- 31 Mar, 2018 6 commits
-
-
Andrey Ignatov authored
== The problem == See description of the problem in the initial patch of this patch set. == The solution == The patch provides much more reliable in-kernel solution for the 2nd part of the problem: making outgoing connecttion from desired IP. It adds new attach types `BPF_CGROUP_INET4_CONNECT` and `BPF_CGROUP_INET6_CONNECT` for program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that can be used to override both source and destination of a connection at connect(2) time. Local end of connection can be bound to desired IP using newly introduced BPF-helper `bpf_bind()`. It allows to bind to only IP though, and doesn't support binding to port, i.e. leverages `IP_BIND_ADDRESS_NO_PORT` socket option. There are two reasons for this: * looking for a free port is expensive and can affect performance significantly; * there is no use-case for port. As for remote end (`struct sockaddr *` passed by user), both parts of it can be overridden, remote IP and remote port. It's useful if an application inside cgroup wants to connect to another application inside same cgroup or to itself, but knows nothing about IP assigned to the cgroup. Support is added for IPv4 and IPv6, for TCP and UDP. IPv4 and IPv6 have separate attach types for same reason as sys_bind hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound. == Implementation notes == The patch introduces new field in `struct proto`: `pre_connect` that is a pointer to a function with same signature as `connect` but is called before it. The reason is in some cases BPF hooks should be called way before control is passed to `sk->sk_prot->connect`. Specifically `inet_dgram_connect` autobinds socket before calling `sk->sk_prot->connect` and there is no way to call `bpf_bind()` from hooks from e.g. `ip4_datagram_connect` or `ip6_datagram_connect` since it'd cause double-bind. On the other hand `proto.pre_connect` provides a flexible way to add BPF hooks for connect only for necessary `proto` and call them at desired time before `connect`. Since `bpf_bind()` is allowed to bind only to IP and autobind in `inet_dgram_connect` binds only port there is no chance of double-bind. bpf_bind() sets `force_bind_address_no_port` to bind to only IP despite of value of `bind_address_no_port` socket field. bpf_bind() sets `with_lock` to `false` when calling to __inet_bind() and __inet6_bind() since all call-sites, where bpf_bind() is called, already hold socket lock. Signed-off-by:
Andrey Ignatov <rdna@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
Andrey Ignatov authored
Refactor `bind()` code to make it ready to be called from BPF helper function `bpf_bind()` (will be added soon). Implementation of `inet_bind()` and `inet6_bind()` is separated into `__inet_bind()` and `__inet6_bind()` correspondingly. These function can be used from both `sk_prot->bind` and `bpf_bind()` contexts. New functions have two additional arguments. `force_bind_address_no_port` forces binding to IP only w/o checking `inet_sock.bind_address_no_port` field. It'll allow to bind local end of a connection to desired IP in `bpf_bind()` w/o changing `bind_address_no_port` field of a socket. It's useful since `bpf_bind()` can return an error and we'd need to restore original value of `bind_address_no_port` in that case if we changed this before calling to the helper. `with_lock` specifies whether to lock socket when working with `struct sk` or not. The argument is set to `true` for `sk_prot->bind`, i.e. old behavior is preserved. But it will be set to `false` for `bpf_bind()` use-case. The reason is all call-sites, where `bpf_bind()` will be called, already hold that socket lock. Signed-off-by:
-
Andrey Ignatov authored
Add selftest to work with bpf_sock_addr context from `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` programs. Try to bind(2) on IP:port and apply: * loads to make sure context can be read correctly, including narrow loads (byte, half) for IP and full-size loads (word) for all fields; * stores to those fields allowed by verifier. All combination from IPv4/IPv6 and TCP/UDP are tested. Both scenarios are tested: * valid programs can be loaded and attached; * invalid programs can be neither loaded nor attached. Test passes when expected data can be read from context in the BPF-program, and after the call to bind(2) socket is bound to IP:port pair that was written by BPF-program to the context. Example: # ./test_sock_addr Attached bind4 program. Test case #1 (IPv4/TCP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Test case #2 (IPv4/UDP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Attached bind6 program. Test case #3 (IPv6/TCP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Test case #4 (IPv6/UDP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) ### SUCCESS Signed-off-by: -
