- 06 Jun, 2012 6 commits
-
-
Oleg Nesterov authored
A separate patch to simplify the review, and for the documentation. The patch adds another "int *is_swbp" argument to find_active_uprobe(), so far its only caller doesn't use this info. With this patch find_active_uprobe() additionally does: - if find_vma() + ->vm_start check fails, *is_swbp = -EFAULT - otherwise, if valid_vma() + find_uprobe() fails, it holds the result of is_swbp_at_addr(), can be negative too. The latter is only possible if we raced with another thread which did munmap/etc after we hit this bp. IOW. If find_active_uprobe(&is_swbp) returns NULL, the caller can look at is_swbp to figure out whether the current insn is bp or not, or detect the race with another thread if it is negative. Note: I think that performance-wise this change is fine. This adds is_swbp_at_addr(), but only if we raced with uprobe_unregister() or if we hit the "normal" int3 but this mm has uprobes as well. And even in this case the slow read_opcode() path is very unlikely, this insn recently triggered do_int3(), __copy_from_user_inatomic() shouldn't fail in the likely case. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120529192914.GD8057@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Oleg Nesterov authored
No functional changes. Move the "find uprobe" code from handle_swbp() to the new helper, find_active_uprobe(). Note: with or without this change, the find-active-uprobe logic is not exactly right. We can race with another thread which unmaps the memory with the valid uprobe before we take mm->mmap_sem. We can't find this uprobe simply because find_vma() fails. In this case we wrongly assume that this trap was not caused by uprobe and send the erroneous SIGTRAP. See the next changes. Signed-off-by:
-
Oleg Nesterov authored
set_orig_insn()->read_opcode() should not fail if the probed task did mprotect() after uprobe_register(), change it to use FOLL_FORCE. Without FOLL_WRITE this doesn't have any "side" effect but allows to read the !VM_READ memory. There is another reason for this change, we are going to use is_swbp_at_addr() from handle_swbp() which can race with another thread doing mprotect(). Signed-off-by:
-
Oleg Nesterov authored
Change is_swbp_at_addr() to try to avoid the costly read_opcode() if mm == current->mm, __copy_from_user_inatomic() should succeed in the likely case. Currently this optimization is not important, but we are going to add more is_swbp_at_addr(current->mm) callers. Signed-off-by:
-
Masami Hiramatsu authored
Fix the x86 instruction decoder to decode bsr/bsf/jmpe with operand-size prefix (66h). This fixes the test case failure reported by Linus, attached below. bsf/bsr/jmpe have a special encoding. Opcode map in Intel Software Developers Manual vol2 says they have TZCNT/LZCNT variants if it has F3h prefix. However, there is no information if it has other 66h or F2h prefixes. Current instruction decoder supposes that those are bad instructions, but it actually accepts at least operand-size prefixes. H. Peter Anvin further explains: " TZCNT/LZCNT are F3 + BSF/BSR exactly because the F2 and F3 prefixes have historically been no-ops with most instructions. This allows software to unconditionally use the prefixed versions and get TZCNT/LZCNT on the processors that have them if they don't care about the difference. " This fixes errors reported by test_get_len: Warning: arch/x86/tools/test_get_len found difference at <em_bsf>:ffffffff81036d87 Warning: ffffffff81036de5: 66 0f bc c2 bsf %dx,%ax Warning: objdump says 4 bytes, but insn_get_length() says 3 Warning: arch/x86/tools/test_get_len found difference at <em_bsr>:ffffffff81036ea6 Warning: ffffffff81036f04: 66 0f bd c2 bsr %dx,%ax Warning: objdump says 4 bytes, but insn_get_length() says 3 Warning: decoded and checked 13298882 instructions with 2 warnings Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Reported-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <yrl.pp-manager.tt@hitachi.com> Link: http://lkml.kernel.org/r/20120604150911.22338.43296.stgit@localhost.localdomainSigned-off-by:
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf fixes from Arnaldo Carvalho de Melo: * Endianness fixes from Jiri Olsa * Fixes for make perf tarball * Fix for DSO name in perf script callchains, from David Ahern * Segfault fixes for perf top --callchain, from Namhyung Kim * Minor function result fixes from Srikar Dronamraju * Add missing 3rd ioctl parameter, from Namhyung Kim * Fix pager usage in minimal embedded systems, from Avik Sil Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
- 05 Jun, 2012 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse updates from Miklos Szeredi. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix blksize calculation fuse: fix stat call on 32 bit platforms fuse: optimize fallocate on permanent failure fuse: add FALLOCATE operation fuse: Convert to kstrtoul_from_user
