Support for enslaving ports to LAGs with uppers will be added in the
following patches. Selftests to make sure it actually does the right thing
are ready and will be sent as a follow-up.

Similarly, ordering of MACVLAN creation and RIF creation will be relaxed
and it will be permitted to create a MACVLAN first.

Thus these two tests are obsolete. Drop them.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a front panel joins a bridge via another netdevice (typically a LAG),
the driver needs to learn about the objects configured on the bridge port.
When the bridge port is offloaded by the driver for the first time, this
can be achieved by passing a notifier to switchdev_bridge_port_offload().
The notifier is then invoked for the individual objects (such as VLANs)
configured on the bridge, and can look for the interesting ones.

Calling switchdev_bridge_port_offload() when the second port joins the
bridge lower is unnecessary, but the replay is still needed. To that end,
add a new function, switchdev_bridge_port_replay(), which does only the
replay part of the _offload() function in exactly the same way as that
function.

Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Ivan Vecera <ivecera@redhat.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two kinds of MDB entries to be replayed: port MDB entries, and
host MDB entries. They are both replayed by br_switchdev_mdb_replay(). If
the driver supports one kind, but lacks the other, the first -EOPNOTSUPP
returned terminates the whole replay, including any further still-supported
objects in the list.

For this to cause issues, there must be MDB entries for both the host and
the port being replayed. In that case, if the driver bails out from
handling the host entry, the port entries are never replayed. However, the
replay is currently only done when a switchdev port joins a bridge. There
would be no port memberships at that point. Thus despite being erroneous,
the code does not cause observable bugs.

This is not an issue with other object kinds either, because there, each
function replays one object kind. If a driver does not support that kind,
it makes sense to bail out early. -EOPNOTSUPP is then ignored in
nbp_switchdev_sync_objs().

For MDB, suppress the -EOPNOTSUPP error code in br_switchdev_mdb_replay()
already, so that the whole list gets replayed.

The reason we need this patch is that a future patch will introduce a
replay that should be used when a front-panel port netdevice is enslaved to
a bridge lower, in particular a LAG. The LAG netdevice can already have
both host and port MDB entries. The port entries need to be replayed so
that they are offloaded on the port that joins the LAG.

Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Ivan Vecera <ivecera@redhat.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce MTK_FOE_ENTRY_V{1,2}_SIZE macros in order to make more
explicit foe_entry size for different chipset revisions.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Benjamin Poirier says:

====================
nexthop: Refactor and fix nexthop selection for multipath routes

In order to select a nexthop for multipath routes, fib_select_multipath()
is used with legacy nexthops and nexthop_select_path_hthr() is used with
nexthop objects. Those two functions perform a validity test on the
neighbor related to each nexthop but their logic is structured differently.
This causes a divergence in behavior and nexthop_select_path_hthr() may
return a nexthop that failed the neighbor validity test even if there was
one that passed.

Refactor nexthop_select_path_hthr() to make it more similar to
fib_select_multipath() and fix the problem mentioned above.

v1: https://lore.kernel.org/netdev/20230529201914.69828-1-bpoirier@nvidia.com/
====================

Link: https://lore.kernel.org/r/20230719-nh_select-v2-0-04383e89f868@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add test cases for hash threshold (multipath) nexthop groups with invalid
neighbors. Check that a nexthop with invalid neighbor is not selected when
there is another nexthop with a valid neighbor. Check that there is no
crash when there is no nexthop with a valid neighbor.

The first test fails before the previous commit in this series.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230719-nh_select-v2-4-04383e89f868@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With legacy nexthops, when net.ipv4.fib_multipath_use_neigh is set,
fib_select_multipath() will never set res->nhc to a nexthop that is not
good (as per fib_good_nh()). OTOH, with nexthop objects,
nexthop_select_path_hthr() may return a nexthop that failed the
nexthop_is_good_nh() test even if there was one that passed. Refactor
nexthop_select_path_hthr() to follow a selection logic more similar to
fib_select_multipath().

