Pull s390 updates from Vasily Gorbik:

 - Raise minimum supported machine generation to z10, which comes with
   various cleanups and code simplifications (usercopy/spectre
   mitigation/etc).

 - Rework extables and get rid of anonymous out-of-line fixups.

 - Page table helpers cleanup. Add set_pXd()/set_pte() helper functions.
   Covert pte_val()/pXd_val() macros to functions.

 - Optimize kretprobe handling by avoiding extra kprobe on
   __kretprobe_trampoline.

 - Add support for CEX8 crypto cards.

 - Allow to trigger AP bus rescan via writing to /sys/bus/ap/scans.

 - Add CONFIG_EXPOLINE_EXTERN option to build the kernel without COMDAT
   group sections which simplifies kpatch support.

 - Always use the packed stack layout and extend kernel unwinder tests.

 - Add sanity checks for ftrace code patching.

 - Add s390dbf debug log for the vfio_ap device driver.

 - Various virtual vs physical address confusion fixes.

 - Various small fixes and improvements all over the code.

* tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (69 commits)
  s390/test_unwind: add kretprobe tests
  s390/kprobes: Avoid additional kprobe in kretprobe handling
  s390: convert ".insn" encoding to instruction names
  s390: assume stckf is always present
  s390/nospec: move to single register thunks
  s390: raise minimum supported machine generation to z10
  s390/uaccess: Add copy_from/to_user_key functions
  s390/nospec: align and size extern thunks
  s390/nospec: add an option to use thunk-extern
  s390/nospec: generate single register thunks if possible
  s390/pci: make zpci_set_irq()/zpci_clear_irq() static
  s390: remove unused expoline to BC instructions
  s390/irq: use assignment instead of cast
  s390/traps: get rid of magic cast for per code
  s390/traps: get rid of magic cast for program interruption code
  s390/signal: fix typo in comments
  s390/asm-offsets: remove unused defines
  s390/test_unwind: avoid build warning with W=1
  s390: remove .fixup section
  s390/bpf: encode register within extable entry
  ...

Pull Xtensa updates from Max Filippov:

 - remove dependency on the compiler's libgcc

 - allow selection of internal kernel ABI via Kconfig

 - enable compiler plugins support for gcc-12 or newer

 - various minor cleanups and fixes

* tag 'xtensa-20220325' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: define update_mmu_tlb function
  xtensa: fix xtensa_wsr always writing 0
  xtensa: enable plugin support
  xtensa: clean up kernel exit assembly code
  xtensa: rearrange NMI exit path
  xtensa: merge stack alignment definitions
  xtensa: fix DTC warning unit_address_format
  xtensa: fix stop_machine_cpuslocked call in patch_text
  xtensa: make secondary reset vector support conditional
  xtensa: add kernel ABI selection to Kconfig
  xtensa: don't link with libgcc
  xtensa: add helpers for division, remainder and shifts
  xtensa: add missing XCHAL_HAVE_WINDOWED check
  xtensa: use XCHAL_NUM_AREGS as pt_regs::areg size
  xtensa: rename PT_SIZE to PT_KERNEL_SIZE
  xtensa: Remove unused early_read_config_byte() et al declarations
  xtensa: use strscpy to copy strings
  net: xtensa: use strscpy to copy strings

Pull powerpc updates from Michael Ellerman:
 "Livepatch support for 32-bit is probably the standout new feature,
  otherwise mostly just lots of bits and pieces all over the board.

  There's a series of commits cleaning up function descriptor handling,
  which touches a few other arches as well as LKDTM. It has acks from
  Arnd, Kees and Helge.

  Summary:

   - Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.

   - Add support for livepatch to 32-bit.

   - Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.

   - Merge vdso64 and vdso32 into a single directory.

   - Fix build errors with newer binutils.

   - Add support for UADDR64 relocations, which are emitted by some
     toolchains. This allows powerpc to build with the latest lld.

   - Fix (another) potential userspace r13 corruption in transactional
     memory handling.

   - Cleanups of function descriptor handling & related fixes to LKDTM.

  Thanks to Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh
  Kumar K.V, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar
  Chowdhury, Cédric Le Goater, Chen Jingwen, Christophe JAILLET,
  Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel Henrique
  Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu
  Hua, Haren Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason
  Wang, Jeremy Kerr, Joachim Wiberg, Jordan Niethe, Julia Lawall, Kajol
  Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mamatha Inamdar,
  Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal Suchanek,
  Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
  Nour-eddine Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy
  Dunlap, Ritesh Harjani, Rohan McLure, Russell Currey, Sachin Sant,
  Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain, Thierry Reding,
  Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean,
  Wedson Almeida Filho, and YueHaibing"

* tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
  powerpc/pseries: Fix use after free in remove_phb_dynamic()
  powerpc/time: improve decrementer clockevent processing
  powerpc/time: Fix KVM host re-arming a timer beyond decrementer range
  powerpc/tm: Fix more userspace r13 corruption
  powerpc/xive: fix return value of __setup handler
  powerpc/64: Add UADDR64 relocation support
  powerpc: 8xx: fix a return value error in mpc8xx_pic_init
  powerpc/ps3: remove unneeded semicolons
  powerpc/64: Force inlining of prevent_user_access() and set_kuap()
  powerpc/bitops: Force inlining of fls()
  powerpc: declare unmodified attribute_group usages const
  powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
  powerpc/secvar: fix refcount leak in format_show()
  powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E
  powerpc: Move C prototypes out of asm-prototypes.h
  powerpc/kexec: Declare kexec_paca static
  powerpc/smp: Declare current_set static
  powerpc: Cleanup asm-prototypes.c
  powerpc/ftrace: Use STK_GOT in ftrace_mprofile.S
  powerpc/ftrace: Regroup PPC64 specific operations in ftrace_mprofile.S
  ...

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for QCN550x (ath79)

 - enabled KCSAN

 - removed TX39XX support

 - various cleanups and fixes

* tag 'mips_5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (31 commits)
  MIPS: Fix build error for loongson64 and sgi-ip27
  MIPS: ingenic: correct unit node address
  MIPS: Fix wrong comments in asm/prom.h
  MIPS: Remove redundant definitions of device_tree_init()
  MIPS: Remove redundant check in device_tree_init()
  MIPS: pgalloc: fix memory leak caused by pgd_free()
  MIPS: RB532: fix return value of __setup handler
  MIPS: Only use current_stack_pointer on GCC
  MIPS: boot/compressed: Use array reference for image bounds
  mips: cdmm: Fix refcount leak in mips_cdmm_phys_base
  mips: remove reference to "newer Loongson-3"
  mips: Always permit to build u-boot images
  MIPS: Sanitise Cavium switch cases in TLB handler synthesizers
  DEC: Limit PMAX memory probing to R3k systems
  mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n
  MIPS: fix fortify panic when copying asm exception handlers
  mips: ralink: fix a refcount leak in ill_acc_of_setup()
  mips: Implement "current_stack_pointer"
  MIPS: Remove TX39XX support
  MIPS: Modernize READ_IMPLIES_EXEC
  ...