Andrey Ignatov authored
== The problem == There is a use-case when all processes inside a cgroup should use one single IP address on a host that has multiple IP configured. Those processes should use the IP for both ingress and egress, for TCP and UDP traffic. So TCP/UDP servers should be bound to that IP to accept incoming connections on it, and TCP/UDP clients should make outgoing connections from that IP. It should not require changing application code since it's often not possible. Currently it's solved by intercepting glibc wrappers around syscalls such as `bind(2)` and `connect(2)`. It's done by a shared library that is preloaded for every process in a cgroup so that whenever TCP/UDP server calls `bind(2)`, the library replaces IP in sockaddr before passing arguments to syscall. When application calls `connect(2)` the library transparently binds the local end of connection to that IP (`bind(2)` with `IP_BIND_ADDRESS_NO_PORT` to avoid performance penalty). Shared library approach is fragile though, e.g.: * some applications clear env vars (incl. `LD_PRELOAD`); * `/etc/ld.so.preload` doesn't help since some applications are linked with option `-z nodefaultlib`; * other applications don't use glibc and there is nothing to intercept. == The solution == The patch provides much more reliable in-kernel solution for the 1st part of the problem: binding TCP/UDP servers on desired IP. It does not depend on application environment and implementation details (whether glibc is used or not). It adds new eBPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` and attach types `BPF_CGROUP_INET4_BIND` and `BPF_CGROUP_INET6_BIND` (similar to already existing `BPF_CGROUP_INET_SOCK_CREATE`). The new program type is intended to be used with sockets (`struct sock`) in a cgroup and provided by user `struct sockaddr`. Pointers to both of them are parts of the context passed to programs of newly added types. The new attach types provides hooks in `bind(2)` system call for both IPv4 and IPv6 so that one can write a program to override IP addresses and ports user program tries to bind to and apply such a program for whole cgroup. == Implementation notes == [1] Separate attach types for `AF_INET` and `AF_INET6` are added intentionally to prevent reading/writing to offsets that don't make sense for corresponding socket family. E.g. if user passes `sockaddr_in` it doesn't make sense to read from / write to `user_ip6[]` context fields. [2] The write access to `struct bpf_sock_addr_kern` is implemented using special field as an additional "register". There are just two registers in `sock_addr_convert_ctx_access`: `src` with value to write and `dst` with pointer to context that can't be changed not to break later instructions. But the fields, allowed to write to, are not available directly and to access them address of corresponding pointer has to be loaded first. To get additional register the 1st not used by `src` and `dst` one is taken, its content is saved to `bpf_sock_addr_kern.tmp_reg`, then the register is used to load address of pointer field, and finally the register's content is restored from the temporary field after writing `src` value. Signed-off-by:
-
Andrey Ignatov authored
Support setting `expected_attach_type` at prog load time in both `bpf/bpf.h` and `bpf/libbpf.h`. Since both headers already have API to load programs, new functions are added not to break backward compatibility for existing ones: * `bpf_load_program_xattr()` is added to `bpf/bpf.h`; * `bpf_prog_load_xattr()` is added to `bpf/libbpf.h`. Both new functions accept structures, `struct bpf_load_program_attr` and `struct bpf_prog_load_attr` correspondingly, where new fields can be added in the future w/o changing the API. Standard `_xattr` suffix is used to name the new API functions. Since `bpf_load_program_name()` is not used as heavily as `bpf_load_program()`, it was removed in favor of more generic `bpf_load_program_xattr()`. Signed-off-by:
-
Andrey Ignatov authored