The issue can be demonstrated with the following sequence of commands. The
first block shows that things work as expected with legacy nexthops. The
last sequence of `ip rou get` in the second block shows the problem case -
some routes still use the .2 nexthop.

sysctl net.ipv4.fib_multipath_use_neigh=1
ip link add dummy1 up type dummy
ip rou add 198.51.100.0/24 nexthop via 192.0.2.1 dev dummy1 onlink nexthop via 192.0.2.2 dev dummy1 onlink
for i in {10..19}; do ip -o rou get 198.51.100.$i; done
ip neigh add 192.0.2.1 dev dummy1 nud failed
echo ".1 failed:"  # results should not use .1
for i in {10..19}; do ip -o rou get 198.51.100.$i; done
ip neigh del 192.0.2.1 dev dummy1
ip neigh add 192.0.2.2 dev dummy1 nud failed
echo ".2 failed:"  # results should not use .2
for i in {10..19}; do ip -o rou get 198.51.100.$i; done
ip link del dummy1

ip link add dummy1 up type dummy
ip nexthop add id 1 via 192.0.2.1 dev dummy1 onlink
ip nexthop add id 2 via 192.0.2.2 dev dummy1 onlink
ip nexthop add id 1001 group 1/2
ip rou add 198.51.100.0/24 nhid 1001
for i in {10..19}; do ip -o rou get 198.51.100.$i; done
ip neigh add 192.0.2.1 dev dummy1 nud failed
echo ".1 failed:"  # results should not use .1
for i in {10..19}; do ip -o rou get 198.51.100.$i; done
ip neigh del 192.0.2.1 dev dummy1
ip neigh add 192.0.2.2 dev dummy1 nud failed
echo ".2 failed:"  # results should not use .2
for i in {10..19}; do ip -o rou get 198.51.100.$i; done
ip link del dummy1
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230719-nh_select-v2-3-04383e89f868@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

For legacy nexthops, there is fib_good_nh() to check the neighbor validity.
In order to make the nexthop object code more similar to the legacy nexthop
code, factor out the nexthop object neighbor validity check into its own
function.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230719-nh_select-v2-2-04383e89f868@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The loop in nexthop_select_path_hthr() includes code to check for neighbor
validity. Since this does not apply to fdb nexthops, simplify the loop by
moving the fdb nexthop selection to its own function.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230719-nh_select-v2-1-04383e89f868@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jakub Kicinski says:

====================
eth: bnxt: handle invalid Tx completions more gracefully

bnxt trusts the events generated by the device which may lead to kernel
crashes. These are extremely rare but they do happen. For a while
I thought crashing may be intentional, because device reporting invalid
completions should never happen, and having a core dump could be useful
if it does. But in practice I haven't found any clues in the core dumps,
and panic_on_warn exists.

Series was tested by forcing the recovery path manually. Because of
how rare the real crashes are I can't confirm it works for the actual
device errors until it's been widely deployed.

v1: https://lore.kernel.org/all/20230710205611.1198878-1-kuba@kernel.org/
====================

Link: https://lore.kernel.org/r/20230720010440.1967136-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Invalid Tx completions should never happen (tm) but when they do
they crash the host, because driver blindly trusts that there is
a valid skb pointer on the ring.

The completions I've seen appear to be some form of FW / HW
miscalculation or staleness, they have typical (small) values
(<100), but they are most often higher than number of queued
descriptors. They usually happen after boot.

Instead of crashing, print a warning and schedule a reset.

Link: https://lore.kernel.org/r/20230720010440.1967136-4-kuba@kernel.orgReviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Most callers of bnxt_queue_sp_work() set a bit to indicate what work
to perform right before calling it. Pass it to the function instead.

Link: https://lore.kernel.org/r/20230720010440.1967136-3-kuba@kernel.orgReviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move the reset helpers, subsequent patches will need some
of them on the Tx path.

While at it rename bnxt_sched_reset(), on more recent chips
it schedules a queue reset, instead of a fuller reset.

Link: https://lore.kernel.org/r/20230720010440.1967136-2-kuba@kernel.orgReviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from BPF, netfilter, bluetooth and CAN.

