- 13 Feb, 2014 10 commits
-
-
Konrad Rzeszutek Wilk authored
commit 51c71a3b upstream. The user has the option of disabling the platform driver: 00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01) which is used to unplug the emulated drivers (IDE, Realtek 8169, etc) and allow the PV drivers to take over. If the user wishes to disable that they can set: xen_platform_pci=0 (in the guest config file) or xen_emul_unplug=never (on the Linux command line) except it does not work properly. The PV drivers still try to load and since the Xen platform driver is not run - and it has not initialized the grant tables, most of the PV drivers stumble upon: input: Xen Virtual Keyboard as /devices/virtual/input/input5 input: Xen Virtual Pointer as /devices/virtual/input/input6M ------------[ cut here ]------------ kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206! invalid opcode: 0000 [#1] SMP Modules linked in: xen_kbdfront(+) xenfs xen_privcmd CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1 Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013 RIP: 0010:[<ffffffff813ddc40>] [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300 Call Trace: [<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240 [<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70 [<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront] [<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront] [<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130 [<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50 [<ffffffff8145e9a9>] driver_probe_device+0x89/0x230 [<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0 [<ffffffff8145e7d9>] driver_attach+0x19/0x20 [<ffffffff8145e260>] bus_add_driver+0x1a0/0x220 [<ffffffff8145f1ff>] driver_register+0x5f/0xf0 [<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20 [<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40 [<ffffffffa0015000>] ? 0xffffffffa0014fff [<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront] [<ffffffff81002049>] do_one_initcall+0x49/0x170 .. snip.. which is hardly nice. This patch fixes this by having each PV driver check for: - if running in PV, then it is fine to execute (as that is their native environment). - if running in HVM, check if user wanted 'xen_emul_unplug=never', in which case bail out and don't load any PV drivers. - if running in HVM, and if PCI device 5853:0001 (xen_platform_pci) does not exist, then bail out and not load PV drivers. - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks', then bail out for all PV devices _except_ the block one. Ditto for the network one ('nics'). - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary' then load block PV driver, and also setup the legacy IDE paths. In (v3) make it actually load PV drivers. Reported-by: Sander Eikelenboom <linux@eikelenboom.it Reported-by:
Anthony PERARD <anthony.perard@citrix.com> Reported-and-Tested-by:
Fabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v2: Add extra logic to handle the myrid ways 'xen_emul_unplug' can be used per Ian and Stefano suggestion] [v3: Make the unnecessary case work properly] [v4: s/disks/ide-disks/ spotted by Fabio] Reviewed-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [for PCI parts] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
AKASHI Takahiro authored
commit 06bdadd7 upstream. audit_syscall_exit() saves a result of regs_return_value() in intermediate "int" variable and passes it to __audit_syscall_exit(), which expects its second argument as a "long" value. This will result in truncating the value returned by a system call and making a wrong audit record. I don't know why gcc compiler doesn't complain about this, but anyway it causes a problem at runtime on arm64 (and probably most 64-bit archs). Signed-off-by:
AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Eric Paris <eparis@redhat.com> Signed-off-by:
-
Richard Guy Briggs authored
commit e789e561 upstream. When the audit queue overflows and times out (audit_backlog_wait_time), the audit queue overflow timeout is set to zero. Once the audit queue overflow timeout condition recovers, the timeout should be reset to the original value. See also: https://lkml.org/lkml/2013/9/2/473Signed-off-by:
Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by:
Dan Duval <dan.duval@oracle.com> Signed-off-by:
Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit 28a625cb upstream. Having this struct in module memory could Oops when if the module is unloaded while the buffer still persists in a pipe. Since sock_pipe_buf_ops is essentially the same as fuse_dev_pipe_buf_steal merge them into nosteal_pipe_buf_ops (this is the same as default_pipe_buf_ops except stealing the page from the buffer is not allowed). Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Bjorn Helgaas authored