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar. * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Remove NULL assignment of dattr_cur sched: Remove the last NULL entry from sched_feat_names sched: Make sched_feat_names const sched/rt: Fix SCHED_RR across cgroups sched: Move nr_cpus_allowed out of 'struct sched_rt_entity' sched: Make sure to not re-read variables after validation sched: Fix SD_OVERLAP sched: Don't try allocating memory from offline nodes sched/nohz: Fix rq->cpu_load calculations some more sched/x86: Use cpu_llc_shared_mask(cpu) for coregroup_mask
-
- 04 Jun, 2012 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/{signal,vfs}Linus Torvalds authored
Pull signal and vfs compile breakage fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: fixups for signal breakage * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: nommu: fix compilation of nommu.c
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French. * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Move get_next_mid to ops struct CIFS: Make accessing is_valid_oplock/dump_detail ops struct field safe CIFS: Improve identation in cifs_unlock_range CIFS: Fix possible wrong memory allocation
-
Al Viro authored
Obvious brainos spotted by Geert. Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Greg Ungerer authored
Compiling 3.5-rc1 for nommu targets gives: CC mm/nommu.o mm/nommu.c: In function ‘sys_mmap_pgoff’: mm/nommu.c:1489:2: error: ‘ret’ undeclared (first use in this function) mm/nommu.c:1489:2: note: each undeclared identifier is reported only once for each function it appears in It is trivially fixed by replacing 'ret' with the local variable that is already defined for the return value 'retval'. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mmLinus Torvalds authored
Pull frontswap feature from Konrad Rzeszutek Wilk: "Frontswap provides a "transcendent memory" interface for swap pages. In some environments, dramatic performance savings may be obtained because swapped pages are saved in RAM (or a RAM-like device) instead of a swap disk. This tag provides the basic infrastructure along with some changes to the existing backends." Fix up trivial conflict in mm/Makefile due to removal of swap token code changing a line next to the new frontswap entry. This pull request came in before the merge window even opened, it got delayed to after the merge window by me just wanting to make sure it had actual users. Apparently IBM is using this on their embedded side, and Jan Beulich says that it's already made available for SLES and OpenSUSE users. Also acked by Rik van Riel, and Konrad points to other people liking it too. So in it goes. By Dan Magenheimer (4) and Konrad Rzeszutek Wilk (2) via Konrad Rzeszutek Wilk * tag 'stable/frontswap.v16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm: frontswap: s/put_page/store/g s/get_page/load MAINTAINER: Add myself for the frontswap API mm: frontswap: config and doc files mm: frontswap: core frontswap functionality mm: frontswap: core swap subsystem hooks and headers mm: frontswap: add frontswap header file
-
Linus Torvalds authored
Merge branches 'irq-urgent-for-linus' and 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq and smpboot updates from Thomas Gleixner: "Just cleanup patches with no functional change and a fix for suspend issues." * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Introduce irq_do_set_affinity() to reduce duplicated code genirq: Add IRQS_PENDING for nested and simple irq * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smpboot, idle: Fix comment mismatch over idle_threads_init() smpboot, idle: Optimize calls to smp_processor_id() in idle_threads_init()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "The clocksource driver is pure hardware enablement and the skew option is default off, well tested and non dangerous." * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Move skew_tick option into the HIGH_RES_TIMER section clocksource: em_sti: Add DT support clocksource: em_sti: Emma Mobile STI driver clockevents: Make clockevents_config() a global symbol tick: Add tick skew boot option
-
Linus Torvalds authored
Cyrill Gorcunov reports that I broke the fdinfo files with commit 30a08bf2 ("proc: move fd symlink i_mode calculations into tid_fd_revalidate()"), and he's quite right. The tid_fd_revalidate() function is not just used for the <tid>/fd symlinks, it's also used for the <tid>/fdinfo/<fd> files, and the permission model for those are different. So do the dynamic symlink permission handling just for symlinks, making the fdinfo files once more appear as the proper regular files they are. Of course, Al Viro argued (probably correctly) that we shouldn't do the symlink permission games at all, and make the symlinks always just be the normal 'lrwxrwxrwx'. That would have avoided this issue too, but since somebody noticed that the permissions had changed (which was the reason for that original commit 30a08bf2 in the first place), people do apparently use this feature. [ Basically, you can use the symlink permission data as a cheap "fdinfo" replacement, since you see whether the file is open for reading and/or writing by just looking at st_mode of the symlink. So the feature does make sense, even if the pain it has caused means we probably shouldn't have done it to begin with. ] Reported-and-tested-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Kukjin Kim authored