  Current release - regressions:

   - eth: r8169: multiple fixes for PCIe ASPM-related problems

   - vrf: fix RCU lockdep splat in output path

  Previous releases - regressions:

   - gso: fall back to SW segmenting with GSO_UDP_L4 dodgy bit set

   - dsa: mv88e6xxx: do a final check before timing out when polling

   - nf_tables: fix sleep in atomic in nft_chain_validate

  Previous releases - always broken:

   - sched: fix undoing tcf_bind_filter() in multiple classifiers

   - bpf, arm64: fix BTI type used for freplace attached functions

   - can: gs_usb: fix time stamp counter initialization

   - nft_set_pipapo: fix improper element removal (leading to UAF)

  Misc:

   - net: support STP on bridge in non-root netns, STP prevents packet
     loops so not supporting it results in freezing systems of
     unsuspecting users, and in turn very upset noises being made

   - fix kdoc warnings

   - annotate various bits of TCP state to prevent data races"

* tag 'net-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
  net: phy: prevent stale pointer dereference in phy_init()
  tcp: annotate data-races around fastopenq.max_qlen
  tcp: annotate data-races around icsk->icsk_user_timeout
  tcp: annotate data-races around tp->notsent_lowat
  tcp: annotate data-races around rskq_defer_accept
  tcp: annotate data-races around tp->linger2
  tcp: annotate data-races around icsk->icsk_syn_retries
  tcp: annotate data-races around tp->keepalive_probes
  tcp: annotate data-races around tp->keepalive_intvl
  tcp: annotate data-races around tp->keepalive_time
  tcp: annotate data-races around tp->tsoffset
  tcp: annotate data-races around tp->tcp_tx_delay
  Bluetooth: MGMT: Use correct address for memcpy()
  Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
  Bluetooth: SCO: fix sco_conn related locking and validity issues
  Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
  Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
  Bluetooth: coredump: fix building with coredump disabled
  Bluetooth: ISO: fix iso_conn related locking and validity issues
  Bluetooth: hci_event: call disconnect callback before deleting conn
  ...

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fix building with coredump disabled
 - Fix use-after-free in hci_remove_adv_monitor
 - Use RCU for hci_conn_params and iterate safely in hci_sync
 - Fix locking issues on ISO and SCO
 - Fix bluetooth on Intel Macbook 2014

* tag 'for-net-2023-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: MGMT: Use correct address for memcpy()
  Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
  Bluetooth: SCO: fix sco_conn related locking and validity issues
  Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
  Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
  Bluetooth: coredump: fix building with coredump disabled
  Bluetooth: ISO: fix iso_conn related locking and validity issues
  Bluetooth: hci_event: call disconnect callback before deleting conn
  Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync
====================

Link: https://lore.kernel.org/r/20230720190201.446469-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Florian Westphal says:

====================
Netfilter fixes for net:

The following patchset contains Netfilter fixes for net:

1. Fix spurious -EEXIST error from userspace due to
   padding holes, this was broken since 4.9 days
   when 'ignore duplicate entries on insert' feature was
   added.

2. Fix a sched-while-atomic bug, present since 5.19.

3. Properly remove elements if they lack an "end range".
   nft userspace always sets an end range attribute, even
   when its the same as the start, but the abi doesn't
   have such a restriction. Always broken since it was
   added in 5.6, all three from myself.

4 + 5: Bound chain needs to be skipped in netns release
   and on rule flush paths, from Pablo Neira.

* tag 'nf-23-07-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: skip bound chain on rule flush
  netfilter: nf_tables: skip bound chain in netns release path
  netfilter: nft_set_pipapo: fix improper element removal
  netfilter: nf_tables: can't schedule in nft_chain_validate
  netfilter: nf_tables: fix spurious set element insertion failure
====================

Link: https://lore.kernel.org/r/20230720165143.30208-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

mdio_bus_init() and phy_driver_register() both have error paths, and if
those are ever hit, ethtool will have a stale pointer to the
phy_ethtool_phy_ops stub structure, which references memory from a
module that failed to load (phylib).

It is probably hard to force an error in this code path even manually,
but the error teardown path of phy_init() should be the same as
phy_exit(), which is now simply not the case.

Fixes: 55d8f053 ("net: phy: Register ethtool PHY operations")
Link: https://lore.kernel.org/netdev/ZLaiJ4G6TaJYGJyU@shell.armlinux.org.uk/Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230720000231.1939689-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet says:

====================
tcp: add missing annotations

This series was inspired by one syzbot (KCSAN) report.

do_tcp_getsockopt() does not lock the socket, we need to
annotate most of the reads there (and other places as well).

This is a first round, another series will come later.
====================

Link: https://lore.kernel.org/r/20230719212857.3943972-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This field can be read locklessly.

Fixes: 1536e285 ("tcp: Add a TCP_FASTOPEN socket option to get a max backlog on its listner")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-12-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This field can be read locklessly from do_tcp_getsockopt()

Fixes: dca43c75 ("tcp: Add TCP_USER_TIMEOUT socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-11-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tp->notsent_lowat can be read locklessly from do_tcp_getsockopt()
and tcp_poll().

