Skip to content

L
linux
Switch branch/tag
  1. 28 Feb, 2014 1 commit
  3. 27 Feb, 2014 9 commits
  5. 26 Feb, 2014 9 commits
    • Nikolay Aleksandrov's avatar
      bonding: fix a div error caused by the slave release path · ee6154e1
      Nikolay Aleksandrov authored 
      There's a bug in the slave release function which leads the transmit
functions which use the bond->slave_cnt to a div by 0 because we might
just have released our last slave and made slave_cnt == 0 but at the same
time we may have a transmitter after the check for an empty list which will
fetch it and use it in the slave id calculation.
Fix it by moving the slave_cnt after synchronize_rcu so if this was our
last slave any new transmitters will see an empty slave list which is
checked after rcu lock but before calling the mode transmit functions
which rely on bond->slave_cnt.

Fixes: 278b2083 ("bonding: initial RCU conversion")

CC: Veaceslav Falico <vfalico@redhat.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@redhat.com>
Acked-by: default avatarVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ee6154e1
    • Freddy Xin's avatar
      AX88179_178A: Add VID:DID for Lenovo OneLinkDock Gigabit LAN · e5fe0cd4
      Freddy Xin authored 
      Add VID:DID for Lenovo OneLinkDock Gigabit LAN
Signed-off-by: default avatarFreddy Xin <freddy@asix.com.tw>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e5fe0cd4
    • David S. Miller's avatar
      Merge branch 'bonding_rtnl' · 5d6dd5bf
      David S. Miller authored 
      Ding Tianhong says:

====================
Fix RTNL: assertion failed at net/core/rtnetlink.c

The commit 1d3ee88a
(bonding: add netlink attributes to slave link dev)
make the bond_set_active_slave() and bond_set_backup_slave()
use rtmsg_ifinfo to send slave's states and this functions
should be called in RTNL.

But the 902.3ad and ARP monitor did not hold the RTNL when calling
thses two functions, so fix them.

v1->v2: Add new micro to indicate that the notification should be send
        later, not never.
        And add a new patch to fix the same problem for ARP mode.

v2->v3: modify the bond_should_notify to should_notify_rtnl, it is more
	reasonable, and	use bool for should_notify_rtnl.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5d6dd5bf
    • dingtianhong's avatar
      bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor · b0929915
      dingtianhong authored 
      Veaceslav has reported and fix this problem by commit f2ebd477
(bonding: restructure locking of bond_ab_arp_probe()). According Jay's
opinion, the current solution is not very well, because the notification
is to indicate that the interface has actually changed state in a meaningful
way, but these calls in the ab ARP monitor are internal settings of the flags
to allow the ARP monitor to search for a slave to become active when there are
no active slaves. The flag setting to active or backup is to permit the ARP
monitor's response logic to do the right thing when deciding if the test
slave (current_arp_slave) is up or not.

So the best way to fix the problem is that we should not send a notification
when the slave is in testing state, and check the state at the end of the
monitor, if the slave's state recover, avoid to send pointless notification
twice. And RTNL is really a big lock, hold it regardless the slave's state
changed or not when the current_active_slave is null will loss performance
(every 100ms), so we should hold it only when the slave's state changed and
need to notify.

I revert the old commit and add new modifications.

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: default avatarDing Tianhong <dingtianhong@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b0929915
    • dingtianhong's avatar
      bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode · 5e5b0665
      dingtianhong authored 
      The problem was introduced by the commit 1d3ee88a
(bonding: add netlink attributes to slave link dev).
The bond_set_active_slave() and bond_set_backup_slave()
will use rtmsg_ifinfo to send slave's states, so these
two functions should be called in RTNL.

In 802.3ad mode, acquiring RTNL for the __enable_port and
__disable_port cases is difficult, as those calls generally
already hold the state machine lock, and cannot unconditionally
call rtnl_lock because either they already hold RTNL (for calls
via bond_3ad_unbind_slave) or due to the potential for deadlock
with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed,
bond_3ad_link_change, or bond_3ad_update_lacp_rate.  All four of
those are called with RTNL held, and acquire the state machine lock
second.  The calling contexts for __enable_port and __disable_port
already hold the state machine lock, and may or may not need RTNL.

According to the Jay's opinion, I don't think it is a problem that
the slave don't send notify message synchronously when the status
changed, normally the state machine is running every 100 ms, send
the notify message at the end of the state machine if the slave's
state changed should be better.

I fix the problem through these steps:

1). add a new function bond_set_slave_state() which could change
    the slave's state and call rtmsg_ifinfo() according to the input
    parameters called notify.

2). Add a new slave parameter which called should_notify, if the slave's state
    changed and don't notify yet, the parameter will be set to 1, and then if
    the slave's state changed again, the param will be set to 0, it indicate that
    the slave's state has been restored, no need to notify any one.

3). the __enable_port and __disable_port should not call rtmsg_ifinfo
    in the state machine lock, any change in the state of slave could
    set a flag in the slave, it will indicated that an rtmsg_ifinfo
    should be called at the end of the state machine.

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: default avatarDing Tianhong <dingtianhong@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5e5b0665
    • Joe Perches's avatar
      MAINTAINERS: Intel nic drivers · bc90d291
      Joe Perches authored 
      Add a new F: line for the intel subdirectories.

This allows get_maintainers to avoid using git log
and cc'ing people that have submitted clean-up style
patches for all first level directories under
drivers/net/ethernet/intel/

This does not make e100.c maintained.
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bc90d291
    • Edward Cree's avatar
      sfc: check for NULL efx->ptp_data in efx_ptp_event · 8f355e5c
      Edward Cree authored 
      If we receive a PTP event from the NIC when we haven't set up PTP state
in the driver, we attempt to read through a NULL pointer efx->ptp_data,
triggering a panic.
Signed-off-by: default avatarEdward Cree <ecree@solarflare.com>
Acked-by: default avatarShradha Shah <sshah@solarflare.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8f355e5c
    • Eric Dumazet's avatar
      net: tcp: use NET_INC_STATS() · 9a9bfd03
      Eric Dumazet authored 
      While LINUX_MIB_TCPSPURIOUS_RTX_HOSTQUEUES can only be incremented
in tcp_transmit_skb() from softirq (incoming message or timer
activation), it is better to use NET_INC_STATS() instead of
NET_INC_STATS_BH() as tcp_transmit_skb() can be called from process
context.

This will avoid copy/paste confusion when/if we want to add
other SNMP counters in tcp_transmit_skb()
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9a9bfd03
    • Steffen Klassert's avatar
      xfrm: Fix unlink race when policies are deleted. · 3a9016f9
      Steffen Klassert authored 
      When a policy is unlinked from the lists in thread context,
the xfrm timer can fire before we can mark this policy as dead.
So reinitialize the bydst hlist, then hlist_unhashed() will
notice that this policy is not linked and will avoid a
doulble unlink of that policy.
Reported-by: default avatarXianpeng Zhao <673321875@qq.com>
Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      3a9016f9
  7. 25 Feb, 2014 15 commits
  9. 24 Feb, 2014 6 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7