Any set_lcd_level() call can fail for one of two reasons: either
requested brightness is outside the allowed range or the ACPI method
used for setting brightness level is not available.  For
bl_update_status(), the first case is handled by backlight core, which
means bl_update_status() will not even be called if requested brightness
is outside the allowed range.  The second case will be logged anyway by
set_lcd_level() itself, so there is no point in generating another
message in bl_update_status().  Remove the superfluous debug message
along with a local variable that is now redundant.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Not all Fujitsu laptops support controlling backlight power through the
FUJ02E3 ACPI device.  Remove the debug message informing about a failed
attempt to set backlight power as it may be confusing and the return
value of call_fext_func() is logged anyway.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Due to the way the disable_brightness_adjust module parameter is
currently handled in acpi_fujitsu_bl_add(), it can only be set to either
0 or 1, which effectively makes it a boolean.  Emphasize that by
changing module parameter type to bool.  Do not announce parameter value
in a debug message as it can be dynamically changed via sysfs and its
current value can also be read from there.  Clean up module parameter
description.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

The value of each module parameter can be changed on the fly via sysfs.
However, the current way of handling use_alt_lcd_levels prevents the
user from dynamically switching from a value of 0 or 1 back to
autodetection as the latter is only performed upon ACPI device
instantiation.  Fix this by moving autodetection (in a simplified form)
to set_lcd_level() and changing module parameter type to int.  Do not
announce autodetection results in a debug message as current value of
use_alt_lcd_levels can simply be read from sysfs.  Clarify module
parameter description.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

When using brightness keys and backlight device's sysfs interface
alternately, an incorrect input event might be generated for a
brightness key press.  Consider the following sequence of events:

 1. Set backlight brightness to 6 using brightness keys.
 2. Write 4 to /sys/class/backlight/fujitsu-laptop/brightness.
 3. Press the "brightness up" key.

The input event generated in this scenario would be KEY_BRIGHTNESSDOWN,
because before step 3 brightness_level would still be at 6.  As the new
brightness level is established using GBLL, it would evaluate to 5
(SBLL/SBL2 sets it to 4 in step 2 and pressing the "brightness up" key
increases it by 1).  This in turn would cause acpi_fujitsu_bl_notify()
to observe a 6 -> 5 change, i.e. a decrease in brightness, while screen
brightness would in fact be increased.

Fix this by updating brightness_level in set_lcd_level.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

acpi_execute_simple_method() takes a method parameter which tells it to
look for the given method underneath the given handle, so calling
acpi_get_handle() beforehand is redundant.  Replace the call to
acpi_get_handle() with a call to acpi_execute_simple_method(), thus
eliminating the need for a local variable storing the handle.  Update
debug message to reflect this change.  Also do not assign a default
value to status as it has no influence on execution flow.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Depending on the value of the use_alt_lcd_levels module parameter, one
of two functions is used for setting LCD brightness level.  These
functions are almost identical and only differ in the name of the ACPI
method they call.  Instead of checking the value of use_alt_lcd_levels
at each call site, move that check to set_lcd_level() and get rid of
set_lcd_level_alt().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Use a managed backlight device to get rid of acpi_fujitsu_bl_remove().
Change the parent of the backlight device from NULL to the FUJ02B1 ACPI
device as the latter is required for the backlight device to work.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

The backlight part of fujitsu-laptop is only used by laptops which are
incapable of using the standard ACPI video interface for handling
brightness changes.  Conversely, on laptops which are capable of using
the latter, no vendor-specific ACPI calls should be made unless
explicitly requested by the user.  Bail out immediately from
acpi_fujitsu_bl_add() unless using the vendor-specific interface was
either explicitly requested by the user or automatically selected by the
kernel.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Update debug message logged when the acpi_evaluate_integer() call inside
call_fext_func() fails so that it covers a broader set of possible
errors.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

A new call to SCU intel_scu_ipc_raw_command() writes SPTR and DPTR
registers before sending a command.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

For better maintainability and readability introduce a macro
for device ID table.

No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The driver is bound to the devices based on their PCI IDs.

There is no need to do an additional check.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Device pointer is used as a flag that everything is prepared.
Nevertheless the assignment happened quite before and there is a window
when a caller can get weird results or even crashes since not all fields
are initialized yet.

Rearrange initialization sequence in ->probe() to prepare everything
before use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Fail ->probe() if there is no platform data supplied.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There is no point in registering I2C bus notifier if DMI data does not
match.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[andy: updated due to previous patch changed]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

I2C bus has both i2c clients and adapter devices, so we must be careful in
notifier code and verify that we are actually dealing with an i2c client
before using it as such.

Fixes: cef9dd85 ("platform/x86: add support for devices with Silead...")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[andy: simplified silead_ts_dmi_add_props() change]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Asus laptop X302UA starts up with Wi-Fi disabled,
without a way to enable it. Set wapf=4 to fix the problem.
Signed-off-by: Santeri Toivonen <santeri.toivonen@vatsul.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Rename call_fext_func() arguments so that each argument's name signifies
its role:

  - cmd -> func: sub-function to call (flags, buttons etc.),
  - arg0 -> op: operation to perform (get, set, get capabilities etc.),
  - arg1 -> feature: feature to act on (e.g. which LED), if relevant,
  - arg2 -> state: state to set (e.g. LED on or off), if relevant.