commit 765ee51f upstream. This reverts commit 26abfeed. In the eisa_probe() force_probe path, if we were unable to request slot resources (e.g., [io 0x800-0x8ff]), we skipped the slot with "Cannot allocate resource for EISA slot %d" before reading the EISA signature in eisa_init_device(). Commit 26abfeed moved eisa_init_device() earlier, so we tried to read the EISA signature before requesting the slot resources, and this caused hangs during boot. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1251816Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Alex Williamson authored
commit 08336fd2 upstream. dma_pte_free_level() has an off-by-one error when checking whether a pte is completely covered by a range. Take for example the case of attempting to free pfn 0x0 - 0x1ff, ie. 512 entries covering the first 2M superpage. The level_size() is 0x200 and we test: static void dma_pte_free_level(... ... if (!(0 > 0 || 0x1ff < 0 + 0x200)) { ... } Clearly the 2nd test is true, which means we fail to take the branch to clear and free the pagetable entry. As a result, we're leaking pagetables and failing to install new pages over the range. This was found with a PCI device assigned to a QEMU guest using vfio-pci without a VGA device present. The first 1M of guest address space is mapped with various combinations of 4K pages, but eventually the range is entirely freed and replaced with a 2M contiguous mapping. intel-iommu errors out with something like: ERROR: DMA PTE for vPFN 0x0 already set (to 5c2b8003 not 849c00083) In this case 5c2b8003 is the pointer to the previous leaf page that was neither freed nor cleared and 849c00083 is the superpage entry that we're trying to replace it with. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Wanlong Gao authored
commit 53a52f17 upstream. arch/sh/kernel/kgdb.c: In function 'sleeping_thread_to_gdb_regs': arch/sh/kernel/kgdb.c:225:32: error: implicit declaration of function 'task_stack_page' [-Werror=implicit-function-declaration] arch/sh/kernel/kgdb.c:242:23: error: dereferencing pointer to incomplete type arch/sh/kernel/kgdb.c:243:22: error: dereferencing pointer to incomplete type arch/sh/kernel/kgdb.c: In function 'singlestep_trap_handler': arch/sh/kernel/kgdb.c:310:27: error: 'SIGTRAP' undeclared (first use in this function) arch/sh/kernel/kgdb.c:310:27: note: each undeclared identifier is reported only once for each function it appears in This was introduced by commit 16559ae4 ("kgdb: remove #include <linux/serial_8250.h> from kgdb.h"). [geert@linux-m68k.org: reworded and reformatted] Signed-off-by:
Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@linux-m68k.org> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
-
Steven Rostedt (Red Hat) authored
commit 3132e107 upstream. If trace_puts() is used very early in boot up, it can crash the machine if it is called before the ring buffer is allocated. If a trace_printk() is used with no arguments, then it will be converted into a trace_puts() and suffer the same fate. Fixes: 09ae7234 "tracing: Add trace_puts() for even faster trace_printk() tracing" Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit dced341b upstream. The trace buffer has a descriptor pointer that goes back to the trace array. But it was never assigned. Luckily, nothing uses it (yet), but it will in the future. Although nothing currently uses this, if any of the new features get backported to older kernels, and because this is such a simple change, I'm marking it for stable too. Fixes: 12883efb "tracing: Consolidate max_tr into main trace_array structure" Signed-off-by:
-
Tetsuo Handa authored
commit 8ed81460 upstream. Hello. I got below leak with linux-3.10.0-54.0.1.el7.x86_64 . [ 681.903890] kmemleak: 5538 new suspected memory leaks (see /sys/kernel/debug/kmemleak) Below is a patch, but I don't know whether we need special handing for undoing ebitmap_set_bit() call. ---------- >>From fe97527a90fe95e2239dfbaa7558f0ed559c0992 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Date: Mon, 6 Jan 2014 16:30:21 +0900 Subject: SELinux: Fix memory leak upon loading policy Commit 2463c26d "SELinux: put name based create rules in a hashtable" did not check return value from hashtab_insert() in filename_trans_read(). It leaks memory if hashtab_insert() returns error. unreferenced object 0xffff88005c9160d0 (size 8): comm "systemd", pid 1, jiffies 4294688674 (age 235.265s) hex dump (first 8 bytes): 57 0b 00 00 6b 6b 6b a5 W...kkk. backtrace: [<ffffffff816604ae>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811cba5e>] kmem_cache_alloc_trace+0x12e/0x360 [<ffffffff812aec5d>] policydb_read+0xd1d/0xf70 [<ffffffff812b345c>] security_load_policy+0x6c/0x500 [<ffffffff812a623c>] sel_write_load+0xac/0x750 [<ffffffff811eb680>] vfs_write+0xc0/0x1f0 [<ffffffff811ec08c>] SyS_write+0x4c/0xa0 [<ffffffff81690419>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff However, we should not return EEXIST error to the caller, or the systemd will show below message and the boot sequence freezes. systemd[1]: Failed to load SELinux policy. Freezing. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