Fixes: c9bee3b7 ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-10-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() reads rskq_defer_accept while another cpu
might change its value.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-9-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() reads tp->linger2 while another cpu
might change its value.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-8-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() and reqsk_timer_handler() read
icsk->icsk_syn_retries while another cpu might change its value.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-7-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() reads tp->keepalive_probes while another cpu
might change its value.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-6-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() reads tp->keepalive_intvl while another cpu
might change its value.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-5-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() reads tp->keepalive_time while another cpu
might change its value.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-4-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() reads tp->tsoffset while another cpu
might change its value.

Fixes: 93be6ce0 ("tcp: set and get per-socket timestamp")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-3-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() reads tp->tcp_tx_delay while another cpu
might change its value.

Fixes: a842fe14 ("tcp: add optional per socket transmit delay")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-2-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In function ‘fortify_memcpy_chk’,
    inlined from ‘get_conn_info_complete’ at net/bluetooth/mgmt.c:7281:2:
include/linux/fortify-string.h:592:25: error: call to
‘__read_overflow2_field’ declared with attribute warning: detected read
beyond size of field (2nd parameter); maybe use struct_group()?
[-Werror=attribute-warning]
  592 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

This is due to the wrong member is used for memcpy(). Use correct one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Commit c13380a5 ("Bluetooth: btusb: Do not require hardcoded
interface numbers") inadvertedly broke bluetooth on Intel Macbook 2014.
The intention was to keep behavior intact when BTUSB_IFNUM_2 is set and
otherwise allow any interface numbers. The problem is that the new logic
condition omits the case where bInterfaceNumber is 0.

Fix BTUSB_IFNUM_2 handling by allowing both interface number 0 and 2
when the flag is set.

Fixes: c13380a5 ("Bluetooth: btusb: Do not require hardcoded interface numbers")
Reported-by: John Holland <johnbholland@icloud.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217651Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Tested-by: John Holland<johnbholland@icloud.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Operations that check/update sk_state and access conn should hold
lock_sock, otherwise they can race.

The order of taking locks is hci_dev_lock > lock_sock > sco_conn_lock,
which is how it is in connect/disconnect_cfm -> sco_conn_del ->
sco_chan_del.

Fix locking in sco_connect to take lock_sock around updating sk_state
and conn.

sco_conn_del must not occur during sco_connect, as it frees the
sco_conn. Hold hdev->lock longer to prevent that.

sco_conn_add shall return sco_conn with valid hcon. Make it so also when
reusing an old SCO connection waiting for disconnect timeout (see
__sco_sock_close where conn->hcon is set to NULL).

This should not reintroduce the issue fixed in the earlier
commit 9a8ec9e8 ("Bluetooth: SCO: Fix possible circular locking
dependency on sco_connect_cfm"), the relevant fix of releasing lock_sock
in sco_sock_connect before acquiring hdev->lock is retained.

These changes mirror similar fixes earlier in ISO sockets.

Fixes: 9a8ec9e8 ("Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

hci_connect_sco currently returns NULL when there is no link (i.e. when
hci_conn_link() returns NULL).

sco_connect() expects an ERR_PTR in case of any error (see line 266 in
sco.c). Thus, hcon set as NULL passes through to sco_conn_add(), which
tries to get hcon->hdev, resulting in dereferencing a NULL pointer as
reported by syzkaller.

The same issue exists for iso_connect_cis() calling hci_connect_cis().

Thus, make hci_connect_sco() and hci_connect_cis() return ERR_PTR
instead of NULL.

Reported-and-tested-by: syzbot+37acd5d80d00d609d233@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=37acd5d80d00d609d233
Fixes: 06149746 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

KASAN reports that there's a use-after-free in
hci_remove_adv_monitor(). Trawling through the disassembly, you can
see that the complaint is from the access in bt_dev_dbg() under the
HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because
msft_remove_monitor() can end up freeing the monitor
structure. Specifically:
  hci_remove_adv_monitor() ->
  msft_remove_monitor() ->
  msft_remove_monitor_sync() ->
  msft_le_cancel_monitor_advertisement_cb() ->
  hci_free_adv_monitor()

Let's fix the problem by just stashing the relevant data when it's
still valid.