Pull iommu updates from Joerg Roedel:

 - IOMMU Core changes:
      - Removal of aux domain related code as it is basically dead and
        will be replaced by iommu-fd framework
      - Split of iommu_ops to carry domain-specific call-backs separatly
      - Cleanup to remove useless ops->capable implementations
      - Improve 32-bit free space estimate in iova allocator

 - Intel VT-d updates:
      - Various cleanups of the driver
      - Support for ATS of SoC-integrated devices listed in ACPI/SATC
        table

 - ARM SMMU updates:
      - Fix SMMUv3 soft lockup during continuous stream of events
      - Fix error path for Qualcomm SMMU probe()
      - Rework SMMU IRQ setup to prepare the ground for PMU support
      - Minor cleanups and refactoring

 - AMD IOMMU driver:
      - Some minor cleanups and error-handling fixes

 - Rockchip IOMMU driver:
      - Use standard driver registration

 - MSM IOMMU driver:
      - Minor cleanup and change to standard driver registration

 - Mediatek IOMMU driver:
      - Fixes for IOTLB flushing logic

* tag 'iommu-updates-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (47 commits)
  iommu/amd: Improve amd_iommu_v2_exit()
  iommu/amd: Remove unused struct fault.devid
  iommu/amd: Clean up function declarations
  iommu/amd: Call memunmap in error path
  iommu/arm-smmu: Account for PMU interrupts
  iommu/vt-d: Enable ATS for the devices in SATC table
  iommu/vt-d: Remove unused function intel_svm_capable()
  iommu/vt-d: Add missing "__init" for rmrr_sanity_check()
  iommu/vt-d: Move intel_iommu_ops to header file
  iommu/vt-d: Fix indentation of goto labels
  iommu/vt-d: Remove unnecessary prototypes
  iommu/vt-d: Remove unnecessary includes
  iommu/vt-d: Remove DEFER_DEVICE_DOMAIN_INFO
  iommu/vt-d: Remove domain and devinfo mempool
  iommu/vt-d: Remove iova_cache_get/put()
  iommu/vt-d: Remove finding domain in dmar_insert_one_dev_info()
  iommu/vt-d: Remove intel_iommu::domains
  iommu/mediatek: Always tlb_flush_all when each PM resume
  iommu/mediatek: Add tlb_lock in tlb_flush_all
  iommu/mediatek: Remove the power status checking in tlb flush all
  ...

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (qla2xxx, pm8001,
  libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
  and bug fixes.

  The high blast radius core update is the removal of write same, which
  affects block and several non-SCSI devices. The other big change,
  which is more local, is the removal of the SCSI pointer"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
  scsi: scsi_ioctl: Drop needless assignment in sg_io()
  scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
  scsi: lpfc: Copyright updates for 14.2.0.0 patches
  scsi: lpfc: Update lpfc version to 14.2.0.0
  scsi: lpfc: SLI path split: Refactor BSG paths
  scsi: lpfc: SLI path split: Refactor Abort paths
  scsi: lpfc: SLI path split: Refactor SCSI paths
  scsi: lpfc: SLI path split: Refactor CT paths
  scsi: lpfc: SLI path split: Refactor misc ELS paths
  scsi: lpfc: SLI path split: Refactor VMID paths
  scsi: lpfc: SLI path split: Refactor FDISC paths
  scsi: lpfc: SLI path split: Refactor LS_RJT paths
  scsi: lpfc: SLI path split: Refactor LS_ACC paths
  scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
  scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
  scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
  scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
  scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
  scsi: lpfc: SLI path split: Refactor lpfc_iocbq
  scsi: lpfc: Use kcalloc()
  ...

Merge tag 'for-5.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Significant refactoring and fixing of how DM core does bio-based IO
   accounting with focus on fixing wildly inaccurate IO stats for
   dm-crypt (and other DM targets that defer bio submission in their own
   workqueues). End result is proper IO accounting, made possible by
   targets being updated to use the new dm_submit_bio_remap() interface.

 - Add hipri bio polling support (REQ_POLLED) to bio-based DM.

 - Reduce dm_io and dm_target_io structs so that a single dm_io (which
   contains dm_target_io and first clone bio) weighs in at 256 bytes.
   For reference the bio struct is 128 bytes.

 - Various other small cleanups, fixes or improvements in DM core and
   targets.

 - Update MAINTAINERS with my kernel.org email address to allow
   distinction between my "upstream" and "Red" Hats.

* tag 'for-5.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (46 commits)
  dm: consolidate spinlocks in dm_io struct
  dm: reduce size of dm_io and dm_target_io structs
  dm: switch dm_target_io booleans over to proper flags
  dm: switch dm_io booleans over to proper flags
  dm: update email address in MAINTAINERS
  dm: return void from __send_empty_flush
  dm: factor out dm_io_complete
  dm cache: use dm_submit_bio_remap
  dm: simplify dm_sumbit_bio_remap interface
  dm thin: use dm_submit_bio_remap
  dm: add WARN_ON_ONCE to dm_submit_bio_remap
  dm: support bio polling
  block: add ->poll_bio to block_device_operations
  dm mpath: use DMINFO instead of printk with KERN_INFO
  dm: stop using bdevname
  dm-zoned: remove the ->name field in struct dmz_dev
  dm: remove unnecessary local variables in __bind
  dm: requeue IO if mapping table not yet available
  dm io: remove stale comment block for dm_io()
  dm thin metadata: remove unused dm_thin_remove_block and __remove
  ...

Pull rdma updates from Jason Gunthorpe:

 - Minor bug fixes in mlx5, mthca, pvrdma, rtrs, mlx4, hfi1, hns

 - Minor cleanups: coding style, useless includes and documentation

 - Reorganize how multicast processing works in rxe

 - Replace a red/black tree with xarray in rxe which improves performance

 - DSCP support and HW address handle re-use in irdma

 - Simplify the mailbox command handling in hns

 - Simplify iser now that FMR is eliminated

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (93 commits)
  RDMA/nldev: Prevent underflow in nldev_stat_set_counter_dynamic_doit()
  IB/iser: Fix error flow in case of registration failure
  IB/iser: Generalize map/unmap dma tasks
  IB/iser: Use iser_fr_desc as registration context
  IB/iser: Remove iser_reg_data_sg helper function
  RDMA/rxe: Use standard names for ref counting
  RDMA/rxe: Replace red-black trees by xarrays
  RDMA/rxe: Shorten pool names in rxe_pool.c
  RDMA/rxe: Move max_elem into rxe_type_info
  RDMA/rxe: Replace obj by elem in declaration
  RDMA/rxe: Delete _locked() APIs for pool objects
  RDMA/rxe: Reverse the sense of RXE_POOL_NO_ALLOC
  RDMA/rxe: Replace mr by rkey in responder resources
  RDMA/rxe: Fix ref error in rxe_av.c
  RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT
  RDMA/irdma: Add support for address handle re-use
  RDMA/qib: Fix typos in comments
  RDMA/mlx5: Fix memory leak in error flow for subscribe event routine
  Revert "RDMA/core: Fix ib_qp_usecnt_dec() called when error"
  RDMA/rxe: Remove useless argument for update_state()
  ...

Pull ceph updates from Ilya Dryomov:
 "The highlights are:

   - several changes to how snap context and snap realms are tracked
     (Xiubo Li). In particular, this should resolve a long-standing
     issue of high kworker CPU usage and various stalls caused by
     needless iteration over all inodes in the snap realm.