- 06 Feb, 2014 30 commits
-
-
Greg Kroah-Hartman authored
-
Borislav Petkov authored
commit 3b564968 upstream. This adds the workaround for erratum 793 as a precaution in case not every BIOS implements it. This addresses CVE-2013-6885. Erratum text: [Revision Guide for AMD Family 16h Models 00h-0Fh Processors, document 51810 Rev. 3.04 November 2013] 793 Specific Combination of Writes to Write Combined Memory Types and Locked Instructions May Cause Core Hang Description Under a highly specific and detailed set of internal timing conditions, a locked instruction may trigger a timing sequence whereby the write to a write combined memory type is not flushed, causing the locked instruction to stall indefinitely. Potential Effect on System Processor core hang. Suggested Workaround BIOS should set MSR C001_1020[15] = 1b. Fix Planned No fix planned [ hpa: updated description, fixed typo in MSR name ] Signed-off-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20140114230711.GS29865@pd.tnicTested-by:
Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Paul Mackerras authored
commit 91b973f9 upstream. The code in remove_cache_dir() is supposed to remove the "cache" subdirectory from the sysfs directory for a CPU when that CPU is being offlined. It tries to do this by calling kobject_put() on the kobject for the subdirectory. However, the subdirectory only gets removed once the last reference goes away, and the reference being put here may well not be the last reference. That means that the "cache" subdirectory may still exist when the offlining operation has finished. If the same CPU subsequently gets onlined, the code tries to add a new "cache" subdirectory. If the old subdirectory has not yet been removed, we get a WARN_ON in the sysfs code, with stack trace, and an error message printed on the console. Further, we ultimately end up with an online cpu with no "cache" subdirectory. This fixes it by doing an explicit kobject_del() at the point where we want the subdirectory to go away. kobject_del() removes the sysfs directory even though the object still exists in memory. The object will get freed at some point in the future. A subsequent onlining operation can create a new sysfs directory, even if the old object still exists in memory, without causing any problems. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Srivatsa S. Bhat authored
commit d4edc5b6 upstream. On POWER platforms, the hypervisor can notify the guest kernel about dynamic changes in the cpu-numa associativity (VPHN topology update). Hence the cpu-to-node mappings that we got from the firmware during boot, may no longer be valid after such updates. This is handled using the arch_update_cpu_topology() hook in the scheduler, and the sched-domains are rebuilt according to the new mappings. But unfortunately, at the moment, CPU hotplug ignores these updated mappings and instead queries the firmware for the cpu-to-numa relationships and uses them during CPU online. So the kernel can end up assigning wrong NUMA nodes to CPUs during subsequent CPU hotplug online operations (after booting). Further, a particularly problematic scenario can result from this bug: On POWER platforms, the SMT mode can be switched between 1, 2, 4 (and even 8) threads per core. The switch to Single-Threaded (ST) mode is performed by offlining all except the first CPU thread in each core. Switching back to SMT mode involves onlining those other threads back, in each core. Now consider this scenario: 1. During boot, the kernel gets the cpu-to-node mappings from the firmware and assigns the CPUs to NUMA nodes appropriately, during CPU online. 