- 16 Dec, 2008 31 commits
-
-
Paulius Zaleckas authored
Drivers which are going to use it will have to select it and use mxc_set_irq_fiq() to set FIQ mode for this interrupt. Signed-off-by:
Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de>
-
Paulius Zaleckas authored
Adds support for MX1 architecture to UART driver. Signed-off-by:
-
Darius Augulis authored
Adds MTD XIP support for ARCH_MX1. Signed-off-by:
Darius Augulis <augulis.darius@gmail.com> Signed-off-by:
-
Darius Augulis authored
Adds common devices to ARCH_MX1. Signed-off-by:
-
Paulius Zaleckas authored
Adds MX1 architecture to platform MXC. It will supersede mach-imx and let it die. Signed-off-by:
-
Darius Augulis authored
Fix GIUS register setup in the mxc_gpio_mode(). Signed-off-by:
-
Valentin Longchamp authored
Signed-off-by:
Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by:
-
Valentin Longchamp authored
Initial support for mx31moboard platfor with 3 serial ports and NOR Flash Signed-off-by:
-
Valentin Longchamp authored
pins definition for UART5 when used in alternate mode 2 Signed-off-by:
-
Valentin Longchamp authored
UART2 pins when used in functionnal mode Signed-off-by:
-
Marc Kleine-Budde authored
Use readl/writel instead of direct pointer deref. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Marc Kleine-Budde authored
This removes clkrt and cmdat from struct imxmci_host, they are unused. Signed-off-by:
-
Marc Kleine-Budde authored
This cleans up the warnings issued by the checkpatch script and remove the file history from the header Signed-off-by:
-
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
This patch adds the platform device and resources for NAND on mx27 boards. Signed-off-by: -
Fabio Estevam authored
Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Fabio Estevam authored
Add basic support to the MX31PDK development board, also known as MX31 3DS or MX31 3-stack board (http://www.freescale.com/imx31pdk). Signed-off-by:
-
Sascha Hauer authored
Signed-off-by: -
Guennadi Liakhovetski authored
smc911x now also supports LAN921{5,7,8} network controllers. Signed-off-by:Guennadi Liakhovetski <lg@denx.de> Signed-off-by:
-
Sascha Hauer authored
The pcm038 module (phyCORE-i.MX27) comes with a 512 KiB static RAM which can be battery buffered. Add mtd_ram support and configure the chip select line, to which the sram is attached. Signed-off-by:
Luotao Fu <l.fu@pengutronix.de> Signed-off-by:
-
Guennadi Liakhovetski authored
mxc_iomux_set_pad() is buggy on i.MX31 - it calculates the register and the offset therein wrongly. Fix it. Signed-off-by:
-
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
mxc_gpio_setup_multiple_pins used to take several ALLOC_MODE flags. Most of them are unused, so simplify the function by removing the flags. Also, instead of using a confusing MXC_GPIO_ALLOC_MODE_RELEASE flag in a function having alloc in its name, add a mxc_gpio_release_multiple_pins function. Signed-off-by: -
Julien Boibessot authored
Signed-off-by:
Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by:
-
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
The MX2 has 5 gpio ports, IRQ_GPIOE was missing so far. Signed-off-by: -
Sascha Hauer authored
The EMMA (Enhanced Multimedia Engine) is divided into two parts, the postprocessor and the preprocessor. Fix the base addresses. Signed-off-by: -
Sascha Hauer authored
This one updates DMA support on MX2 which got broken in: [ARM] Hide ISA DMA API when ISA_DMA_API is unset Signed-off-by:
-
- 15 Dec, 2008 4 commits
-
-
Russell King authored
Merge branch 'omap3-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
-
-
Ian Molton authored
This patch adds the platform specific support needed to control the PCMCIA hardware on the Toshiba e740. Signed-off-by:Ian Molton <spyro@f2s.com>
-
Ian Molton authored
This patchset provides support for the TMIO based IO controller used in the Toshiba e-series PDAs. Signed-off-by:Samuel Ortiz <sameo@openedhand.com> Acked-by:
Eric Miao <eric.y.miao@gmail.com>
-
- 14 Dec, 2008 5 commits
-
-
Russell King authored
Signed-off-by:Russell King <rmk+kernel@arm.linux.org.uk>
-
Julia Lawall authored
As noted by Akinobu Mita in patch b1fceac2, alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; statement S; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...) ... when != E ( - BUG_ON (E == NULL); | - if (E == NULL) S ) @@ expression E,E1; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...) ... when != E - memset(E,0,E1); // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
-
