the method serialization. Otherwise, the possible
race issues may result in AE_ALREADY_EXISTS error in a parallel
environment.

Fixes: 74f51b80 (ACPICA: Namespace: Fix dynamic table loading issues)
Reported-and-tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull powerpc fixes from Michael Ellerman:
 "Fixes marked for stable:
   - Convert cmp to cmpd in idle enter sequence (Segher Boessenkool)
   - cxl: Fix leaking pid refs in some error paths (Vaibhav Jain)
   - Re-fix race condition between going idle and entering guest (Paul Mackerras)
   - Fix race condition in setting lock bit in idle/wakeup code (Paul Mackerras)
   - radix: Use tlbiel only if we ever ran on the current cpu (Aneesh Kumar K.V)
   - relocation, register save fixes for system reset interrupt (Nicholas Piggin)

  Fixes for code merged this cycle:
   - Fix CONFIG_ALIVEC typo in restore_tm_state() (Valentin Rothberg)
   - KVM: PPC: Book3S HV: Fix build error when SMP=n (Michael Ellerman)"

* tag 'powerpc-4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: relocation, register save fixes for system reset interrupt
  powerpc/mm/radix: Use tlbiel only if we ever ran on the current cpu
  powerpc/process: Fix CONFIG_ALIVEC typo in restore_tm_state()
  powerpc/64: Fix race condition in setting lock bit in idle/wakeup code
  powerpc/64: Re-fix race condition between going idle and entering guest
  cxl: Fix leaking pid refs in some error paths
  powerpc: Convert cmp to cmpd in idle enter sequence
  KVM: PPC: Book3S HV: Fix build error when SMP=n

* pm-cpufreq-fixes:
  cpufreq: intel_pstate: Always set max P-state in performance mode
  cpufreq: intel_pstate: Set P-state upfront in performance mode

* pm-sleep-fixes:
  PM / suspend: Fix missing KERN_CONT for suspend message

Pull perf fixes from Ingo Molnar:
 "Misc kernel fixes: a virtualization environment related fix, an uncore
  PMU driver removal handling fix, a PowerPC fix and new events for
  Knights Landing"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Honour the CPUID for number of fixed counters in hypervisors
  perf/powerpc: Don't call perf_event_disable() from atomic context
  perf/core: Protect PMU device removal with a 'pmu_bus_running' check, to fix CONFIG_DEBUG_TEST_DRIVER_REMOVE=y kernel panic
  perf/x86/intel/cstate: Add C-state residency events for Knights Landing

Pull libnvdimm fixes from Dan Williams:
 "A build fix, a NULL de-reference found by static analysis, a misuse of
  the percpu_ref_exit() (tagged for -stable), and notification of failed
  attempts to clear media errors.

  These patches have received a build success notification from the
  0day- kbuild-robot and appeared in next-20161028"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: fix percpu_ref_exit ordering
  nvdimm: make CONFIG_NVDIMM_DAX 'bool'
  pmem: report error on clear poison failure
  libnvdimm, namespace: potential NULL deref on allocation error

Pull arm64 fixes from Will Deacon:
 "Three arm64 fixes for -rc3.  They're all pretty straightforward: a
  couple of NUMA issues from the Huawei folks and a thinko in
  __page_to_voff that seems to be benign, but is certainly better off
  fixed.

  Summary:
   - couple of NUMA fixes
   - thinko in __page_to_voff"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: fix __page_to_voff definition
  arm64/numa: fix incorrect log for memory-less node
  arm64/numa: fix pcpu_cpu_distance() to get correct CPU proximity

Pull x86 fixes from Ingo Molnar:
 "Misc fixes: three build fixes, an unwinder fix and a microcode loader
  fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode/AMD: Fix more fallout from CONFIG_RANDOMIZE_MEMORY=y
  x86: Fix export for mcount and __fentry__
  x86/quirks: Hide maybe-uninitialized warning
  x86/build: Fix build with older GCC versions
  x86/unwind: Fix empty stack dereference in guess unwinder

Pull timer fixes from Ingo Molnar:
 "Fix four timer locking races: two were noticed by Linus while
  reviewing the code while chasing for a corruption bug, and two
  from fixing spurious USB timeouts"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Prevent base clock corruption when forwarding
  timers: Prevent base clock rewind when forwarding clock
  timers: Lock base for same bucket optimization
  timers: Plug locking race vs. timer migration

Merge branches 'core-urgent-for-linus', 'irq-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool, irq and scheduler fixes from Ingo Molnar:
 "One more objtool fixlet for GCC6 code generation patterns, an irq
  DocBook fix and an unused variable warning fix in the scheduler"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix rare switch jump table pattern detection

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  doc: Add missing parameter for msi_setup

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Remove unused but set variable 'rq'