2. Later on, the hypervisor updates the cpu-to-node mappings dynamically and communicates this update to the kernel. The kernel in turn updates its cpu-to-node associations and rebuilds its sched domains. Everything is fine so far. 3. Now, the user switches the machine from SMT to ST mode (say, by running ppc64_cpu --smt=1). This involves offlining all except 1 thread in each core. 4. The user then tries to switch back from ST to SMT mode (say, by running ppc64_cpu --smt=4), and this involves onlining those threads back. Since CPU hotplug ignores the new mappings, it queries the firmware and tries to associate the newly onlined sibling threads to the old NUMA nodes. This results in sibling threads within the same core getting associated with different NUMA nodes, which is incorrect. The scheduler's build-sched-domains code gets thoroughly confused with this and enters an infinite loop and causes soft-lockups, as explained in detail in commit 3be7db6a (powerpc: VPHN topology change updates all siblings). So to fix this, use the numa_cpu_lookup_table to remember the updated cpu-to-node mappings, and use them during CPU hotplug online operations. Further, we also need to ensure that all threads in a core are assigned to a common NUMA node, irrespective of whether all those threads were online during the topology update. To achieve this, we take care not to use cpu_sibling_mask() since it is not hotplug invariant. Instead, we use cpu_first_sibling_thread() and set up the mappings manually using the 'threads_per_core' value for that particular platform. This helps us ensure that we don't hit this bug with any combination of CPU hotplug and SMT mode switching. Signed-off-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
-
David Sterba authored
commit d0242061 upstream. Currently, any user can snapshot any subvolume if the path is accessible and thus indirectly create and keep files he does not own under his direcotries. This is not possible with traditional directories. In security context, a user can snapshot root filesystem and pin any potentially buggy binaries, even if the updates are applied. All the snapshots are visible to the administrator, so it's possible to verify if there are suspicious snapshots. Another more practical problem is that any user can pin the space used by eg. root and cause ENOSPC. Original report: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/484786Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Wang Shilong authored
commit 90515e7f upstream. We may return early in btrfs_drop_snapshot(), we shouldn't call btrfs_std_err() for this case, fix it. Signed-off-by:
Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by:
-
Andy Grover authored
commit ee291e63 upstream. When creating network portals rapidly, such as when restoring a configuration, LIO's code to reuse existing portals can return a false negative if the thread hasn't run yet and set np_thread_state to ISCSI_NP_THREAD_ACTIVE. This causes an error in the network stack when attempting to bind to the same address/port. This patch sets NP_THREAD_ACTIVE before the np is placed on g_np_list, so even if the thread hasn't run yet, iscsit_get_np will return the existing np. Also, convert np_lock -> np_mutex + hold across adding new net portal to g_np_list to prevent a race where two threads may attempt to create the same network portal, resulting in one of them failing. (nab: Add missing mutex_unlocks in iscsit_add_np failure paths) (DanC: Fix incorrect spin_unlock -> spin_unlock_bh) Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 4a4caa29 upstream. This patch addresses an traditional iscsi-target fabric ack starvation issue where iscsit_allocate_cmd() -> percpu_ida_alloc_state() ends up hitting slow path percpu-ida code, because iscsit_ack_from_expstatsn() is expected to free ack'ed tags after tag allocation. This is done to take into account the tags waiting to be acknowledged and released in iscsit_ack_from_expstatsn(), but who's number are not directly limited by the CmdSN Window queue_depth being enforced by the target. So that said, this patch bumps up the pre-allocated number of per session tags to: (max(queue_depth, ISCSIT_MIN_TAGS) * 2) + ISCSIT_EXTRA_TAGS for good measure to avoid the percpu_ida_alloc_state() slow path. Signed-off-by:
-
Asias He authored
commit f466f753 upstream. vqs are freed in virtscsi_freeze but the hotcpu_notifier is not unregistered. We will have a use-after-free usage when the notifier callback is called after virtscsi_freeze. Fixes: 285e71ea ("virtio-scsi: reset virtqueue affinity when doing cpu hotplug") Signed-off-by:
Asias He <asias.hejun@gmail.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Vijaya Mohan Guvva authored
commit dcaf9aed upstream. Bfa driver crash is observed while pushing the firmware on to chinook quad port card due to uninitialized bfi_image_ct2 access which gets initialized only for CT2 ASIC based cards after request_firmware(). For quard port chinook (CT2 ASIC based), bfi_image_ct2 is not getting initialized as there is no check for chinook PCI device ID before request_firmware and instead bfi_image_cb is initialized as it is the default case for card type check. This patch includes changes to read the right firmware for quad port chinook. Signed-off-by:
Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Thomas Pugliese authored