   - async create fixes to address hangs in some edge cases (Jeff
     Layton)

   - support for getvxattr MDS op for querying server-side xattrs, such
     as file/directory layouts and ephemeral pins (Milind Changire)

   - average latency is now maintained for all metrics (Venky Shankar)

   - some tweaks around handling inline data to make it fit better with
     netfs helper library (David Howells)

  Also a couple of memory leaks got plugged along with a few assorted
  fixups. Last but not least, Xiubo has stepped up to serve as a CephFS
  co-maintainer"

* tag 'ceph-for-5.18-rc1' of https://github.com/ceph/ceph-client: (27 commits)
  ceph: fix memory leak in ceph_readdir when note_last_dentry returns error
  ceph: uninitialized variable in debug output
  ceph: use tracked average r/w/m latencies to display metrics in debugfs
  ceph: include average/stdev r/w/m latency in mds metrics
  ceph: track average r/w/m latency
  ceph: use ktime_to_timespec64() rather than jiffies_to_timespec64()
  ceph: assign the ci only when the inode isn't NULL
  ceph: fix inode reference leakage in ceph_get_snapdir()
  ceph: misc fix for code style and logs
  ceph: allocate capsnap memory outside of ceph_queue_cap_snap()
  ceph: do not release the global snaprealm until unmounting
  ceph: remove incorrect and unused CEPH_INO_DOTDOT macro
  MAINTAINERS: add Xiubo Li as cephfs co-maintainer
  ceph: eliminate the recursion when rebuilding the snap context
  ceph: do not update snapshot context when there is no new snapshot
  ceph: zero the dir_entries memory when allocating it
  ceph: move to a dedicated slabcache for ceph_cap_snap
  ceph: add getvxattr op
  libceph: drop else branches in prepare_read_data{,_cont}
  ceph: fix comments mentioning i_mutex
  ...

Pull xfs updates from Darrick Wong:
 "The biggest change this cycle is bringing XFS' inode attribute setting
  code back towards alignment with what the VFS does. IOWs, setgid bit
  handling should be a closer match with ext4 and btrfs behavior.

  The rest of the branch is bug fixes around the filesystem -- patching
  gaps in quota enforcement, removing bogus selinux audit messages, and
  fixing log corruption and problems with log recovery. There will be a
  second pull request later on in the merge window with more bug fixes.

  Dave Chinner will be taking over as XFS maintainer for one release
  cycle, starting from the day 5.18-rc1 drops until 5.19-rc1 is tagged
  so that I can focus on starting a massive design review for the
  (feature complete after five years) online repair feature.

  Summary:

   - Fix some incorrect mapping state being passed to iomap during COW

   - Don't create bogus selinux audit messages when deciding to degrade
     gracefully due to lack of privilege

   - Fix setattr implementation to use VFS helpers so that we drop
     setgid consistently with the other filesystems

   - Fix link/unlink/rename to check quota limits

   - Constify xfs_name_dotdot to prevent abuse of in-kernel symbols

   - Fix log livelock between the AIL and inodegc threads during
     recovery

   - Fix a log stall when the AIL races with pushers

   - Fix stalls in CIL flushes due to pinned inode cluster buffers
     during recovery

   - Fix log corruption due to incorrect usage of xfs_is_shutdown vs
     xlog_is_shutdown because during an induced fs shutdown, AIL
     writeback must continue until the log is shut down, even if the
     filesystem has already shut down"

* tag 'xfs-5.18-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: xfs_is_shutdown vs xlog_is_shutdown cage fight
  xfs: AIL should be log centric
  xfs: log items should have a xlog pointer, not a mount
  xfs: async CIL flushes need pending pushes to be made stable
  xfs: xfs_ail_push_all_sync() stalls when racing with updates
  xfs: check buffer pin state after locking in delwri_submit
  xfs: log worker needs to start before intent/unlink recovery
  xfs: constify xfs_name_dotdot
  xfs: constify the name argument to various directory functions
  xfs: reserve quota for target dir expansion when renaming files
  xfs: reserve quota for dir expansion when linking/unlinking files
  xfs: refactor user/group quota chown in xfs_setattr_nonsize
  xfs: use setattr_copy to set vfs inode attributes
  xfs: don't generate selinux audit messages for capability testing
  xfs: add missing cmap->br_state = XFS_EXT_NORM update

Pull DAX updates from Dan Williams:
 "Andrew has been shepherding major dax features that touch the core -mm
  through his tree, but I still collect the dax updates that are core-mm
  independent.

   - Fix a crash due to a missing rcu_barrier() in dax_fs_exit()

   - Fix two miscellaneous doc issues"

* tag 'dax-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: Fix missing kdoc for dax_device
  dax: make sure inodes are flushed before destroy cache
  fsdax: fix function description

Pull CXL (Compute Express Link) updates from Dan Williams:
 "This development cycle extends the subsystem to discover CXL resources
  throughout a CXL/PCIe switch topology and respond to hot add/remove
  events anywhere in that topology.

  This is more foundational infrastructure in preparation for dynamic
  memory region provisioning support. Recall that CXL memory regions, as
  the new "Theory of Operation" section of
  Documentation/driver-api/cxl/memory-devices.rst describes, bring
  storage volume striping semantics to memory.

  The hot add/remove behavior is validated with extensions to the
  cxl_test unit test environment and this test in the cxl-cli test
  suite:

      https://github.com/pmem/ndctl/blob/djbw/for-74/cxl/test/cxl-topology.sh

  Summary:

   - Add a driver for 'struct cxl_memdev' objects responsible for
     CXL.mem operation as distinct from 'cxl_pci' mailbox operations.

     Its primary responsibility is enumerating an endpoint 'struct
     cxl_port' and all the 'struct cxl_port' instances between an
     endpoint and the CXL platform root.

   - Add a driver for 'struct cxl_port' objects responsible for
     enumerating and operating all Host-managed Device Memory (HDM)
     decoder resources between the platform-level CXL memory
     description, all intervening host bridges / switches, and the HDM
     resources in endpoints.

   - Update the cxl_pci driver to validate CXL.mem operation precursors
     to HDM decoder operation like ready-polling, and legacy CXL 1.1
     DVSEC based CXL.mem configuration.

   - Add basic lockdep coverage for usage of device_lock() on CXL
     subsystem objects similar to what exists for LIBNVDIMM. Include a
     compile-time switch for which subsystem to validate at run-time.

   - Update cxl_test to emulate a one level switch topology.

   - Document a "Theory of Operation" for the subsystem.

   - Add 'numa_node' and 'serial' attributes to cxl_memdev sysfs

   - Include miscellaneous fixes for spec / QEMU CXL emulation
     compatibility and static analysis reports"

* tag 'cxl-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (48 commits)
  cxl/core/port: Fix NULL but dereferenced coccicheck error
  cxl/port: Hold port reference until decoder release
  cxl/port: Fix endpoint refcount leak
  cxl/core: Fix cxl_device_lock() class detection
  cxl/core/port: Fix unregister_port() lock assertion
  cxl/regs: Fix size of CXL Capability Header Register
  cxl/core/port: Handle invalid decoders
  cxl/core/port: Fix / relax decoder target enumeration
  tools/testing/cxl: Add a physical_node link
  tools/testing/cxl: Enumerate mock decoders
  tools/testing/cxl: Mock one level of switches
  tools/testing/cxl: Fix root port to host bridge assignment
  tools/testing/cxl: Mock dvsec_ranges()
  cxl/core/port: Add endpoint decoders
  cxl/core: Move target_list out of base decoder attributes
  cxl/mem: Add the cxl_mem driver
  cxl/core/port: Add switch port enumeration
  cxl/memdev: Add numa_node attribute
  cxl/pci: Emit device serial number
  cxl/pci: Implement wait for media active
  ...