Fixes: 7cf5c297 ("Bluetooth: hci_sync: Refactor remove Adv Monitor")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The btmtk driver uses an IS_ENABLED() check to conditionally compile
the coredump support, but this fails to build because the hdev->dump
member is in an #ifdef:

drivers/bluetooth/btmtk.c: In function 'btmtk_process_coredump':
drivers/bluetooth/btmtk.c:386:30: error: 'struct hci_dev' has no member named 'dump'
  386 |   schedule_delayed_work(&hdev->dump.dump_timeout,
      |                              ^~

The struct member doesn't really make a huge difference in the total size,
so just remove the #ifdef around it to avoid adding similar checks
around each user.

Fixes: 872f8c253cb9e ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Fixes: 9695ef87 ("Bluetooth: Add support for hci devcoredump")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations
that check/update sk_state and access conn should hold lock_sock,
otherwise they can race.

The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock,
which is how it is in connect/disconnect_cfm -> iso_conn_del ->
iso_chan_del.

Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock
around updating sk_state and conn.

iso_conn_del must not occur during iso_connect_cis/bis, as it frees the
iso_conn. Hold hdev->lock longer to prevent that.

This should not reintroduce the issue fixed in commit 241f5193
("Bluetooth: ISO: Avoid circular locking dependency"), since the we
acquire locks in order. We retain the fix in iso_sock_connect to release
lock_sock before iso_connect_* acquires hdev->lock.

Similarly for commit 6a5ad251 ("Bluetooth: ISO: Fix possible
circular locking dependency"). We retain the fix in iso_conn_ready to
not acquire iso_conn_lock before lock_sock.

iso_conn_add shall return iso_conn with valid hcon. Make it so also when
reusing an old CIS connection waiting for disconnect timeout (see
__iso_sock_close where conn->hcon is set to NULL).

Trace with iso_conn_del after iso_chan_add in iso_connect_cis:
===============================================================
iso_sock_create:771: sock 00000000be9b69b7
iso_sock_init:693: sk 000000004dff667e
iso_sock_bind:827: sk 000000004dff667e 70:1a:b8:98:ff:a2 type 1
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_connect:875: sk 000000004dff667e
iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da
iso_conn_add:140: hcon 000000007b65d182 conn 00000000daf8625e
__iso_chan_add:214: conn 00000000daf8625e
iso_connect_cfm:1700: hcon 000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12
iso_conn_del:187: hcon 000000007b65d182 conn 00000000daf8625e, err 16
iso_sock_clear_timer:117: sock 000000004dff667e state 3
    <Note: sk_state is BT_BOUND (3), so iso_connect_cis is still
    running at this point>
iso_chan_del:153: sk 000000004dff667e, conn 00000000daf8625e, err 16
hci_conn_del:1151: hci0 hcon 000000007b65d182 handle 65535
hci_conn_unlink:1102: hci0: hcon 000000007b65d182
hci_chan_list_flush:2780: hcon 000000007b65d182
iso_sock_getsockopt:1376: sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getsockopt:1376: sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_shutdown:1434: sock 00000000be9b69b7, sk 000000004dff667e, how 1
__iso_sock_close:632: sk 000000004dff667e state 5 socket 00000000be9b69b7
     <Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets
     BT_CLOSED (6). Only iso_connect_cis sets it to BT_CONNECT, so it
     must be that iso_chan_del occurred between iso_chan_add and end of
     iso_connect_cis.>
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 8000000006467067 P4D 8000000006467067 PUD 3f5f067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:__iso_sock_close (net/bluetooth/iso.c:664) bluetooth
===============================================================