Should be 'exynos5_xxx' instead of 'exonys5_xxx'. It happened at the commit 30b84288 ("Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc") during v3.5 merge window. Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> [ My bad - Linus ] Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull some left-over PM patches from Rafael J. Wysocki. * 'pm-acpi' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Make acpi_pm_device_sleep_state() follow the specification ACPI / PM: Make __acpi_bus_get_power() cover D3cold correctly ACPI / PM: Fix error messages in drivers/acpi/bus.c rtc-cmos / PM: report wakeup event on ACPI RTC alarm ACPI / PM: Generate wakeup events on fixed power button
-
Linus Torvalds authored
This reverts commit 5ceb9ce6. That commit seems to be the cause of the mm compation list corruption issues that Dave Jones reported. The locking (or rather, absense there-of) is dubious, as is the use of the 'page' variable once it has been found to be outside the pageblock range. So revert it for now, we can re-visit this for 3.6. If we even need to: as Minchan Kim says, "The patch wasn't a bug fix and even test workload was very theoretical". Reported-and-tested-by:
Dave Jones <davej@redhat.com> Acked-by:
Hugh Dickins <hughd@google.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@gmail.com> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Hugh Dickins authored
New tmpfs use of !PageUptodate pages for fallocate() is triggering the WARNING: at mm/page-writeback.c:1990 when __set_page_dirty_nobuffers() is called from migrate_page_copy() for compaction. It is anomalous that migration should use __set_page_dirty_nobuffers() on an address_space that does not participate in dirty and writeback accounting; and this has also been observed to insert surprising dirty tags into a tmpfs radix_tree, despite tmpfs not using tags at all. We should probably give migrate_page_copy() a better way to preserve the tag and migrate accounting info, when mapping_cap_account_dirty(). But that needs some more work: so in the interim, avoid the warning by using a simple SetPageDirty on PageSwapBacked pages. Reported-and-tested-by:
-
- 03 Jun, 2012 3 commits
-
-
Linus Torvalds authored
The comment above it says "Stat data, not accessed from path walking", but in fact some of inode fields we use for the common stat data was way down at the end of the inode, causing unnecessary cache misses for the common stat operations. The inode structure is pretty big, and this can change padding depending on field width, but at least on the common 64-bit configurations this doesn't change the size. Some of our inode layout has historically been to tro to avoid unnecessary padding fields, but cache locality is at least as important for layout, if not more. Noticed by looking at kernel profiles, and noticing that the "i_blkbits" access stood out like a sore thumb. Signed-off-by: -
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dmLinus Torvalds authored
Pull device-mapper updates from Alasdair G Kergon: "Improve multipath's retrying mechanism in some defined circumstances and provide a simple reserve/release mechanism for userspace tools to access thin provisioning metadata while the pool is in use." * tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm thin: provide userspace access to pool metadata dm thin: use slab mempools dm mpath: allow ioctls to trigger pg init dm mpath: delay retry of bypassed pg dm mpath: reduce size of struct multipath
-
- 02 Jun, 2012 17 commits
-
-
Joe Thornber authored
This patch implements two new messages that can be sent to the thin pool target allowing it to take a snapshot of the _metadata_. This, read-only snapshot can be accessed by userland, concurrently with the live target. Only one metadata snapshot can be held at a time. The pool's status line will give the block location for the current msnap. Since version 0.1.5 of the userland thin provisioning tools, the thin_dump program displays the msnap as follows: thin_dump -m <msnap root> <metadata dev> Available here: https://github.com/jthornber/thin-provisioning-tools Now that userland can access the metadata we can do various things that have traditionally been kernel side tasks: i) Incremental backups. By using metadata snapshots we can work out what blocks have changed over time. Combined with data snapshots we can ensure the data doesn't change while we back it up. A short proof of concept script can be found here: https://github.com/jthornber/thinp-test-suite/blob/master/incremental_backup_example.rb ii) Migration of thin devices from one pool to another. iii) Merging snapshots back into an external origin. iv) Asyncronous replication. Signed-off-by:Joe Thornber <ejt@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com>