Pull drm updates from Dave Airlie:
 "Lots of work all over, Intel improving DG2 support, amdkfd CRIU
  support, msm new hw support, and faster fbdev support.

  dma-buf:
   - rename dma-buf-map to iosys-map

  core:
   - move buddy allocator to core
   - add pci/platform init macros
   - improve EDID parser deep color handling
   - EDID timing type 7 support
   - add GPD Win Max quirk
   - add yes/no helpers to string_helpers
   - flatten syncobj chains
   - add nomodeset support to lots of drivers
   - improve fb-helper clipping support
   - add default property value interface

  fbdev:
   - improve fbdev ops speed

  ttm:
   - add a backpointer from ttm bo->ttm resource

  dp:
   - move displayport headers
   - add a dp helper module

  bridge:
   - anx7625 atomic support, HDCP support

  panel:
   - split out panel-lvds and lvds bindings
   - find panels in OF subnodes

  privacy:
   - add chromeos privacy screen support

  fb:
   - hot unplug fw fb on forced removal

  simpledrm:
   - request region instead of marking ioresource busy
   - add panel oreintation property

  udmabuf:
   - fix oops with 0 pages

  amdgpu:
   - power management code cleanup
   - Enable freesync video mode by default
   - RAS code cleanup
   - Improve VRAM access for debug using SDMA
   - SR-IOV rework special register access and fixes
   - profiling power state request ioctl
   - expose IP discovery via sysfs
   - Cyan skillfish updates
   - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
   - expose benchmark tests via debugfs
   - add module param to disable XGMI for testing
   - GPU reset debugfs register dumping support

  amdkfd:
   - CRIU support
   - SDMA queue fixes

  radeon:
   - UVD suspend fix
   - iMac backlight fix

  i915:
   - minimal parallel submission for execlists
   - DG2-G12 subplatform added
   - DG2 programming workarounds
   - DG2 accelerated migration support
   - flat CCS and CCS engine support for XeHP
   - initial small BAR support
   - drop fake LMEM support
   - ADL-N PCH support
   - bigjoiner updates
   - introduce VMA resources and async unbinding
   - register definitions cleanups
   - multi-FBC refactoring
   - DG1 OPROM over SPI support
   - ADL-N platform enabling
   - opregion mailbox #5 support
   - DP MST ESI improvements
   - drm device based logging
   - async flip optimisation for DG2
   - CPU arch abstraction fixes
   - improve GuC ADS init to work on aarch64
   - tweak TTM LRU priority hint
   - GuC 69.0.3 support
   - remove short term execbuf pins

  nouveau:
   - higher DP/eDP bitrates
   - backlight fixes

  msm:
   - dpu + dp support for sc8180x
   - dp support for sm8350
   - dpu + dsi support for qcm2290
   - 10nm dsi phy tuning support
   - bridge support for dp encoder
   - gpu support for additional 7c3 SKUs

  ingenic:
   - HDMI support for JZ4780
   - aux channel EDID support

  ast:
   - AST2600 support
   - add wide screen support
   - create DP/DVI connectors

  omapdrm:
   - fix implicit dma_buf fencing

  vc4:
   - add CSC + full range support
   - better display firmware handoff

  panfrost:
   - add initial dual-core GPU support

  stm:
   - new revision support
   - fb handover support

  mediatek:
   - transfer display binding document to yaml format.
   - add mt8195 display device binding.
   - allow commands to be sent during video mode.
   - add wait_for_event for crtc disable by cmdq.

  tegra:
   - YUV format support

  rcar-du:
   - LVDS support for M3-W+ (R8A77961)

  exynos:
   - BGR pixel format for FIMD device"

* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
  drm/i915/display: Do not re-enable PSR after it was marked as not reliable
  drm/i915/display: Fix HPD short pulse handling for eDP
  drm/amdgpu: Use drm_mode_copy()
  drm/radeon: Use drm_mode_copy()
  drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
  drm/amdgpu: Remove pointless on stack mode copies
  drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
  drm/amdgpu/dc: fix typos in comments
  drm/amdgpu: fix typos in comments
  drm/amd/pm: fix typos in comments
  drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
  drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
  drm/amdkfd: evict svm bo worker handle error
  drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
  drm/amdgpu: only allow secure submission on rings which support that
  drm/amdgpu: fixed the warnings reported by kernel test robot
  drm/amd/display: 3.2.177
  drm/amd/display: [FW Promotion] Release 0.0.108.0
  drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
  drm/amd/display: Wait for hubp read line for Pollock
  ...

Merge more updates from Andrew Morton:
 "Various misc subsystems, before getting into the post-linux-next
  material.

  41 patches.

  Subsystems affected by this patch series: procfs, misc, core-kernel,
  lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump,
  taskstats, panic, kcov, resource, and ubsan"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits)
  Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang"
  kernel/resource: fix kfree() of bootmem memory again
  kcov: properly handle subsequent mmap calls
  kcov: split ioctl handling into locked and unlocked parts
  panic: move panic_print before kmsg dumpers
  panic: add option to dump all CPUs backtraces in panic_print
  docs: sysctl/kernel: add missing bit to panic_print
  taskstats: remove unneeded dead assignment
  kasan: no need to unset panic_on_warn in end_report()
  ubsan: no need to unset panic_on_warn in ubsan_epilogue()
  panic: unset panic_on_warn inside panic()
  docs: kdump: add scp example to write out the dump file
  docs: kdump: update description about sysfs file system support
  arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
  x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
  riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
  kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible
  cgroup: use irqsave in cgroup_rstat_flush_locked().
  fat: use pointer to simple type in put_user()
  minix: fix bug when opening a file with O_DIRECT
  ...

Pull networking updates from Jakub Kicinski:
 "The sprinkling of SPI drivers is because we added a new one and Mark
  sent us a SPI driver interface conversion pull request.

  Core
  ----

   - Introduce XDP multi-buffer support, allowing the use of XDP with
     jumbo frame MTUs and combination with Rx coalescing offloads (LRO).

   - Speed up netns dismantling (5x) and lower the memory cost a little.
     Remove unnecessary per-netns sockets. Scope some lists to a netns.
     Cut down RCU syncing. Use batch methods. Allow netdev registration
     to complete out of order.

   - Support distinguishing timestamp types (ingress vs egress) and
     maintaining them across packet scrubbing points (e.g. redirect).

   - Continue the work of annotating packet drop reasons throughout the
     stack.

   - Switch netdev error counters from an atomic to dynamically
     allocated per-CPU counters.

   - Rework a few preempt_disable(), local_irq_save() and busy waiting
     sections problematic on PREEMPT_RT.

   - Extend the ref_tracker to allow catching use-after-free bugs.