Trace with iso_conn_del before iso_chan_add in iso_connect_cis:
===============================================================
iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
...
iso_conn_add:140: hcon 0000000093bc551f conn 00000000768ae504
hci_dev_put:1487: hci0 orig refcnt 21
hci_event_packet:7607: hci0: event 0x0e
hci_cmd_complete_evt:4231: hci0: opcode 0x2062
hci_cc_le_set_cig_params:3846: hci0: status 0x07
hci_sent_cmd_data:3107: hci0 opcode 0x2062
iso_connect_cfm:1703: hcon 0000000093bc551f bdaddr 28:3d:c2:4a:7e:da status 7
iso_conn_del:187: hcon 0000000093bc551f conn 00000000768ae504, err 12
hci_conn_del:1151: hci0 hcon 0000000093bc551f handle 65535
hci_conn_unlink:1102: hci0: hcon 0000000093bc551f
hci_chan_list_flush:2780: hcon 0000000093bc551f
__iso_chan_add:214: conn 00000000768ae504
    <Note: this conn was already freed in iso_conn_del above>
iso_sock_clear_timer:117: sock 0000000098323f95 state 3
general protection fault, probably for non-canonical address 0x30b29c630930aec8: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1920 Comm: bluetoothd Tainted: G            E      6.3.0-rc7+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:detach_if_pending+0x28/0xd0
Code: 90 90 0f 1f 44 00 00 48 8b 47 08 48 85 c0 0f 84 ad 00 00 00 55 89 d5 53 48 83 3f 00 48 89 fb 74 7d 66 90 48 8b 03 48 8b 53 08 <>
RSP: 0018:ffffb90841a67d08 EFLAGS: 00010007
RAX: 0000000000000000 RBX: ffff9141bd5061b8 RCX: 0000000000000000
RDX: 30b29c630930aec8 RSI: ffff9141fdd21e80 RDI: ffff9141bd5061b8
RBP: 0000000000000001 R08: 0000000000000000 R09: ffffb90841a67b88
R10: 0000000000000003 R11: ffffffff8613f558 R12: ffff9141fdd21e80
R13: 0000000000000000 R14: ffff9141b5976010 R15: ffff914185755338
FS:  00007f45768bd840(0000) GS:ffff9141fdd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000619000424074 CR3: 0000000009f5e005 CR4: 0000000000170ee0
Call Trace:
 <TASK>
 timer_delete+0x48/0x80
 try_to_grab_pending+0xdf/0x170
 __cancel_work+0x37/0xb0
 iso_connect_cis+0x141/0x400 [bluetooth]
===============================================================

Trace with NULL conn->hcon in state BT_CONNECT:
===============================================================
__iso_sock_close:619: sk 00000000f7c71fc5 state 1 socket 00000000d90c5fe5
...
__iso_sock_close:619: sk 00000000f7c71fc5 state 8 socket 00000000d90c5fe5
iso_chan_del:153: sk 00000000f7c71fc5, conn 0000000022c03a7e, err 104
...
iso_sock_connect:862: sk 00000000129b56c3
iso_connect_cis:348: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7d:2a
hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7d:2a
hci_dev_hold:1495: hci0 orig refcnt 19
__iso_chan_add:214: conn 0000000022c03a7e
    <Note: reusing old conn>
iso_sock_clear_timer:117: sock 00000000129b56c3 state 3
...
iso_sock_ready:1485: sk 00000000129b56c3
...
iso_sock_sendmsg:1077: sock 00000000e5013966, sk 00000000129b56c3
BUG: kernel NULL pointer dereference, address: 00000000000006a8
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1403 Comm: wireplumber Tainted: G            E      6.3.0-rc7+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:iso_sock_sendmsg+0x63/0x2a0 [bluetooth]
===============================================================

Fixes: 241f5193 ("Bluetooth: ISO: Avoid circular locking dependency")
Fixes: 6a5ad251 ("Bluetooth: ISO: Fix possible circular locking dependency")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

In hci_cs_disconnect, we do hci_conn_del even if disconnection failed.

ISO, L2CAP and SCO connections refer to the hci_conn without
hci_conn_get, so disconn_cfm must be called so they can clean up their
conn, otherwise use-after-free occurs.

ISO:
==========================================================
iso_sock_connect:880: sk 00000000eabd6557
iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
...
iso_conn_add:140: hcon 000000001696f1fd conn 00000000b6251073
hci_dev_put:1487: hci0 orig refcnt 17
__iso_chan_add:214: conn 00000000b6251073
iso_sock_clear_timer:117: sock 00000000eabd6557 state 3
...
hci_rx_work:4085: hci0 Event packet
hci_event_packet:7601: hci0: event 0x0f
hci_cmd_status_evt:4346: hci0: opcode 0x0406
hci_cs_disconnect:2760: hci0: status 0x0c
hci_sent_cmd_data:3107: hci0 opcode 0x0406
hci_conn_del:1151: hci0 hcon 000000001696f1fd handle 2560
hci_conn_unlink:1102: hci0: hcon 000000001696f1fd
hci_conn_drop:1451: hcon 00000000d8521aaf orig refcnt 2
hci_chan_list_flush:2780: hcon 000000001696f1fd
hci_dev_put:1487: hci0 orig refcnt 21
hci_dev_put:1487: hci0 orig refcnt 20
hci_req_cmd_complete:3978: opcode 0x0406 status 0x0c
... <no iso_* activity on sk/conn> ...
iso_sock_sendmsg:1098: sock 00000000dea5e2e0, sk 00000000eabd6557
BUG: kernel NULL pointer dereference, address: 0000000000000668
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:iso_sock_sendmsg (net/bluetooth/iso.c:1112) bluetooth
==========================================================