commit 83e83ecb upstream. There is no need to skip querying the config and string descriptors for unauthorized WUSB devices when usb_new_device is called. It is allowed by WUSB spec. The only action that needs to be delayed until authorization time is the set config. This change allows user mode tools to see the config and string descriptors earlier in enumeration which is needed for some WUSB devices to function properly on Android systems. It also reduces the amount of divergent code paths needed for WUSB devices. Signed-off-by:
Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
commit 2cbe5c76 upstream. Previously, hpfs scanned all bitmaps each time the user asked for free space using statfs. This patch changes it so that hpfs scans the bitmaps only once, remembes the free space and on next invocation of statfs it returns the value instantly. New versions of wine are hammering on the statfs syscall very heavily, making some games unplayable when they're stored on hpfs, with load times in minutes. This should be backported to the stable kernels because it fixes user-visible problem (excessive level load times in wine). Signed-off-by:
Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by:
-
Stephen Warren authored
(This is upstream 75fae117 "ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled", backported to stable 3.10 through 3.12. 3.13 and later can take the original patch.) Commit 384a48d7 "ALSA: hda: HDMI: Support codecs with fewer cvts than pins" dynamically enabled each pin widget's PIN_OUT only when the pin was actively in use. This was required on certain NVIDIA CODECs for correct operation. Specifically, if multiple pin widgets each had their mux input select the same audio converter widget and each pin widget had PIN_OUT enabled, then only one of the pin widgets would actually receive the audio, and often not the one the user wanted! However, this apparently broke some Intel systems, and commit 6169b673 "ALSA: hda - Always turn on pins for HDMI/DP" reverted the dynamic setting of PIN_OUT. This in turn broke the afore-mentioned NVIDIA CODECs. This change supports either dynamic or static handling of PIN_OUT, selected by a flag set up during CODEC initialization. This flag is enabled for all recent NVIDIA GPUs. Reported-by:
Uosis <uosisl@gmail.com> Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
Anssi Hannula authored
(This is a backport of *part* of upstream 611885bc "ALSA: hda - hdmi: Disallow unsupported 2ch remapping on NVIDIA codecs" to stable 3.10 through 3.12. Later stable already contain all of the original patch.) Mainline commit 611885bc "ALSA: hda - hdmi: Disallow unsupported 2ch remapping on NVIDIA codecs" introduces function patch_nvhdmi(). That function is edited by 75fae117 "ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled". In order to backport the PIN_OUT patch, I am first back-porting just the addition of function patch_nvhdmi(), so that the conflicts applying the PIN_OUT patch are simplified. Ideally, one might backport all of 611885bc. However, that commit doesn't apply to stable kernels, since it relies on a chain of other patches which implement new features. Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by:
Takashi Iwai <tiwai@suse.de> [swarren, extracted just a small part of the original patch] Signed-off-by:
-
Takashi Iwai authored
commit cbd209f4 upstream. Some old AD codecs don't like the independent HP handling, either it contains a single DAC (AD1981) or it mandates the mixer routing (AD1986A). This patch removes the indep_hp flag for such codecs. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=68081Signed-off-by:
-
Mihai Caraman authored
commit 70713fe3 upstream. Use gva_t instead of unsigned int for eaddr in deliver_tlb_miss(). Signed-off-by:
Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
-
Andreas Schwab authored
commit 48eaef05 upstream. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
-
Helge Deller authored
commit 57737c49 upstream. This commit: f8dae006: parisc: Ensure full cache coherency for kmap/kunmap caused negative caching side-effects, e.g. hanging processes with expect and too many inequivalent alias messages from flush_dcache_page() on Debian 5 systems. This patch now partly reverts it and has been in production use on our debian buildd makeservers since a week without any major problems. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
-
Mikulas Patocka authored