  BPF
  ---

   - Introduce "packing allocator" for BPF JIT images. JITed code is
     marked read only, and used to be allocated at page granularity.
     Custom allocator allows for more efficient memory use, lower iTLB
     pressure and prevents identity mapping huge pages from getting
     split.

   - Make use of BTF type annotations (e.g. __user, __percpu) to enforce
     the correct probe read access method, add appropriate helpers.

   - Convert the BPF preload to use light skeleton and drop the
     user-mode-driver dependency.

   - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
     its use as a packet generator.

   - Allow local storage memory to be allocated with GFP_KERNEL if
     called from a hook allowed to sleep.

   - Introduce fprobe (multi kprobe) to speed up mass attachment (arch
     bits to come later).

   - Add unstable conntrack lookup helpers for BPF by using the BPF
     kfunc infra.

   - Allow cgroup BPF progs to return custom errors to user space.

   - Add support for AF_UNIX iterator batching.

   - Allow iterator programs to use sleepable helpers.

   - Support JIT of add, and, or, xor and xchg atomic ops on arm64.

   - Add BTFGen support to bpftool which allows to use CO-RE in kernels
     without BTF info.

   - Large number of libbpf API improvements, cleanups and deprecations.

  Protocols
  ---------

   - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.

   - Adjust TSO packet sizes based on min_rtt, allowing very low latency
     links (data centers) to always send full-sized TSO super-frames.

   - Make IPv6 flow label changes (AKA hash rethink) more configurable,
     via sysctl and setsockopt. Distinguish between server and client
     behavior.

   - VxLAN support to "collect metadata" devices to terminate only
     configured VNIs. This is similar to VLAN filtering in the bridge.

   - Support inserting IPv6 IOAM information to a fraction of frames.

   - Add protocol attribute to IP addresses to allow identifying where
     given address comes from (kernel-generated, DHCP etc.)

   - Support setting socket and IPv6 options via cmsg on ping6 sockets.

   - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
     Define dscp_t and stop taking ECN bits into account in fib-rules.

   - Add support for locked bridge ports (for 802.1X).

   - tun: support NAPI for packets received from batched XDP buffs,
     doubling the performance in some scenarios.

   - IPv6 extension header handling in Open vSwitch.

   - Support IPv6 control message load balancing in bonding, prevent
     neighbor solicitation and advertisement from using the wrong port.
     Support NS/NA monitor selection similar to existing ARP monitor.

   - SMC
      - improve performance with TCP_CORK and sendfile()
      - support auto-corking
      - support TCP_NODELAY

   - MCTP (Management Component Transport Protocol)
      - add user space tag control interface
      - I2C binding driver (as specified by DMTF DSP0237)

   - Multi-BSSID beacon handling in AP mode for WiFi.

   - Bluetooth:
      - handle MSFT Monitor Device Event
      - add MGMT Adv Monitor Device Found/Lost events

   - Multi-Path TCP:
      - add support for the SO_SNDTIMEO socket option
      - lots of selftest cleanups and improvements

   - Increase the max PDU size in CAN ISOTP to 64 kB.

  Driver API
  ----------

   - Add HW counters for SW netdevs, a mechanism for devices which
     offload packet forwarding to report packet statistics back to
     software interfaces such as tunnels.

   - Select the default NIC queue count as a fraction of number of
     physical CPU cores, instead of hard-coding to 8.

   - Expose devlink instance locks to drivers. Allow device layer of
     drivers to use that lock directly instead of creating their own
     which always runs into ordering issues in devlink callbacks.

   - Add header/data split indication to guide user space enabling of
     TCP zero-copy Rx.

   - Allow configuring completion queue event size.

   - Refactor page_pool to enable fragmenting after allocation.

   - Add allocation and page reuse statistics to page_pool.

   - Improve Multiple Spanning Trees support in the bridge to allow
     reuse of topologies across VLANs, saving HW resources in switches.

   - DSA (Distributed Switch Architecture):
      - replay and offload of host VLAN entries
      - offload of static and local FDB entries on LAG interfaces
      - FDB isolation and unicast filtering

  New hardware / drivers
  ----------------------

   - Ethernet:
      - LAN937x T1 PHYs
      - Davicom DM9051 SPI NIC driver
      - Realtek RTL8367S, RTL8367RB-VB switch and MDIO
      - Microchip ksz8563 switches
      - Netronome NFP3800 SmartNICs
      - Fungible SmartNICs
      - MediaTek MT8195 switches

   - WiFi:
      - mt76: MediaTek mt7916
      - mt76: MediaTek mt7921u USB adapters
      - brcmfmac: Broadcom BCM43454/6

   - Mobile:
      - iosm: Intel M.2 7360 WWAN card

  Drivers
  -------

   - Convert many drivers to the new phylink API built for split PCS
     designs but also simplifying other cases.

   - Intel Ethernet NICs:
      - add TTY for GNSS module for E810T device
      - improve AF_XDP performance
      - GTP-C and GTP-U filter offload
      - QinQ VLAN support

   - Mellanox Ethernet NICs (mlx5):
      - support xdp->data_meta
      - multi-buffer XDP
      - offload tc push_eth and pop_eth actions

   - Netronome Ethernet NICs (nfp):
      - flow-independent tc action hardware offload (police / meter)
      - AF_XDP

   - Other Ethernet NICs:
      - at803x: fiber and SFP support
      - xgmac: mdio: preamble suppression and custom MDC frequencies
      - r8169: enable ASPM L1.2 if system vendor flags it as safe
      - macb/gem: ZynqMP SGMII
      - hns3: add TX push mode
      - dpaa2-eth: software TSO
      - lan743x: multi-queue, mdio, SGMII, PTP
      - axienet: NAPI and GRO support

   - Mellanox Ethernet switches (mlxsw):
      - source and dest IP address rewrites
      - RJ45 ports

   - Marvell Ethernet switches (prestera):
      - basic routing offload
      - multi-chain TC ACL offload

   - NXP embedded Ethernet switches (ocelot & felix):
      - PTP over UDP with the ocelot-8021q DSA tagging protocol
      - basic QoS classification on Felix DSA switch using dcbnl
      - port mirroring for ocelot switches

   - Microchip high-speed industrial Ethernet (sparx5):
      - offloading of bridge port flooding flags
      - PTP Hardware Clock

   - Other embedded switches:
      - lan966x: PTP Hardward Clock
      - qca8k: mdio read/write operations via crafted Ethernet packets

   - Qualcomm 802.11ax WiFi (ath11k):
      - add LDPC FEC type and 802.11ax High Efficiency data in radiotap
      - enable RX PPDU stats in monitor co-exist mode

   - Intel WiFi (iwlwifi):
      - UHB TAS enablement via BIOS
      - band disablement via BIOS
      - channel switch offload
      - 32 Rx AMPDU sessions in newer devices

   - MediaTek WiFi (mt76):
      - background radar detection
      - thermal management improvements on mt7915
      - SAR support for more mt76 platforms
      - MBSSID and 6 GHz band on mt7915

   - RealTek WiFi:
      - rtw89: AP mode
      - rtw89: 160 MHz channels and 6 GHz band
      - rtw89: hardware scan

   - Bluetooth:
      - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)

