- 01 Feb, 2019 31 commits
-
-
Ard Biesheuvel authored
The SIMD routine ported from x86 used to have a special code path for inputs < 16 bytes, which got lost somewhere along the way. Instead, the current glue code aligns the input pointer to 16 bytes, which is not really necessary on this architecture (although it could be beneficial to performance to expose aligned data to the the NEON routine), but this could result in inputs of less than 16 bytes to be passed in. This not only fails the new extended tests that Eric has implemented, it also results in the code reading past the end of the input, which could potentially result in crashes when dealing with less than 16 bytes of input at the end of a page which is followed by an unmapped page. So update the glue code to only invoke the NEON routine if the input is at least 16 bytes. Reported-by:
Eric Biggers <ebiggers@kernel.org> Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
The SIMD routine ported from x86 used to have a special code path for inputs < 16 bytes, which got lost somewhere along the way. Instead, the current glue code aligns the input pointer to permit the NEON routine to use special versions of the vld1 instructions that assume 16 byte alignment, but this could result in inputs of less than 16 bytes to be passed in. This not only fails the new extended tests that Eric has implemented, it also results in the code reading past the end of the input, which could potentially result in crashes when dealing with less than 16 bytes of input at the end of a page which is followed by an unmapped page. So update the glue code to only invoke the NEON routine if the input is at least 16 bytes. Reported-by:
-
Horia Geantă authored
Roland reports the following issue and provides a root cause analysis: "On a v4.19 i.MX6 system with IMA and CONFIG_DMA_API_DEBUG enabled, a warning is generated when accessing files on a filesystem for which IMA measurement is enabled: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:1181 check_for_stack.part.9+0xd0/0x120 caam_jr 2101000.jr0: DMA-API: device driver maps memory from stack [addr=b668049e] Modules linked in: CPU: 0 PID: 1 Comm: switch_root Not tainted 4.19.0-20181214-1 #2 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c010efb8>] (dump_backtrace) from [<c010f2d0>] (show_stack+0x20/0x24) [<c010f2b0>] (show_stack) from [<c08b04f4>] (dump_stack+0xa0/0xcc) [<c08b0454>] (dump_stack) from [<c012b610>] (__warn+0xf0/0x108) [<c012b520>] (__warn) from [<c012b680>] (warn_slowpath_fmt+0x58/0x74) [<c012b62c>] (warn_slowpath_fmt) from [<c0199acc>] (check_for_stack.part.9+0xd0/0x120) [<c01999fc>] (check_for_stack.part.9) from [<c019a040>] (debug_dma_map_page+0x144/0x174) [<c0199efc>] (debug_dma_map_page) from [<c065f7f4>] (ahash_final_ctx+0x5b4/0xcf0) [<c065f240>] (ahash_final_ctx) from [<c065b3c4>] (ahash_final+0x1c/0x20) [<c065b3a8>] (ahash_final) from [<c03fe278>] (crypto_ahash_op+0x38/0x80) [<c03fe240>] (crypto_ahash_op) from [<c03fe2e0>] (crypto_ahash_final+0x20/0x24) [<c03fe2c0>] (crypto_ahash_final) from [<c03f19a8>] (ima_calc_file_hash+0x29c/0xa40) [<c03f170c>] (ima_calc_file_hash) from [<c03f2b24>] (ima_collect_measurement+0x1dc/0x240) [<c03f2948>] (ima_collect_measurement) from [<c03f0a60>] (process_measurement+0x4c4/0x6b8) [<c03f059c>] (process_measurement) from [<c03f0cdc>] (ima_file_check+0x88/0xa4) [<c03f0c54>] (ima_file_check) from [<c02d8adc>] (path_openat+0x5d8/0x1364) [<c02d8504>] (path_openat) from [<c02dad24>] (do_filp_open+0x84/0xf0) [<c02daca0>] (do_filp_open) from [<c02cf50c>] (do_open_execat+0x84/0x1b0) [<c02cf488>] (do_open_execat) from [<c02d1058>] (__do_execve_file+0x43c/0x890) [<c02d0c1c>] (__do_execve_file) from [<c02d1770>] (sys_execve+0x44/0x4c) [<c02d172c>] (sys_execve) from [<c0101000>] (ret_fast_syscall+0x0/0x28) ---[ end trace 3455789a10e3aefd ]--- The cause is that the struct ahash_request *req is created as a stack-local variable up in the stack (presumably somewhere in the IMA implementation), then passed down into the CAAM driver, which tries to dma_single_map the req->result (indirectly via map_seq_out_ptr_result) in order to make that buffer available for the CAAM to store the result of the following hash operation. The calling code doesn't know how req will be used by the CAAM driver, and there could be other such occurrences where stack memory is passed down to the CAAM driver. Therefore we should rather fix this issue in the CAAM driver where the requirements are known." Fix this problem by: -instructing the crypto engine to write the final hash in state->caam_ctx -subsequently memcpy-ing the final hash into req->result Cc: <stable@vger.kernel.org> # v4.19+ Reported-by:Roland Hieber <rhi@pengutronix.de> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Tested-by:
-
Ard Biesheuvel authored
The arm64 GHASH implementation either uses 8-bit or 64-bit polynomial multiplication instructions, since the latter are faster but not mandatory in the architecture. Since that prevents us from testing both implementations on the same system, let's expose both implementations to the crypto API, with the priorities reflecting that the P64 version is the preferred one if available. Signed-off-by:
-
Milan Broz authored
The CRC32 is not a cryptographic hash algorithm, so the FIPS restrictions should not apply to it. (The CRC32C variant is already allowed.) This CRC32 variant is used for in dm-crypt legacy TrueCrypt IV implementation (tcw); detected by cryptsetup test suite failure in FIPS mode. Signed-off-by:
Milan Broz <gmazyland@gmail.com> Reviewed-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Masahiro Yamada authored
The header search path -I. in kernel Makefiles is very suspicious; it allows the compiler to search for headers in the top of $(srctree), where obviously no header file exists. 'git grep BCMDRIVER' has no hit. So, this macro is not referenced. I was able to build this driver without the extra compiler options. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Masahiro Yamada authored
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/Signed-off-by:
-
Ard Biesheuvel authored
When the AES-CCM code was first added, the NEON register were saved and restored eagerly, and so the code avoided doing so, and executed the scatterwalk in atomic context inside the kernel_neon_begin/end section. This has been changed in the meantime, so switch to non-atomic scatterwalks. Fixes: bd2ad885 ("crypto: arm64/aes-ce-ccm - move kernel mode neon ...") Signed-off-by:
-
Ard Biesheuvel authored
Commit 5092fcf3 ("crypto: arm64/aes-ce-ccm: add non-SIMD generic fallback") introduced C fallback code to replace the NEON routines when invoked from a context where the NEON is not available (i.e., from the context of a softirq taken while the NEON is already being used in kernel process context) Fix two logical flaws in the MAC calculation of the associated data. Reported-by:
-
Ard Biesheuvel authored
The NEON MAC calculation routine fails to handle the case correctly where there is some data in the buffer, and the input fills it up exactly. In this case, we enter the loop at the end with w8 == 0, while a negative value is assumed, and so the loop carries on until the increment of the 32-bit counter wraps around, which is quite obviously wrong. So omit the loop altogether in this case, and exit right away. Reported-by:
-
Eric Biggers authored
Instantiating "cryptd(crc32c)" causes a crypto self-test failure because the crypto_alloc_shash() in alg_test_crc32c() fails. This is because cryptd(crc32c) is an ahash algorithm, not a shash algorithm; so it can only be accessed through the ahash API, unlike shash algorithms which can be accessed through both the ahash and shash APIs. As the test is testing the shash descriptor format which is only applicable to shash algorithms, skip it for ahash algorithms. (Note that it's still important to fix crypto self-test failures even for weird algorithm instantiations like cryptd(crc32c) that no one would really use; in fips_enabled mode unprivileged users can use them to panic the kernel, and also they prevent treating a crypto self-test failure as a bug when fuzzing the kernel.) Fixes: 8e3ee85e ("crypto: crc32c - Test descriptor context format") Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Vincent Whitchurch authored
The request unmap and bounce buffer copying is currently unnecessarily done while holding the queue spin lock. Signed-off-by:
Lars Persson <larper@axis.com> Signed-off-by:
Vincent Whitchurch <rabinv@axis.com> Signed-off-by:
-
Lars Persson authored
Avoid plain memcmp() on the AEAD tag value as this could leak information through a timing side channel. Signed-off-by:
-
Lars Persson authored
The implementation assumed that the client always wants the whole 16 byte AES-GCM tag. Now we respect the requested authentication tag size fetched using crypto_aead_authsize(). Signed-off-by:
-
Lars Persson authored
The driver was optimized to only do cache maintenance for the last word of the dma descriptor status array. Unfortunately an omission also passed the last word as the address of the array start to the DMA engine. In most cases this goes unnoticed since the hardware aligns the address to a 64 byte boundary. Signed-off-by:
-
Lars Persson authored