L2CAP:
==================================================================
hci_cmd_status_evt:4359: hci0: opcode 0x0406
hci_cs_disconnect:2760: hci0: status 0x0c
hci_sent_cmd_data:3085: hci0 opcode 0x0406
hci_conn_del:1151: hci0 hcon ffff88800c999000 handle 3585
hci_conn_unlink:1102: hci0: hcon ffff88800c999000
hci_chan_list_flush:2780: hcon ffff88800c999000
hci_chan_del:2761: hci0 hcon ffff88800c999000 chan ffff888018ddd280
...
BUG: KASAN: slab-use-after-free in hci_send_acl+0x2d/0x540 [bluetooth]
Read of size 8 at addr ffff888018ddd298 by task bluetoothd/1175

CPU: 0 PID: 1175 Comm: bluetoothd Tainted: G            E      6.4.0-rc4+ #2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x5b/0x90
 print_report+0xcf/0x670
 ? __virt_addr_valid+0xf8/0x180
 ? hci_send_acl+0x2d/0x540 [bluetooth]
 kasan_report+0xa8/0xe0
 ? hci_send_acl+0x2d/0x540 [bluetooth]
 hci_send_acl+0x2d/0x540 [bluetooth]
 ? __pfx___lock_acquire+0x10/0x10
 l2cap_chan_send+0x1fd/0x1300 [bluetooth]
 ? l2cap_sock_sendmsg+0xf2/0x170 [bluetooth]
 ? __pfx_l2cap_chan_send+0x10/0x10 [bluetooth]
 ? lock_release+0x1d5/0x3c0
 ? mark_held_locks+0x1a/0x90
 l2cap_sock_sendmsg+0x100/0x170 [bluetooth]
 sock_write_iter+0x275/0x280
 ? __pfx_sock_write_iter+0x10/0x10
 ? __pfx___lock_acquire+0x10/0x10
 do_iter_readv_writev+0x176/0x220
 ? __pfx_do_iter_readv_writev+0x10/0x10
 ? find_held_lock+0x83/0xa0
 ? selinux_file_permission+0x13e/0x210
 do_iter_write+0xda/0x340
 vfs_writev+0x1b4/0x400
 ? __pfx_vfs_writev+0x10/0x10
 ? __seccomp_filter+0x112/0x750
 ? populate_seccomp_data+0x182/0x220
 ? __fget_light+0xdf/0x100
 ? do_writev+0x19d/0x210
 do_writev+0x19d/0x210
 ? __pfx_do_writev+0x10/0x10
 ? mark_held_locks+0x1a/0x90
 do_syscall_64+0x60/0x90
 ? lockdep_hardirqs_on_prepare+0x149/0x210
 ? do_syscall_64+0x6c/0x90
 ? lockdep_hardirqs_on_prepare+0x149/0x210
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7ff45cb23e64
Code: 15 d1 1f 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d 9d a7 0d 00 00 74 13 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
RSP: 002b:00007fff21ae09b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007ff45cb23e64
RDX: 0000000000000001 RSI: 00007fff21ae0aa0 RDI: 0000000000000017
RBP: 00007fff21ae0aa0 R08: 000000000095a8a0 R09: 0000607000053f40
R10: 0000000000000001 R11: 0000000000000202 R12: 00007fff21ae0ac0
R13: 00000fffe435c150 R14: 00007fff21ae0a80 R15: 000060f000000040
 </TASK>

Allocated by task 771:
 kasan_save_stack+0x33/0x60
 kasan_set_track+0x25/0x30
 __kasan_kmalloc+0xaa/0xb0
 hci_chan_create+0x67/0x1b0 [bluetooth]
 l2cap_conn_add.part.0+0x17/0x590 [bluetooth]
 l2cap_connect_cfm+0x266/0x6b0 [bluetooth]
 hci_le_remote_feat_complete_evt+0x167/0x310 [bluetooth]
 hci_event_packet+0x38d/0x800 [bluetooth]
 hci_rx_work+0x287/0xb20 [bluetooth]
 process_one_work+0x4f7/0x970
 worker_thread+0x8f/0x620
 kthread+0x17f/0x1c0
 ret_from_fork+0x2c/0x50