   - Microchip CAN (mcp251xfd):
      - multiple RX-FIFOs and runtime configurable RX/TX rings
      - internal PLL, runtime PM handling simplification
      - improve chip detection and error handling after wakeup"

* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
  llc: fix netdevice reference leaks in llc_ui_bind()
  drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
  ice: don't allow to run ice_send_event_to_aux() in atomic ctx
  ice: fix 'scheduling while atomic' on aux critical err interrupt
  net/sched: fix incorrect vlan_push_eth dest field
  net: bridge: mst: Restrict info size queries to bridge ports
  net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
  drivers: net: xgene: Fix regression in CRC stripping
  net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
  net: dsa: fix missing host-filtered multicast addresses
  net/mlx5e: Fix build warning, detected write beyond size of field
  iwlwifi: mvm: Don't fail if PPAG isn't supported
  selftests/bpf: Fix kprobe_multi test.
  Revert "rethook: x86: Add rethook x86 implementation"
  Revert "arm64: rethook: Add arm64 rethook implementation"
  Revert "powerpc: Add rethook support"
  Revert "ARM: rethook: Add rethook arm implementation"
  netdevice: add missing dm_private kdoc
  net: bridge: mst: prevent NULL deref in br_mst_info_size()
  selftests: forwarding: Use same VRF for port and VLAN upper
  ...

Pull VFIO updates from Alex Williamson:

 - Introduce new device migration uAPI and implement device specific
   mlx5 vfio-pci variant driver supporting new protocol (Jason
   Gunthorpe, Yishai Hadas, Leon Romanovsky)

 - New HiSilicon acc vfio-pci variant driver, also supporting migration
   interface (Shameer Kolothum, Longfang Liu)

 - D3hot fixes for vfio-pci-core (Abhishek Sahu)

 - Document new vfio-pci variant driver acceptance criteria
   (Alex Williamson)

 - Fix UML build unresolved ioport_{un}map() functions
   (Alex Williamson)

 - Fix MAINTAINERS due to header movement (Lukas Bulwahn)

* tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio: (31 commits)
  vfio-pci: Provide reviewers and acceptance criteria for variant drivers
  MAINTAINERS: adjust entry for header movement in hisilicon qm driver
  hisi_acc_vfio_pci: Use its own PCI reset_done error handler
  hisi_acc_vfio_pci: Add support for VFIO live migration
  crypto: hisilicon/qm: Set the VF QM state register
  hisi_acc_vfio_pci: Add helper to retrieve the struct pci_driver
  hisi_acc_vfio_pci: Restrict access to VF dev BAR2 migration region
  hisi_acc_vfio_pci: add new vfio_pci driver for HiSilicon ACC devices
  hisi_acc_qm: Move VF PCI device IDs to common header
  crypto: hisilicon/qm: Move few definitions to common header
  crypto: hisilicon/qm: Move the QM header to include/linux
  vfio/mlx5: Fix to not use 0 as NULL pointer
  PCI/IOV: Fix wrong kernel-doc identifier
  vfio/mlx5: Use its own PCI reset_done error handler
  vfio/pci: Expose vfio_pci_core_aer_err_detected()
  vfio/mlx5: Implement vfio_pci driver for mlx5 devices
  vfio/mlx5: Expose migration commands over mlx5 device
  vfio: Remove migration protocol v1 documentation
  vfio: Extend the device migration protocol with RUNNING_P2P
  vfio: Define device migration protocol v2
  ...

Merge tag 'hyperv-next-signed-20220322' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv updates from Wei Liu:
 "Minor patches from various people"

* tag 'hyperv-next-signed-20220322' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Output host build info as normal Windows version number
  hv_balloon: rate-limit "Unhandled message" warning
  drivers: hv: log when enabling crash_kexec_post_notifiers
  hv_utils: Add comment about max VMbus packet size in VSS driver
  Drivers: hv: Compare cpumasks and not their weights in init_vp_index()
  Drivers: hv: Rename 'alloced' to 'allocated'
  Drivers: hv: vmbus: Use struct_size() helper in kmalloc()

Pull kvm updates from Paolo Bonzini:
 "ARM:
   - Proper emulation of the OSLock feature of the debug architecture

   - Scalibility improvements for the MMU lock when dirty logging is on

   - New VMID allocator, which will eventually help with SVA in VMs

   - Better support for PMUs in heterogenous systems

   - PSCI 1.1 support, enabling support for SYSTEM_RESET2

   - Implement CONFIG_DEBUG_LIST at EL2

   - Make CONFIG_ARM64_ERRATUM_2077057 default y

   - Reduce the overhead of VM exit when no interrupt is pending

   - Remove traces of 32bit ARM host support from the documentation

   - Updated vgic selftests

   - Various cleanups, doc updates and spelling fixes

  RISC-V:
   - Prevent KVM_COMPAT from being selected

   - Optimize __kvm_riscv_switch_to() implementation

   - RISC-V SBI v0.3 support

  s390:
   - memop selftest

   - fix SCK locking

   - adapter interruptions virtualization for secure guests

   - add Claudio Imbrenda as maintainer

   - first step to do proper storage key checking

  x86:
   - Continue switching kvm_x86_ops to static_call(); introduce
     static_call_cond() and __static_call_ret0 when applicable.

   - Cleanup unused arguments in several functions

   - Synthesize AMD 0x80000021 leaf

   - Fixes and optimization for Hyper-V sparse-bank hypercalls

   - Implement Hyper-V's enlightened MSR bitmap for nested SVM

   - Remove MMU auditing

   - Eager splitting of page tables (new aka "TDP" MMU only) when dirty
     page tracking is enabled

   - Cleanup the implementation of the guest PGD cache

   - Preparation for the implementation of Intel IPI virtualization

   - Fix some segment descriptor checks in the emulator

   - Allow AMD AVIC support on systems with physical APIC ID above 255

   - Better API to disable virtualization quirks

   - Fixes and optimizations for the zapping of page tables:

      - Zap roots in two passes, avoiding RCU read-side critical
        sections that last too long for very large guests backed by 4
        KiB SPTEs.

      - Zap invalid and defunct roots asynchronously via
        concurrency-managed work queue.

      - Allowing yielding when zapping TDP MMU roots in response to the
        root's last reference being put.

      - Batch more TLB flushes with an RCU trick. Whoever frees the
        paging structure now holds RCU as a proxy for all vCPUs running
        in the guest, i.e. to prolongs the grace period on their behalf.
        It then kicks the the vCPUs out of guest mode before doing
        rcu_read_unlock().

  Generic:
   - Introduce __vcalloc and use it for very large allocations that need
     memcg accounting"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
  KVM: use kvcalloc for array allocations
  KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2
  kvm: x86: Require const tsc for RT
  KVM: x86: synthesize CPUID leaf 0x80000021h if useful
  KVM: x86: add support for CPUID leaf 0x80000021
  KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask
  Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()"
  kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU
  KVM: arm64: fix typos in comments
  KVM: arm64: Generalise VM features into a set of flags
  KVM: s390: selftests: Add error memop tests
  KVM: s390: selftests: Add more copy memop tests
  KVM: s390: selftests: Add named stages for memop test
  KVM: s390: selftests: Add macro as abstraction for MEM_OP
  KVM: s390: selftests: Split memop tests
  KVM: s390x: fix SCK locking
  RISC-V: KVM: Implement SBI HSM suspend call
  RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function
  RISC-V: Add SBI HSM suspend related defines
  RISC-V: KVM: Implement SBI v0.3 SRST extension
  ...