Clients may submit a new requests from the completion callback context. The driver was not prepared to receive a request in this state because it already held the request queue lock and a recursive lock error is triggered. Now all completions are queued up until we are ready to drop the queue lock and then delivered. The fault was triggered by TCP over an IPsec connection in the LTP test suite: LTP: starting tcp4_ipsec02 (tcp_ipsec.sh -p ah -m transport -s "100 1000 65535") BUG: spinlock recursion on CPU#1, genload/943 lock: 0xbf3c3094, .magic: dead4ead, .owner: genload/943, .owner_cpu: 1 CPU: 1 PID: 943 Comm: genload Tainted: G O 4.9.62-axis5-devel #6 Hardware name: Axis ARTPEC-6 Platform (unwind_backtrace) from [<8010d134>] (show_stack+0x18/0x1c) (show_stack) from [<803a289c>] (dump_stack+0x84/0x98) (dump_stack) from [<8016e164>] (do_raw_spin_lock+0x124/0x128) (do_raw_spin_lock) from [<804de1a4>] (artpec6_crypto_submit+0x2c/0xa0) (artpec6_crypto_submit) from [<804def38>] (artpec6_crypto_prepare_submit_hash+0xd0/0x54c) (artpec6_crypto_prepare_submit_hash) from [<7f3165f0>] (ah_output+0x2a4/0x3dc [ah4]) (ah_output [ah4]) from [<805df9bc>] (xfrm_output_resume+0x178/0x4a4) (xfrm_output_resume) from [<805d283c>] (xfrm4_output+0xac/0xbc) (xfrm4_output) from [<80587928>] (ip_queue_xmit+0x140/0x3b4) (ip_queue_xmit) from [<805a13b4>] (tcp_transmit_skb+0x4c4/0x95c) (tcp_transmit_skb) from [<8059f218>] (tcp_rcv_state_process+0xdf4/0xdfc) (tcp_rcv_state_process) from [<805a7530>] (tcp_v4_do_rcv+0x64/0x1ac) (tcp_v4_do_rcv) from [<805a9724>] (tcp_v4_rcv+0xa34/0xb74) (tcp_v4_rcv) from [<80581d34>] (ip_local_deliver_finish+0x78/0x2b0) (ip_local_deliver_finish) from [<8058259c>] (ip_local_deliver+0xe4/0x104) (ip_local_deliver) from [<805d23ec>] (xfrm4_transport_finish+0xf4/0x144) (xfrm4_transport_finish) from [<805df564>] (xfrm_input+0x4f4/0x74c) (xfrm_input) from [<804de420>] (artpec6_crypto_task+0x208/0x38c) (artpec6_crypto_task) from [<801271b0>] (tasklet_action+0x60/0xec) (tasklet_action) from [<801266d4>] (__do_softirq+0xcc/0x3a4) (__do_softirq) from [<80126d20>] (irq_exit+0xf4/0x15c) (irq_exit) from [<801741e8>] (__handle_domain_irq+0x68/0xbc) (__handle_domain_irq) from [<801014f0>] (gic_handle_irq+0x50/0x94) (gic_handle_irq) from [<80657370>] (__irq_usr+0x50/0x80) Signed-off-by:
-
Lars Persson authored
The hardware cannot restore the context correctly when it operates in SHA512 mode. This is too restrictive when operating in a framework that can interleave multiple hash sessions. Signed-off-by:
-
Lars Persson authored
The hardware implementation of SHA384 was not correct and it cannot be used in any situation. Signed-off-by:
-
Corentin Labbe authored
When building without CONFIG_HW_RANDOM_PPC4XX, I hit the following build failure: drivers/crypto/amcc/crypto4xx_core.c: In function 'crypto4xx_probe': drivers/crypto/amcc/crypto4xx_core.c:1407:20: error: passing argument 1 of 'ppc4xx_trng_probe' from incompatible pointer type [-Werror=incompatible-pointer-types] In file included from drivers/crypto/amcc/crypto4xx_core.c:50:0: drivers/crypto/amcc/crypto4xx_trng.h:28:20: note: expected 'struct crypto4xx_device *' but argument is of type 'struct crypto4xx_core_device *' drivers/crypto/amcc/crypto4xx_core.c: In function 'crypto4xx_remove': drivers/crypto/amcc/crypto4xx_core.c:1434:21: error: passing argument 1 of 'ppc4xx_trng_remove' from incompatible pointer type [-Werror=incompatible-pointer-types] In file included from drivers/crypto/amcc/crypto4xx_core.c:50:0: drivers/crypto/amcc/crypto4xx_trng.h:30:20: note: expected 'struct crypto4xx_device *' but argument is of type 'struct crypto4xx_core_device *' This patch fix the needed argument of ppc4xx_trng_probe()/ppc4xx_trng_remove() in that case. Fixes: 5343e674 ("crypto4xx: integrate ppc4xx-rng into crypto4xx") Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
YueHaibing authored
Fix a static code checker warning: drivers/crypto/chelsio/chcr_algo.c:3681 chcr_aead_op() warn: passing zero to 'PTR_ERR' Fixes: 2debd332 ("crypto: chcr - Add AEAD algos.") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Roland Hieber authored
Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: "Horia Geantă" <horia.geanta@nxp.com> Cc: Aymen Sghaier <aymen.sghaier@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gary Hook <gary.hook@amd.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Srikanth Jampala <Jampala.Srikanth@cavium.com> Cc: Yangtao Li <tiny.windzz@gmail.com> Cc: Gadam Sreerama <sgadam@cavium.com> Cc: Eric Biggers <ebiggers@google.com> Cc: linux-crypto@vger.kernel.org Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Robert Richter <rrichter@cavium.com> Cc: Jan Glauber <jglauber@cavium.com> Cc: linux-crypto@vger.kernel.org Signed-off-by:
Jan Glauber <jglauber@cavium.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-arm-kernel@axis.com Cc: linux-crypto@vger.kernel.org Signed-off-by:
Lars Persson <lars.persson@axis.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Yael Chemla <yael.chemla@foss.arm.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Conor McLoughlin <conor.mcloughlin@intel.com> Cc: Waiman Long <longman@redhat.com> Cc: qat-linux@intel.com Cc: linux-crypto@vger.kernel.org Signed-off-by:
-
Horia Geantă authored
Recent AEAD changes in testmgr framework introduced by commit a0d608ee ("crypto: testmgr - unify the AEAD encryption and decryption test vectors") uncovered an error in the CAAM drivers, since they don't correctly handle the case when AEAD output length is zero. Add checks to avoid feeding zero-length req->dst to DMA API. Signed-off-by:
-
Iuliana Prodan authored
Add cmac(aes) keyed hash offloading support. Similar to xcbc implementation, driver must make sure there are still some bytes buffered when ahash_final() is called. This way HW is able to decide whether padding is needed and which key to derive (L -> K1 / K2) for the last block. Signed-off-by:
Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by:
-
YueHaibing authored
Use kmemdup rather than duplicating its implementation Signed-off-by:
-
- 25 Jan, 2019 9 commits
-
-
Eric Biggers authored
CRYPTO_TFM_REQ_WEAK_KEY confuses newcomers to the crypto API because it sounds like it is requesting a weak key. Actually, it is requesting that weak keys be forbidden (for algorithms that have the notion of "weak keys"; currently only DES and XTS do). Also it is only one letter away from CRYPTO_TFM_RES_WEAK_KEY, with which it can be easily confused. (This in fact happened in the UX500 driver, though just in some debugging messages.) Therefore, make the intent clear by renaming it to CRYPTO_TFM_REQ_FORBID_WEAK_KEYS. Signed-off-by:
-
Eric Biggers authored
The do_decrypt() function in util.c in the BCM crypto driver is never used, so remove it. Signed-off-by:
-
David Tolnay authored
The virtio-rng driver uses a completion called have_data to wait for a virtio read to be fulfilled by the hypervisor. The completion is reset before placing a buffer on the virtio queue and completed by the virtio callback once data has been written into the buffer. Prior to this commit, the driver called init_completion on this completion both during probe as well as when registering virtio buffers as part of a hwrng read operation. The second of these init_completion calls should instead be reinit_completion because the have_data completion has already been inited by probe. As described in Documentation/scheduler/completion.txt, "Calling init_completion() twice on the same completion object is most likely a bug". This bug was present in the initial implementation of virtio-rng in f7f510ec ("virtio: An entropy device, as suggested by hpa"). Back then the have_data completion was a single static completion rather than a member of one of potentially multiple virtrng_info structs as implemented later by 08e53fbd ("virtio-rng: support multiple virtio-rng devices"). The original driver incorrectly used init_completion rather than INIT_COMPLETION to reset have_data during read. Tested by running `head -c48 /dev/random | hexdump` within crosvm, the Chrome OS virtual machine monitor, and confirming that the virtio-rng driver successfully produces random bytes from the host. Signed-off-by:
David Tolnay <dtolnay@gmail.com> Tested-by:
-
Xiongfeng Wang authored
Use crypto template array registering API to simplify the code. Signed-off-by:
Xiongfeng Wang <xiongfeng.wang@linaro.org> Reviewed-by:
-
Xiongfeng Wang authored
Use crypto template array registering API to simplify the code. Signed-off-by:
-
Xiongfeng Wang authored
Use crypto template array registering API to simplify the code. Signed-off-by:
-
Xiongfeng Wang authored
Use crypto template array registering API to simplify the code. Signed-off-by:
-
Xiongfeng Wang authored
This patch add a helper to (un)register a array of templates. The following patches will use this helper to simplify the code. Signed-off-by:
-
Thomas Gleixner authored
The license boiler plate text is not ideal for machine parsing. The kernel uses SPDX license identifiers for that purpose, which replace the boiler plate text. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Ondrej Mosnacek <omosnacek@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Acked-by:
Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by:
-