Freed by task 771:
 kasan_save_stack+0x33/0x60
 kasan_set_track+0x25/0x30
 kasan_save_free_info+0x2e/0x50
 ____kasan_slab_free+0x169/0x1c0
 slab_free_freelist_hook+0x9e/0x1c0
 __kmem_cache_free+0xc0/0x310
 hci_chan_list_flush+0x46/0x90 [bluetooth]
 hci_conn_cleanup+0x7d/0x330 [bluetooth]
 hci_cs_disconnect+0x35d/0x530 [bluetooth]
 hci_cmd_status_evt+0xef/0x2b0 [bluetooth]
 hci_event_packet+0x38d/0x800 [bluetooth]
 hci_rx_work+0x287/0xb20 [bluetooth]
 process_one_work+0x4f7/0x970
 worker_thread+0x8f/0x620
 kthread+0x17f/0x1c0
 ret_from_fork+0x2c/0x50
==================================================================

Fixes: b8d29052 ("Bluetooth: clean up connection in hci_cs_disconnect")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

hci_update_accept_list_sync iterates over hdev->pend_le_conns and
hdev->pend_le_reports, and waits for controller events in the loop body,
without holding hdev lock.

Meanwhile, these lists and the items may be modified e.g. by
le_scan_cleanup. This can invalidate the list cursor or any other item
in the list, resulting to invalid behavior (eg use-after-free).

Use RCU for the hci_conn_params action lists. Since the loop bodies in
hci_sync block and we cannot use RCU or hdev->lock for the whole loop,
copy list items first and then iterate on the copy. Only the flags field
is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we
read valid values.

Free params everywhere with hci_conn_params_free so the cleanup is
guaranteed to be done properly.

This fixes the following, which can be triggered e.g. by BlueZ new
mgmt-tester case "Add + Remove Device Nowait - Success", or by changing
hci_le_set_cig_params to always return false, and running iso-tester:

==================================================================
BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32

Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107)
print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65)
? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
kasan_report (mm/kasan/report.c:538)
? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780)
? mutex_lock (kernel/locking/mutex.c:282)
? __pfx_mutex_lock (kernel/locking/mutex.c:282)
? __pfx_mutex_unlock (kernel/locking/mutex.c:538)
? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861)
hci_cmd_sync_work (net/bluetooth/hci_sync.c:306)
process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)
? __pfx_worker_thread (kernel/workqueue.c:2480)
kthread (kernel/kthread.c:376)
? __pfx_kthread (kernel/kthread.c:331)
ret_from_fork (arch/x86/entry/entry_64.S:314)
</TASK>

Allocated by task 31:
kasan_save_stack (mm/kasan/common.c:46)
kasan_set_track (mm/kasan/common.c:52)
__kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383)
hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277)
hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589)
hci_connect_cis (net/bluetooth/hci_conn.c:2266)
iso_connect_cis (net/bluetooth/iso.c:390)
iso_sock_connect (net/bluetooth/iso.c:899)
__sys_connect (net/socket.c:2003 net/socket.c:2020)
__x64_sys_connect (net/socket.c:2027)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

Freed by task 15:
kasan_save_stack (mm/kasan/common.c:46)
kasan_set_track (mm/kasan/common.c:52)
kasan_save_free_info (mm/kasan/generic.c:523)
__kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244)
__kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800)
hci_conn_params_del (net/bluetooth/hci_core.c:2323)
le_scan_cleanup (net/bluetooth/hci_conn.c:202)
process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)
kthread (kernel/kthread.c:376)
ret_from_fork (arch/x86/entry/entry_64.S:314)
==================================================================

Fixes: e8907f76 ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Pull iomap fix from Darrick Wong:
 "Fix partial write regression.

  It turns out that fstests doesn't have any test coverage for short
  writes, but LTP does. Fortunately, this was caught right after -rc1
  was tagged.

  Summary:

   - Fix a bug wherein a failed write could clobber short write status"

* tag 'iomap-6.5-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: micro optimize the ki_pos assignment in iomap_file_buffered_write
  iomap: fix a regression for partial write errors