Pull tomoyo update from Tetsuo Handa:
 "Avoid unnecessarily leaking kernel command line arguments"

* tag 'tomoyo-pr-20220322' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
  TOMOYO: fix __setup handlers return values

Merge tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull flexible-array transformations from Gustavo Silva:
 "Treewide patch that replaces zero-length arrays with flexible-array
  members.

  This has been baking in linux-next for a whole development cycle"

* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  treewide: Replace zero-length arrays with flexible-array members

Merge tag 'prlimit-tasklist_lock-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull tasklist_lock optimizations from Eric Biederman:
 "prlimit and getpriority tasklist_lock optimizations

  The tasklist_lock popped up as a scalability bottleneck on some
  testing workloads. The readlocks in do_prlimit and set/getpriority are
  not necessary in all cases.

  Based on a cycles profile, it looked like ~87% of the time was spent
  in the kernel, ~42% of which was just trying to get *some* spinlock
  (queued_spin_lock_slowpath, not necessarily the tasklist_lock).

  The big offenders (with rough percentages in cycles of the overall
  trace):
   - do_wait 11%
   - setpriority 8% (done previously in commit 7f8ca0ed)
   - kill 8%
   - do_exit 5%
   - clone 3%
   - prlimit64 2%   (this patchset)
   - getrlimit 1%   (this patchset)

  I can't easily test this patchset on the original workload for various
  reasons. Instead, I used the microbenchmark below to at least verify
  there was some improvement. This patchset had a 28% speedup (12% from
  baseline to set/getprio, then another 14% for prlimit).

  This series used to do the setpriority case, but an almost identical
  change was merged as commit 7f8ca0ed ("kernel/sys.c: only take
  tasklist_lock for get/setpriority(PRIO_PGRP)") so that has been
  dropped from here.

  One interesting thing is that my libc's getrlimit() was calling
  prlimit64, so hoisting the read_lock(tasklist_lock) into sys_prlimit64
  had no effect - it essentially optimized the older syscalls only. I
  didn't do that in this patchset, but figured I'd mention it since it
  was an option from the previous patch's discussion"

micobenchmark.c:
---------------
	int main(int argc, char **argv)
	{
		pid_t child;
		struct rlimit rlim[1];

		fork(); fork(); fork(); fork(); fork(); fork();

		for (int i = 0; i < 5000; i++) {
			child = fork();
			if (child < 0)
				exit(1);
			if (child > 0) {
				usleep(1000);
				kill(child, SIGTERM);
				waitpid(child, NULL, 0);
			} else {
				for (;;) {
					setpriority(PRIO_PROCESS, 0,
						    getpriority(PRIO_PROCESS, 0));
					getrlimit(RLIMIT_CPU, rlim);
				}
			}
		}

		return 0;
	}

Link: https://lore.kernel.org/lkml/20211213220401.1039578-1-brho@google.com/ [v1]
Link: https://lore.kernel.org/lkml/20220105212828.197013-1-brho@google.com/ [v2]
Link: https://lore.kernel.org/lkml/20220106172041.522167-1-brho@google.com/ [v3]

* tag 'prlimit-tasklist_lock-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  prlimit: do not grab the tasklist_lock
  prlimit: make do_prlimit() static

Pull mount attributes PREEMPT_RT update from Christian Brauner:
 "This contains Sebastian's fix to make changing mount
  attributes/getting write access compatible with CONFIG_PREEMPT_RT.

  The change only applies when users explicitly opt-in to real-time via
  CONFIG_PREEMPT_RT otherwise things are exactly as before. We've waited
  quite a long time with this to make sure folks could take a good look"

* tag 'fs.rt.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fs/namespace: Boost the mount_lock.lock owner instead of spinning on PREEMPT_RT.

Pull mount_setattr updates from Christian Brauner:
 "This contains a few more patches to massage the mount_setattr()
  codepaths and one minor fix to reuse a helper we added some time back.

  The final two patches do similar cleanups in different ways. One patch
  is mine and the other is Al's who was nice enough to give me a branch
  for it.

  Since his came in later and my branch had been sitting in -next for
  quite some time we just put his on top instead of swap them"

* tag 'fs.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  mount_setattr(): clean the control flow and calling conventions
  fs: clean up mount_setattr control flow
  fs: don't open-code mnt_hold_writers()
  fs: simplify check in mount_setattr_commit()
  fs: add mnt_allow_writers() and simplify mount_setattr_prepare()

Select HAVE_ARCH_NODEDATA_EXTENSION for loongson64 to fix build error
when CONFIG_NUMA=y:

mips64el-unknown-linux-gnu-ld: mm/page_alloc.o: in function `free_area_init':
(.init.text+0x1714): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: (.init.text+0x1730): undefined reference to `node_data'

Also, select HAVE_ARCH_NODEDATA_EXTENSION for sgi-ip27 to fix build error:

mips64el-unknown-linux-gnu-ld: mm/page_alloc.o: in function `free_area_init':
page_alloc.c:(.init.text+0x1ba8): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1bcc): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1be4): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1bf4): undefined reference to `node_data'
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This reverts commit ea91a1d4.

Since df05c0e9 ("Documentation: Raise the minimum supported version
of LLVM to 11.0.0") the minimum Clang version is now 11.0, which fixed
the UBSAN/KCSAN vs. KCOV incompatibilities.

Link: https://bugs.llvm.org/show_bug.cgi?id=45831
Link: https://lkml.kernel.org/r/YaodyZzu0MTCJcvO@elver.google.com
Link: https://lkml.kernel.org/r/20220128105631.509772-1-elver@google.comSigned-off-by: Marco Elver <elver@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit ebff7d8f ("mem hotunplug: fix kfree() of bootmem
memory"), we could get a resource allocated during boot via
alloc_resource().  And it's required to release the resource using
free_resource().  Howerver, many people use kfree directly which will
result in kernel BUG.  In order to fix this without fixing every call
site, just leak a couple of bytes in such corner case.

Link: https://lkml.kernel.org/r/20220217083619.19305-1-linmiaohe@huawei.com
Fixes: ebff7d8f ("mem hotunplug: fix kfree() of bootmem memory")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allocate the kcov buffer during KCOV_MODE_INIT in order to untie mmapping
of a kcov instance and the actual coverage collection process. Modify
kcov_mmap, so that it can be reliably used any number of times once
KCOV_MODE_INIT has succeeded.

These changes to the user-facing interface of the tool only weaken the
preconditions, so all existing user space code should remain compatible
with the new version.

Link: https://lkml.kernel.org/r/20220117153634.150357-3-nogikh@google.comSigned-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Taras Madan <tarasmadan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "kcov: improve mmap processing", v3.

Subsequent mmaps of the same kcov descriptor currently do not update the
virtual memory of the task and yet return 0 (success).  This is
counter-intuitive and may lead to unexpected memory access errors.

Also, this unnecessarily limits the functionality of kcov to only the
simplest usage scenarios.  Kcov instances are effectively forever attached
to their first address spaces and it becomes impossible to e.g.  reuse the
same kcov handle in forked child processes without mmapping the memory
first.  This is exactly what we tried to do in syzkaller and inadvertently
came upon this behavior.