-
Mike Snitzer authored
Use dedicated caches prefixed with a "dm_" name rather than relying on kmalloc mempools backed by generic slab caches so the memory usage of thin provisioning (and any leaks) can be accounted for independently. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
After the failure of a group of paths, any alternative paths that need initialising do not become available until further I/O is sent to the device. Until this has happened, ioctls return -EAGAIN. With this patch, new paths are made available in response to an ioctl too. The processing of the ioctl gets delayed until this has happened. Instead of returning an error, we submit a work item to kmultipathd (that will potentially activate the new path) and retry in ten milliseconds. Note that the patch doesn't retry an ioctl if the ioctl itself fails due to a path failure. Such retries should be handled intelligently by the code that generated the ioctl in the first place, noting that some SCSI commands should not be retried because they are not idempotent (XOR write commands). For commands that could be retried, there is a danger that if the device rejected the SCSI command, the path could be errorneously marked as failed, and the request would be retried on another path which might fail too. It can be determined if the failure happens on the device or on the SCSI controller, but there is no guarantee that all SCSI drivers set these flags correctly. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Mike Christie authored
If I/O needs retrying and only bypassed priority groups are available, set the pg_init_delay_retry flag to wait before retrying. If, for example, the reason for the bypass is that the controller is getting reset or there is a firmware upgrade happening, retrying right away would cause a flood of log messages and retries for what could be a few seconds or even several minutes. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Acked-by:
-
Mike Snitzer authored
Move multipath structure's 'lock' and 'queue_size' members to eliminate two 4-byte holes. Also use a bit within a single unsigned int for each existing flag (saves 8-bytes). This allows future flags to be added without each consuming an unsigned int. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking updates from David Miller: 1) Make syn floods consume significantly less resources by a) Not pre-COW'ing routing metrics for SYN/ACKs b) Mirroring the device queue mapping of the SYN for the SYN/ACK reply. Both from Eric Dumazet. 2) Fix calculation errors in Byte Queue Limiting, from Hiroaki SHIMODA. 3) Validate the length requested when building a paged SKB for a socket, so we don't overrun the page vector accidently. From Jason Wang. 4) When netlabel is disabled, we abort all IP option processing when we see a CIPSO option. This isn't the right thing to do, we should simply skip over it and continue processing the remaining options (if any). Fix from Paul Moore. 5) SRIOV fixes for the mellanox driver from Jack orgenstein and Marcel Apfelbaum. 6) 8139cp enables the receiver before the ring address is properly programmed, which potentially lets the device crap over random memory. Fix from Jason Wang. 7) e1000/e1000e fixes for i217 RST handling, and an improper buffer address reference in jumbo RX frame processing from Bruce Allan and Sebastian Andrzej Siewior, respectively. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: fec_mpc52xx: fix timestamp filtering mcs7830: Implement link state detection e1000e: fix Rapid Start Technology support for i217 e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats() r8169: call netif_napi_del at errpaths and at driver unload tcp: reflect SYN queue_mapping into SYNACK packets tcp: do not create inetpeer on SYNACK message 8139cp/8139too: terminate the eeprom access with the right opmode 8139cp: set ring address before enabling receiver cipso: handle CIPSO options correctly when NetLabel is disabled net: sock: validate data_len before allocating skb in sock_alloc_send_pskb() bql: Avoid possible inconsistent calculation. bql: Avoid unneeded limit decrement. bql: Fix POSDIFF() to integer overflow aware. net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAP net/mlx4_core: Check port out-of-range before using in mlx4_slave_cap net/mlx4_core: Fixes for VF / Guest startup flow net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_event net/mlx4_core: Fix number of EQs used in ICM initialisation net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_int -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull straggler x86 fixes from Peter Anvin: "Three groups of patches: - EFI boot stub documentation and the ability to print error messages; - Removal for PTRACE_ARCH_PRCTL for x32 (obsolete interface which should never have been ported, and the port is broken and potentially dangerous.) - ftrace stack corruption fixes. I'm not super-happy about the technical implementation, but it is probably the least invasive in the short term. In the future I would like a single method for nesting the debug stack, however." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32 x86, efi: Add EFI boot stub documentation x86, efi; Add EFI boot stub console support x86, efi: Only close open files in error path ftrace/x86: Do not change stacks in DEBUG when calling lockdep x86: Allow nesting of the debug stack IDT setting x86: Reset the debug_stack update counter ftrace: Use breakpoint method to update ftrace caller ftrace: Synchronize variable setting with breakpoints -
Linus Torvalds authored
This reverts the tty layer change to use per-tty locking, because it's not correct yet, and fixing it will require some more deep surgery. The main revert is d29f3ef3 ("tty_lock: Localise the lock"), but there are several smaller commits that built upon it, they also get reverted here. The list of reverted commits is: fde86d31 - tty: add lockdep annotations 8f6576ad - tty: fix ldisc lock inversion trace d3ca8b64 - pty: Fix lock inversion b1d679af - tty: drop the pty lock during hangup abcefe5f - tty/amiserial: Add missing argument for tty_unlock() fd11b42e - cris: fix missing tty arg in wait_event_interruptible_tty call d29f3ef3 - tty_lock: Localise the lock The revert had a trivial conflict in the 68360serial.c staging driver that got removed in the meantime. Signed-off-by:
-
Stephan Gatzka authored
skb_defer_rx_timestamp was called with a freshly allocated skb but must be called with rskb instead. Signed-off-by:
Stephan Gatzka <stephan@gatzka.org> Cc: stable <stable@vger.kernel.org> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ondrej Zary authored
Add .status callback that detects link state changes. Tested with MCS7832CV-AA chip (9710:7830, identified as rev.C by the driver). Fixes https://bugzilla.kernel.org/show_bug.cgi?id=28532Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/{vfs,signal}Linus Torvalds authored
Pull vfs fix and a fix from the signal changes for frv from Al Viro. The __kernel_nlink_t for powerpc got scrogged because 64-bit powerpc actually depended on the default "unsigned long", while 32-bit powerpc had an explicit override to "unsigned short". Al didn't notice, and made both of them be the unsigned short. The frv signal fix is fallout from simplifying the do_notify_resume() code, and leaving an extra parenthesis. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: powerpc: Fix size of st_nlink on 64bit * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: frv: Remove bogus closing parenthesis
-
Anton Blanchard authored
commit e57f93cc (powerpc: get rid of nlink_t uses, switch to explicitly-sized type) changed the size of st_nlink on ppc64 from a long to a short, resulting in boot failures. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Geert Uytterhoeven authored
Introduced by commit 6fd84c08 ("TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Bruce Allan authored
The definition of I217_PROXY_CTRL must use the BM_PHY_REG() macro instead of the PHY_REG() macro for PHY page 800 register 70 since it is for a PHY register greater than the maximum allowed by the latter macro, and fix a typo setting the I217_MEMPWR register in e1000_suspend_workarounds_ich8lan. Also for clarity, rename a few defines as bit definitions instead of masks. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Sebastian Andrzej Siewior authored
This is another fixup where the data is not transfered into buffer addressed by skb->data but into a page. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by:
-
Linus Torvalds authored
Merge fixups for the mac NLS tables from Andrew. * emailed from Andrew Morton, and one cleanup by me: nls: fix (and rename) mac NLS table files and config options fs/nls/Makefile: remove bogus CONFIG_ assignments
-
Linus Torvalds authored
The config options in the Kconfig file (with _CODEPAGE_ in the name) didn't match the config option name in the Makefile (no _CODEPAGE_). And both of them were of the hard-to-read MACXYZZY variety, which made them hard to parse for normal humans: MACROMAN easily reads as "macro man", not as "Mac Roman". So rename the options to be consistent, and be NLS_MAC_xyzzy. Rename the files to be mac-xyzzy.c too, and drop the "nls" part entirely (it's already in the directory name). Signed-off-by:
-
