- 19 Jul, 2020 40 commits
-
-
Ezequiel Garcia authored
The hardware only supports 4:2:0 or 4:0:0 (monochrome), 8-bit depth content. Verify that the SPS refers to a supported bitstream, and refuse unsupported bitstreams by failing at TRY_EXT_CTRLS time. Given the JPEG compression level control is the only one that needs setting, a specific ops is provided. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Ezequiel Garcia authored
The hardware only supports 4:2:2, 4:2:0 or 4:0:0 (monochrome), 8-bit or 10-bit depth content. Verify that the SPS refers to a supported bitstream, and refuse unsupported bitstreams by failing at TRY_EXT_CTRLS time. The driver is currently broken on 10-bit and 4:2:2 so disallow those as well. Signed-off-by:
-
Ezequiel Garcia authored
Commit 986eee3a ("media: hantro: Prevent encoders from using post-processing") fixed hantro_needs_postproc condition, but missed one case. Encoders don't have any post-processor hardware block, so also can't be disabled. Fix it. Fixes: 986eee3a ("media: hantro: Prevent encoders from using post-processing") Signed-off-by:
-
Ezequiel Garcia authored
The driver doesn't need the bytesused argument. For decoders, the plane bytesused is known and therefore, buf_prepare is used to set it. For encoders, it's handled by the codec_ops.done hook. Signed-off-by:
-
Ezequiel Garcia authored
hantro_enc_buf_finish is used only for JPEG, and so should be moved to JPEG codec_ops.done. This cleanup is also taking care of addressing a subtle issue: checking the non-NULL bounce buffer using ctx->jpeg_enc, which is a member of a union is confusing and error-prone. Note that the issue is currently innocuous because an encoder context only supports JPEG. The codec_ops.done has an argument that codec-specific code shouldn't need, so drop that as well. Signed-off-by:
-
Ezequiel Garcia authored
So far we've been using the .buf_finish hook to distinguish decoder from encoder. This is unnecessarily obfuscated. Moreover, we want to move the buf_finish, so use a cleaner scheme to distinguish the driver decoder/encoder type. Signed-off-by:
-
Ezequiel Garcia authored
Commit e17f08e3 ("media: hantro: Do not reorder H264 scaling list") removed the scaling list reordering, which was wrong and not needed. However, the name of the function stayed, which is confusing for anyone reading the code. Rename from "reorder" to "assemble" which is cleaner. This is just a cosmetic cleanup. Signed-off-by:
-
Ezequiel Garcia authored
The generic H264 reference list builder moved all the users of this macro, but left the macro. Remove it. Signed-off-by:
-
Dafna Hirschfeld authored
Fix two spelling typos in file rkisp1-config.h. Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Dafna Hirschfeld authored
The macro RKISP1_CIF_ISP_AWB_MODE_YCBCR_EN is defined twice. Remove the second define. Signed-off-by:
-
Dafna Hirschfeld authored
Currently the stats are read in a work queue. Defering the reading of the stats is not needed and it is fine to read them inside the irq handler. This patch fixes and remove the TODO item: 'Use threaded interrupt for rkisp1_stats_isr(), remove work queue.' Signed-off-by:
-
Dafna Hirschfeld authored
This patch removes two locks in the rkisp1_stats struct: - The mutex 'wq_lock' that is used to protect the buffers list 'stat' - The spin_lock 'irq_lock' that is used to protect the variable 'is_streaming' It replaces them with one spin_lock 'lock' that protects both the buffers list and the 'is_streaming' variable. In later patch the reading of the statistics will move to the isr so there will be no need for the mutex 'wq_lock' Signed-off-by:
-
Dafna Hirschfeld authored
The function 'rkisp1_stats_vb2_stop_streaming' runs in user context therefore it is enough to use spin_lock_irq Signed-off-by:
-
Dafna Hirschfeld authored
The mask of the ready statistics flags is used in several places in the code using bitwise-or. Use a macro for that to make the code more readable. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Implementation of media controller centric device configuration will add code to the CAMERARX support section, which is already quite big. Move it to a separate file to make the code more manageable. No functional change is included. The cal_camerarx_init_regmap() function is kept in cal.c and renamed to cal_init_camerarx_regmap() as it's not specific to one CAMERARX instance, but related to the whole CAL device. Signed-off-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
-
Laurent Pinchart authored
To prepare for the split of the camerarx code to a separate file, move the CAL I/O accessors to cal.h. This requires renaming the accessors with a cal_prefix, as the current names are too generic and prone to namespace clashes. The reg_read() and read_write() macros, that cover both CAL and CAMERARX register access, are split in two groups of inline functions, one for CAL access and one for CAMERARX access. Signed-off-by:
-
Laurent Pinchart authored
To prepare for implementation of media controller centric device configuration, move all the video node handling support to a separate file. Signed-off-by:
-
Laurent Pinchart authored
Specifying 'int' explicitly is generally preferred in the kernel for unsigned int types. Fix the only wrong occurrence. Signed-off-by:
-
Laurent Pinchart authored
The phy->sensor NULL check in cal_camerarx_get_external_rate() is not needed, as the V4L2 video devices are only registered when the sensor is bound. Remove it. Signed-off-by:
-
Laurent Pinchart authored
The external pixel rate is retrieved when starting the camerarx and only used then. There's no need to store it in the cal_camerarx structure, it can be returned by cal_camerarx_get_external_info() and explicitly passed to cal_camerarx_config(). While at it, rename cal_camerarx_get_external_info() to cal_camerarx_get_external_rate() to better reflect the function's purpose. Signed-off-by:
-
Laurent Pinchart authored
Refactor the camerarx start and stop procedure to group all the corresponding operations in two functions, cal_camerarx_start() and cal_camerarx_stop() instead of splitting them in multiple steps called from the vb2 stream start and stop functions. This reduces the coupling between the camerarx and the contexts, and better models the camerarx hardware. The cal_camerarx_start() is a reworked version of cal_camerarx_init() with the description of the start procedure updated to match the AM65x, DRA7[124567]x and DRA80xM TRMs. The cal_camerarx_wait_ready() function is inlined in cal_camerarx_start() to better describe the start procedure. No functional change is included in the camerarx start and stop procedures themselves, but the interleaving of the start steps with the context configuration has been changed in cal_start_streaming(). Signed-off-by:
-
Laurent Pinchart authored
To prepare for the camerarx refactoring, reorder functions without any functional change to ease review of the refactoring itself. Signed-off-by:
-
Laurent Pinchart authored
The cal_camerarx_max_lanes() function is a one-liner that has a single caller. It doesn't improve readability. Inline it in its caller. Signed-off-by:
-
Laurent Pinchart authored
To avoid making the cal_ctx structure layoug depend on the size of the cal_formats array, allocate the active_fmt array dynamically. This prepares for splitting the driver in multiple files. Signed-off-by:
-
Laurent Pinchart authored
To prepare for splitting the V4L2 API support to a separate file, call cal_ctx_v4l2_init_formats() from cal_ctx_v4l2_register(). Signed-off-by:
-
Laurent Pinchart authored
Enable the media controller API by registering a media device and initializing the media entities corresponding to the video devices. The context initialization is slightly refactored as a result. The media graph will be built in a subsequent change. Signed-off-by:
-
Laurent Pinchart authored
The cal_dev structure stores the platform_device pointer, but most accesses to that field need the device pointer. Store the struct device pointer directly to simplify the code, and use to_platform_device() in the two locations that need the platform device. Signed-off-by:
-
Laurent Pinchart authored
Print the hardware revision in the X.Y.R format, which is more readable that the 32-bit hex value. For the hardware info register, only print its value if it doesn't contain what we expect. Signed-off-by:
-
Laurent Pinchart authored
Read the hardware revision and info right after allocating resources, as there's no need to delay doing so until all initialization is complete. Signed-off-by:
-
Laurent Pinchart authored
Create four functions to handle initialization, cleanup, registration and unregistration of the V4L2 (and soon media controller) objects: - init() is meant to be called early at probe time to initialize the objects, before they get used from within the kernel - cleanup() is the counterpart of init, and is meant to be called at the end of the remove sequence to free all objects - register() is meant to be called at the end of the probe sequence, to register the userspace-facing devices - unregister() is the counterpart of register, and is meant to be called at the beginning for the remove sequence, to disallow access from userspace Signed-off-by:
-
Laurent Pinchart authored
Use the CAL_NUM_CSI2_PORTS macro instead of the hardcoded numerical value 2 to iterate over the CSI-2 ports. Signed-off-by:
-
Laurent Pinchart authored
The isvcirqset() isn't used. The isportirqset() doesn't increase readability. Inline the latter and simply drop the former. Signed-off-by:
-
Laurent Pinchart authored
The CAL_NUM_CSI2_PORTS macro isn't a register definition. Move it to cal.c, and fix indentation of the other macros while at it. Signed-off-by:
-
Laurent Pinchart authored
The driver happens the use the same number of CAMERARX and context, but coupling their cleanup at remove time is wrong. To prepare for the introduction of additional contexts, decouple the two. Signed-off-by:
-
Laurent Pinchart authored
The cal_quickdump_regs() dumps registers for the two CAMERARX instances. Retrieve those instances from the cal_dev directly instead of going through the contexts, and simplify the code by using a loop. Signed-off-by:
-
Laurent Pinchart authored
The async notifier is meant to bind to subdevs connected to the CSI-2 ports. Those ports are modelled by the CAMERARX phy instances. To prepare for additional decoupling of contexts and phys, make the notifier operate on phys. We still initialize and register the context V4L2 support in the async notifier complete operation as that's our signal that the userspace API is ready to be exposed. Signed-off-by:
-
Laurent Pinchart authored
There's no need to create one async notifier per CAL context. Merge them all in a single notifier, stored in cal_dev. Signed-off-by:
-
Laurent Pinchart authored
The subdev notifier handling assumes a 1:1 mapping between CAL contexts and notifiers. To prepare for merging the multiple notifiers into a single one, retrieve the CAL context from the async subdev structure instead of from the notifier. Signed-off-by:
-
Laurent Pinchart authored
The initialization of the context based on the connected sensor is split between the async notifier .bound() and .complete() operations. Move it all to a separate function and call it from .bound() operation to prepare for the move of the notifiers from the contexts to the cal_dev. Only V4L2 registration is kept in the .complete() operation. Signed-off-by:
-
Laurent Pinchart authored
Use ARRAY_SIZE(cal->ctx) to iterate over the cal->ctx array instead of using the numerical value from the CAL_NUM_CONTEXT macro (or, worse, hardcoding the value 2). This will allow reworking contexts with less changes in the code. Signed-off-by:
-