== The problem == There are use-cases when a program of some type can be attached to multiple attach points and those attach points must have different permissions to access context or to call helpers. E.g. context structure may have fields for both IPv4 and IPv6 but it doesn't make sense to read from / write to IPv6 field when attach point is somewhere in IPv4 stack. Same applies to BPF-helpers: it may make sense to call some helper from some attach point, but not from other for same prog type. == The solution == Introduce `expected_attach_type` field in in `struct bpf_attr` for `BPF_PROG_LOAD` command. If scenario described in "The problem" section is the case for some prog type, the field will be checked twice: 1) At load time prog type is checked to see if attach type for it must be known to validate program permissions correctly. Prog will be rejected with EINVAL if it's the case and `expected_attach_type` is not specified or has invalid value. 2) At attach time `attach_type` is compared with `expected_attach_type`, if prog type requires to have one, and, if they differ, attach will be rejected with EINVAL. The `expected_attach_type` is now available as part of `struct bpf_prog` in both `bpf_verifier_ops->is_valid_access()` and `bpf_verifier_ops->get_func_proto()` () and can be used to check context accesses and calls to helpers correspondingly. Initially the idea was discussed by Alexei Starovoitov <ast@fb.com> and Daniel Borkmann <daniel@iogearbox.net> here: https://marc.info/?l=linux-netdev&m=152107378717201&w=2Signed-off-by:
-
- 30 Mar, 2018 3 commits
-
-
Daniel Borkmann authored
Prashant Bhole says: ==================== These patches fix sg api usage in sockmap. Previously sockmap didn't use sg_init_table(), which caused hitting BUG_ON in sg api, when CONFIG_DEBUG_SG is enabled v1: added sg_init_table() calls wherever needed. v2: - Patch1 adds new helper function in sg api. sg_init_marker() - Patch2 sg_init_marker() and sg_init_table() in appropriate places Backgroud: While reviewing v1, John Fastabend raised a valid point about unnecessary memset in sg_init_table() because sockmap uses sg table which embedded in a struct. As enclosing struct is zeroed out, there is unnecessary memset in sg_init_table. So Daniel Borkmann suggested to define another static inline function in scatterlist.h which only initializes sg_magic. Also this function will be called from sg_init_table. From this suggestion I defined a function sg_init_marker() which sets sg_magic and calls sg_mark_end() ==================== Signed-off-by: -
Prashant Bhole authored
When CONFIG_DEBUG_SG is set, sg->sg_magic is initialized in sg_init_table() and it is verified in sg api while navigating. We hit BUG_ON when magic check is failed. In functions sg_tcp_sendpage and sg_tcp_sendmsg, the struct containing the scatterlist is already zeroed out. So to avoid extra memset, we use sg_init_marker() to initialize sg_magic. Fixed following things: - In bpf_tcp_sendpage: initialize sg using sg_init_marker - In bpf_tcp_sendmsg: Replace sg_init_table with sg_init_marker - In bpf_tcp_push: Replace memset with sg_init_table where consumed sg entry needs to be re-initialized. Signed-off-by:
Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Prashant Bhole authored
sg_init_marker initializes sg_magic in the sg table and calls sg_mark_end() on the last entry of the table. This can be useful to avoid memset in sg_init_table() when scatterlist is already zeroed out For example: when scatterlist is embedded inside other struct and that container struct is zeroed out Suggested-by:
-
- 29 Mar, 2018 20 commits
-
-
Daniel Borkmann authored
John Fastabend says: ==================== This series adds the BPF_F_INGRESS flag support to the redirect APIs. Bringing the sockmap API in-line with the cls_bpf redirect APIs. We add it to both variants of sockmap programs, the first patch adds support for tx ulp hooks and the third patch adds support for the recv skb hooks. Patches two and four add tests for the corresponding ingress redirect hooks. Follow on patches can address busy polling support, but next series from me will move the sockmap sample program into selftests. v2: added static to function definition caught by kbuild bot v3: fixed an error branch with missing mem_uncharge in recvmsg op moved receive_queue check outside of RCU region ==================== Signed-off-by: -
John Fastabend authored
Add BPF_SK_SKB_STREAM_VERDICT tests for ingress hook. While we do this also bring stream tests in-line with MSG based testing. A map for skb options is added for userland to push options at BPF programs. Signed-off-by:
-
John Fastabend authored
Add support for the BPF_F_INGRESS flag in skb redirect helper. To do this convert skb into a scatterlist and push into ingress queue. This is the same logic that is used in the sk_msg redirect helper so it should feel familiar. Signed-off-by:
-
John Fastabend authored
Add a set of tests to verify ingress flag in redirect helpers works correctly with various msg sizes. Signed-off-by:
-
John Fastabend authored