commit 0ef38d70 upstream. The patch 3ddc5b46 breaks networking on alpha (there is a follow-up fix 5cfe8f1b, but networking is still broken even with the second patch). The patch 3ddc5b46 makes csum_partial_copy_from_user check the pointer with access_ok. However, csum_partial_copy_from_user is called also from csum_partial_copy_nocheck and csum_partial_copy_nocheck is called on kernel pointers and it is supposed not to check pointer validity. This bug results in ssh session hangs if the system is loaded and bulk data are printed to ssh terminal. This patch fixes csum_partial_copy_nocheck to call set_fs(KERNEL_DS), so that access_ok in csum_partial_copy_from_user accepts kernel-space addresses. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
-
Neal Cardwell authored
[ Based upon upstream commit 70315d22 ] Fix inet_diag_dump_icsk() to reflect the fact that both TIME_WAIT and FIN_WAIT2 connections are represented by inet_timewait_sock (not just TIME_WAIT). Thus: (a) We need to iterate through the time_wait buckets if the user wants either TIME_WAIT or FIN_WAIT2. (Before fixing this, "ss -nemoi state fin-wait-2" would not return any sockets, even if there were some in FIN_WAIT2.) (b) We need to check tw_substate to see if the user wants to dump sockets in the particular substate (TIME_WAIT or FIN_WAIT2) that a given connection is in. (Before fixing this, "ss -nemoi state time-wait" would actually return sockets in state FIN_WAIT2.) An analogous fix is in v3.13: 70315d22 ("inet_diag: fix inet_diag_dump_icsk() to use correct state for timewait sockets") but that patch is quite different because 3.13 code is very different in this area due to the unification of TCP hash tables in 05dbc7b5 ("tcp/dccp: remove twchain") in v3.13-rc1. I tested that this applies cleanly between v3.3 and v3.12, and tested that it works in both 3.3 and 3.12. It does not apply cleanly to 3.2 and earlier (though it makes semantic sense), and semantically is not the right fix for 3.13 and beyond (as mentioned above). Signed-off-by:
Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Duan Jiong authored
[ Upstream commit c0c0c50f ] When dealing with icmp messages, the skb->data points the ip header that triggered the sending of the icmp message. In gre_cisco_err(), the parse_gre_header() is called, and the iptunnel_pull_header() is called to pull the skb at the end of the parse_gre_header(), so the skb->data doesn't point the inner ip header. Unfortunately, the ipgre_err still needs those ip addresses in inner ip header to look up tunnel by ip_tunnel_lookup(). So just use icmp_hdr() to get inner ip header instead of skb->data. Signed-off-by:
Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by:
-
Annie Li authored
[ Upstream commit cefe0078 ] This patch removes grant transfer releasing code from netfront, and uses gnttab_end_foreign_access to end grant access since gnttab_end_foreign_access_ref may fail when the grant entry is currently used for reading or writing. * clean up grant transfer code kept from old netfront(2.6.18) which grants pages for access/map and transfer. But grant transfer is deprecated in current netfront, so remove corresponding release code for transfer. * fix resource leak, release grant access (through gnttab_end_foreign_access) and skb for tx/rx path, use get_page to ensure page is released when grant access is completed successfully. Xen-blkfront/xen-tpmfront/xen-pcifront also have similar issue, but patches for them will be created separately. V6: Correct subject line and commit message. V5: Remove unecessary change in xennet_end_access. V4: Revert put_page in gnttab_end_foreign_access, and keep netfront change in single patch. V3: Changes as suggestion from David Vrabel, ensure pages are not freed untill grant acess is ended. V2: Improve patch comments. Signed-off-by:
Annie Li <annie.li@oracle.com> Signed-off-by:
-
Holger Eitzenberger authored
[ Upstream commit a452ce34 ] I see a memory leak when using a transparent HTTP proxy using TPROXY together with TCP early demux and Kernel v3.8.13.15 (Ubuntu stable): unreferenced object 0xffff88008cba4a40 (size 1696): comm "softirq", pid 0, jiffies 4294944115 (age 8907.520s) hex dump (first 32 bytes): 0a e0 20 6a 40 04 1b 37 92 be 32 e2 e8 b4 00 00 .. j@..7..2..... 02 00 07 01 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff810b710a>] kmem_cache_alloc+0xad/0xb9 [<ffffffff81270185>] sk_prot_alloc+0x29/0xc5 [<ffffffff812702cf>] sk_clone_lock+0x14/0x283 [<ffffffff812aaf3a>] inet_csk_clone_lock+0xf/0x7b [<ffffffff8129a893>] netlink_broadcast+0x14/0x16 [<ffffffff812c1573>] tcp_create_openreq_child+0x1b/0x4c3 [<ffffffff812c033e>] tcp_v4_syn_recv_sock+0x38/0x25d [<ffffffff812c13e4>] tcp_check_req+0x25c/0x3d0 [<ffffffff812bf87a>] tcp_v4_do_rcv+0x287/0x40e [<ffffffff812a08a7>] ip_route_input_noref+0x843/0xa55 [<ffffffff812bfeca>] tcp_v4_rcv+0x4c9/0x725 [<ffffffff812a26f4>] ip_local_deliver_finish+0xe9/0x154 [<ffffffff8127a927>] __netif_receive_skb+0x4b2/0x514 [<ffffffff8127aa77>] process_backlog+0xee/0x1c5 [<ffffffff8127c949>] net_rx_action+0xa7/0x200 [<ffffffff81209d86>] add_interrupt_randomness+0x39/0x157 