This patch series addresses the problem described above.

This patch (of 3):

Currently all ioctls are de facto processed under a spinlock in order to
serialise them.  This, however, prohibits the use of vmalloc and other
memory management functions in the implementations of those ioctls,
unnecessary complicating any further changes to the code.

Let all ioctls first be processed inside the kcov_ioctl() function which
should execute the ones that are not compatible with spinlock and then
pass control to kcov_ioctl_locked() for all other ones.
KCOV_REMOTE_ENABLE is processed both in kcov_ioctl() and
kcov_ioctl_locked() as the steps are easily separable.

Although it is still compatible with a spinlock, move KCOV_INIT_TRACE
handling to kcov_ioctl(), so that the changes from the next commit are
easier to follow.

Link: https://lkml.kernel.org/r/20220117153634.150357-1-nogikh@google.com
Link: https://lkml.kernel.org/r/20220117153634.150357-2-nogikh@google.comSigned-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Taras Madan <tarasmadan@google.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The panic_print setting allows users to collect more information in a
panic event, like memory stats, tasks, CPUs backtraces, etc.  This is an
interesting debug mechanism, but currently the print event happens *after*
kmsg_dump(), meaning that pstore, for example, cannot collect a dmesg with
the panic_print extra information.

This patch changes that in 2 steps:

(a) The panic_print setting allows to replay the existing kernel log
    buffer to the console (bit 5), besides the extra information dump.
    This functionality makes sense only at the end of the panic()
    function.  So, we hereby allow to distinguish the two situations by a
    new boolean parameter in the function panic_print_sys_info().

(b) With the above change, we can safely call panic_print_sys_info()
    before kmsg_dump(), allowing to dump the extra information when using
    pstore or other kmsg dumpers.

The additional messages from panic_print could overwrite the oldest
messages when the buffer is full.  The only reasonable solution is to use
a large enough log buffer, hence we added an advice into the kernel
parameters documentation about that.

Link: https://lkml.kernel.org/r/20220214141308.841525-1-gpiccoli@igalia.comSigned-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently the "panic_print" parameter/sysctl allows some interesting debug
information to be printed during a panic event.  This is useful for
example in cases the user cannot kdump due to resource limits, or if the
user collects panic logs in a serial output (or pstore) and prefers a fast
reboot instead of a kdump.

Happens that currently there's no way to see all CPUs backtraces in a
panic using "panic_print" on architectures that support that.  We do have
"oops_all_cpu_backtrace" sysctl, but although partially overlapping in the
functionality, they are orthogonal in nature: "panic_print" is a panic
tuning (and we have panics without oopses, like direct calls to panic() or
maybe other paths that don't go through oops_enter() function), and the
original purpose of "oops_all_cpu_backtrace" is to provide more
information on oopses for cases in which the users desire to continue
running the kernel even after an oops, i.e., used in non-panic scenarios.

So, we hereby introduce an additional bit for "panic_print" to allow
dumping the CPUs backtraces during a panic event.

Link: https://lkml.kernel.org/r/20211109202848.610874-3-gpiccoli@igalia.comSigned-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "Some improvements on panic_print".

This is a mix of a documentation fix with some additions to the
"panic_print" syscall / parameter.  The goal here is being able to collect
all CPUs backtraces during a panic event and also to enable "panic_print"
in a kdump event - details of the reasoning and design choices in the
patches.

This patch (of 3):

Commit de6da1e8 ("panic: add an option to replay all the printk
message in buffer") added a new bit to the sysctl/kernel parameter
"panic_print", but the documentation was added only in
kernel-parameters.txt, not in the sysctl guide.

Fix it here by adding bit 5 to sysctl admin-guide documentation.

[rdunlap@infradead.org: fix table format warning]
  Link: https://lkml.kernel.org/r/20220109055635.6999-1-rdunlap@infradead.org

Link: https://lkml.kernel.org/r/20211109202848.610874-1-gpiccoli@igalia.com
Link: https://lkml.kernel.org/r/20211109202848.610874-2-gpiccoli@igalia.com
Fixes: de6da1e8 ("panic: add an option to replay all the printk message in buffer")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

make clang-analyzer on x86_64 defconfig caught my attention with:

  kernel/taskstats.c:120:2: warning: Value stored to 'rc' is never read \
  [clang-analyzer-deadcode.DeadStores]
          rc = 0;
          ^

Commit d94a0415 ("taskstats: free skb, avoid returns in
send_cpu_listeners") made send_cpu_listeners() not return a value and
hence, the rc variable remained only to be used within the loop where
it is always assigned before read and it does not need any other
initialisation.

So, simply remove this unneeded dead initializing assignment.

As compilers will detect this unneeded assignment and optimize this anyway,
the resulting object code is identical before and after this change.

No functional change. No change to object code.

[akpm@linux-foundation.org: reduce scope of `rc']

Link: https://lkml.kernel.org/r/20220307093942.21310-1-lukas.bulwahn@gmail.comSigned-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

panic_on_warn is unset inside panic(), so no need to unset it before
calling panic() in end_report().

Link: https://lkml.kernel.org/r/1644324666-15947-6-git-send-email-yangtiezhu@loongson.cnSigned-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

panic_on_warn is unset inside panic(), so no need to unset it before
calling panic() in ubsan_epilogue().

Link: https://lkml.kernel.org/r/1644324666-15947-5-git-send-email-yangtiezhu@loongson.cnSigned-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In the current code, the following three places need to unset
panic_on_warn before calling panic() to avoid recursive panics:

kernel/kcsan/report.c: print_report()
kernel/sched/core.c: __schedule_bug()
mm/kfence/report.c: kfence_report_error()

In order to avoid copy-pasting "panic_on_warn = 0" all over the places,
it is better to move it inside panic() and then remove it from the other
places.

Link: https://lkml.kernel.org/r/1644324666-15947-4-git-send-email-yangtiezhu@loongson.cnSigned-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Except cp and makedumpfile, add scp example to write out the dump file.

Link: https://lkml.kernel.org/r/1644324666-15947-3-git-send-email-yangtiezhu@loongson.cnSigned-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marco Elver <elver@google.com>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "Update doc and fix some issues about kdump", v2.

This patch (of 5):

After commit 6a108a14 ("kconfig: rename CONFIG_EMBEDDED to
CONFIG_EXPERT"), "Configure standard kernel features (for small
systems)" is not exist, we should use "Configure standard kernel
features (expert users)" now.

Link: https://lkml.kernel.org/r/1644324666-15947-1-git-send-email-yangtiezhu@loongson.cn
Link: https://lkml.kernel.org/r/1644324666-15947-2-git-send-email-yangtiezhu@loongson.cnSigned-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by a
check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and
increase compile coverage.

Link: https://lkml.kernel.org/r/20211206160514.2000-5-jszhang@kernel.orgSigned-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by a
check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and
increase compile coverage.

Link: https://lkml.kernel.org/r/20211206160514.2000-4-jszhang@kernel.orgSigned-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by a
check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and
increase compile coverage.

Link: https://lkml.kernel.org/r/20211206160514.2000-3-jszhang@kernel.orgSigned-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>