Add support for the BPF_F_INGRESS flag in sk_msg redirect helper. To do this add a scatterlist ring for receiving socks to check before calling into regular recvmsg call path. Additionally, because the poll wakeup logic only checked the skb recv queue we need to add a hook in TCP stack (similar to write side) so that we have a way to wake up polling socks when a scatterlist is redirected to that sock. After this all that is needed is for the redirect helper to push the scatterlist into the psock receive queue. Signed-off-by:
-
Alexei Starovoitov authored
Jakub Kicinski says: ==================== This set adds support for update and delete calls from the datapath, as well as XADD instructions (32 and 64 bit) and pseudo random numbers. The XADD support depends on verifier enforcing alignment which Daniel recently added. XADD uses NFP's atomic engine which requires values to be in big endian, therefore we need to keep track of which parts of the values are used as atomics and byte swap them accordingly. Pseudo random numbers are generated using NFP's HW pseudo random number generator. Jiong tackles initial implementation of packet cache, which he describes as follows: Memory reads on NFP would first fetch data from memory to transfer-in registers, then move them from transfer-in to general registers. Given NFP is rich on transfer-in registers, they could serve as memory cache. This patch tries to identify a sequence of packet data read (BPF_LDX) that are executed sequentially, then the total access range of the sequence is calculated and attached to each read instruction, the first instruction in this sequence is marked with an cache init flag so the execution of it would bring in the whole range of packet data for the sequence. All later packet reads in this sequence would fetch data from transfer-in registers directly, no need to JIT NFP memory access. Function call, non-packet-data memory read, packet write and memcpy will invalidate the cache and start a new cache range. Cache invalidation could be improved in the future, for example packet write doesn't need to invalidate the cache if the the write destination won't be read again. ==================== Signed-off-by: -
Jakub Kicinski authored
When FW responds with a message of wrong size or type make sure the type is checked first and included in the wrong size message. This makes it easier to figure out which FW command failed. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by:
Jiong Wang <jiong.wang@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
NFP has a prng register, which we can read to obtain a u32 worth of pseudo random data. Generate code for it. Signed-off-by:
-
Jakub Kicinski authored
Allow atomic add to be used even when the value is not guaranteed to fit into a 16 bit immediate. This requires the value to be pulled as data, and therefore use of a transfer register and a context swap. Track the information about possible lengths of the value, if it's guaranteed to be larger than 16bits don't generate the code for the optimized case at all. Signed-off-by:
-
Jakub Kicinski authored
Allow callers to control the delay slots of commands, instead of giving them just a wait/nowait choice. Signed-off-by:
-
Jakub Kicinski authored
Implement atomic add operation for 32 and 64 bit values. Depend on the verifier to ensure alignment. Values have to be kept in big endian and swapped upon read/write. For now only support atomic add of a constant. Signed-off-by:
-
Jakub Kicinski authored
BPF_LDST_BYTES() does not put it's argument in parenthesis when referencing it. This makes it impossible to pass pointers obtained by address-of operator (e.g. BPF_LDST_BYTES(&insn)). Add the parenthesis. Signed-off-by:
-
Jakub Kicinski authored
Support calling map_delete_elem() FW helper from the datapath programs. For JIT checks and code are basically equivalent to map lookups. Similarly to other map helper key must be on the stack. Different pointer types are left for future extension. Signed-off-by:
-
Jakub Kicinski authored
Support calling map_update_elem() from the datapath programs by calling into FW-provided helper. Value pointer is passed in LM pointer #2. Keeping track of old state for arg3 is not necessary, since LM pointer #2 will be always loaded in this case, the trivial optimization for value at the bottom of the stack can't be done here. Signed-off-by:
-
Jakub Kicinski authored
Add a verifier helper for performing the basic state checks before a call to a map helper. Signed-off-by:
-
Jakub Kicinski authored
Our implementation has restriction on stack pointers for function calls. Move the common checks into a helper for reuse. The state has to be encapsulated into a structure to support parameters other than BPF_REG_2. Signed-off-by:
-
Jakub Kicinski authored
We will reuse most of map call code gen for other map calls. Rename the lookup gen function and use meta->func_id instead of hard-coding lookup. Signed-off-by:
-
Jiong Wang authored
This patch is the front end of this optimisation, it detects and marks those packet reads that could be cached. Then the optimisation "backend" will be activated automatically. Signed-off-by:
-
Jiong Wang authored
This patch add the support for unaligned read offset, i.e. the read offset to the start of packet cache area is not aligned to REG_WIDTH. In this case, the read area might across maximum three transfer-in registers. Signed-off-by:
-
Jiong Wang authored
This patch assumes there is a packet data cache, and would try to read packet data from the cache instead of from memory. This patch only implements the optimisation "backend", it doesn't build the packet data cache, so this optimisation is not enabled. This patch has only enabled aligned packet data read, i.e. when the read offset to the start of cache is REG_WIDTH aligned. Signed-off-by:
-
- 28 Mar, 2018 11 commits
-
-
Daniel Borkmann authored
Alexei Starovoitov says: ==================== v7->v8: - moved 'u32 num_args' from 'struct tracepoint' into 'struct bpf_raw_event_map' that increases memory overhead, but can be optimized/compressed later. Now it's zero changes in tracepoint.[ch] v6->v7: - adopted Steven's bpf_raw_tp_map section approach to find tracepoint and corresponding bpf probe function instead of kallsyms approach. dropped kernel_tracepoint_find_by_name() patch v5->v6: - avoid changing semantics of for_each_kernel_tracepoint() function, instead introduce kernel_tracepoint_find_by_name() helper v4->v5: - adopted Daniel's fancy REPEAT macro in bpf_trace.c in patch 6 v3->v4: - adopted Linus's CAST_TO_U64 macro to cast any integer, pointer, or small struct to u64. That nicely reduced the size of patch 1 v2->v3: - with Linus's suggestion introduced generic COUNT_ARGS and CONCATENATE macros (or rather moved them from apparmor) that cleaned up patch 6 - added patch 4 to refactor trace_iwlwifi_dev_ucode_error() from 17 args to 4 Now any tracepoint with >12 args will have build error v1->v2: - simplified api by combing bpf_raw_tp_open(name) + bpf_attach(prog_fd) into bpf_raw_tp_open(name, prog_fd) as suggested by Daniel. That simplifies bpf_detach as well which is now simple close() of fd. - fixed memory leak in error path which was spotted by Daniel. - fixed bpf_get_stackid(), bpf_perf_event_output() called from raw tracepoints - added more tests - fixed allyesconfig build caught by buildbot v1: This patch set is a different way to address the pressing need to access task_struct pointers in sched tracepoints from bpf programs. The first approach simply added these pointers to sched tracepoints: https://lkml.org/lkml/2017/12/14/753 which Peter nacked. Few options were discussed and eventually the discussion converged on doing bpf specific tracepoint_probe_register() probe functions. Details here: https://lkml.org/lkml/2017/12/20/929 Patch 1 is kernel wide cleanup of pass-struct-by-value into pass-struct-by-reference into tracepoints. Patches 2 and 3 are minor cleanups to address allyesconfig build Patch 4 refactor trace_iwlwifi_dev_ucode_error from 17 to 4 args Patch 5 introduces COUNT_ARGS macro Patch 6 introduces BPF_RAW_TRACEPOINT api. the auto-cleanup and multiple concurrent users are must have features of tracing api. For bpf raw tracepoints it looks like: // load bpf prog with BPF_PROG_TYPE_RAW_TRACEPOINT type prog_fd = bpf_prog_load(...); // receive anon_inode fd for given bpf_raw_tracepoint // and attach bpf program to it raw_tp_fd = bpf_raw_tracepoint_open("xdp_exception", prog_fd); Ctrl-C of tracing daemon or cmdline tool will automatically detach bpf program, unload it and unregister tracepoint probe. More details in patch 6. Patch 7 - trivial support in libbpf Patches 8, 9 - user space tests samples/bpf/test_overhead performance on 1 cpu: tracepoint base kprobe+bpf tracepoint+bpf raw_tracepoint+bpf task_rename 1.1M 769K 947K 1.0M urandom_read 789K 697K 750K 755K ==================== Signed-off-by:
-
Alexei Starovoitov authored
similar to traditional traceopint test add bpf_get_stackid() test from raw tracepoints and reduce verbosity of existing stackmap test Signed-off-by:
-
Alexei Starovoitov authored
add empty raw_tracepoint bpf program to test overhead similar to kprobe and traditional tracepoint tests Signed-off-by:
-
Alexei Starovoitov authored
add bpf_raw_tracepoint_open(const char *name, int prog_fd) api to libbpf Signed-off-by:
-
Alexei Starovoitov authored