But there are many more, resulting in the machine going OOM after some days. From looking at the TPROXY code, and with help from Florian, I see that the memory leak is introduced in tcp_v4_early_demux(): void tcp_v4_early_demux(struct sk_buff *skb) { /* ... */ iph = ip_hdr(skb); th = tcp_hdr(skb); if (th->doff < sizeof(struct tcphdr) / 4) return; sk = __inet_lookup_established(dev_net(skb->dev), &tcp_hashinfo, iph->saddr, th->source, iph->daddr, ntohs(th->dest), skb->skb_iif); if (sk) { skb->sk = sk; where the socket is assigned unconditionally to skb->sk, also bumping the refcnt on it. This is problematic, because in our case the skb has already a socket assigned in the TPROXY target. This then results in the leak I see. The very same issue seems to be with IPv6, but haven't tested. Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by:
-
Oliver Hartkopp authored
[ Upstream commit a0065f26 ] The two commits 0115e8e3 (net: remove delay at device dismantle) and 748e2d93 (net: reinstate rtnl in call_netdevice_notifiers()) silently removed a NULL pointer check for in_dev since Linux 3.7. This patch re-introduces this check as it causes crashing the kernel when setting small mtu values on non-ip capable netdevices. Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Acked-by:
-
Or Gerlitz authored
[ Upstream commit d0bc6555 ] Make sure the practice set by commit 0afb1666 "vxlan: Add capability of Rx checksum offload for inner packet" is applied when the skb goes through the portion of the RX code which is shared between vxlan netdevices and ovs vxlan port instances. Cc: Joseph Gasparakis <joseph.gasparakis@intel.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Duan Jiong authored
[ Upstream commit 11c21a30 ] commit a6222602("ip_tunnel: fix kernel panic with icmp_dest_unreach") clear IPCB in ip_tunnel_xmit() , or else skb->cb[] may contain garbage from GSO segmentation layer. But commit 0e6fbc5b("ip_tunnels: extend iptunnel_xmit()") refactor codes, and it clear IPCB behind the dst_link_failure(). So clear IPCB in ip_tunnel_xmit() just like commti a6222602("ip_tunnel: fix kernel panic with icmp_dest_unreach"). Signed-off-by:
-
Heiko Carstens authored
[ Upstream commit 3af57f78 ] The s390 bpf jit compiler emits the signed divide instructions "dr" and "d" for unsigned divisions. This can cause problems: the dividend will be zero extended to a 64 bit value and the divisor is the 32 bit signed value as specified A or X accumulator, even though A and X are supposed to be treated as unsigned values. The divide instrunctions will generate an exception if the result cannot be expressed with a 32 bit signed value. This is the case if e.g. the dividend is 0xffffffff and the divisor either 1 or also 0xffffffff (signed: -1). To avoid all these issues simply use unsigned divide instructions. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit aee636c4 ] At first Jakub Zawadzki noticed that some divisions by reciprocal_divide were not correct. (off by one in some cases) http://www.wireshark.org/~darkjames/reciprocal-buggy.c He could also show this with BPF: http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c The reciprocal divide in linux kernel is not generic enough, lets remove its use in BPF, as it is not worth the pain with current cpus. Signed-off-by:
Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Daniel Borkmann <dxchgb@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Matt Evans <matt@ozlabs.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Christoph Paasch authored
[ Upstream commit 77f99ad1 ] Because the tcp-metrics is an RCU-list, it may be that two soft-interrupts are inside __tcp_get_metrics() for the same destination-IP at the same time. If this destination-IP is not yet part of the tcp-metrics, both soft-interrupts will end up in tcpm_new and create a new entry for this IP. So, we will have two tcp-metrics with the same destination-IP in the list. This patch checks twice __tcp_get_metrics(). First without holding the lock, then while holding the lock. The second one is there to confirm that the entry has not been added by another soft-irq while waiting for the spin-lock. Fixes: 51c5d0c4 (tcp: Maintain dynamic metrics in local cache.) Signed-off-by:
Christoph Paasch <christoph.paasch@uclouvain.be> Reviewed-by:
-
Gerald Schaefer authored
[ Upstream commit c196403b ] commit ae4b46e9 "net: rds: use this_cpu_* per-cpu helper" broke per-cpu handling for rds. chpfirst is the result of __this_cpu_read(), so it is an absolute pointer and not __percpu. Therefore, __this_cpu_write() should not operate on chpfirst, but rather on cache->percpu->first, just like __this_cpu_read() did before. Signed-off-byd Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