Adjust whitespace to make checkpatch happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

acpi_evaluate_integer() takes a pathname parameter which contains the
name of the entity to evaluate underneath the given handle, so calling
acpi_get_handle() beforehand is redundant.  Replace the call to
acpi_get_handle() with a call to acpi_evaluate_integer(), thus
eliminating the need for a local variable storing the handle.  Adjust
whitespace to make checkpatch happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Set values of FUNC call parameters in a designated initializer.  Do not
initialize status and handle variables as the values these are
initialized to have no influence on execution flow.  Use an array
variable instead of the address of the first element of that array.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Remove the keycode[1-5] fields from struct fujitsu_bl as they are not
needed any more as a result of the sparse keymap migration.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Some laptop models need to have different keycodes assigned to hotkey
scancodes.  Change the sparse keymap upon a DMI match, before the hotkey
input device is setup.

Instead of using three different callbacks in the DMI match table,
simplify code by using the driver_data field of struct dmi_system_id to
supply the requested keymap to a common callback.  Also merge keymaps
for S6410 and S6420 as they are identical.

Rename fujitsu_dmi_table to fujitsu_laptop_dmi_table to emphasize it is
no longer used by the backlight part of fujitsu-laptop.  Adjust
whitespace to make checkpatch happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Simplify hotkey event generation by using a sparse keymap.  As sparse
keymap operates on scancodes instead of keycodes, adjust variable names
and debug messages accordingly.

This patch only handles the default keymap for clarity.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
[dvhart: correct flag passed to call_fext_func in acpi_fujitsu_laptop_notify]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Use a managed input device for hotkey events in order to simplify two
error paths and one cleanup function while also reducing the number of
local variables required.  Remove double assignment to make checkpatch
happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Simplify error handling in acpi_fujitsu_laptop_add() by moving code
responsible for setting up the input device to a separate function.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Simplify brightness key event generation by using a sparse keymap.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Use a managed input device for brightness events in order to simplify
two error paths and one cleanup function while also reducing the number
of local variables required.  Remove double assignment to make
checkpatch happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Simplify error handling in acpi_fujitsu_bl_add() by moving code
responsible for setting up the input device to a separate function.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Merge branch 'dell-laptop-changes-for-4.12' of
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
to avoid linux-next merge conflict with dell-laptop.c.
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Add an entry providing the necessary info to make the touchscreen work
on various tablets based on the Insyde 7W whitebox tablet.

This has been tested on a DEXP Ursus 7W tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Now that device_add_properties takes a const property_entry * rather
then a non-const one we can constify the properties arrays.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Make dell-wmi notify on hotkey kbd brightness changes, listen for this
in dell-laptop and call led_classdev_notify_brightness_hw_changed.

This will allow userspace to monitor (poll) for brightness changes on
these LEDs caused by the hotkey.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

The kbd led code has multiple entry points each of which modifies the
kbd_state by reading it, modifying a copy, writing the copy and on
error setting the modified copy writing back the original state.

This is racy, so add a mutex protection the read-modify-write cycle
on each of the entry points.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Return -EINVAL immediately on invalid input, rather then doing
the straight path in an if block and returning -EINVAL at the end
of the function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

There are several cases where events handled in one of the dell-* drivers
need to be propagated to another dell-* driver.

This commit adds 3 generic functions:
dell_laptop_register_notifier()
dell_laptop_unregister_notifier()
dell_laptop_call_notifier()

It currently only defines 1 action:
DELL_LAPTOP_KBD_BACKLIGHT_BRIGHTNESS_CHANGED

Which is intended to propagate kbd_backlight_brightness_changed wmi
events from dell-wmi to dell-laptop (which contains the actual kbd
backlight driver).

These functions are put in dell-smbios as both dell-wmi and dell-laptop
use smbios functions and I do not want to put the notifier head in
either driver, as that will make the 2 drivers depend on each other.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Both struct fujitsu_bl and struct fujitsu_laptop have a pf_device field.
Up until now the latter has been redundant, which is logically incorrect
because the primary function of the platform device created by
fujitsu-laptop is to provide laptop-related (not brightness-related)
attributes to userspace.

Remove the pf_device field from struct fujitsu_bl and make all module
code use the pf_device field of struct fujitsu_laptop instead.
Suggested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

The platform device registered by fujitsu-laptop is registered
unconditionally while sysfs attributes attached to it depend on the
FUJ02E3 ACPI device being present.  Fix this by moving platform device
creation and removal to acpi_fujitsu_laptop_add() and
acpi_fujitsu_laptop_remove(), respectively.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Platform device handling adds a lot of complexity to fujitsu_init(),
which hinders its readability.  Extract code responsible for adding and
removing the platform device to separate functions.  Adjust whitespace
to make checkpatch happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Use the DEVICE_ATTR_RO() macro to get rid of ignore_store() and shorten
attribute definitions.  Adjust whitespace to make checkpatch happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>