Introduce BPF_PROG_TYPE_RAW_TRACEPOINT bpf program type to access kernel internal arguments of the tracepoints in their raw form. >From bpf program point of view the access to the arguments look like: struct bpf_raw_tracepoint_args { __u64 args[0]; }; int bpf_prog(struct bpf_raw_tracepoint_args *ctx) { // program can read args[N] where N depends on tracepoint // and statically verified at program load+attach time } kprobe+bpf infrastructure allows programs access function arguments. This feature allows programs access raw tracepoint arguments. Similar to proposed 'dynamic ftrace events' there are no abi guarantees to what the tracepoints arguments are and what their meaning is. The program needs to type cast args properly and use bpf_probe_read() helper to access struct fields when argument is a pointer. For every tracepoint __bpf_trace_##call function is prepared. In assembler it looks like: (gdb) disassemble __bpf_trace_xdp_exception Dump of assembler code for function __bpf_trace_xdp_exception: 0xffffffff81132080 <+0>: mov %ecx,%ecx 0xffffffff81132082 <+2>: jmpq 0xffffffff811231f0 <bpf_trace_run3> where TRACE_EVENT(xdp_exception, TP_PROTO(const struct net_device *dev, const struct bpf_prog *xdp, u32 act), The above assembler snippet is casting 32-bit 'act' field into 'u64' to pass into bpf_trace_run3(), while 'dev' and 'xdp' args are passed as-is. All of ~500 of __bpf_trace_*() functions are only 5-10 byte long and in total this approach adds 7k bytes to .text. This approach gives the lowest possible overhead while calling trace_xdp_exception() from kernel C code and transitioning into bpf land. Since tracepoint+bpf are used at speeds of 1M+ events per second this is valuable optimization. The new BPF_RAW_TRACEPOINT_OPEN sys_bpf command is introduced that returns anon_inode FD of 'bpf-raw-tracepoint' object. The user space looks like: // load bpf prog with BPF_PROG_TYPE_RAW_TRACEPOINT type prog_fd = bpf_prog_load(...); // receive anon_inode fd for given bpf_raw_tracepoint with prog attached raw_tp_fd = bpf_raw_tracepoint_open("xdp_exception", prog_fd); Ctrl-C of tracing daemon or cmdline tool that uses this feature will automatically detach bpf program, unload it and unregister tracepoint probe. On the kernel side the __bpf_raw_tp_map section of pointers to tracepoint definition and to __bpf_trace_*() probe function is used to find a tracepoint with "xdp_exception" name and corresponding __bpf_trace_xdp_exception() probe function which are passed to tracepoint_probe_register() to connect probe with tracepoint. Addition of bpf_raw_tracepoint doesn't interfere with ftrace and perf tracepoint mechanisms. perf_event_open() can be used in parallel on the same tracepoint. Multiple bpf_raw_tracepoint_open("xdp_exception", prog_fd) are permitted. Each with its own bpf program. The kernel will execute all tracepoint probes and all attached bpf programs. In the future bpf_raw_tracepoints can be extended with query/introspection logic. __bpf_raw_tp_map section logic was contributed by Steven Rostedt Signed-off-by:Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by:
-
Alexei Starovoitov authored
move COUNT_ARGS() macro from apparmor to generic header and extend it to count till twelve. COUNT() was an alternative name for this logic, but it's used for different purpose in many other places. Similarly for CONCATENATE() macro. Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alexei Starovoitov authored
fix iwlwifi_dev_ucode_error tracepoint to pass pointer to a table instead of all 17 arguments by value. dvm/main.c and mvm/utils.c have 'struct iwl_error_event_table' defined with very similar yet subtly different fields and offsets. tracepoint is still common and using definition of 'struct iwl_error_event_table' from dvm/commands.h while copying fields. Long term this tracepoint probably should be split into two. Signed-off-by:
-
Alexei Starovoitov authored
two trace events defined with the same name and both unused. They conflict in allyesconfig build. Rename one of them. Signed-off-by:
-
Alexei Starovoitov authored
two trace events defined with the same name and both unused. They conflict in allyesconfig build. Rename one of them. Signed-off-by:
-
Alexei Starovoitov authored
- fix trace_hfi1_ctxt_info() to pass large struct by reference instead of by value - convert 'type array[]' tracepoint arguments into 'type *array', since compiler will warn that sizeof('type array[]') == sizeof('type *array') and later should be used instead The CAST_TO_U64 macro in the later patch will enforce that tracepoint arguments can only be integers, pointers, or less than 8 byte structures. Larger structures should be passed by reference. Signed-off-by: -
Nikita V. Shirokov authored
Sample usage for tos ... bpf_getsockopt(skops, SOL_IP, IP_TOS, &v, sizeof(v)) ... where skops is a pointer to the ctx (struct bpf_sock_ops). Signed-off-by:
Nikita V. Shirokov <tehnerd@fb.com> Signed-off-by:
-
